HT201471 blank screen only shows the apple icon.
new update was download to my ipad 4th and now the screen is blank and only shows the apple icon. ipad was charged. not able to get anything up on screen. anyone having issues after the lates update download?
Your iPad is in recovery mode.
Follow directions to fix.
http://support.apple.com/kb/HT1808
Similar Messages
-
I was looking through my pictures and when i tapped to see a specific one my ipod blacked out. Now the screen only shows the apple icon and I cant go anywhere. I tried preshing the on/off and home button but it won't work. I even pressed both at the same time for 10 seconds and still nothing... I connected it to my lap top and went to my itunes account but it tells me that the device that i just plugged in has an error. I already tried plugging it back in several times and it still won't work. I don't know what else to do. I havn't had it for a whole year yet so its still insured to the apple company right? at least thats what I heard
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
can't locate the serial number the phone only shows the apple icon I charged it. I will only show the apple icon?
If you decide that you want to Restore the iPhone Firmware then. Open iTunes on computer, connect iPhone to computer with USB cable. Hold both home and power buttons for exactly 10 seconds, then release the Power button, keep holding the Home button for about another 20 seconds, until iTunes recognizes the iPhone in Recovery Mode. If the iPhone screen is black this is good. Restore the iPhone Firmware. If you get Recovery Mode but the iPhone shows the iTunes screen you can try to Restore, but if it fails, do the instructions again until you get Recovery Mode with black iPhone screen.
-
My Ipad device is only showing the apple icon nothing else is happening..what's wrong
How do I get my screen to come back on, it is only showing the apple icon.
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, if you have IOS-7, read this. -
I don't know what to do. It is only showing the apple icon. I've tried turning it on and off and it just stays on the icon. It also wont connect to my computer so I can;t restore it like I have been told to do. So should I take it into an apple store? Or is it a lost cause..??
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
while updating my ipod touch something happened and now the screen only shows the apple logo that goes on-off. i dont know what to do,please somebody help me!
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Phone got wet,now it's only showing the apple icon and sometimes connect to itunes
3gs phone got wet,now it's only showing the apple icon alternating with connect to itunes
You didn't connect it to your computer or to power, did you?
Wipe it down, put it in a baggie with raw rice or new silica gel packets and set it in a cool, dry area, like a cupboard. Leave it there for 3 - 4 days.
Take it out after this time, wipe it off, use a soft brush to wipe any rice dust from the dock connector, and connect it to your wall charger. Let it charge for at least 30 minutes and then Reset it while it is connected to power. May take several tries. If it revives fully charge it.
If this does not work you can do an out-of-warranty replacement with Apple for $199 USD. -
HT201210 the screen on my ipod touch will only show the apple icon it will not turn all the way on
the screen on my ipod touch only shows the apple logo.it will not shut off or turn all the way on and when plugged into itunes it will not allow the newest update
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
UPdate the iPad wjith new iOS upgrade that where shown under settings on the iPad, but after I did the upgrade the screen has only shown the apple and I can't get back. This has been the case since yesterday. Have turned off t.he iPad many times, but every timebwkhen Ibturn it on again the screen onöy show the apple icon and nothing else happends. What should I do? Anyone having the same problem and how can this be solved?
Did you try to connect in recovery mode, explained in this article?
iOS: Unable to update or restore -
HT2101 My IPOD touch just died. It only shows the apple icon. What can I do?
I was trying to upload a change to an app and my IPOD died. It shows the Apple logo and notheing else
Hello Tolhurst,
We have an iPod Touch assistant that should be helpful in getting your iPod Touch working again.
Frozen or unresponsive iPod touch
http://www.apple.com/support/ipodtouch/assistant/ipodtouch/
If you continue to have trouble getting the iPod Touch working again, I'd recommend putting the device into recovery mode and attempting a restore that way.
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Cheers,
Allen -
My iphone screen only show the apple logo only
when i updated my iphone, suddently my usb no work now stop already. then it only show on my monitoe is the apple logo only.
cannot restart, cannot do anything. Please help me solve the problem. i scared.Did you try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again?
If this does not work, try to connect in recovery mode and restore again, explained in this article:
iOS: Unable to update or restore -
HT4623 I switch off my iPhone during update and now it only shows the apple icon?
I switched off my I phone during a update , now it will not switch on properly, only apple icon appears?
Reset, hold both Home and Power buttons until the iPhone restarts. This usually takes about 10 seconds of holding both buttons. If still problem you should Restore your iPhone with iTunes on computer. Here are simple steps. Open iTunes on computer. Connect iPhone to computer. Hold both home and power buttons until iTunes recognizes iPhone in Recovery Mode. Usually takes about 20 seconds of holding both buttons. Click Restore Button of iTunes.
-
My phone functions but the screen only shows the apple logo
I have an iPhone 4S and it randomly froze and the screen went directly to the apple logo. It still works like music can come on and it buzzes when it's plugged in. The only other problem is that I can't use my lock button since it's been broken for a while. Please help I really need to get this fixed ASAP.
M_Moreno631 wrote:
I have an iPhone 4S and it randomly froze and the screen went directly to the apple logo.
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
Restoring > http://support.apple.com/kb/HT1414
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
M_Moreno631 wrote:
I... The only other problem is that I can't use my lock button since it's been broken for a while. ...
This poses a severe Limitation on Troubleshooting... Suggest you Visit an Apple Store or AASP (Authorized Apple Service Provider) for the Broken Lock Button issue.
Be sure to make an appointment first... -
A newer verion update for my iPod touch was taking place when I got knocked off line,Now,I have no connection to be able to use my iPod.Just a Black screen with the Apple insignia and an oblong circle that would have filled when the update was finished appears and the iPod won't turn on or off. What can I do to remedy the situation.?
Try putting the iPad into recovery mode and see if that fixes it : http://support.apple.com/kb/ht4097
-
My phone will only show the apple icon and shut off.
My phone will only turn on for like 30 seconds, and then shuts off, and it won't sync to iTunes. When I took it to an AT&T store, they told me it just needed updated, but iTunes is not finding my phone when I plug it up. Does anyone know how to fix this problem?
Mine is doing the same thing - started two days ago. Yesterday it came back by itself literally whilst sitting on the table, but slow, finally returning to normal speed after about 3 hours, then locked and reverted to the apple symbol, where it's been for 24 hrs. Have tried all the things on the previous post's link. At a loss!!!!!
Maybe you are looking for
-
Why i can't see video but i can hear an audio when i'm playing a video from a website?
THank you
-
Calling a PL/SQL function returning Netsed Table Rows
Hi, I am trying to call a Function which returns Nested Table rows (as Out Parameter) in Java . When I am trying to use pstmt.registerOutParameter(3, OracleTypes.OTHER); to capture the Out parameter in Java code , I get the follwoing error : java.sql
-
PP 2010 and PS2010 - Project can not been saved - Error ID : 9000(0x2328)
Multiple users are receiving Error ID : 9000(0x2328) when trying to save to the Project Server. We have tried Save for Share and that has been unsuccessful. Is anyone aware of any other methods to resolve this issue?
-
Weblogic clustering - Non session objects
Hi, I have an app that doesn't have any HttpSession object or EJBs. We have only one servlet for entire application that works as a controller and we store all the information regarding the user in the servlet instance variable as cache. None of our
-
Hi, My Italian web designer created a template on Pages 09 with my company logo. The problem is that once installed in my template folder, the paragraph styles (as well as other things) appears in Italian instead of English. However, the language is