HT201493 why the app don't use coordinate as alternative to addresses?
why the app don't use coordinate as alternative to addresses. because the maps in the most area outside USA are very poor.
There is an iPhone YouTube app in the App Store. Until Google develops an app for the iPad, you can use the mobile site or the iPhone app.
Similar Messages
-
Why the App Store ask for sq.after using it for years and how do find the answers
Why the App Store ask for sq.after using it for years and how do find the answers
Reset security questions
http://support.apple.com/kb/HT5312
If you do not have a Rescue email, you need to contact apple support, they will guide you through the process of resetting your security questions.
https://ssl.apple.com/emea/support/itunes/contact.html -
Hello! I change my ID Apple and now when I try to make an update, Iphone show me my old ID and ask the password. Why is that? Why the phone don't see my new ID Apple? I can not make any update because the old Apple ID don't work any more. I check and I have my new user all over in my phone. Help me please!
All apps are tied to the Apple ID that downloaded them.
They can not be transferred to a new Apple ID.
You will have to use the Apple ID and password used to download them.
If you do not wish to do so, erase them and download them under the new ID. This will wipe any data in the app and you will have to pay for them again. -
When I send Outlook invites to my iPhone (via email) the appointments appear 3 hours earlier? The time setting appears to be EST which is accurate so I can't figure out why the appointments don't appear in real time. Thanks for your help, Ellen
1) The best way to relocate the iTunes library folder is to move the entire iTunes folder with all subfolders to the new path, then press and hold down shift as start iTunes and keep holding until prompted to choose a library, then browse to the relocated folder and open the file iTunes Library.itl inside it.
If you've done something different then provide some more details about what is where and I should be able to help.
2) Purchases on the device should automatically transfer to a Purchased on <DeviceName> playlist, but it my depend a bit on whether automatic iCloud downloads are enabled. If there is a cloudy link then the transfer might not happen. You can use File > Devices > Transfer Purchases. In iTunes you should also check out iTunes Store > Quick Links > Purchased > Music > Not on this computer.
3) Backup the device, then immediately restore it. In some cases you need to add a restore as new device into that equation. Obbviously not to be attempted until you're sure all your media is in your library. See Recover your iTunes library from your iPod or iOS device should it be needed.
4) I believe there is complimentary 1 incident 90-day support with hardware purchases, but no free software support for iTunes itself. AppleCare gets you a different level of support.
tt2 -
How do I remove an old username from the app store when using the update function
How do I remove an old username from the app store when using the update function.
I purchased my Mac used. The former owners username prepopulates when I try to perform the updated function on the app store. It does not allow me to use a different user name. I have created my own username and password. I have even been able to purchase items from the app store, it's just when I use the update function it does populate with my username. Any help is appreciated.The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You — not the previous owner — must do that. How you do it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
1. You don't own another Mac.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. For early MBA models, you may need a USB optical drive or Remote Disc. You should have received the media from the previous owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
2. You do own another Mac.
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to create a bootable USB device and boot the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can boot from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
Once booted in Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
After partitioning, quit Disk Utility and run the OS X Installer. You will need the Apple ID and password that you used to upgrade. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
Then run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Apple customer service has sometimes issued redemption codes for these apps to second owners who asked.
If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support. -
Help!(confused face) I'm new with flash and don't know why the timers don't work like i would expect
I'm new with flash and don't know why the timers don't work like i would expect. In VB.NET timers are how you move stuff, but it doesn't look like they are ideal for moving stuff in flash at all (really slow). I'm making a game in which you throw a ball around the screen. i am using a timer to get the ball to move. this doesn't work well for 2 reasons; 1: the ball jumps alot, and 2: the timer should eventually run out of time. If anyone can help, i'd be thrilled cus this is my first post here, so yeah
Timing for movement would be more often dealt with using something that operates at the frame rate of the file. The ENTER_FRAME event is usually selected for this purpose.
stage.addEventListener(Event.ENTER_FRAME, moveBall);
function moveBall(evt:Event):void {
// your positioning code
You could use a Timer to control when to stop the listener from being active. -
HT4972 Why the IOS7 don't comes in iPod touch 4g
Why the IOS7 don't comes in iPod touch 4g
That model lacks the hardware needed to run iOS 7.
See the chart below to determine whether you can upgrade your device and what you can upgrade to. If you do not have a Software Update option present on your iDevice, then you are trying to upgrade to iOS 5 or higher. You will have to connect your device to your computer and open iTunes in order to upgrade.
IPhone, iPod Touch, and iPad iOS Compatibility Chart
Device iOS Verson
iPhone 1 iOS 3.1.3
iPhone 3G iOS 4.2.1
iPhone 3GS iOS 6.1.x
iPhone 4 iOS 7.0.x
iPhone 4S iOS 7.0.x
iPhone 5 iOS 7.0.x
iPhone 5c iOS 7.0.x
iPhone 5s iOS 7.0.x
iPod Touch 1 iOS 3.1.3
iPod Touch 2 iOS 4.2.1
iPod Touch 3 iOS 5.1.1
iPod Touch 4 iOS 6.1.x
iPod Touch 5 iOS 7.0.x
iPad 1 iOS 5.1.1
iPad 2 iOS 7.0.x
iPad 3 iOS 7.0.x
iPad 4 iOS 7.0.x
iPad Mini iOS 7.0.x
iPad Air iOS 7.0.x
=====================================
Select the method most appropriate for your situation.
Upgrading iOS
1. How to update your iPhone, iPad, or iPod Touch
2. iPhone Support
3. iPod Touch Support
4. iPad Support
a. Updating Your iOS to Version 6.0.x from iOS 5
Tap Settings > General > Software Update
If an update is available there will be an active Update button. If you are current,
then you will see a gray screen with a message saying your are up to date.
b. If you are still using iOS 4 — Updating your device to iOS 5 or later.
c. Resolving update problems
1. iOS - Unable to update or restore
2. iOS- Resolving update and restore alert messages -
HT2534 how can I logon to the app's store using a different itunes account
how can I logon to the app's store using a different itunes account?
You can log out of the currently logged in account on your iPhone by tapping on your id in Settings > iTunes & App Stores and logging out, and you then log in with a different account. But any content downloaded via the currently logged in account will remain tied to that account, and if you use iTunes match, automatic downloads or re-download past purchases for an account then you risk tying the iPhone to that account for 90 days : http://support.apple.com/kb/HT4627
-
I have no idea whether there is a causal relationship but since moving to Lion and iCloud, my iMac has become so unresponsive that I wind up having to crash and restart most of the time. This is true regardless of the app I am using at the time.
The specs of this iMac are:
iMac 27 inch, late 2009 model with a 3.0 GHz Intel Core 2 Duo with 4 Gig 1067 Mhz DDR3, using OSX Lion 10.7.4 (11E53)
I have Mackeeper installed and according to the scans I have run, everything is fine. No virus, no junk files . . . no problems at all . . .
Except that for all practical purposes, my computer isn't working.
I am nearly totally deaf and live in an isolated, rural area of NW Missouri and this computer is what I mainly rely on to contact friends, relatives and business associtates!
Any and all suggestions will be greatly appreciated!First, back up all data immediately, as your boot drive may be failing.
If you have more than ten or so files or folders on your Desktop, move them, temporarily at least, somewhere else in your home folder.
If iCloud is enabled, disable it.
Disconnect all wired peripherals except keyboard, mouse, and monitor, if applicable. Launch the usual set of applications you use when you notice the problem.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Activity Monitor in the page that opens.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Step 2
You must be logged in as an administrator to carry out this step.
Launch the Console application in the same way as above. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Post the 50 or so most recent messages in the log — the text, please, not a screenshot.
Important: Some personal information, such as your name, may appear in the log. Edit it out before posting. -
How can I get the App store to use money in my account rather than a credit card when I want to buy something?
The iTunes/Mac App Stores use credit on an account first. You are asked to supply an additional payment method when the cash credit doesn't cover the complete cost of the purchase.
-
I have an Ipod touch. Since this morning I am not able to open any of my purchased apps. The screen briefly flashes but the apps don't start. Can anyone help?
- Try resetting the iPod. Nothing will be lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Then download/install new app.
- iOS: Troubleshooting applications purchased from the App Store -
How can i ge into the app store without using a credit card?
How do i get into the app store without using a credit card?
Unless you can find an item in the store that costs the same as your balance then you will need to contact iTunes Support and ask them if they can remove the balance : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
-
My iPad keeps shutting down the app I'm using and going back to the home screen
My iPad keeps shutting down the app I'm using and going back to the home screen.
Anyone know how to fix this?contact the developer of the app.
-
I changed my itunes password only and now I can't update any of the apps I downloaded using the old password. I tried signing in with the old password with no luck. Can someone help please?
Have you signed out of your iTunes account on the device/computer that you are using and signed back in with the updated password ? That should 'refresh' the account on it, and you should be able to use the account's new password to download updates to its apps
-
After the IOS 7.1 update I have issue with Game Center, I'm not been able to load the games. The apps don't seems to be able to connect to game centre. How to resolve the issue?
Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.
Maybe you are looking for
-
AR Invoice Presentation / Invoice Lines diff than Sales Order Lines
Hi, Due to business rules I got the following requirement, I'd like to get advice or second opinions please: Instead of showing 200 lines we want to show 1 line in the invoice summarizing the job done. The requirement is: The invoice should summarize
-
I presently have CS3 and would like to try CS4 before purchasing. I have Vista-64, 12G Ram, i7 PC. After initiating the download, it just sits with a message saying "adobe download starting"...that's it...no dowmload. Is there a switch or setting I'm
-
Error appears after rebooting the notebook after the screen with the logo thinkpad. On the keyboard buttons do not react. If turn off and then turn the laptop to boot will be successful. This error occurs if install any software on clean system (poss
-
Hello I just installed iLife`09, and was wondering if GarageBand now would import Cakewalk 9 files. I know that GB`07 couldn't, and there were no 3rd parties programs to do that either. Other thing that bugs me is that I couldn`t import a MIDI file t
-
UWL Item description in Portal
Hi folks Need your help My scenerio is Portal , showing workflows designed in MDM using MS Visio. At the moment, UWL work item is nothing but the step name in the Workflow, Can we modify it? Can we append the Material number to the Step description?