HT201514 The backup disk image "/Volumes/Time Capsule-1/Dullahan Mac mini.sparsebundle" is already in use.
My time capsule cant find its disk to back-up to..I have tryed everything.Need help.. Pinhead
Reboot the TC..
Read C12 and although different C17
http://pondini.org/TM/Troubleshooting.html
Similar Messages
-
The last date of my back up was 10/4- keeps saying The backup disk image "/backup disk image "/Volumes/time Capsule/ cheryl lynott's MacBook.sparsebundle" is already in use?
HELP -- what does this mean -- .......
Often, this error can be corrected by pulling the power on the Time Capsule, waiting a few minutes, and powering the Time Capsule back up.
See # C12 for more tips
http://pondini.org/TM/Troubleshooting.html -
The backup disk image “/Volumes/Data/David Witkowski’s Mac Pro.sparsebundle” is already in use. Whenever Time Machine starts to backup to Time Capsuel I get the previous error message Where can I find this disk image?. I need some help to fix this.
Thanks,
David WThere are multiple answers and solutions if you look just to the right under the heading of More Like This.
-
My time machine does not back up and giving me this error message: The backup disk image “/Volumes/Data-1/Amiel’s MacBook Pro.sparsebundle” is already in use. Pls help.
Make sure that there are no other Macs backing up at the present time.
Pull the power cord from the back of the Time Capsule
Count to ten
Plug the power cord back in
This will "fix" things about 98% of the time. Post back if you are in the unlucky 2% category. -
MacPro backed up to Time Machine, added Mac Mini now get "The backup disk image “/Volumes/Data/Jerry Booher’s MacBook Pro.sparsebundle” is already in use." error when Mac Pro tries to back up
It is standard Mountain Lion error due to the networking ability which is comparable to wet string. (actually that was lion.. it dried out some with Mountain Lion.. higher in the hills perhaps!!)
See C12 and C17
http://pondini.org/TM/Troubleshooting.html
But many people are suffering the same issue..
And the above is even a little out of date.. you might need to do a reset to the TC.
Welcome to Apple's beta program for everyone. -
I'm using the newest Time Capsule (2T) and I just got this error.
The backup disk image “/Volumes/Data-1/James Kranz’s iMac.sparsebundle” is already in use.
It has been running fine (so it think) since I got it a few months ago.This is your Time Machine backup image on your Time Capsule or other networked storage device that you are using for your backups. To clear this problem, try restarting your Mac, but if that does not work then restart your backup device. Doing these should clear the process that is usiing the bundle, and allow your Mac to properly attach it for use.
-
The backup disk image “/Volumes/Data/Bill Smith’s iMac 1.sparsebundle” is already in use.
Yes, standard ML error.. about 10 posts a day here.
Reboot the TC.. reboot the whole network in correct order if that doesn't work.. modem.. tc.. clients.
Read C12.
http://pondini.org/TM/Troubleshooting.html -
I noticed today that my last back-up was this a.m. and it has tried several times to back up since but I keep getting this message
Time Machine couldn’t complete the backup to “TimeCap”.
The backup disk image “/Volumes/Data/ MacBook Pro ."sparsebundle” is already in use.
I have never had this problem before and don't know what to do. I am not that great around computers so if anyone can help I would appreciate it. I did try to do some research but could not understand any of the content I read. I sure don't know what "sparsebundle" is and this is the first time I ever heard the term.
If anyone can help woold appreciate it.
I have Version 10.9.1This is a standard issue..
Been around since LION but you missed out.. !! Well the old rule applies.. there are three types of Mac users.
1. The bugs have bitten you, and you have done the work arounds.
2. The bugs are biting you and you are now trying to find out what is going on.
3. The bugs will bite you. And in the meantime you laugh at everyone with problems and say it must be all their fault. Doesn't happen to my system.
You were simply in the last group.. now, with the wonders of mavericks to help, you got bit.
The solution is simple.. unplug the power cord from the TC .. count to 10.. power up the TC again.
No luck look at the more technical help.
C12 here. http://pondini.org/TM/Troubleshooting.html
Your naming might also be an issue if this continues to happen.. see C9. -
This message keeps appearing and my time machine is not backing up. What is the reason and how can I fix this?
Maybe this will shed some light on the problem: The Backup disk image ... sparsebundle ... is already in use.
OT -
I got the error message that my Time Capsule "iMac.sparsebundle could not be accessed (error - 1). It backed up fine yesterday. Anyone else have this problem?
If it helps I am getting the same message, I have reported it to Apple and they have someone working on it. Mine stopped backing up after having a new hard drive installed. I can however back up to the same time capsule from my laptop.
-
Hello, I get the above message when trying to back up to time machine. It worked previously. I have done the usual things (switch off & on etc). Any ideas?
Thanks!What router are you using? I got the same problem on and off when I was using a number of brands of WiFi routers. Until one day, I heard that non-Apple routers don't support Bonjour and it makes TM backup unstable. I tried using an Airport router (Express, Extreme and Time Capsule), the backup became stable, in long term.
Is it the solution to your problem? Give me feedback. -
The backup disk image “/Volumes/Time Capsule Disk/Earl Burroughs’s MacBook Pro.sparsebundle” is already in use. This is the message I get when it tries to back up, it had been working fine prior to this.....
The Backup disk image ... sparsebundle ... is already in use.
-
When trying to use my time machine got an error message "Time Machine could not complete the backup.
The backup disk image “/Volumes/ Time Capsul/ MacBook Pro.sparsebundle” could not be accessed (error -1).
Any ideas?I have not found a long-term solution (fix), but in my case the volume where the Time Machine backup should occur usually is mounted on the desktop but not as a shared volume (incidated as a drive with the people holding hands superimposed over the drive icon). If I drag the drive to the trash (unmount it), the next time Time Machine is scheduled to run, it completes successfully.
-
I keep getting this message: The backup disk image “/Volumes/Time Capsule/Coyner’s iMac.sparsebundle” is already in use. What should I do?
SeoulTom (Coyner)Make sure that no other Macs are backing up at the time
Pull the power cord from the back of the Time Capsule
Count to ten
Plug the power cord back into the Time Capsule
Wait a few minutes, then try a backup again
Check to make sure that you are running firmware 7.6.4 on the Time Capsule -
I keep receiving this message.
Time Machine could not complete the backup.
The backup disk image "/Volumes/Time Capsule/Karla Laura Smith's MacBookPro.sparsebundle" could not be accessed (error -1).
Can anyone help me clear this annoying message up? Thanks for advance....The unplugging was of power, if you were unplugging ethernet .. that will not do anything.
The issue is explained here.
C17 http://pondini.org/TM/Troubleshooting.html
If a restart of the TC is not adequate you maybe in the 2% that has other issues.. please try a full network restart in correct order.. with everything off.. modem.. then TC.. then clients.. with 2min gap to allow modem and TC to finish boot process.
Maybe you are looking for
-
PSE5 organizer-like timeline display/search option in Bridge?
I'm a former PS elements organizer (PSE5) user who recently was forced into using Bridge once we upgraded new comps & bought CS4. I still am having trouble getting my keywords to work correctly in Bridge after I migrated all the pix - but that's not
-
First big iMac problem. Help very much appreciated.
Hi folks, I've just come onto these forums today, for the first time, largely prompted by a major iMac problem i've encountered over the last couple of days. Please excuse me if any answers to my problem have previously been posted, but i'm typing on
-
IPhone 5 Hold Button Not Working Right Side
Hey guys, my iPhone 5's hold button is non responsive on the middle and right side when I push it in. When I push it in on the left edge of the button it works but otherwise it doesn't. My question is, if I take this into the Apple store, can I get i
-
down graded from ios 7 to ios 6.1.4
-
Hello All, We need to migrate an application developed in oracle Forms to J2EE migration using Oracle-ADF. Major functionalities developed using Oracle forms and Java Swing. We need some input regarding 1)Pro and cons of Jheadstart as a migration too