HT201516 can iphoto just disappear? Why does my computer show no photos?

I Was trying to look at photos and iPhoto had just disappeared from my computer and seemingly so had my 30,0000 photos stored on my external hardrive.  I am running MacKeeper and seem to have started to recover them.  I tried to download iPhoto again and it said It couldn't run on less than OSX 10.10 whereas I have 10.9.5.  When I have recovered my pictures I will update the OS.  Can I update it now while the recovery is happening? And can I download iPhoto while recovering the photos?  Has anyone experience of this?

The first thing to do is get rid of MacKeeper.
MacKeeper – Do Not Install
MacKeeper – Do Not Install (2)        See  SDW2001’s post
MacKeeper Removal
MacKeeper Removal
Is the iPhoto application in your Applications folder and does it open? If not, do you have a backup you can restore the application from? iLife disks?
iPhoto 9.3
Can you see the iPhoto Library on the external drive?  How are you recovering the photos?
Before upgrading, I suggest you try to get iPhoto straightened out.

Similar Messages

  • Why does camera roll show last photo taken even though it was trashed ?

    Why does camera roll show last photo taken even though it was sent to trash ?

    http://support.apple.com/kb/HT4486

  • Why does my iTunes show more photos than I really do on my device?

    I only have 493 photos on my device but my iTunes shows that I have 644 and a lot of memory is used because of that? Any reason why this happens and how I might be able to delete the extra photos?

    Try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose any data by resetting, but it can cure some glitches.
    If this does not help, setting it up as new device would be the next step:
    How to erase your iOS device and then set it up as a new device or restore it from backups

  • Why does my iPhone show some photos full size and some scaled?

    Hi,
    I have got a collection of DVDs and syncronized a folder with all cover pictures to my iPhone 5.
    When looking at them with the "photo" app, some covers are shown full-size, some are
    shown scaled. The scaled ones are shown at maximum height, so that I don't see the
    whole cover on the 16:9 screen.
    All covers are JPG having a similar size (760x1080px), with no EXIF/IPTC tags and
    different dpi (tried different settings but saw no change).
    Does anyone know, how the iPhone decides to show pictures scaled or not?
    Thanks for a hint, regards
    Christian
    "full" vs. "scaled"

    Text messages are green and iMessages are blue. iMessages can only be sent between Apple devices.

  • Why does the "Computer Name" sometimes change?

                    Not a big deal, just curious, why does the "computer name" sometimes change?
                     The name will be the same, but it will add a number....2,3,4...I always change it back so it doesn't have a numeric value next to it, but just wondering why it happens.
                                            Thanks.

    Can also occur after your computer is put to sleep and then wakes back up or after your computer is force quit and immediately restarted. Sometimes the router 'believes' the computer is still connected when it actually isn't. When that computer re-establishes a connection the router 'tells' the computer that a computer with that name already exists so it has to change its name. By default a computer running MacOS adds a number (or increments its number) when this happens.

  • RENAME:  When I rename a photo why can I not find it doing a search?  The photo obviously keeps its old name even though it has a new one   IPhoto 09

    When I rename a photo why can I not find it doing a search?  The photo obviously keeps its old name even though it has a new one>  IPhoto 09

    Thanks, that makes sense.  If I do a search in IPhoto I find it.  I have 6 grand children and also have had my camera for quite awhile and it starts file names over again after 10,000 pictures. (I don't have all these on the computer) but now I have some files with the same name  ie  img_4   and img_4
    Thanks again for your help!!
    HC

  • When i go into finder   click on pictures why dose it not show all photos just lets me open iphoto

    when i go into finder   click on pictures why dose it not show all photos just lets me open iphoto 

    Ralph9430 offers a good suggestion.  But you may need to do this before taking his advice:
    Check in iPhoto's Preferences (which you can open from the iPhoto menu).  Look in General, and make sure "Connecting Camera Opens" is set to "Image Capture").
    If it is set to "iPhoto", you won't be able to get to Image Capture easily.

  • Why does my computer play strange music at random times and how can I stop it?

    why does my computer play strange music at random times and how can I stop it?  The music isn't anything on my machine and the only way I can switch it off is to reboot.  Can anyone advise me please.  It's driving me nuts ... I don't even like the music it's playing!

    What apps are open and are you really still only on 10.5.1??????? At the very least please update your profile, also please remember to post more information. I suspect it's something going on with just your user account. You can verify that by creating another user account (call it TEST ACCOUNT) and log into that account and test. Once this has been verified then you will need to check which apps are running to determine what is causing your issue.

  • Why does not ipad show on itunes? when i connected with my macbook using usb, just it is charging electricity.

    why does not ipad show on itunes? when i connected with my macbook using usb, just it is charging electricity.
    i don't know why...

    Sometimes it can be something very simple and easy to fix. Before you get into any involved troubleshooting, quit iTunes, restart your Mac, restart your iPad and then try to sync again.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    If this doesn't work, then try the more involved stuff.

  • I have a DVD I recorded from my tv.  I am trying to make copies and when I insert the DVD I get a message saying it is blank even though it is not.  My question are: Why does my computer think it's blank? And how can I copy a DVD?

    I have a DVD I recorded from my tv.  I am trying to make copies and when I insert the DVD, I get a message saying the DVD is blank, which it is not.  My questions are: Why does my computer think it's blank?  And how can I copy the DVD providing my computer recognizes there is content on it?
    Thanks, Sheila

    TV video typically is copyrighted content.  We'd be breaking several rules trying to help you.  Good luck!

  • Why does my library show no content even though ATV2 can see my library?

    Why does my library show no content even though ATV2 can see my library?

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • Put movies in itunes on one computer why does it not show up when i access itunes from other computers or ipad2?

    put movies in itunes on one computer why does it not show up when i access itunes from other computers or ipad2?

    i just purchased a file that had videos in it. i put them in the itunes library on my pc where i first downloaded them. i was able to transfer them to my other pc, a laptop, through my home network. i am now trying to get them on my mac pro desktop and my ipad2. my mac pro can see the other computers on my home network but i cannot get it to connect to them. i know the operating systems are different but was hoping i could transfer pictures and files from pc to mac this way. haven't been able to get it to work yet. the videos i am trying to get my mac to see came in a folder with both mac and pc versions. i thought if i got the videos i purchased into itunes that i would then be able to get them to my mac pro and my ipad2. i am new to mac/apple and have always been pc-centric so trying to marry it all has been difficult. i speak pc pretty well but am just learning apple. am i trying to do things that are not possible? i sure could use a knowledgable friendly soul to walk me through my issues of having pc and mac on the same network. i have been able to get all computers and ipad to print on my network. thanks.

  • Why does iWeb upoad the original photo in addition to the blog photos size

    Hi,
    why does iWeb upoad the original photo in addition to the blog photos size?
    It's a waist of webspace.
    JO

    Seems a bit strange having to pre-prepare an image to be manipulated by a website program that can manipulate images.
    1 example, I loaded a photobooth image into Iweb (30-40k) only to find it changed it to over 240k just so it can add rounded edges..
    I would like to be able to drag over a few 1meg+ images and have Iweb just use the size it needs without keeping over 13megs of images that arent used.
    but it doesnt seem to do it for all images, only the 1st one of the page (like in the blog pages) 1 image is there by default, I load in say 6 images, 5 have square borders 1 has a round one and only that one had its original big brother uploaded..
    Thanks for the info, at least now i can stop looking for a menu option that isnt there

  • Why does my iPhone shows "restricted" on other people's phone when I call them?

    Why does my iPhone shows "restricted" on other people's phone when I call them?

    Lena the only previous e-mail message was on Tuesday Dec 30 which stated…..
    Lets get your Caller ID to work as it should! I will send you a private message so that we can better assist.
    This e-mail states  that another ‘private message’ presumably via e-mail would be sent/received but I haven’t received anything else from an e-mail perspective. Presumably it is just a matter of navigating through a low number of settings to get to the caller-id option.
    Thank you,
    Steve.
    Sent from Windows Mail

  • HT1245 Why does my caller I.D. photos show as a small thumbnail in the upper right corner and not full screen? I have used both photos I have synced and photos I have taken, yet others have full screen photo I.D.'s.

    Why does my caller I.D. photos show as a small thumbnail in the upper right corner and not full screen? I have used both photos I have synced and photos I have taken, yet others have full screen photo I.D.'s. I have looked onlime at several threads and there are no real answers as to what I need to do or am doing wrong.

    I am also having this issue.
    I've just spoken to someone in the Apple Support Centre who advised me that since the product is in beta, he is unable to assist. I wanted to find out whether someone was able to delete the data for me, or 'reset' the photos app somehow. This apparently cannot be done. He suggested I provide feedback via the feedback page, which I will do, but to be honest doesn't fill me with a lot of confidence in the issue being fixed.
    I also deactivated the service and waited the 30 days for the pictures to be deleted - this should have been completed in mid-January. Instead, my iCloud.com Photos page is now showing the photos that should have been deleted as grey squares, just as you described. I am also unable to delete these photos; every time I try, I get the same message about a server error.
    I am also unable to disable the service by enabling and then disabling it on my iPhone. Each time I have tried this it hangs on uploading for several hours, with the progress bar not moving at all. When I disable it on my iPhone, the web app remains unchanged.
    If anyone has had this issue and has managed to fix it, PLEASE share your wisdom. I am out of patience!

Maybe you are looking for

  • Accept user input in sql *plus 9.2.0.1.0

    Any body budy can get any idea about my sourcr code? I wrote below code in sql *plus accept p_hire_date1 date FORMAT 'DD-MON-YYYY' prompt 'ENTER hire date from:' accept p_hire_date2 date FORMAT 'DD-MON-YYYY' prompt 'ENTER hire date to:' DECLARE v_hd1

  • Can't install DPS tools for CS6

    trying a couple options - can't seem to install from the indesign (UPDATES) selection under Help - as it's grey'd out downloaded (AdobeDigitalPublishingPatch-CS6-29.0.0.dmg) - getting this error "Update Failed - Please contact your Administrator if y

  • Web Services - Servlets vs EJBs

    Hi, Looking for any suggestions about the benefits of using either servlets or EJBs as web service endpoints. Very early in the design of any application, I wish to expose my business logic components as web services, is there any particular benefit

  • Solman_setup error: Text NL9 Not Found

    Hello Experts, I perform a fresh solution manager installation, and applied SPS20 and finally SPS23 Then when try to run SOLMAN_SETUP a dump is raised with the following information: The following error text was processed in the system SLM : Text NL9

  • UTF8 -character encoding

    I have a problem showing other characters encoding besides english. i am using OLITE_10.3.0.2.0 and the repository in on a oracle 11g db. the oracle 11g is configures to utf8 encoding during its installation and i can see the characters correctly of