HT201612 I was trying to install windows using boot amp but now I can't boot my MaOckbook pro again
I was trying to install windows using boot amp but now I can't boot my MacBook pro again
Go to the Windows Control Panel and select Boot Camp applet. In that applet there is a Boot Drive option. Select Mac OS X.
Or restart the system and hold down the Option key for a few second. A Boot Menu screen will come up. Select Macintosh HD.
Once in OS X go to the Sys Prefences, Startup Disk and select Macintosh HD Mt Lion 10.8.2 and click Restart then Restart again. the system will now restart in Mac OS X.
To boot back to Windows do the same, Startup Disk, and select Windows then Restart and Restart again.
Similar Messages
-
Was trying to install windows 8.1 but didn't install bootcamp first. Am in a loop. Keep coming back to the windows setup page. What to do?
Please reset NVRAM - Startup key combinations for Intel-based Macs - Apple Support and OS X Mavericks: Reset your computer’s PRAM. You have Bootcamp settings in the nvram that are causing problems.
-
What is the best Partition size for a windows 7 Home Premium. I'm trying to install Windows using Boot camp
Go into your system preferences and click the startup disk icon then select your Mac HD.
-
I'm trying to install windows 8 on mac, but after partitioning and restarting, it stucks on blue logo and i waited 20 minutes but nothing happened, what can i do, please help.
I think there's some remmants left over from when Apple transferred stuff over. We can try a quick fix, but if that doesn't work, I think the only option is to clean install OSX and then install Windows.
open disk utility, confirm that you only have 1 partition (mac journaled)
restart and PRAM reset
open disk utility and repair permissions twice
restart boot camp assistant
Does it work?
If not, I would boot holding command+R, choose disk utility from the menu and completely erase your HD (formatting it as mac journaled again). Then, install OSX on this HD. Once OSX is installed, don't copy your files over from the backup yet. Instead, start boot camp assistant and see if you can get Windows installed. You can copy back your other files after we get Windows installed. -
Installed Windows 7 on my IMac, now I can't get Apple OS to work
Installed Windows 7 on my IMac, now I can't get Apple OS to work, I have tried booting with Snow Leopard disc in and nothing works. I had trouble from the start but now nothing works except Windows 7, sound wont work etc. etc.
I originally tried installing Widows 7 so I could run my Flight Simulator X on the IMac I got from my daughter and I used BootCamp and had partitioned it at about 4GB for windows and the first thing I got was I had to put a bootable disc in and neither the windows 7 or Snow Leopard would work. Then I got Windows 7 to work but I can't get Snow Leopard to run, when I put the disc in it says that it not supported. Of course windows wont show me anyother areas of the disc that I could try to get to, the other side of the partition I guess. I have tried holding the C key down on reboot and that doesn't work. I hope this gives you a little more insight as to what is going on. Thanks Bill
-
Installed Windows 7 on bootcamp but now my wireless mouse won't work when in windows. What can I do?
Installed Windows 7 on bootcamp but now my wireless mouse won't work when in windows. What can I do?
assuming it is an optical mouse (no ball etc.) then there aren't any moving parts involve in the motion detection
so there's a faulty component or connection
from what you describe it could be just a loose/broken connection, so if you know someone familiar with electronics see if they can open it up and have a look -
I have purchased iPhone 3g device from my friend, I connected it to the iTunes to upgrade from 3.1 to 6.0 as many softwares were not being installed as iOS was not up to date. I upgraded but now I can not activate my device. What I should do now??? i am really feeling difficulty because i have been disconnected from the network.
I am from Pakistan.The 3G cannot be updated to iOS6, it can only go to iOS 4.2.1.
Activation issues are generally the result of the device being hacked or jailbroken. -
Hi, recently I downloaded a picture downloading app because I was trying to upload a video on instagram but now my iPhoto won't work, it says another app is running, I have already deleted the app on my phone but how do i uninstall it on my macbook?
Open Activity Monitor by searching it in spotlight.
Go to the app that you downloaded & quit it. If it won't quit then Force Quit. -
Can nowaday we can use playnsound or send message on find my iphone ? I use it before but now I can't find the bottom.. So i want to ask that did it still have or can use? If yes how to use ?
Yes. See http://help.apple.com/icloud/#mmfc0f19b5.
-
My mbp 15 retina doesn't start up, i tried to install Windows using bootcamp but it didn't work well
I tried to install windows 7 using bootcamp, i did every steps, when the installation of the windows started i selected the partition created by bootcamp but it didn't install because it said that maybe something was corrupted, then i quit the installation but now my mac doesn't start up, the screen gets black and it says: no bootable device -- insert boot disk and press any key.
I try to press alt/option when it starts but nothing occurs. I don't know what is going on, i really need to use it urgently, i hope i won't loose my data. Well i hope someone could help me!!Do not install MacKeeper:
https://discussions.apple.com/docs/DOC-3026
(Please note that references to the original developers, Zeobit, should now refer to Kromtech Alliance Corp, who acquired MacKeeper and PCKeeper from ZeoBit LLC in early 2013. -
I was trying to install windows, it didn't work. Now my mac won't start. Please help!
I Was installing windows through Bootcamp. There was an error that said that recovered partition should be NtFS type. Now it quit installation and shows me am error message saying, "No bootable device -- insert boot disk and press any key". How do I go back to my Macintosh from this? :/
ps my windows ISO image is on a flash drive.Hello AasemJS,
Thanks for using Apple Support Communities.
To boot to your OS X partition please follow the steps in the article below.
Startup Manager: How to select a startup volume
http://support.apple.com/kb/HT1310
Take care,
Alex H. -
I received a notice to download a newer version of itunes. After starting the process of downloading I got an error message which then suggested I try to download itunes again. When I did this it showed the file was already in my system and stopped the download process. Now I can't open my itunes to play my music. What can I do to get it back?
The best discussion of resolving the issues is found in the user tip: https://discussions.apple.com/docs/DOC-6562
-
X86 install was successful, but now I can't boot from the hard drive
I have successfully installed Solaris 10 for x86 from the bootable CD ROMs. However, now, after removing the CD-ROM from the drive and booting from the hard disk I am having problems.
The system attempts to boot. It displays the Solaris Primary Boot Subsytem v2.0 screen...pauses for 15 seconds...then reboots itself. And it continues this process.
However, if I boot to CD-ROM first, then boot to the Hard Drive, I have no problems. The CDE comes up fine.
We are running a 64 bit OS with a SATA drive that is supported. And as I mentioned, the install successfully completed.
Any thoughts are greatly appreciated.is your hard drive connected as IDE0 - primary master? if not try doing so.
-
What do u think that i need to do stay with windows, if its your answer, tell me how to make the wireless work
If your anwers is install mac again tell me how can i install it again i dont have the installation disk
Help Me PlzGo to the Windows Control Panel and select Boot Camp applet. In that applet there is a Boot Drive option. Select Mac OS X.
Or restart the system and hold down the Option key for a few second. A Boot Menu screen will come up. Select Macintosh HD.
Once in OS X go to the Sys Prefences, Startup Disk and select Macintosh HD Mt Lion 10.8.2 and click Restart then Restart again. the system will now restart in Mac OS X.
To boot back to Windows do the same, Startup Disk, and select Windows then Restart and Restart again. -
i dont want to have to purchase and imatch account, is there a nother way of accessing my icloud music?
Purchases you have made from the iTunes Store should in most cases be in the Cloud (unless the rights owner has had it removed or you are in a country which does not permit this). Other music such as CDs you have ripped are only there if you subscribe to iTunes Match.
Downloading (using iOS or computer) past purchases from the App Store, iBookstore, and iTunes Store - http://support.apple.com/kb/ht2519 - enabled with iTunes 10.3 and newer; not all media formats are available in all countries (see: iTunes in the Cloud, iTunes Match, and iTunes Radio availability by country - http://support.apple.com/kb/HT5085); apps, books (not audiobooks), music, t.v. shows, and movies (some - not all studios have permitted this). Downloading previously purchased movies and TV shows requires iTunes 10.6 or later. Discontinued items not available. For items not included in the iCloud list (e.g., ringtones, audiobooks), or locations or computer systems where iCloud is not (yet?) available, you only get one download per fee paid. Apple recommends, "You always back up your iTunes library in the event that a purchased item is no longer available on the iTunes Store," (http://support.apple.com/kb/ht2519).
Maybe you are looking for
-
Can my boyfriend have a different account on the same ipad
How can me and my boyfriend use but have our own separate accounts on the same ipad ?
-
How to open a .doc file in MS word?
Hello Can any body direct me to any api or library or sample, where by if you have word document in your local machine, you can run a java program to open that file in MS word. Basically Microsoft word is opened with the local file in your machine an
-
Displaying leading zeros in ALV
Hi experts, I have a field of length 12 char. I want to display the field in grid. My requirement is if the field is below 6 char(such as 101) i want to display as 000101 .I added logic for adding zeros up to six char but the leading zeros are supr
-
How do you link an image within a Mail signature to a website?
I do link words to a website, but I can't find how to link images in Mail signatures to websites. Could anyone help? THX!
-
HT4199 Having trouble connecting to internet w/iphone 4 through xfinity Arris TG-862 wireless gw
Tried changing to channel 11, and resetting security to WPA2 AES. No joy. I can get to the router using the phone, but not to the internet. Please help.