HT201612 magic mouse boot camp drivers for Lion?

Where can I locate magic mouse drivers for Win 7 running in Boot Camp on an iMac running Lion?

The hatter wrote:
Recent thread post with fix for BT:
bluetooth connection is incredibly unreliable/intermittent when in Windows (I run Windows 7 64-bit and Boot Camp 4.0, and got both devices connected without any trouble via Bluetooth).
https://discussions.apple.com/thread/4079148
After much testing, I have found the cause of lagging/jumpiness on the Bluetooth Magic Mouse and Magic TrackPad in Boot Camp. Hopefully this will help others:
The drivers for the Broadcom 802.11n Wireless Adapter have a setting called "Bluetooth Collaboration" that is Disabled by default. Enabling this option removes the problem instantly. My Magic Trackpad now works flawlessly, even if I stand 6 metres from the machine. It now works just as well as under Mac OS. The setting can be found under:
Control Panel > Device Manager > Network Adapters > Broadcom 802.11n Network Adapter (right click and choose "Properties". Under the "Advanced" tab, highlight the setting named "Bluetooth Collaboration", then change it to Enable. Then click OK.
I narrowed the problem down to the wireless card by disabling ALL startup services and processes for Windows, then re-enabling one by one. As soon as I enabled the Windows Wireless Service, the problem came back. Similarly, disabling the Wireless Card inside the Network and Sharing Center (or Device Manager) removes the problem. This led me to believe it must be a driver issue with the wireless card, since the problem didn't occur with the Magic TrackPad under Mac OS, or on my mother's Windows 7 64-bit computer. So when I went into the Driver Properties to check for an update, I found this setting about Bluetooth Collaboration.
All Apple notebooks use the Broadcom card (and have done for years), so this driver is installed for almost anybody using Boot Camp on an Apple notebook. I'd assume this problem would affect anybody using Boot Camp + wifi + a Bluetooth device.
This works.  Unfortunately it has one bad side effect: it will slow your wifi connection down to a crawl. For example: Windows 7 speed test (rMBP, Win7, boot camp, linksys WRT45G router set to g only) with collaboration disabled: up = 17 Mbps, down = 6 Mbps; with collaboration enabled: up = 3 mb/s; down = 5 Mbps.  For me, this was not acceptable, so I kept collaboration disabled.

Similar Messages

  • I'v got the latest macbook pro 13" and it dose not come with the lion os disk so how do i get the boot camp drivers for windows 7 without an os disk

    i'v got the latest macbook pro 13" and it dose not come with the lion os disk so how do i get the boot camp drivers for windows 7 without an os disk

    Page 5, step 2, #2, 2nd bullet.
    http://manuals.info.apple.com/en/Boot_Camp_Install-Setup_10.7.pdf

  • Boot Camp drivers for windows (download)

    I am trying to instal windows 7 on my MacBook Pro thru Boot Camp. Does anyone know where I can download the Boot Camp drivers for windows. I can't find them on the apple website and I don't have my Mac OS X instal DVD with me.
    Thank you

    Nick Px360 wrote:
    Are they essential or can I run windows 7 on my Macbook Pro without the bootcamp drives
    Only if you don't mind a Windows system lacking most features and thus beaing nearly unuseable.
    Applying the appropriate drivers for hardware support is a must for all operating systems.
    Stefan

  • Unable to install Boot Camp Drivers for Windows

    Mac Pro (2) 3.2 Xeon quads
    Mac OS 10.5.2
    Boot Camp side - Windows XP pro x64 w/SP2
    Step 3 listed in the instructions for setting up Boot Camp is to Install the Boot Camp drivers for Windows. At this point Windows recognizes my Mac Install disk 1. I get the following message: "the installer encountered errors before Boot Camp could be configured. To retry these operations at a later time, please run the installer again." I am not sure if I needed to do something to install the Service Pack 2? My firmware is at MP31.006C.B02 and 1.25f4. When I checked for the latest firmware, it returned a message that it was not necessary.
    Maybe the XP pro x64 is not compatible?
    Barry in St. Louis

    I did install windows xp sp2 32 bit on my macbook pro 2.2 GB and I'm getting the same ...
    When trying to install boot camp drivers, a message came up saying:
    Boot Camp requires that your computer is running Windows XP Service Pack 2 or Windows Vista.
    The only option it gave me was to click the "OK" button. When I clicked OK , another message came up saying:
    Boot Camp Installer completed. The install encountered errors before Boot Camp could be configured. To retry these operations at a later time, please run the installer again. Click "finish" to exit installer. I am running a brand new full retail version of windows xp service pack 2. Applecare will not help blaming Microsoft and of course Microsoft is blaming Apple. What a bunch of useless crap!! Can anyone help??

  • Boot camp drivers for Windows XP

    Where do I get the Boot Camp Drivers for Windows XP after installing Windows XP again

    Regarding my query, the following are attached:
    1. Proof of Purchase (Bill dated 26/12/2008)
    2. The Serial Number as noted from the Mac screen is as follows:
    Serial Number (system): YM******ZE4
    Hardware UUID: ****
    <Edited By Host>

  • Cannot get Boot Camp drivers (for Windows XP) installed

    I've partitioned my Time Machine HD for the 32GB/FAT format of Windows XP/Home Edition w/SP2. The installation of Windows proceeded OK. However, after installing Windows, ejecting the W-Install disc, and inserting my MAC OS X Leopard disc, the "setup.exe" file does not open. If I start up in Windows, I cannot open the Opt. Disc drawer since the BC drivers are not installed; if I insert the OS X disc in the drawer, then restart in Windows, the "setup.exe." file does not open.
    Where do I go from here to install the Boot Camp drivers for Windows? These drivers are needed for 'normal' Windows operation, and are required in order to install the Boot Camp update. Any suggestions would be appreciated.

    Hi David,
    while you are in Windows and have the Leopard DVD inserted, can you access the content of it using the Windows Explorer ?
    or maybe this hint on MacOSXHints can help you access the Windows Content of your Leopard DVD while in OSX http://www.macosxhints.com/article.php?story=20080708145453136
    If so, you can try to copy the Windows Content onto a USB Memory Stick and use it to install the drivers.
    Good Luck
    Stefan

  • Installed Boot Camp drivers for Windows 7, now black screen!

    I have a question--I have a late 2009 iMac with the ATI card, followed Apple's procedure for avoiding the black screen while installing Windows 7 on the partitioned HD, and found I could not update to Boot Camp 3.1 without already having Boot Camp 3.0 from the 10.6 install disc. I inserted the disc, had to perform a workaround because it said I couldn't run 64-bit, and installed the drivers (I assume?) from Boot Camp on the 10.6 disc. When my iMac restarted the screen soon goes black. I guessed I was at the login screen, typed in my name and password, and could hear it logging into Windows--my sound works, Magic Mouse works (no scrolling), etc but no screen after booting up in Windows. Did the Boot Camp drivers from the install disc over-write something that was working? How do I fix this so I can proceed to install the 3.1 and 3.2 Boot Camp updates? Just the ATI* trick? Please help!!!

    I'm sorry to take up your time guys - as I wrote earlier I'm not that technical and new to all of this - I was promised that I could do everything the mac way in the windows environment if I bought Parallels Desktop 7 - I only did this as my company is installing af new CRM system that is only supported in Windows - now I have installed everything and find out that the MAC keyboard shortcuts and layout is not working at all in i.e. Outlook etc. and I've totally forgotten how the Windows shortcuts etc. is working - Parallels asked me to go to Apple for help and here I am
    You write that "if you believe it's correct do it" - but I don't believe anything else than what I'm told - I'm not going to install anything if I don't know how to do and whether it's correct - I wont have the nerve to do that.
    If at least could get a list or someting on how to use my Magic Trackpad in the windows environment I would be happy - then I would just have to switch between how to use it on both sides.
    Hope you understand and sorry again for taking up your valuable time

  • Early 2008 Mac Pro - Can't load Boot Camp drivers for Win 7 64

    Trying to install Win 7 64 bit on my early 2008 Mac Pro.  I downloaded the Boot Camp drivers 4.0.4033 and installed them on a USB drive but, for some reason, when I try the install them during the process, I get a message that my hardware is not recognized.  Skipping the driver loading process, I am able to install Win 7 but when the system trys to restart to continue the install, I get a message "disk error, press any key to restart".  Pressing any key does not get me anywhere.  I went through the Win 7 repair process and again tried to load the drivers with no luck. 
    Any thoughts would be appreciated.
    Thank you,

    That article was also my starting point and I have followed those steps again and again and again. I haven't slept, I haven't done anything other then try to make it work for more hours than I can count. I came here for help because that solution is not working for me.
    The region and keyboard type settings simply don't have the Apple keyboard layout listed. As I said, someone on the Fusion forum tried to follow the article's instructions too and he managed to get it working because he COULD run setup.exe (Boot Camp Drivers) on his machine, and I CAN'T. Yes, it is all explained in that article... but the drivers WON'T INSTALL, I get an error message saying "This version of Boot Camp is not intended for this computer model".
    First you said it wasn't physically possible for me to install the drivers, then you said I should just follow the article. Well, the article clearly says "Install the Boot Camp Windows device drivers in the virtual machine" which you just said couldn't be done! I want to cry. I should have just bought a second laptop, this is too painful.

  • Boot camp drivers for windows 8

    Every thing works well on windows 8 install using boot camp. Even all drivers available for windows 7 work and let windows 8 function all the way. I only got struck on track pad as this is only important thing which gave away and never worked. On using wireless mouse or USB mouse one can have alternative to track pad. Fail to understand why Apple is making an issue by not releasing drivers for its crack pad which enable the machine to work in windows mode. Every time one use windows curses apple for this intentional blockage. May be Apple devices a way that people must remember them once any one uses boot camp. If Apple is so hostile to Microsoft why allow even boot camp?

    Ramesh Mehta wrote:
    Every thing works well on windows 8 install using boot camp. Even all drivers available for windows 7 work and let windows 8 function all the way.
    Really?
    I only got struck on track pad as this is only important thing which gave away and never worked.
    OK, everything did not work "all the way" then.

  • Boot Camp Drivers for Windows  7

    Hello...
    I just installed win7 on my Mac Mini with Boot Camp Assistant, but after installing and making the setup, I was not able to install the drivers from my SL DVD. Windows 7 can't read the disc and I cannot find the program to install my drivers even if I tried to look in the contents of my DVD in win7.
    I actually don't know, if I should drag in my install DVD that came with my Mini, because when I bought it, the "Tiger" was released and I have only the SL install disc 1 "burned" from my friend.
    I would really appreciate if somebody would help me.
    Thanks

    I'm sorry to take up your time guys - as I wrote earlier I'm not that technical and new to all of this - I was promised that I could do everything the mac way in the windows environment if I bought Parallels Desktop 7 - I only did this as my company is installing af new CRM system that is only supported in Windows - now I have installed everything and find out that the MAC keyboard shortcuts and layout is not working at all in i.e. Outlook etc. and I've totally forgotten how the Windows shortcuts etc. is working - Parallels asked me to go to Apple for help and here I am
    You write that "if you believe it's correct do it" - but I don't believe anything else than what I'm told - I'm not going to install anything if I don't know how to do and whether it's correct - I wont have the nerve to do that.
    If at least could get a list or someting on how to use my Magic Trackpad in the windows environment I would be happy - then I would just have to switch between how to use it on both sides.
    Hope you understand and sorry again for taking up your valuable time

  • HT4407 No boot camp drivers for 64-bit Windows 7 installed

    Dear Family,
    I'm unable to download the Window Support on the boot camp assistant.
    I installed the 64-bit version of Windows 7 on my 15" Mac of 2010 model running on Lion n the Windows have no wifi so i guess the drivers are needed.
    Returning back to Boot camp assistant to download the latest support from Windows but
    It keep prompting:
    "Can't install Windows Support Software because you are not connected to the Internet."
    When my wifi is on and even if i'm on ethernet.
    Is there anywhere i can directly download the bootcam, i suppose its 4.0 or 4.1
    cant find any link.
    Need you folks to help me out.
    Without the Windows, i cant have my access and my assignment requires Access. N even the Business edition of MS Office Mac 2011 aint hv got Access.
    Thanks so much!
    Kryz

    Obviously you are and can connect to the net.
    The error message and problem is quite well 'documented' by other threads and the fault lies with Boot Camp Assistant's configuration.
    Try turning off auto proxy in OS X network control panel and play around wtih that.

  • How can I download the boot camp drivers for windows 7 64-bits?

    I have a macbook pro Retina (no disk tray) purchased in mids 2012. I have no internet access on my macbook since my wifi is a cablemodem one.
    And the whole problem is that I've recently installed a copy of windows 7 64bits using BOOT CAMP and I can't reboot my PC to access my MAC OS X disk!!
    Please, help!!!!!!!!

    Did you try booting while holding down the Option key?

  • Can install Windows 7 Pro, but not Boot Camp drivers

    I have used Boot Camp assistant to install Windows 7 Pro (64 bit), and built the USB drive with Boot Camp drivers.
    Installed on a separate drive on my Mac Pro.
    When I install the drivers and reboot, I get an error. Basically Windows says there is an error and it needs to run System Restore in order to roll back to the previous status (ie. remove Boot Camp drivers).
    I am using the latest Boot Camp drivers for a Mac Pro (4,1) and 64 bit Windows.
    I tried downloading the drivers from Apple's website in Windows, unzipped and installed - same issue.
    Windows is not yet registered.... (might that be an issue?)
    Grateful for some ideas. I have previously had Win7 running on this machine, and even Win 8 (which crashed - necessitating a roll back to Win 7 whcih is nicer).
    TIA

    the drivers have a root setup.exe if people have problems with that they can manually navigate to the sub dirs and run the driver installs for the various hardware manually
    the various driver exe install will only install if they detect the hardware is there so it's safe to run installers for say a video card ones computer does not have
    and if one of the driver don't work of the hardware related to it is defect in some way you can identify which one as the restore would happen right over that driver install
    that windows is not registered should not play apart as far as I know

  • Best Boot Camp version for my MacBook Pro?

    Hi guys!
    So, I've got a 17" MacBook Pro from 2007. It's listed as "macbookpro2,1" in System Profiler, if that helps. I've got the Windows 7 Release Candidate installed on a Boot Camp partition running BC version 2.0. I guess I'm a bit confused - what is the "correct" version of the Boot Camp drivers for this machine?
    I bought Star Trek Online today, and I just want to make sure I'm getting the best performance this trusty old Mac is capable of!
    Thanks,
    Huxley

    Hi Huxley,
    Windows 7 BootCamp Driver support requires both the Snow Leopard install DVD, which contains the 3.0 version of the Drivers, and the 3.1 driver update which can be download from Apples download site.
    The version number of the BootCamp Assistant in OSX is either 3.0 when you use OSX Snow Leopard or 2.0 if you use OSX Leopard.
    http://support.apple.com/kb/HT3986
    To my knowledge the Windows 7 Release Candidate is only valid for use till the end of March, so it might be time to buy the full version.
    Regards
    Stefan

  • Error downloading Boot Camp Drivers.

    When I try to download Boot Camp drivers for Windows, a message pops out, saying something about an error with the apple servers. I tried to download the drivers (for Windows 8) manually from the Apple Page, but when i try to install it (in Windows), another error message pops out, saying that mi computer is not compatible with that. (Latest version)

    Purchase Snow Leopard install disk.
    http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
    Info regarding Windows
    http://support.apple.com/kb/TS3648

Maybe you are looking for

  • Help with getting GB to recognise Yamaha NP30 via Tascam US-122MKII?

    I am using a midi OUT connection from my Yamaha NP30 keyboard to the midi IN of a Tascam US-122mkII interface. The Tascam is connected to my Mac via USB (port 1). Tascam software is installed correctly. When I open GB and select 'Piano' in 'New Proje

  • Pc or Mac for Uni please help!

    I start uni soon my old toshiba is soon dead. I need a computer. I would love a macbook or macbookpro. The uni has some softwares - open uni - which are pc only. They recommend Pc. Now with a mac would I be ok? Like i know you can out windows on it ,

  • Passing Parameters between Java Portlets

    i hava java portlet and it does a search... the search result appears within the portlet region.... but i want to be able to click on the search button and take it to another portal page and have a portlet that contains the result of the porltet... h

  • Do you know how to.........

    when i moved my music on to my imac i did it in two parts woth where 20gig or so the first load i forgot to get itunes to automatically copy and store so its in its own music folder. the second part i did remember and it put it all neatly in to it ow

  • Why does the webcam not work?

    why does the webcam on my macbook pro not work? http://www.surfclubdrusus.nl/webcam.html neither on safari nor on firefox i have the new flash player installed