HT201656 repairing record is missing

im trying to restore my iphone 4 S but i keep getting itunes could not connect to the iphone because the pairing record is missing.

I got the same error tonight.
Was having some odd problems with my iPod touch (16GB, v1.1.3 with January software upgrade) occasionally changing the date and time to Dec. 31, 1969, also getting stuck in caps lock mode, so I decided to restore.
First attempt at a restore failed. Second attempt looked like it succeeded, with a message that came up after the firmware restore that said the iPod would reappear in iTunes after it finished restarting. After a long wait, the iPod restarted with the "connect to iTunes" image, then went black. A short time later, a window popped up with the message about the missing pairing record.
Two, three or four attempts at disconnecting and reconnecting the cable all resulted in the same error message. I started writing this post, in fact, to report I was stuck with the same unusable iPod, when I reconnected the cable to make sure I had the wording of the error message correct.
Wouldn't you know? It connected just fine, asked me if I wanted to restore my settings and at the moment is syncing back all my music and movies. I'll return here if I see any more problems, but I'm keeping my fingers crossed that all's well.

Similar Messages

Updating ipod touch to os5.1 got an error message "cannot connect the ipod touch because the pairing record is missing"   don't know what this means or how to fix but am stuck, only option is to answer ok and close the error box. Any ideas?

Updating ipod touch to os5.1 got an error message "cannot connect the ipod touch because the pairing record is missing"   don't know what this means or how to fix but am stuck, only option is to answer ok and close the error box. Any ideas?

#1
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- If a 5G iPod
Iphone 5 lightning port charging problem - SOLUTION!
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
#1.1 n/a because the errror message overrides it
#2 see #1
#3 iOS: Device not recognized in iTunes for Mac OS X
But could be caused by #1
#4 Covered by previous ones
#5 Obvious jpegs are photos and thus will not sync as videos. Also see:
iTunes: May be unable to transfer videos to iPhone, iPad, or iPod
iTunes: Frequently asked questions about viewing and syncing videos
#6 iOS: If you can't back up or restore from a backup in iTunes
First #7 See #6
Second #7 You have so many other problems resolve those first
#8 Resolve other problems first

Condition record is missing in sales order

can u please help me on my issue,my issue is in my sales order there are the different types of materials are there,on which the tax is applicable as12.5% on few materials,20% on few materials,on service materials tax is 10%, 2%, 1%,depending on this i have mapped the conditions and it is calculating accordingly,but when i see in sales order by selecting one material,when i go to conditions,analysis of that particular line item,it shows 10% 2% 1% condition records are missing,same wise verse when i select another condition and see the analysis it shows 12.5% condition record is missing,when i go and select the another condition,if i check the analysis it shows 20% tax condition record is missing,but its not throwing any error,and showing document is complete,can any one suggest is it the right procedure or i have to make any changes in to it.

Hi
I see no issue in this. It is correct system behaviour.
When you have different tax rates for different materials, obviously the condition records will be accessed based on the entries maintained for each material.
E.g For material with 12.5% tax rate when you check in vk13, you will find only that entry and no entries for 20% and 10%, 2% and 1%.
So the access sequence fetches only what has been maintained in VK11 for each material.
This is absolutely fine. Go ahead and save the order.
Regards
Madhu

Data Records are missing in between while loading from R/3 (ECC) to BI.

Dear Experts,
I have created a custom DataSource on Custom Function Module. This datasource contains 600 fields. (I know its a monster and splitting options are thinner).
1) Validate the data using RSA3 in R/3 and showed the correct record count.
2) Validate the data by debugging the FM, still showed the correct record count.
But while loading from R/3 to BI, records are missing.
Various Scenarios load from R/3 to BI:
1a) Loaded full load (78000 records) with all default data transfer settings. PSA showed up with 72000 records (missing 6000) only. Compared the Idocs vs data packets, both reconciled.
1b) Loaded full load (78000) with modified settings (15000 KB / data packet). PSA showed up with 74000 records (missing 4000) only.
2a) Loaded with selection parameters (took a small chunk) (7000 records) with default data transfer settings. PSA showed up only 5000 records (missing 2000).
2b) Loaded with selection parameters (7000 records) with modified settings (15000 KB / data packet). PSA showed up all 7000 records.
3a) Loaded with selection parameters (took further small chunk) (4000 records). PSA showed up all records regardless data transfer settings.
Also please look at this piece of code from the function module,
IF l_wa_interface-isource = 'ZBI_ARD_TRANS'.
l_package_size = l_wa_interface-maxsize DIV 60.
ENDIF.
I really appreciate your advise or help in this regard.
Thanks much,
Anil

Hi,
Which module u want?
if its SD(for example)
steps>>
1>In AWB goto "business content"
2> goto "Info provider"
3>Under infoarea select SD cubes
4> Drag related cubes and ODS to right panel
5> Set the grouping option "In Data flow before&afterwards"
6>Install the collected objects
Go to R/3
7> Use Tcode RSA5 Transfer all regarding SD module datasources
Goto BW
8> Right click on the source system "Replicate datasources"
[DataSources|http://help.sap.com/saphelp_nw70/helpdata/en/3c/7b88408bc0bb4de10000000a1550b0/frameset.htm]
Edited by: Obily on Jul 10, 2008 8:36 AM

TS2776 I get a message that says"ITunes could not connect to IPhone becuase the pairing record is missing" I never saw this error message before. Anyone knpw what's up?

I get a message that say: ITunes could not connect to IPhone *** because the pairing record is missing" I never saw this before anyone know about this??

Do you still get that one if you restart the PC and try to connect again?

Error in SXMB_MONI - "Message Recorded (Commit Missing)"

We have implemented BADI BADI_LE_SHIPMENT~BEFORE_UPDATE to call asynchronous proxy to send a message to PI system. This proxy is called inside a loop to send message for each delivery in the shipment. Some messages are successful and some are in scheduled status with error 'Message Recorded (Commit Missing)'. This error is coming only for particular interval and we dont see any PI outage at that time. And also we do not see any entries in queue(SM58, SMQ1, SMQ2). Searched in SDN, people are suggesting to use commit work after the proxy call but I am concerned to use commit inside a Badi. I have more than 1000 messages in production, can not reprocess all the messages manually from SPROXY. Please give me your suggestion to resolve this issue.

Hi,
If u want to manually unlock then u need to go to transaction SMQR,SMQ1,SMQ2 for queue management. There u have to select the queue and activated all entries.
SMQ1 qRFC Monitor for the outbound queue You use this transaction to monitor the status of the LUWs in the outbound queue and restart any hanging queues manually.
SMQ2 qRFC Monitor for the inbound queue. You use this transaction to monitor the status of the LUWs in the outbound queue.
U may schedule the report RSQOWKEX (Outbound Queues) and RSQIWKEX (Inbound Queues) to restart the queues automatically.
After that please register the queues via t.code sxmb_adm where u have an option manage ques.
Once you register the queues, they default activated.
Regards,
Pradeep A.

Few records are missing while downloading to a Spreadsheet from a Report

Dear Gurus,
few records are missing while downloading to a Spread sheet from a Z report. There are around 300 records, out of which 11 records are not appearing in Spreadsheet file after saving. But, the funny thing is when i try to save in other format like, HTML or to a clip board all records are coming.
When asked, the ABAPer said -
your report is coming correctly. if the report is wrong then we can try checking some code in the Z report. Saving it into Spread sheet is the standard program provided by SAP.
He is also facing this problem for the first time.
Can anybody help.
Thanks in advance and u will get points if useful.
Regards

Hi,
Few days back we got this kind of error, when i tried to down load the asset balances in excel format.
It was observed that, for one of the asset description ends with cama",". Due to this reason all other details has been stored in single cell. Once we changed the master data of that asset, then we able to get the report properly.
2) Some other time, when we tried to download material master details, for one of the material ... description not maintained. this is another issue. After maintain the description problem got resolved.
Hope this information will be helpful to u.

IPad and ITunes - Pairing record is missing

I have a new IPad and trying to sync it with my current ITunes account on my computer and I keep getting the following message "pairing record is missing". I have searched discussion board and help but there are no answers how to rectify this. Help

Disconnect the iPad and try another USB port on your computer or quit iTunes, reboot your computer, restart your iPad and try again.

HD Video Recording app missing?

HD Video Recording app missing?
I restored my iPhone 4S with my latest backup from previous model, but HD camera seems to be lost. What should I do?
Thx for any help.

If you are talking about the Camera app it can't be deleted. Look through all your screens and inside all your folders. If you still can't find it go to Settings>General>Reset>Reset Home Screen Layout. This will restore the home screen to its original configuration and apps, but may move other apps around to accomplish this.

How do i fix pairing record is missing

I have the latest iTunes and the latest iPod Touch OS. I connected my iPod to the computer for the first time and got the message "iTunes could not connect to the iPod "Larry's iPod" because the pairing record is missing.
How to I fix that problem.
Also, when I connect the iPod to the computer using the USB cable connection tothe computer, it does not sync the songs.
How do Ialso fix that.
My computer OS is Windows 7.

NushNush18, did you notice that the post is over 1 1/2 years old. I do not think the poster is still waiting for a solution.

Outbound Proxy - Message Recorded(Commit Missing)

Dear All,
The proxy's are configured correctly, and when tested the message getting created with status as Message Recorded(Commit Missing).
SLDCHECK transcation is also sucessfull!
No application Log exist at transaction SLG1!
What could be the reason for message not processed further?
Thanks & Regards,
Jilan Bhasha

Do the messages in ur ECC sxmb_moni show a green flag...oif so it a simple commit use..
Write this code at the end of your Proxy call -
Commit work.
regards,
arvind R

About OGG-01028 recovery record is missing error

Hi! everybody,
My enviroment is :windows server 2008 64bit ,oracle 11GR2,goldengate 11.1.1.1.I often meet the error :ogg-01028 recorery record is missing .
In mos,I found the relative article((Doc ID 1094767.1)
In this Document
Symptoms
Cause
Solution
References
Applies to:
Oracle GoldenGate - Version: 10.4.0.19 to 11.1.1.1.0 - Release: 10.4.0 to 11.1.1
Information in this document applies to any platform.
Symptoms
Extract abended with:
2010-05-04 15:42:23 GGS ERROR 190 Recovery record is missing from log with seqno 14496 when extract has reached log with seqno 14497, block size 512, and next_checkpoint RBA at 149274704.
in later OGG version, the error code is like following:
OGG-01028 Recovery record is missing from log with seqno 1934 when extract has reached log with seqno 1935, block size 512, and next_checkpoint RBA at 83962348.
Archive logs 14497 & 14498 exist, and restarting extract failed with same error.
Cause
The extract was manually stopped and current/next checkpoint is set to a zero length record in redo. This is a very rare condition, and the chance of hitting it is also low. When this extract was restarted, the error occurred. Extract's Current/Next checkpoint is set to a zero length record at the end of a log and on restart this zero length record is skipped as it has no useful data. Since this record is skipped the recovery code thinks this record was missed and generates an error.
This is bug 12693183, 12693291.
Solution
This bug is fixed in v11.1.1.1 with patches for bugs 12693183, 12693291.
The following workaround may also be used with no data loss.
Workaround: change the current checkpoint RBA to next block boundary, keep the recovery checkpoint the same
1. Get block size of your platform.
The block size is shown in the error message.
2010-05-04 15:42:23 GGS ERROR 190 Recovery record is missing from log with seqno 14496 when extract has reached log with seqno 14497, block size 512, and next_checkpoint RBA at 149274704.
For reference the following lists the block size of major platforms:
AIX, Linux, Sun, Windows & VMS: 512 Bytes
HP-UX, Tru64: 1024 Bytes
S390, MVS: 4096 Bytes.
2. Backup the checkpoint file in directory dirchk
3. info <ext> showch
Get current and recovery checkpoints, example:
EXTRACT EIDLD Last Started 2010-05-04 16:39 Status ABENDED
Checkpoint Lag 01:14:54 (updated 01:14:41 ago)
Log Read Checkpoint Oracle Redo Logs
2010-05-04 15:24:21 Seqno 14496, RBA 149274704
Current Checkpoint Detail:
Read Checkpoint #1
Oracle Redo Log
Startup Checkpoint (starting position in the data source):
Sequence #: 14496
RBA: 149273104
Recovery Checkpoint (position of oldest unprocessed transaction in the data source):
Sequence #: 14496
RBA: 149273104
Current Checkpoint (position of last record read in the data source):
Sequence #: 14496
RBA: 149274704
4. Alter both recovery checkpoint and current checkpoint to the start point of next block number
alter <ext>, extseqno <seq#>, extrba <rba#>
In the above example:
SQL> select ceil (149274704/512) * 512 from dual;
CEIL(149274704/512)*512
149275136
seq# remains the same as in the showch display.
ggsci> alter extract <ext>, extseqno 14496, extrba 149275136
If the new rba number is bigger than the current file size of the archivelog file, you have to alter both checkpoint to start from RBA 0 in next seqno file.
For example, if the size of archived log that has seqno 14496 is only 149275000, which is smaller than the new RBA calculated, 149275136, you have to issue the following command
ggsci> alter extract <ext>, extseqno 14497, extrba 0
5. Alter the extseqno and extrba of recovery checkpoint back to its original recovery checkpoint position
In this example,
ggsci> alter extract <ext>, ioextseqno 14496, ioextrba 149273104
6. info <ext>, showch
Confirm the change.
7. start <ext>
Note: Above example is for extract without threads option. For extract with threads option, "thread <thread#>" is needed for "alter extract " command.
e.g., "ggsci> alter extract <ext>, extseqno 14497, extrba 0" will be "ggsci> alter extract <ext>, thread <n>, extseqno 14497, extrba 0" (here, <n> is the ogg thread number).
My question is :This bug is fixed in v11.1.1.1 with patches for bugs 12693183, 12693291.My goldengate version is 11.1.1.,is it need any patch to avoid the error?If the patch can not resolve the problem ,can I use some utilities ,such as logdump,logmnor to find the relative sql detail when the extract abends.

Well, you have the seqno and RBA (where extract abended, on a zero length record). You could assume that the record before was good to go, and that should give you an idea of the relative SQL. You could also get down and dirty with Logminer, using the SCN as a starting point to find the last good record shown in the trail.

New IPad error message when connecting to Itunes: Pairing record is missing

Pairing Record is missing and Itunes can not connect to my ipad. How do I resolve?

These directions should help you: http://computerknowhow101.com/iso/a-fix-for-pairing-record-missing-error

Quicktime Pro 7: Screen Recording is missing

Hello
I downloaded Quicktime Pro 7 to be able to record my screen.
The problem: there is no function "New Screen Recording" appearing!
There are only these functions:
New Player
New Movie Recording
New Audio Recording
New Screen Recording ist missing!
What can I do?
Thx for help
Christine

Wait what do you mean Q T 7 whats that
Classic version of QT based on a 32-bit structure embedded in the operating system as opposed to Apple's completely re-written version of QuickTime now under development using 64-bit embedded structures compatible with QT X Players v10.0, 10.1, 10.2 and 10.3 on a Mac. Both players can be installed on and used by Snow Leopard and later operating systems which have dual QT structures embedded within Mac OS X. However, only the QT 7 player can be keyed for QT 7 "Pro" use and is the player about which the original poster here was asking.

XML Status : 'Message recorded, commit missing"

Hi,
I am calling my proxy in a BADI. After triggering it, when I go and check in SXMB_MONI, the status of XML message is "Message recorded, commit missing". And it is in Scheduled status.
Could you please let me know, why this message will come, and how to make it run successfully.
Thanks,
Sandeep

I think you are gettking this error in transaction SXI_MONITOR in ERP system. As replied earlier by Divyesh, you need to write commit work statement in ur BADI after calling the proxy method.
If you test this proxy from transaction SPROXY, then also u will see this error with ur message and u need to trigger Commit work/Rollback explicitly to send message to central PI server. While testing ur proxy from SPROXY u can trigger Commit/Rollback from menu
Extras - > Trigger COMMIT WORK / Trigger ROLLBACK WORK

HT201656 repairing record is missing

Similar Messages

Maybe you are looking for