HT201673 I would like to use cellular data for internet and my home network for printing, without having to cycle wireless on and off every time I print

the only internet connection I have at my home is a cellular connection. It is very unproductive having to turn wifi on to print and then back off to reconnect to cell service. Looking for options. I own a linksys e2500 router that I currently network through, but it has no internet connection, as no home internet available in my area.

You can have a go using a wireless bridge.. eg the airport express will do this.. you can join it to the iphone wireless running as a hotspot.. and then plugged into the TC wan port.. the TC has to be setup in router mode.. so this is going to give you double NAT errors.. and of course errors for all the time the hotspot is turned off.. but it can work. However you might find it requires you to manually connect up each time.. If you are really going to try and do this you will manage it.. but how fiddly it becomes might put you off after a week.
You will chew up your 5GB very fast using any streaming media even radio. So be very careful to track the usage.
Apple should have built in the TC the ability to plug in a wireless 3G modem.. via the USB but Apple have ceased to do adventurous stuff.
If you give up the TC as main router there are plenty of better products on the market that will handle multiple wan connections.. !!

Similar Messages

Hi, I am bringing my verizon iPad air to Brazil later this month and would like to access cellular data. How do I do that? Thanks in advance.

Hi I am bringing my verizon iPad air to Brazil later this month and would like to access cellular data. How do I do that? I understand there is something about swapping or disabling sim cards, but I am a little unclear and verizon was no help. Thanks for your help in advance.

You must have Verizon unlock the device from their service. In Brazil you will have to find a compatible provider and use their SIM in place of Verizon's SIM

I have an I phone 4 that I use in Singapore, but would like to use it in the US while on holiday. How do I cahnge out the sim card, and is there anything else that I need to do.

I have an I phone 4 that I use in Singapore, but would like to use it in the US while on holiday. How do I change out the sim card, and is there anything else that I need to do?

Ignore the other post (the one from Brendan), he has no idea what he is talking about.
Read your manual (you have a bookmark to it in Safari on your iPhone or put iBooks on your iPhone and download the manual from the iBookStore) and it will show you how to remove the microSIM from your iPhone. AT&T is not tourist friendly and does not offer a pay as you go plan for visitors with an iPhone. If you are going to be here for a short time you can probably buy a pay as you go microSIM and use it before AT&T notices, if it is going to be for a long time that won't work.
There is a 3rd party company that will sell you a microSIM that will work with AT&T but they are pretty pricey.
Finally, you can get a pay as you go microSIM from T-Mobile to work with your iPhone but you will only have EDGE data speeds.
Message was edited by: deggie

I would like to use GarageBand to remaster downloaded music files that are in iTunes. Poorly mastered files keep clipping and damaging my speakers. When I try to use an iTunes file as a new project, it greys out the iTunes songs so I can't select them.

I would like to use GarageBand to remaster downloaded music files that are in iTunes. Poorly mastered files keep clipping and damaging my speakers. When I try to use an iTunes file as a new project, it greys out the iTunes songs so I can't select them. Any ideas?

As I said - look whether your original file is damaged or not. If not, I wouldn't change it and find out what in your system makes it sound like it's clipping.
Good sound file, with volume maxed out. No need to change anything.
The same song clipped - no chance to repair.

I am a teacher who would like to use my Ipad2 in the classroom -but out school only has projector that has VGA inputs. And just to complicate thing I was to use it wirelessly (I have an Itv also). Can I get true mirrioring?

I am a teacher who would like to use my Ipad2 in the classroom -but out school only has projector that has VGA inputs. And just to complicate thing I was to use it wirelessly (I have an Itv also). Can I get true mirrioring?

The one you are looking at I believe is an older model and does not have very good reviews for working with an AppleTV2 / iPad 2 setup.
Here is the one that has worked for our district:
http://www.amazon.com/ViewHD-Component-Converter-Support-Surround/dp/B004F9XVBC/ ref=pd_cp_e_2
I can't say if the one you are referring two works or not, however I can say that based on the reviews, it looks like you may run into problems with the $45 version.

I have a free app on my iphone, i would like to get it to my ipad..how do I get it without having to start over the entire game?

I have a free app on my iphone, i would like to get it to my ipad..how do I get it without having to start over the entire game?

If you use the same Apple ID on both devices, you can share apps, but you won't share the progress I'm afraid.

I have a USA DVD which I would like to play on my macbook pro. How can I do this without having to use up options to convert between regions which are limited

I have a USA DVD which I would like to play on my macbook pro without using up the options to switch regions. Is there a way to do this?
Also can it be done through a DVD player attachment to an Ipad?

program called MDRP to rip it...... then use Wondershare to convert it, also Iskysoft video converter is an option.
You dont have to put it ON the Ipad, once on the Mac, you can Stream it wifi to the Ipad using the $2 program called VLC STREAMER (not VLC, but streamer made by VLC),.... best APP for your Ipad to stream videos from your MAC to your Ipad.
A direct DVD to MP4 converter : http://www.xilisoft.com/dvd-to-mp4-converter-mac.html

HT1151 I WOULD LIKE TO USE MY PLAYSTATION 3 GAME CONTROLLER ON MY IMAC FOR CALL OF DUTY4CAN IT BE USED

i wouu;d like to use my playstation game controller on my imac for call of duty is it possable

Take a look at:
http://www.mactrast.com/2013/01/how-to-use-a-playstation-3-controller-with-your- mac/
MtD

I would like to use Mozilla instead of internet explorer

How to install Mozilla and use it instead of Internet Explorer? I heard it is better.

https://support.mozilla.org/en-US/kb/install-firefox-windows

What happens if I switch off the "Use Cellular Data for Facetime"?

So I got a notice saying that my phone's storage was almost full which makes no sense to me because I barely have about 300 pictures on my phone, barely any apps, but I do have music. I have mail turned OFF, and I am always on WIFI. I don't know how this is a problem.
So what would happen if I pressed the switch off button for the "Use Cellular Data for: facetime"?
I use facetime A LOT with my friends WHILE ON WIFI but if this is causing my storage to go so full, I will do it.
Please heLP!

Using cellular data has nothing to do with the storage capacity on your phone. By turning it off you will only be able to FaceTime when your connected to wifi, thus saving you on your data plan if you do not have unlimited data from your carrier.
You can go to settings > usage to view what is filling up the capacity of your phone. You should import and back up your pictures to your computer following the directions here http://support.apple.com/kb/HT4083

I have DSL on my PC and would like to use it with IPad2 - how can I do this

I have DSL on my PC and would like to use it with IPad2 how can I get this set up.

All you need is wireless. If the DSL modem does not provide routing services or does not provide wireless, then you need to get a wireless/wired router. If the modem provides wireless, then that's all you need. Consult the user manual for the DSL modem or talk to your service provider.

Would like to use SUN Jato GUI Framework in my app

Hi Everyone,
not sure if this is the correct forum to post this..
i have an existing web app that i would like to use the jato framework.
i took a simple page from the jato/glassfish app: welcome.jsp/.java and copied it to my app directories (also copied the needed, tld's jars etc)
i googled and only get 1 hit to the error message which really didn't help me.
exception
javax.servlet.ServletException: javax.servlet.jsp.JspException: The request context is null - this page must be accessed through a servlet
root cause
javax.servlet.jsp.JspException: The request context is null - this page must be accessed through a servlet
com.iplanet.jato.taglib.UseViewBeanTag.doStartTag
i looked at the jatosample application, but am trying to figure out what it is I need. obviously its a servlet but what,where, how,why
<code>
<html>
<%@page info="HelloWorld" language="java"%>
<%@taglib uri="/WEB-INF/tld/jato.tld" prefix="jato"%>
<jato:useViewBean className="jatosample.module1.HelloWorldViewBean">
<head>
<title>JATO Sample Application</title>
</head>
<body>
Hello, world!
</body>
</jato:useViewBean>
</html>
</code>
any guidance appreciated.
Johnny
Message was edited by:
sticcino

I don't use that device, but two links with more information
-what is in the entire Cloud http://www.adobe.com/creativecloud/catalog/desktop.html
-http://www.adobe.com/products/catalog/mobile._sl_id-contentfilter_sl_catalog_sl_mobiledevi ces.html

I just got iTunes Match and I would like to know if downloading my songs from the cloud uses cellular data?

I just got iTunes Match and would like to know if downloading my songs from the cloud uses cellular data if I am not able to use wifi?

Hi,
Yes, it will use cellular data. If you know that you are going to out of wifi range, you can predownload some music whilst you have a wifi connection.
Jim

HT1688 when you double tap the home button to go back to your other apps are those apps always running and using cellular data even if I am not currently using them? I thought it froze them and didn't use data other that a select few apps like Facebook,

when you double tap the home button to go back to your other apps are those apps always running and using cellular data even if I am not currently using them? I thought it froze them and didn't use data other that a select few apps like Facebook, email, etc. Also I always select no when I download an app and it wants me to have those push notifications. Because that would mean that I would have to delete my apps after everytime I just them from that bar and that would be very annoying and just stupid. Or maybe apps do use data and it's just a big scheme to make everyone go over on their data plans.

This should help: http://speirs.org/blog/2012/1/2/misconceptions-about-ios-multitasking.html.

I would like to use DDE to send data from a Lookout Server to an Excel

Hello National Instruments,
I would like to use DDE to send data from a Lookout Server to an Excel
Spreadsheet.
I have Lookout 6.1 on a server connected to 4 client workstations
The operating system on the server is Windows Server 2003 R2; Standard Edition;
Service Pack 2
I have opened DDE Share but after filing in Share Name; Static Application
Name; Static Topic Name
I get a message, "Can't bind to DSDM service"
I also get this message when I press add a Share
What are the steps to setting up this type of communications link?
Thanks,
David Lopez
Scada Functional Analyst

Ryan,
I have followed the steps on the Knowledge Base "How do I use DDE To Send Data Across the Network To Excel From Lookout?" but what I am seeing is that the computer with excel (Computer B)hangs up displaying an hour glass continuously leaving me no option but to go into task manager to stop excel. It appears to me that the dde share is not working properly on my windows xp where lookout resides or I do not have a certain service turned on. I do have the DDE services turned on both computers. I have my computer set up as computer A with Lookout and Process1 as the process with a pot set up as pot1. On my computer (Computer A) I also have the dde share set up per the KB example.
On computer B I have the dde services turned on and I am typing the following into an excel worksheet Cell ='\\TAG23232\NDDE$'|'Process1$'!Pot1
TAG 23232 is Computer A's Name
Do you have any suggestions???

HT201673 I would like to use cellular data for internet and my home network for printing, without having to cycle wireless on and off every time I print

Similar Messages

Maybe you are looking for