HT201794 How to write Turkish on computer?
Hello everyone,
I bought a laptop from Malaysia and I am now living in Turkey.
Sometimes I have to write in Turkish language on my computer.
So, I want my Macbook's language (the normal language) English. But sometimes I want to write in Turkish.
How to do it? (I don't have any knowledge of how to install turkish keyboard or something like this. I am sorry for that...)
Please help me.
Thank you very much for your instant reply...
I did the things you have suggested.
I went to 1. System Preferences > 2. Language and Text > 3. Imput Sources, and ticked Turkish.
Please see the screen shot.
What else?
Then If I want to write will I be able to write in Turkish?
Thanks again...
Similar Messages
-
How to write a formal Computer Process in Illustrator?
I just bought the new illustrator and I was wondering how to use it for a process. I am a process analyst and I do not like using Microsoft Word. The processes do not look nice enough for me. I was wondering if people had good pits for me and what should I use to make a formal process? Thank you.
Steve,
It's just a workflow diagram; in this case, one specifically for software logic or schema. Quite commonly provided for in drawing programs other than Illustrator (just like basic dimension tools, callouts, live shape primitives, etc., etc.). Microsoft Publisher, Visio, even Word; CorelDraw, OpenOffice. Not Illustrator.
There are standardized box shapes for different disciplines. In software schema, a rectangle is a process step, a diamond is a decision, etc. The boxes typically auto-expand to fit their text.
So yeah, you can make such diagrams in Illustrator, but it's an entirely manual process; ridiculously tedious and time-wasteful because of Illustrator's sub-standard feature set.
Yeah, you could reinvent the wheel by pre-drawing the shapes and storing them as Symbols. But that doesn't give you auto-fitting text behavior. Illustrator could at least accommodate this and more by simply enabling its utterly lame and unintuitive (i.e.; completely screwball) Convert To Shape feature to position and scale any Symbol, instead of being limited to dumb ellipses and rectangles. But no, we'll each pay another $6000-worth of "upgrade" fees before ever seeing such an obvious improvement in year 2032. Just one of many examples of feature non-integration in Illustrator.
Yeah, you could turn on grid snap, manually draw your workflow lines, and move them around segment by segment. But when working on workflow diagrams, you're concentrating on working-out the subject matter. Instead of continually manually adjusting a bunch of dumb disconnected lines, you freely move things around without breaking connections you've already established, and the live connection lines automatically avoid collisions, draw crossovers, etc. But no, a proper connector lines feature is too "ordinary" or "technical" for "professional" and "artsy" Illustrator. Really? Draw's Connector Lines are not just for flowcharts. Unlike most implementations, they can be attached at the Node level. So they can be used to draw extrusions based on outlined text or any other shapes. The depth of the extrusions can then be adjusted by simply dragging the connected shapes. (But wait; Draw also has a proper, straightforward 2D Extrusion Tool, too.)
So this is just one of those subjects that raises the question: Why kick against the thorns by wasting time with Illustrator for this? Use a more full-featured drawing program with less unintuitive non-standard nonsense, less gratuitous ballyhoo over ordinary functionality, and more task-driven practicality.
JET -
How to write this assignment in oom way(long)
i try to write a new class, but i am not very sure if there is only one new class, I shall write a Movie class or a Ticket class?
this is my Movie class, if I also want to write a new Ticket class. and still i don't know how to write
because the Ticket class uses some of the attributes of the Movie class such as start time, Movie.name, as in this situation the relation
between Ticket and Movie is still aggregation, or become a generalization?
and how to represent that a Movie can have many Tickets? I shall write a buy-ticket method inside the Ticket class or Movie class.
(are there any thing not right with this movie class? thanks)
============================
class Movie
String name;
String startTime;
String [] coupleChair=new String[11];//start from 1 to 10
String [] singleChair=new String[11];//start from 1 to 10
public Movie(String str1st)
this.name=str1st;
public Movie(String str1st, String str2nd)
this.name=str1st;
this.startTime=str2nd;
public String buyA_Single_Ticket()
int i=1;
do
if(this.singleChair!="sold")
this.singleChair[i]="sold";
return "You seat is Single Seat No."+i+"\n Enjoy the movie :)";
else i++;
while(i<=10);//when i==11 jump out
return "Sorry, all Single seats have been sold Out";
public String buyA_Couple_Ticket()
int i=1;
do
if(this.coupleChair[i]!="sold")
this.coupleChair[i]="sold";
return "You seat is Couple Seat No."+i+"\n Enjoy the time ;)";
else i++;
while(i<=10);//when i==11 jump out
return "Sorry, all Couple seats have been sold Out";
}//end class
============================
this is the question
A small ABC cinema has just purchased a computer for its new automated reservations system. You have been asked to program the new system. You are to write a Java application to assign seats on each movie show on the day (capacity: 20 seats for 1 movie).
Your program should display the following alternatives: ��Please type 1 for couple seat section�� and ��Please type 2 for normal seat section��. If the user types 1, your program should assign one seat in the couple seat section (seats 1 �C 10). If the person types 2, your program should assign a seat in the normal seat (seats 11 �C 20). Your program should also prompt for the movie time and movie name.
Your program should then display:
I. The person��s seat number
II. Whether it is a couple seat or normal seat of the cinema
III. Time, date, movie name
Your program should never assign a seat that has already been assigned. When the normal seat section is full, your program should ask the person if it is acceptable to be placed in the couple seat section (and vice versa). If yes, make the appropriate seat assignment. If no, print the message ��Next show is in 3 hours time.��
(it is just a small test on my OOM learning, I know it is not necessary to make it so complex.)Break down your problem into discrete chunks. The more you practice this, the more your initial thoughts will resemble the eventual objects that you will create.
Let's take address a few of your issues:
What has the start time? Is it the ticket or the movie? (Hint: Would someone ever print you out a ticket with a different start time than the movie's?)
If ticket and movie share some attributes, then you can either use inheritance or composition/delegation. In this instance, what makes more sense to you? Is a ticket a movie or vice versa? Or is a ticket simply related to a movie?
If a given object can contain several instances of another object, you will want to use either an array or a collection, probably List in this instance.
Why is there no Theater object? A movie may play at multiple theaters. Each theater has a capacity (in terms of total seats and number already booked). This does not really have anything to do with the movie. It is the Theater that you are booking. It may also have which movies are showing at which time.
Your notion of 'couple' booking seems strange. Why not have a concept like 'consecutive seats required'? That way, your design is more flexible and you can still accomodate couples.That should get you started. Best of luck.
- Saish -
Really need help on how to write this program some 1 plz help me out here.
i am new to java and i confused on how to be writing this program.
i have completed the Part 1 but i am stuck on Part 2 & 3 so it would would be really great if any 1 could help me out on how to write the program.
Part I
An algorithm describes how a problem is solved in terms of the actions to be executed, and it specifies the order in which the actions should be executed. An algorithm must be detailed enough so that you can "walk" through the algorithm with test data. This means the algorithm must include all the necessary calculations.
Here is an algorithm that calculates the cost of a rectangular window. The
total cost of a window is based on two prices; the cost of the glass plus the cost of the metal frame around the glass. The glass is 50 cents per
square inch (area) and the metal frame is 75 cents per inch (perimeter).
The length and width of the window will be entered by the user. The
output of the program should be the length and width (entered by the user)
and the total cost of the window.
FORMULAS:
area = length times width perimeter = 2 times (length plus width)
Here is the corresponding algorithm:
read in the length of the window in inches
read in the width of the window in inches
compute the area
compute the cost of the glass (area times 50 cents)
compute the perimeter
compute the cost of the frame (perimeter times 75 cents)
compute the total cost of the window (cost of glass plus cost of frame)
display the length, width and total cost
The next step would be to "desk check" the algorithm. First you would need to make up the "test data". For this algorithm, the test data would involve making up a length and a width, and then calculating the cost of the window based on those values. The results are computing by hand or using a calculator. The results of your test data are always calculated before translating your algorithm into a programming language. Here is an example of the test data for the problem given:
length = 10
width = 20
area = 200, glass cost= 100.00 (area times 50 cents)
perimeter = 60, frame cost = 45.00 (perimeter times 75 cents)
total cost =145.00
Once the test data is chosen, you should "walk" through the algorithm using the test data to see if the algorithm produces the same answers that you obtained from your calculations.
If the results are the same, then you would begin translating your algorithm into a programming language. If the results are not the same, then you would attempt to find out what part of the algorithm is incorrect and correct it. It is also
necessary to re-check your hand calculations.
Each time you revise your algorithm, you should walk through it with your test data again. You keep revising your algorithm until it produces the same answers as your test data.
?Now write and submit a Java program that will calculate the cost of a rectangular window according to the algorithm explained. Be sure to prompt for input and label your output.?
Part II
Write, compile and execute a Java program that displays the following prompts:
Enter an integer.
Enter a second integer
Enter a third integer.
Enter a fourth integer.
After each prompt is displayed, your program should use the nextint method of the Scanner class to accept a number from the keyboard for the displayed
prompt. After the fourth integer has been entered, your program should calculate and display the average of the four integers and the value of the first integer entered raised to the power of the second integer entered. The average and result of raising to a power should be included in an appropriate messages
(labels).
Sample Test Data:
Set 1: 100 100 100 100
Set 2: 100 0 100 0
Be sure to write an algorithm first before attempting to write the Java code. Walk through your algorithm with test data to be sure it works as anticipated.
Part III
Repeat Part lI but only calculate the average, not the power. This time, make sure to use the same variable name, number, for each of the four numbers input. Also use the variable sum for the sum of the numbers. (Hint: To do this, you may use the statement sum = sum + number after each number is read.)
For Part 1 this is what i got
import java.util.Scanner;
public class Window
public static void main(String[] args)
double length, width, glass_cost, perimeter, frame_cost, area, total;
Scanner keyboard = new Scanner (System.in);
System.out.println("Enter the length of the window in inches");
length = keyboard.nextInt();
System.out.println("Enter the width of the window in inches");
width = keyboard.nextInt();
area = length * width;
glass_cost = area * .5;
perimeter = 2 * (length + width);
frame_cost = perimeter * .75;
total = glass_cost + frame_cost;
System.out.println("The Length of the window is " + length + "inches");
System.out.println("The Width of the window is " + length + "inches");
System.out.println("The total cost of the window is $ " + total);
Enter the length of the window in inches
5
Enter the width of the window in inches
8
The Length of the window is 5.0inches
The Width of the window is 5.0inches
The total cost of the window is $ 39.5
Press any key to continue . . .
Edited by: Adhi on Feb 24, 2008 10:33 AMAdhi wrote:
i am new to java and i confused on how to be writing this program.
i have completed the Part 1 but i am stuck on Part 2 & 3 so it would would be really great if any 1 could help me out on how to write the program.Looks like homework to me.
What have you written so far? Post it.
Part I
An algorithm describes how a problem is solved in terms of the actions to be executed, and it specifies the order in which the actions should be executed. An algorithm must be detailed enough so that you can "walk" through the algorithm with test data. This means the algorithm must include all the necessary calculations.
Here is an algorithm that calculates the cost of a rectangular window. The
total cost of a window is based on two prices; the cost of the glass plus the cost of the metal frame around the glass. The glass is 50 cents per
square inch (area) and the metal frame is 75 cents per inch (perimeter).
The length and width of the window will be entered by the user. The
output of the program should be the length and width (entered by the user)
and the total cost of the window.
FORMULAS:
area = length times width perimeter = 2 times (length plus width)
Here is the corresponding algorithm:
read in the length of the window in inches
read in the width of the window in inches
compute the area
compute the cost of the glass (area times 50 cents)
compute the perimeter
compute the cost of the frame (perimeter times 75 cents)
compute the total cost of the window (cost of glass plus cost of frame)
display the length, width and total cost
The next step would be to "desk check" the algorithm. First you would need to make up the "test data". For this algorithm, the test data would involve making up a length and a width, and then calculating the cost of the window based on those values. The results are computing by hand or using a calculator. The results of your test data are always calculated before translating your algorithm into a programming language. Here is an example of the test data for the problem given:
length = 10
width = 20
area = 200, glass cost= 100.00 (area times 50 cents)
perimeter = 60, frame cost = 45.00 (perimeter times 75 cents)
total cost =145.00
Once the test data is chosen, you should "walk" through the algorithm using the test data to see if the algorithm produces the same answers that you obtained from your calculations.
If the results are the same, then you would begin translating your algorithm into a programming language. If the results are not the same, then you would attempt to find out what part of the algorithm is incorrect and correct it. It is also
necessary to re-check your hand calculations.
Each time you revise your algorithm, you should walk through it with your test data again. You keep revising your algorithm until it produces the same answers as your test data.
“Now write and submit a Java program that will calculate the cost of a rectangular window according to the algorithm explained. Be sure to prompt for input and label your output.”
Part II
Write, compile and execute a Java program that displays the following prompts:
Enter an integer.
Enter a second integer
Enter a third integer.
Enter a fourth integer.
After each prompt is displayed, your program should use the nextint method of the Scanner class to accept a number from the keyboard for the displayed
prompt. After the fourth integer has been entered, your program should calculate and display the average of the four integers and the value of the first integer entered raised to the power of the second integer entered. The average and result of raising to a power should be included in an appropriate messages
(labels).
Sample Test Data:
Set 1: 100 100 100 100
Set 2: 100 0 100 0
Be sure to write an algorithm first before attempting to write the Java code. Walk through your algorithm with test data to be sure it works as anticipated.So this is where you actually have to do something. My guess is that you've done nothing so far.
Part III
Repeat Part lI but only calculate the average, not the power. This time, make sure to use the same variable name, number, for each of the four numbers input. Also use the variable sum for the sum of the numbers. (Hint: To do this, you may use the statement sum = sum + number after each number is read.)Man, this specification writes itself. Sit down and start coding.
One bit of advice: Nobody here takes kindly to lazy, stupid students who are just trying to con somebody into doing their homework for them. If that's you, better have your asbestos underpants on.
% -
I Want to make an app.. but i dont know how to write code or use Xcode... where I can begin?
Hey!
I just graduate from high school.. im gonna study Computer Enginnering. Im working for my family and they need an app that works like iBook. We have the eBooks and then they want me to do an app where they can sell the eBooks and read them. I have Xcode, but I dont know how to write codes or where to begin in all of this. I want to make the app first for iPad but if it can be for both iPad and iPhone better. I just want recommendation and help. Please and Thanks!!hello i hope your having a good day but can you reply to me if you got the codes to make an app because i want to make an app too thanks
-
How to write program to list the system directory(content of pc)
how to write a program that will display all the folder n directory of the pc like:
+My Computer
+c:
+d:Copy this line and save it in a file named "dirlist.bat":
for %%* in (%1) do dir /b %2 %1To use it, change to the directory it's in and at the command prompt type
dirlist directory [/s] directory is the name of the directory that you want listed.
/s is optional and will list the contents of all subdirectories also.
(You didn't say it had to be Java - use the right tool for the job) -
How do I ad more vertual memory?
Thank you for your reply.
In a message dated 12/2/2014 3:47:56 P.M. Pacific Standard Time,
[email protected] writes:
I have installed Photoshop elements 2 on my new computer. When I try to
open it it asks for more vertual memory. How do it? IThe computer has 16GB
ram
created by Peru Bob (https://forums.adobe.com/people/Peru+Bob) in
Photoshop Elements - View the full discussion
(https://forums.adobe.com/message/6980560#6980560) -
How to write firmware to ipw2200 serials wireless adaptor?
I have some ipw2200 cards with very low version of firmware, and I'v installed firmware card to my computer.
How to write firmware to the EEPROM of the cards?Thank you for your patient
With such a low version of fw, the card cannot work in windows.
And I can't dectect the device in wpa_gui. But I can see eth1 by iwconfig, it says the radio is off. -
I have questions regarding notes section , like how I write notes and they end up my my wife's phone !!!!!!
Yes, as Josh P said, I can see that happening if you sync with iTunes on the same Computer and the same mail account. Under the info section, advanced, I bet notes is checked for both of the devices..everything else might be un-checked, but notes might be checked for both devices...
-
After I reset my Ipod (deleted all data and settings) windows 7 doesn't recognize by ipod touch, and it doesn't appear in the itunes library or in the device menu, but it does charge. How can I get my computer to recognize it again?
Refer to this article:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538 -
How to write numbers in Arabic?
Hi All,
How to write numbers in arabic?
(how will you in normal papers....assume 123 to be in the arabic numerals here).
Should it be:
| -123|
(or)
| 123-|
Thanks,
JanaTry the following.
DecimalFormat formatter_ar=null;
Numberformat form = NumberFormat.getNumberInstance(new Locale("ar","EG"));
if(form instanceof DecimalFormat) formatter_ar = (DecimalFormat)form;
String str = formatter_ar.format(-123.45);
System.out.println(str); -
How to write a start routine in the trasnformations ?
Hi Experts,
I am working on BI 7, As I want to write a start routine in transformations of 0FIGL_O02 DSO, to allow the GL accounts with cost center data. Already there is a delete statement please find.
*DELETE SOURCE_PACKAGE where BAL_FLAG = 'X'. I had made comment to allow the G/L accounts. since I have some GL Accounts which does'nt have the cost center data, so in this case I have to write a ABAP code to allow this G/L accounts with cost center data.
So Let me know if anyone can help me how to write the ABAP code in the start routine.
Thanks
sekharHi,
Yopu can write the below lines of code adn try
SORT source_package BY Receive nr Type ASCENDING.
DELETE ADJACENT DUPLICATES FROM source_package COMPARING Receive nr Type.
But you should make sure which record of the either rows need to deleted
i.e in
F9001;LU;J001;662;
F9001;LU;J002;662
You need to decide to eliminate 1st or 2nd one.(depends on your requirement) -
How to write the start routine in the transformations ?
Hi Experts,
I am working on BI 7, As I want to write a start routine in transformations of 0FIGL_O02 DSO, to allow the GL accounts with cost center data. Already there is a delete statement please find.
*DELETE SOURCE_PACKAGE where BAL_FLAG = 'X'. I had made comment to allow the G/L accounts. since I have some GL Accounts which does'nt have the cost center data, so in this case I have to write a ABAP code to allow this G/L accounts with cost center data.
So Let me know if anyone can help me how to write the ABAP code in the start routine.
Thanks
sekharHi Experts,
I am working on BI 7, As I want to write a start routine in transformations of 0FIGL_O02 DSO, to allow the GL accounts with cost center data. Already there is a delete statement please find.
*DELETE SOURCE_PACKAGE where BAL_FLAG = 'X'. I had made comment to allow the G/L accounts. since I have some GL Accounts which does'nt have the cost center data, so in this case I have to write a ABAP code to allow this G/L accounts with cost center data.
So Let me know if anyone can help me how to write the ABAP code in the start routine.
Thanks
sekhar -
I just downloaded iTunes on my new PC and all the music that I have purchased through ITunes that was backed up on the cloud won't play. It is telling me I must authorize this computer before it can play pre purchased music. how do I authorize my computer to play this music?
Thank you for any assistance.Tigon's already got you covered here. But I'll chime in with some English localisation advice.
There's a couple of ways to get through to the authorisation controls in the 11.0.x versions.
The control is still in the Store menu, but first (if you're using iTunes versions 11.0.x) you might need to bring up the menu bar to see the Store menu.
If you're using 11.0.x, click on the wee boxy icon up in the top-left corner of your iTunes to see the "Show Menu Bar" control, as per the following screenshot:
Then you'll find the control in the Store menu:
Alternatively, if you don't want to bring up the menu bar, it's still possible to get into the authorise controls via nested menus accessible from the wee boxy icon. Here's a screenshot of where to find them: -
How do I make my computer the primary for my iPhone 3G?
How do I make my computer the primary for my iPhone 3G? I am able to load music from my iTunes library but unable to delete music or create playlists on the phone from itunes. The computer I set the phone up with (primary) was destroyed.
There is no "main" or " primary" account.
Iphone, ipod touch, ipad will sycn with one and only one computer at a time. Syncing to another will indeed erase the current content from the device and replace with content from the new computer.
Copy everything from the old computer or your backup copy of the old computer, to the new one.
Maybe you are looking for
-
Unable to install OS X update 10.9.5 updates via App store on MBP running Mavericks
Macbook Pro 13 (2012) 8GB of RAM, 512 GB SSD 2.9GHz Mavericks 10.9.4 When I click on the Appstore I see an OS X Update 10.9.5, Command Line Tools, and Digital Camera RAW Compatibility update 5.07. When I click Update for OS X Update 10.9.5 I get an
-
How can I copy and paste quoted emails from Apple Mail v4.5 into another application?
Hi, Having just moved from Entourage to Apple Mail on an Exchange back-end, everything is running smoothly except for one thing - when I copy emails that include quotes from replies (i.e. those coloured vertical lines down the left of the message) an
-
CC desktop app not displaying my installed apps?
My Creative Cloud desktop app is not displaying my list of installed applications? It is telling me that I have not installed any apps? This is a major concern as i will be missing out on updates to the apps I have installed as part of my CC membersh
-
I am using CFFORM. For my cfinput, how do I make the text boxes and/or checkboxes a different color. The form has a mixture of display (no changes) and entry fields and some users are complaning that they cannot see which fields to enter/edit, so I w
-
There used to be an option to make scrolling smooth in iPhoto, but since some update, it no longer exists. I dislike non-smooth scrolling because the events just jump up the page and it is difficult to follow them with a sensitive trackpad (which I p