HT201945 How do I use my time capsule on an existing WIFI network?

How do I use my Time Capsule on an existing WIFI network?

Use an Ethernet cable to connect from one of the LAN <--> ports on your existing wireless router to the WAN "O" port on the Time Capsule and then use the setup "wizard" on your Mac to configure the Time Capsule.
It will suggest that you set up the Time Capsule to create a new wireless network. If you don't want or need another wireless network, you can turn off the wireless function of the Time Capsule and use it as wired hard drive only.
Leave the Ethernet cable connected at all times. If you need to locate the Time Capsule in a different area, you can put it anywhere that the Ethernet cable will reach up to about 330 feet or 100 meters.
The only exception to using an Ethernet cable would be if your existing wireless network is provided by another Apple router. Then.....you would have the option to have the Time Capsule connect using wireless and extend the network, although using a wired connection would still be the better way to go in terms of performance.

Similar Messages

  • How do I use my Time Capsule with hotel wired internet

    How do I use my Time Capsule as a wireless router on my hotel free internet ethernet cable?

    It may not be possible..
    If they use a web access page, then there is no way you can set the TC to authenticate.. you must use the computer to authenticate and then use the computer to bridge to the TC for wireless clients to access.
    Look up instructions on using ICS (internet connection sharing) in the Mac.
    eg for 10.6.8 http://support.apple.com/kb/PH6589
    eg http://support.apple.com/kb/PH10740
    Of course if there is no login then you could just use it.. but I doubt you would be asking if it just worked.

  • How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?

    How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?

    unless i'm missing something, i think you got mixed up, this is easy google for walk throughs
    i'm assuming this is the new 3tb tc AC or 'tower' shape, if so, its wifi will run circles around your at&t device
    unplug the at&t box for a minute and plug it back in
    factory reset your tc - unplug it, hold down reset and keep holding while you plug it back in - only release reset when amber light flashes in 10-20s
    connect the tc to your at&t box via eth in the wan port, wait 1 minute, open airport utility look in 'other wifi devices' to setup the tc
    create a new wifi network (give it a different name than your at&t one) and put the tc in bridge mode (it may do this automatically for you, but you should double check) under the 'network' tab
    login to your at&t router and disable wifi on it
    add new clients to the new wifi network, and point your Macs to the time machine for backups

  • How can I use my time capsule with windows7

    How can I use my time capsule with windows7?

    This is asked regularly.
    https://discussions.apple.com/message/10978060#10978060
    Look at the more like this. On the right column next to the post.
    Load airport utility for windows.. which will also load bonjour for windows.
    In windows explorer type \\TCname or \\TCipaddress (replacing with the actual values.. names with spaces will give you trouble so change all names in the TC to SMB compatible or actual ip address).

  • How do i use my time capsule as a network to store files, etc.?

    How do i use my time capsule as a network to store files, etc.?

    There is no difference in setup..
    Only trouble.. be warned this is quite problematic. With Mavericks even more so.
    See Q3 here.
    http://pondini.org/TM/Time_Capsule.html
    Take particular note. The TC is not a NAS or file server.. it can be pressed into use as one.. but will suffer..
    1. Slow spin up of the disk and fast spin down. Causing streaming and library issues with itunes.
    2. iphoto is easily corrupted.. don't move it to a network drive at all.
    3. no backup.. the TC cannot back itself up.. it is designed as a backup target for Time Machine. but Time Machine cannot backup network drives.. and nor did apple build in a backup.. it was never needed. After all it is a backup.. not a file store.
    4. you cannot partition it. You will have issues with TM if you do store both data and TM backups on it.
    5. You can use USB drive plugged into the TC, and experience a new definition of pain and suffering.. well slow file transfer anyway.
    Good luck.

  • Can I use my Time Capsule to extend a current network? If so, How?

    Can I use my Time Capsule to extend a current network? If so, How?

    I want to use it wirelessly to extend the range of the network. I currently have an xfinity router as the main.
    You may not have understood what I was trying to say above.
    If you want the Time Capsule to extend wirelessly, then you must have an Apple router as your "main" router.
    You have an xfinity router. You cannot use the Time Capsule to extend the range of an xfinity router wirelessly.

  • How do i use a time capsule as a shared drive and back it up to another time capsule using time machine ??

    how do i use a time capsule as a shared drive and back it up to another time capsule using time machine ??

    You cannot backup network drives with Time Machine.
    You can simply setup the TC in the network.. it is a shared drive.

  • Can i use my time capsule to extend my wifi signal without physically connecting it to my router?

    I currently have a BT Homehub connected to a modem, which is connected to the ethernet port in my wall (which is downstairs). I bought a timecapsule to wirelessly back up my computer. It is connected via ethernet cable to my router. I have recently been having trouble getting a wifi signal in one room in my house (upstairs). To fix this i was wondering whether it is possible to move my time machine somewhere upstairs, to a location closer to this room, and have it transmit a wifi signal without it being connected to my router via ethernet. And if so how would i go about doing this?
    cheers
    jadidev

    Can i use my time capsule to extend my wifi signal without physically connecting it to my router?
    Yes, if you have an Apple router.
    No, if you have a BT router.
    IF....your Time Capsule is currently set up to provide a wireless network signal, you could add another Apple device...like an AirPort Express....to extend the Time Capsule wireless signal.

  • How can I set up a time capsule to extend my wifi network from a non-apple Medialink MWN-WAPR300N?

    I just purchased a new Medialink MWN-WAPR300N from Amazon to replace my old 2008 500 GB Time Capsule.
    I was wondering if it would be possible to use my old Time Capsule to extend the network from the Medialink router to the rooms in the back of my house. Would this be possible? How about if I use the Time Capsule as the primary point, and use the Medialink router to extend the network?
    Thanks!

    The Time Capsule would not be compatible with a Medialink product if you are thinking of trying to use the Time Capsule to extend the Medialink network using wireless only.
    The same would be true if the Time Capsule were the primary router, and you tried to use the Medialink product to extend the Time Capsule network wirelessly.
    If you can connect the two devices together using a permanent wired Ethernet connection, then you should be able to accomplish your goal.

  • Can I use my Time Capsule to set up multiple networks, or just one?

    Can I use my Time Capsule to set up multiple networks, or just one?  We'd like to offer the internet to clients who are at our studio, but don't want them able to access all our computers, so a second network for them would be useful.

    Two big IFs here.
    Not all versions of the Time Capsule have Guest Networking capability, so it might be a good idea to verify that first. Can you provide the model number of your Time Capsule.  it's on the bottom of the device.....starts with an "A" followed by four numbers.
    Next, assuming that the Time Capsule has Guest Network capability, the next requirement would be to verify that your modem is compatible with the Time Capsule for that feature. 
    Basically, you need a simple modem.....not a modem/router or gateway device that is often furnished by Internet Service Providers.  If you are not sure what you have, post back with the make and model number of your "modem" and we'll see if we can find some details ont he device.

  • How do I get a 1st generation time capsule to join a wifi network?

    OK, I've searched the groups but no luck.  Here's my situation;
    I'd like to configure a 1st generation time capsule to join a wifi network ideally with a printer attached to the USB.  My set up is an iMac running 10.9.3, Airport Utility 6.3.2 and a 1st Generation TC with the latest firmware (7.6.4).  I'm trying to connect it to an ADSL Wifi Modem/Router.  I know a cabled connection would give better performance but want a wifi only connection as the printer is in a different room.
    I've disabled the network functions (bridge mode) but I can only see wireless options to Create a Wireless Network, Extend a Wireless Network or Off, not to Join.  If I try to extend I get the option to add an SSID, security & passwords but it doesn't seem like parameters to join  -the drop-down doesn't list available networks to join & manually entering the main wifi network and password doesn't work.
    Is my desired config even possible?
    Dave

    Something.....a Mac or PC will need to have a 5.x version of AirPort Utility installed on the computer.
    Perform a factory default reset on the Time Capsule by powering it off for a few minutes. Then, hold in the reset button first and keep holding for an additional 10-12 seconds while you simultaneously plug the power back into the Time Capsule. Release the reset button after the hold period and allow a full minute for  the Time Capsule to restart to a slow, blinking amber light.
    Open up AirPort Utility on the computer, select the Time Capsule and click Manual Setup
    Click the Base Station tab below the row of icons to type in a device name and password that you want to use for the Time Capsule, set Time Zone, etc.
    Click the Wireless tab next to the Base Station tab
    Hold down the option or Alt key while you click on the Wireless Mode setting box
    Select the Join a wireless network setting
    Select the name of the wireless network
    Enter the password for the wireless network
    Verify the password
    Click Update to save the settings
    Note....everything here assumes that the router that provides the wireless network is using WPA2 Personal security, which is the default setting for the Time Capsule.

  • How do I use my Time Capsule to back up my wife's MacBook Pro running 10.4.

    I just installed a Time Capsule. I've extended the range with two Airport Expresses. I've connected my MacBook running 10.6.3 to the wireless network. I've connected my wife's MacBook Pro running 10.4.11 to it. I've connected my wife's 3G iPhone to it and my first gen iPhone to it and our Apple TV to it. All devices can connect to the internet. I've connected the Time Capsule to the printer and printed wirelessly from both computers.
    I've backed up my MacBook and seen that the Time Machine is backing up my MacBook as it should.
    How do use the Time Capsule to back up my wife's MacBook Pro running 10.4.11? I've tried connecting them via ethernet cable and via USB cable. In both cases the Time Capsule failed to show up as an external drive and wasn't seen by the 10.4.11 back up utility.
    How do people do this? (Other than convincing their wives to let them upgrade their MacBook Pro to 10.6.3?)

    James Elliott1 wrote:
    How do people do this? (Other than convincing their wives to let them upgrade their MacBook Pro to 10.6.3?)
    That really is your best option. Sooner or later, you're going to have a problem with the "other" data on your Time Capsule, since the backups of your Mac will, eventually, fill up all the available empty space. That will, of course, limit the space available for the other backups.
    There's a very cumbersome workaround in the blue box of #Q3 of the Using TIME MACHINE with a TIME CAPSULE *User Tip,* also at the top of this forum.
    Another is to connect a USB drive to the Time Capsule, partition it if desired, and back up one Mac to it and the other to the TC's internal drive.

  • How can I use my time capsule with Ethernet cable? How is it also possible to use time capsule as a normal external hard drive?

    My problem is that I don't know how to use my Time Capsule with Ethernet Cable, as when I use wireless it is really slow.

    Make sure that there is an Ethernet cable from one of the LAN <-> ports on your modem/wireless router to the WAN port on the Time Capsule
    Click on the Wireless tab at the top of the page
    Change the setting for Wireless Mode to Off (I assume that you do not want the Time Capsule to provide a wireless network since you already have a wireless network)
    Next, click the Internet icon at the top of the screen, then click the Internet Connection tab
    Connect Using = Ethernet
    Connection Sharing = Off (Bridge Mode)
    Click the Update button at the bottom and wait 30 seconds for the Time Capsule to restart and display a green light
    Then, you must power off your entire network...all devices....in any order that you want
    Wait a minute
    Start your modem/router first and let it run a minute
    Start the Time Capsule and let it run a minute
    Keep starting devices one at a time until everything is powered up
    If you are using Time Machine for backups, you will need to reset the connection because you have changed the way in which the Time Capsule connects to your network
    Open System Preferences (gear icon) on the dock
    Open Time Machine
    Click Select Disk
    Click the Time Capsule to highlight it
    Click Use for Backup or, it might be Use Disk
    Now you can connect your Mac using an Ethernet cable to one of the LAN <-> ports on the Time Capsule to back up using Ethernet. Be sure to turn off the wireless on your Mac before you start the backup.
    If you want to backup using wireless, disconnect the Ethernet cable from the Mac to the Time Capsule and turn on the wireless and connect to your wireless network. Your computer will now backup using wireless.

  • How do I use my time capsule as wifi for my xbox one?

    How does one setup a time capsule to use as a home network to allow Xbox one usage as well?

    set up the time capsule with an iOS device, a Mac or a PC, and then connect the Xbox to the time capsule like with any other router. however, for some Xbox features, you'll need to do specific setting changes. see this thread: Apparently I need to open several ports on my Airport Extreme to be able to chat on Xbox One.

  • How do I use my time capsule as a wifi extender and still use as a backup in Time Machine

    I purchased a new airport extreme and want to use my existing time capsule as a wifi extender in another part of the house.  How do I set this up so that I can still use the time capsule as my backup (time machine) hard drive?

    Hello BNOLTNER,
    Thanks for using Apple Support Communities.
    Please see the directions in the following article for configuring your extended network.  Your Time Capsule will still be seen on the network, and may still be used as a backup destination.
    Wi-Fi base stations: Setting up and configuring an extended wireless network (802.11n)
    http://support.apple.com/kb/HT4259
    Take care,
    Alex H.

Maybe you are looking for

  • How to create a verification pop-up message for queries executed on Web

    I have implemented the function RRMS_MESSAGE_HANDLING in my customer exit variable code for step 2  in the customer include ZXRSRU01.  I am able to get warning and error messages to appear in Bex Excel queries, but not queries executed on the Web.  I

  • Embedding youtube video in flash with as2 - problem with black bars

    I have successfully embedded the youtube video in my flash code with: //create area to put youtube video on screen this.createEmptyMovieClip("reason1_video", 10000); reason1_video._xscale = 60; reason1_video._yscale = 60; this.reason1_video.loadMovie

  • Converting Line item dimension to non line item dimension

    I have some BI 7.0 issues. For some of the existing cubes I had certain dimension as line item dimension  - I wanted to add some characteristic to these dimensions. I am able to do this change and activate the cube. But we noticed that the data which

  • Tab control list mode in vertical direction

    I know the default tab control is list in horizontal direction , if i set the tab location to "Left" , the tab text also change it to vertical , how can i set it stay in horizontal direction Message Edited by [email protected] on 01-02-2010 08:09 AM

  • Synch with iPad

    I cannot seem to download Firefox on my iPad. The information given is to synch with iPhone. I do not own an iPhone. Does this have to be synched with a desktop device to work on an iPad?