HT202076 Best configuration for AP Extreme express and Timecapsule

Hi I've an Airport Extreme which i bought last year in living room connected to BTHub5 Bt hub wireless is disabled as need the ports for hardwiring and is where the lead from the BT box connects to bringing in the internet The Extreme is set up to create a 5Ghz only network as were all Apple fanatics Ive a 2TB Apple Capsule in family room extending the net work and used for hardwiring tv audio etc in this room with an Apple airport express in this room to extending 5GHz network also have an Apple Express upstairs extending 5GHz network
Ive seen speed of 1035mbs from Extreme to capsule and 866mbs from Extreme to Mac
But recently I've seen adip in performance across my network and wondered what the best set up would be can't do a hardwired roaming network due to cables not being able to go through walls and wondered how best to optimize this set up ? Thanks in advance

The best set up is when the AirPorts have a line-of-sight relationship with each other.
You probably won't be able to attain that goal, but try to come as close as possible.
Other than moving the AirPorts closer to each other, that is all that you can do
The Extreme is set up to create a 5Ghz only network
That may be, but the AirPort Extreme is still broadcasting a 2.4 GHz signal, as are the other AirPorts that you have there.....and this band is much more likely to pick up interference that can slow things up a bit for devices on the 5 GHz network and even over Ethernet connections.
Unfortunately, you cannot turn off the 2.4 GHz signal, so not much that you can do other than keep cordless phones as far away from the AirPorts as possible.

Similar Messages

  • I will be buying the new IMac 27 inch in December. Would like input on the best configuration for photographic and possibly video processing-dream machine!

    I will be buying an IMac 27 inch in December. What is the best configuration for photo and possibly video processing.Does one need a Mac Pro? Dream machine!

    Just to explain what I just wrote to Laundry Bleach:
    Why is there no iDVD on my new Mac?
    https://discussions.apple.com/docs/DOC-3673
    UPDATE & ADDENDUM:
    But even though you can still buy iLife 11 that includes iDVD 7 from Amazon, Apple now make it difficult to install:
    Poster jhb21939 posted this in another thread:
    “when I attempted to load iDVD into a new iMac. A notice came up on the screen stating that the 'Authorisation Licence' had expired on 25 March this year (2012).
    I contacted the Apple support team and eventually, I was told that the Licence had been withdrawn and could no longer be used.”
    In other words Apple are now so adamant that we don’t use iDVD that they have tried to make it impossible to install.
    In response, Old Toad posted this solution:
    “You can still use it one all of your Macs.  If you get an invalid certificate message just set your Mac's clock to sometime before early 2011 and run the installer.  After you're done reset the time back to the correct time.” He added this comment:
    “It began after iDVD and iWeb were discontued and they were dropped from the Apple Store. All I can think of is the certificate was set to expire after a certain time period after the intitial iLife disc was released.
    I've been able to use the installer even without setting back the date.  I just clicked on the Continue button and it would work as expected.  For some it would not continue unless the date was set back.”
    The latest anorexic iMacs just announced do not even include a CD drive! Proof positive that Apple virtually prohibit the use of DVDs - although the newly announced Mac Minis do include a Superdrive.
    Yet, they still include iMovie! Heaven alone knows or understands what you are supposed to do with your newly edited masterpiece - except make a low quality version for YouTube?

  • Best configuration for maximum WiFi speed?

    Hello, I am trying to configure my network for the best WiFi speed. I have a Comcast/Xfiinity Modem/ Wireless Router (SMCD3GNV) with speed of 50 Mbps down and 10 Mbps up (acutally 87 down and 11.5 up last time tested) and 3 Airport Extremes, and a 16 port GB switch.  I am really confused about what should be plugged in to what and how to set up the Airport extemes for best WiFi speed for laptops, iphones and iPads etc. . I have a large house and want the WiFi to be available everywhere. Shoud I plug the Modem/Router and the first Airport extreme into the switch and then set up the other 2 Airport extremes as extended networks, or should I plug all the Airports into the switch, or should I plug just the first Airport into the switch and then connected the other 2 Airports into the 1st?  Like I said I am really confused. Any help you can offer would be appreciated.
    Thanks in advance,
    Vic

    For the best configuration for maximum WiFi speed, connect all your Extremes to the switch.
    The effective range of your wireless network will be a function of the distances the Extremes are from one another. Each will be limited by Ethernet specification to a maximum distance 100m from the switch or adjacent Extreme.
    This picture may help:
    From Wi-Fi base stations: Extending the range of your wireless network by adding additional Wi-Fi base stations

  • HT5022 i cannot install airport utility 5.6 onto my computer although i need it to configure an older airport express and base station

    i cannot install airport utility 5.6 onto my computer although i need it to configure an older airport express and base station

    Here is my method.. the software is free that is required.. always a good point.
    How to load 5.6 into ML.
    1. Download 5.6 for Lion.
    http://support.apple.com/kb/DL1482
    Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
    2. Download and install unpkg.
    http://www.timdoug.com/unpkg/
    Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
    You cannot uninstall 6.1 so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.
    For screen shots see this post.
    https://discussions.apple.com/thread/4668746?tstart=0

  • IDoc Configuration for Production Order Creation and Change

    Hi All,
    Please Help me out for IDoc Configuration for Production Order Creation and Change
    I have found the IDoc for Production Order
    Messgae Type : LOIPRO and IDoc type : LOIPRO01
    Actually my requirment is to send the (LOIPRO01 )IDoc from SAP R/3 to XI system ,when ever the Production Order Created and Changed,
    I have done following Configurations:
    1. RFC Destination created for XI system
    2. PORT was created for XI
    3. Partner profile created WE20 and LOIPRO01 IDoc is added in OutBound Perameter.
    I need to know how to do the followning.
    1. How do i configure the outbound Production order idocs when Production Order is created or changed.
    2. in NACE (Output control) which is the Application for Production Order.
    3. How can I set IDoc as output Type for Production Order Creation.
    Thanks in advance
    Dhanabal T

    Hi Michal,
    I know that it is the old thread but still want to get clarified from you out of curiosity.
    Unlike other IDOC, i actiavated change pointers for LOIPRO
    1.message and idoc type is linked
    2.function module , message type , idoc type is linked
    function module used is CLOI_MASTERIDOC_CREATE_LOIPRO
    3.BD64, distribution model is created and distributed
    4. port and partner profile is in place.
    5. IDOC is not getting generated after creating the process order.
    do we need to activate the change documents for the message type in BD52,
    if yes can you please provide the object types for the same.
    or i am missing something else. please guide me in this regards.
    Thanks in advance for your time.
    S.Janagar

  • What is the best subscription for use in US and Au...

    I regularly travel between US and Australia.  I have postal addresses in both locations and credit cards from both countries.  So I can purchase from either location.
    I want to be able to make calls to US land lines and Mobiles whilst in either countries.  What is the best subscription for me to buy and in which country should I purchase it?
    NOTE: I am not really concerned about calls to Australia.  I don't make that many and so am happy to pay as I go for the Australian calls.

    Probably best option would be Unlimited US&Canada subscription, which you can get if you are located in US.
    It will be displayed here: http://www.skype.com/go/subscriptions
    If you are outside of US or Canada then this subscription is not offered.
    It doesn't matter where you are located when placing calls, but with subscriptions it does matter where you are when purchasing.
    Andre
    If answer was helpful please mark it with Kudos and if issue is resolved mark it with solution. This will help other users find this answer more easily. Thanks in advance!

  • Re: Best options for exporting a sequence and making a DVD

    I using iPad 2.

    "Re: Best options for exporting a sequence and making a DVD" and "I'm using iPad 2" and "My phone number is not verified!" don't seem to be entirely related. Can you please restate your question?

  • Best cover for an ipad mini and do you need a keyboard?

    best cover for an ipad mini and do you need a keyboard?

    If the iPad is unopened, and in the original box, then it comes with the full warranty. However, if it is used, and comes with an original box, it may or may not have the original warranty; if there's still some warranty left, the original seller should have transferred the warranty to you. 
    Read this:
    http://support.apple.com/kb/HT5693?viewlocale=en_US&locale=en_US
    The only way you can add to your warranty is by extending an Applecare contract.

  • US Airport Express and TimeCapsule with EU firmware

    Last month I bought Airport Express and TimeCapsule in the US. However, I life in the EU and want to upload the EU firmware to it because of the radio channels 12 and 13 which we can use in the EU.
    Is it possible to flash the US models with EU firmware? If so, where can I get the EU firmware files?

    I think that you will find that the answer is that this is not possible.

  • Best configuration for Time Capsule & Airport Extreme running one wireless network?

    We just moved to a house that does not have Ethernet pre-wired so I've had to re-setup the wireless network in a different configuration and it seems we're experiencing deteriorated wireless signal for devices like laptops.  It will work perfectly fine (and fast! wheee!!!) but then it will slow to a crawl and mostly timeout.  before I reset everything and start from scratch, I'd like some help.  As an FYI, when connected via Ethernet to either of these, Internet is blazingly fast… so my problem here is the Wireless portion. 
    As some background, here is how we had the network set up in the previous house which was working great (although it was wired for Ethernet which made things A LOT easier):
    Airport Extreme (4th Generation)
    Wireless Mode: Create a Wireless Network
    Internet Facing (Connected to the Cable Modem)
    Location: Upstairs Utility Closet (with Smartbox and cable modem)
    Time Capsule (1st Generation)
    Wireless Mode: Extend a Wireless Network
    Joined to existing network above, but also connected to the Ethernet jack
    Location: Upstairs Office
    Here is the current set up we have running:
    Time Capsule (1st Generation)
    Wireless Mode: Create a Wireless Network
    Internet Facing (Connected to the Cable Modem)
    Radio Mode: 802.11n (b/g compatible)
    Location: Upstairs Office
    Airport Extreme (4th Generation)
    Wireless Mode: Extend a Wireless Network
    Joined to existing network above with NO incoming Ethernet connection
    Location: Downstairs Family Room
    My understanding is that the Airport Extreme should pick up and relay the signal downstairs, as well as provide the router for the devices downstairs that need Ethernet (TiVo, Apple TV, etc).
    So, my question is (and thank you in advance for helping me sort this out!), what would be the best configuration to optimize the Wireless performance in the house? 
    Also, for whichever device is the one picking up the existing network and providing the router capabilities for the Tivo and such, is it possible for it to pick up but not rebroadcast the signal?  I think in this new house we may have a good enough signal from the office, without the need to rebroadcast it.  My theory is that in this house, they are too close together and interfere with each other and/or devices aren't sure which to choose so they bounce back and forth endlessly.  Again, just a theory.
    Many thanks again for your help! If I've left out any information, please ask and I can provide. 

    Should they be running on the same channel (as with the "Extend" option previously? Or just both on Automatic channels?
    I would recommend the Automatic setting on both devices because this will allow each router to scan and choose an open channel automatically. If  you want to set the channels manually, keep them separated by at least 4-5 channels. You would not want to ever use the same channel for both devices in this type of "roaming" setup.
    Is there a way to limit bandwidth per device (or action) so that it doesn't monopolize the network and keep other devices from using it?
    Nothing that I am aware of. It sounds like  you have some young users who are likely visiting Bit Torrent sites, which will really gobble up the bandwidth with big, heavy downloads. The Time Machine has to back up the same files again when it makes the next pass, so that clogs things up again.
    Backups would go 3-5 times faster, on average, if the computer(s) could connect using Ethernet, but I understand that wires are not cool with the younger crowd.
    should BOTH the TC and AE be set up in Bridge mode?
    The AirPort Extreme should be set up in Bridge Mode.
    The Time Capsule...it depends. If the TC is connected to a simple cable modem...then the correct setting for Connection Sharing would be "Share a public IP address" on the TC. That is because a simple modem has only 1 IP address to deliver. The TC takes that address and "shares" it with other devices by setting up a local network for all your other devices.
    If the TC is connected to a gateway....a combination modem/router in the same box that usually has 3-4 Ethernet ports on the device....then that device would be considered the main router on the network and the TC would be  configured in Bridge Mode in that case to function correctly on the network.

  • Adding second 5508 Wireless Controller, how to best configure for load balancing and redundancy?

    We recently purchased a second 5508 wireless controller (both licensed for 100+ AP's).  What is the easiest way to configure and add the second controller so I can split the load between the 2 controllers and provide failover capability?  I do not want to run in an active/standby mode since that will effectively cut our AP capacity by half even with both controllers running. 
    Should I just manually configure the new controller (long and drawn out process to configure all the parameters), backup the current controller configuration and import to the second controller (then change the ip address) or is their an easier way to cause the two controllers to synchronize the configurations? 
    We are currently running 7.0.240.0 on our active controller and I would rather not upgrade it until we get the new controller online so I can have less downtime and fail AP's between controllers.
    What can you recommend? 
    Jim

    I'm assuming then, when I update the software on the controllers I won't be able to choose which controller is primary for an AP anymore and will lose access to the 100 AP licenses (and the capability to have 100 AP's registered, 100 licenses on each Controller).
    Read the Deployment Guide.  It should mention that you can choose which controller is the "primary" and which one is the "secondary".
    If I'm not concerned about quick failover can I still assign a primary and secondary controller for each AP and utilize all 200 AP licenses that are split between the 2 controllers?
    You sure can.  But this "old school" method is a very expensive method.  Why?  Because this means that you have two controllers with similar AP licenses.  The newer AP SSO means one controller has a full license and the other has only an HA SSO license, which is a lot cheaper.

  • Best Practices for Using Airport Express to Stream iTunes via Ethernet

    So I've been reading various posts about using Airport Express to stream iTunes and I've been reading various posts about using the Ethernet port on the Express. However, not sure I've yet found an inclusive listing of settings for both. Wondering if anyone out there has such a thing?
    I have an (older) Aiport Express (802.11g, no 'n') running the latest Firmware (6.3, I believe). I have it lashed into my switch via a Cat 6 cable and the 3.5 stereo mini running out to RCA jacks into my RussSound (home audio system) amp. I'd like to make the Express ONLY a iTunes streaming device getting its network link over Ethernet (AirTunes). So, what does everyone suggest for best settings for turning on the Ethernet, turning off the WiFi and running AirTunes?
    Thanks much in advance!
    cheers
    cp root

    Airport > Wireless > Wireless mode "off"
    Internet > Internet connection > Connect using "Ethernet", Configure IPv4 "via DHCP"
    Music > Enable Airtunes
    Enable Airtunes over Ethernet (if this choice appears).
    When I first did this, the remote speakers didn't appear in iTunes. I poked around to see what I missed and couldn't find anything wrong, but the next time I ran iTunes the remote speakers appeared.
    If you run into a firewall problem, make sure your OS X firewall is configured to "set access for specific services and applications": http://docs.info.apple.com/article.html?path=Mac/10.5/en/18503.html
    Firmware 6.3 is correct for your Express.

  • Best Configuration for running adobe Premiere Pro CS3

    I have a 4 HDD system and the ability to run RAID.  What is the best configuration to run Adobe premier pro CS3.  I want to be able to get the best perfomance out of my system.

    Is it possible to run different RAID combination using the same controller card?
    For example:
    1) 2 HDDs, RAID 0 configuration for Operating System/Programs
    2) 2 HDDs, RAID 0 configuration for Project/Scratch Disk/Paging
    3) 2 HDDs, RAID 0 configuration for Media/data.
    I have a Asus Striker Extreme Motherboard.

  • DSL Modem / Router for Airport Extreme / Express

    Please can anyone advise re the best DSL Modem / Router to use with an Airport Extreme and Express.
    I am in the UK with BT Broadband. I currently have a Netgear DG834G which has been great but seems to need a lot of re-setting recently and has been dropping the connection. I've checked our line with the provider and that seems to be OK. The Netgear DG834G is currently wired via CAT5 to my Airport Extreme which is then also wired to an Airport Express to extend the network.
    We are in a rural area so don't have particularly fast Broadband speeds (max tends to be around 4MBps).
    As I'm using the Airport Express / Airport Extreme for my WiFi I don't necessarily need a modem / router with wireless or anything that has bells and whistles or can make me a decaf macchiato...I just want something this is bomb-proof and super reliable.
    I've looked at various forums and am just getting confusing stuff re what works and what doesn't.
    We are due to get fibre-broadband in our area next year - very happy to have to get a new router then for that if needed. The important thing for me is to have a decent set-up for now.
    Many thanks! Eddy
    Using Macbook Pro and iMac on 10.9.5

    You don't need a modem/router since the AirPort Extreme is a router.
    I don't know what the best modem might be....that would involve testing hundreds of products, and even if we could come up with a "best" modem for the AirPorts, it would likely not be the "best" working the BT connection, or BT would not support the product......,but you might want to take a look at the Draytek Vigor 120 modem, and then check with both the Draytek support folks and the BT support folks to make sure that the modem will be compatible with your service.
    Vigor 120 ADSL Modem - Draytek
    If you are due to get a fibre connection in the future, then you will have to start over again modem wise at that time.

  • Best Configuration for Laptop

    I just purchased, and upgraded, a laptop that has:
    GTX 470 (3 GB dedicated video)
    24 GB DDR3 RAM
    120 GB primary internal SSD (C Drive) (up to 550MB/s read, up to 500MB/s Write)
    480 GB second internal SSD (D Drive) (up to 540MB/s read, up to 460MB/s write)
    i7 processor
    I shoot with 3 Sony HDR CX550V's. They of course compress to H.264...
    So, what is the best way to setup this laptop? Basically, I installed the OS and software on the primary drive. Then I opened up premiere and created a blank project and setup "Media" and "media cache" under project settings to store in a folder on the D drive. I assume I don't want anything on the primary drive, no cache, no renders, just keep it clean.
    But the C drive is faster and I would like your professional, experience opinion as to how to best configure this. Should I render out to the C since it has faster write? Should I store cache on C in a folder that I clean out every now and then? Data files on D? etc...
    This laptop has a thunderbolt port too, and 4 USB3.0, it's an Asus laptop. I have an external drive, but it's RDD, 7200 RPM's. I could get an external SSD but for the most part I don't want to use an external drive in my workflow. However, for bigger projects if there's a major advantage I may need or at least want to do that. So, suggestions for this scenario would be appreciated too, but mostly curious about the best way to deal with my internal drives. I am curious if there would be a big difference expected with an external drive(s) in the mix...

    Also, please be specific, like where to put what:
    Project (premiere project files)
    Scratch (video/audio previews)
    Source files, my H.264 files that is)
    Exports (Renders)
    "Media Cache Files" and "Media Cache Database" under preferences/media
    And anything else specific that would be helpful to know.
    Thanks!

Maybe you are looking for

  • Print Program - Export Packing List/Export Invoice Form

    Hi friends, I've to create two new smartforms for the above said subject and assign the same in output control as a new output type instead of Script. Im in ECC 6.0 version and in NACE->Billing,i've the std output control(FUEP) in form of script as "

  • Hotmail will not open messages in FF 3 or 5 or 6 since Aug 2011 - Hotmail works in IE

    Hotmail will open to the inbox page but none of the folder links or message links will work. No error messages, just no action. like all the links are disabled. The top menu items are active and work if pressed, just not the folders or messages

  • Loading existing Iweb with new operating system

    I just updated our computer with a new hardrive (old one crashed) and updated to snow leoapord, cant reload the existing Iweb to open up on our computer, I have the Iweb program loaded, cant get in to make changes to our site.

  • Problem with 0009 bank details infotype....

    Hi Experts, I am updataing the bank account number.Even though i created the new record ,the system is showing the previous record s enddate as 31.12.9999.My new account numbers are updated from 01.02.2008.How should my record delimts the end date as

  • Querying CGPL_HIERARCHY using RFC_READ_TABLE

    Hi, Does anyone has any idea how this could be done? It seems CGPL_HIERARCHY.GUID is a RAW data type and when using RFC_READ_TABLE and providing a where clause - GUID EQ '5D29E4460A487750' (as an example) doesn't yield any result , when the fact is t