HT202157 My Apple TV keeps rebooting after it did the up date

My Apple TV keeps rebooting after the new roads were down down

The update didn't apply correctly, you will need to restore
Restore your Apple TV (2nd and 3rd generation) - Apple Support

Similar Messages

  • Iphone keeps rebooting after slide to power down?

    Help! My 4S iphone keeps rebooting after slide to power down?

    iPhone 4s.
    iOS 5.1.1
    When USP charging cable is connected to both the live wall charger and iphone,
    the iPhone will succesfully 'Slide to Power Off'.
    When the USB cable is not connected the following:
    1. Hold down power button until "Slide to power off appears".
    2. Slide the slider.
    3. Iphone gets the spinny wheel.
    4. Screen goes dark for a second.
    5. Apple logo then appears and the iphone eventually turns back on.
    6. No Apps are installed on this 4S.
    7. Restored on iTunes several times, No change.
    8. Changed USB Cable, No change.
    9. Cleaned Connector port w/ brand new, Clean, soft tootbrush, No change.
    10. Blown clean air into the connetor, No change.
    Any New developments / suggestions?????????????

  • Apple TV keeps rebooting

    I recently updated to Software Version 2.4, and the Apple TV keeps rebooting. Specifically- when viewing anything from the iTunes Store. This is problematic because when the system starts up, poster art from the iTunes store launches behind the menu, causing the system to restart. The poster art actually never loads, but shows the grayed-out tickets. My only work-around is to unplug ethernet from the device, let it boot, move to a screen that doesn't show iTunes Store content, and then plug the ethernet cable back in. If I attempt to back into the iTunes store, say from the TV Shows> Top TV Shows, it reboots, and keeps doing so until I unplug ethernet. Content, synced or streamed, purchased or self-encoded plays back fine.
    An unrelated problem is slow menus and menu flickering. When going back and forth to say, My Music> Playlists> My Playlist, it is now taking the Apple TV a much longer to catch up. Sometimes, especially when the playlist or list of TV Shows is long, the names of the shows or songs flicker.
    Thanks for any suggestions.

    Tried factory restore (which takes it back to v1.0). Everything works as v1.0 (trailers, etc). Can still sync and stream. Upon updating to v2.4, it restarts once the Apple TV tries to get into the iTunes store. Still syncs and streams, AirTunes, YouTube and Flickr work, it's just when I try to access the iTunes Store (Top Movies, Top TVShows, Top Music, etc) that it restarts. It doesn't do a full reboot, it just shows the White Apple, brings up the menu, then loads the grayed-out movie tickets in the background, then restarts again.
    I have actually tried Factory Restore several times, and each time that 2.4 is loaded and the restart happens the first time, a diagnostics dialog appears and asks me if I want to notify Apple.
    I have reset the my network, and have tried wired (which is normally connected) and wireless, and have tried syncing to another Mac, all of which end in the same result.

  • My Apple TV keeps rebooting itself

    My Apple TV keeps rebooting itself no matter what app I am using. It cycles off the wife led blinks and it goes back to the homescreen. It's been doing it for a few weeks now.

    Restore
    Apple TV (2nd and 3rd generation): Restoring your Apple TV - Apple Support

  • Mac keeps rebooting when it reaches the grey window with the apple

    Hello,
    My Mac G5 keeps rebooting, it cannot reach the desktop.
    Yesturday, I changed the read write options on the macintosh hd (I put everyone on read write so others on the network could get access to all the files, I pressed on the wheel on the botton and "replicated" to all files in the hd).
    When I restarted the system, it hasn't booted to the desktop since.
    Is this what caused the problem???
    How can I fix this?
    I tried the utility from the install dvd to repair the rights, but it does not work, if I scan again, I get a very long list containing mainly files from the library folder.
    Thanks

    Michael.Pasteris wrote:
    Hello,
    My Mac G5 keeps rebooting, it cannot reach the desktop.
    Yesturday, I changed the read write options on the macintosh hd (I put everyone on read write so others on the network could get access to all the files, I pressed on the wheel on the botton and "replicated" to all files in the hd).
    doing this completely killed your system. you now have no choice but to do an archive and install.
    http://support.apple.com/kb/HT1710?viewlocale=en_US
    you should NEVER use "apply to enclosed items" button on ANY system created folders or on the startup drive. that includes btw such things as your Desktop folder, your home folder etc.
    and you shouldn't even try having your whole drive read+write by everybody. that's very bad from security point of view and other users have no business having read+write access to your entire system. make a folder shared and give them read+write access to that.
    When I restarted the system, it hasn't booted to the desktop since.
    Is this what caused the problem???
    How can I fix this?
    I tried the utility from the install dvd to repair the rights, but it does not work, if I scan again, I get a very long list containing mainly files from the library folder.
    Thanks

  • I imported about 300 RAW images yesterday and worked with them for about an hour. iPhoto locked up on me and I rebooted. After I did the event icon is now gray and it says there are no photos. I know the photos are there. Any idea how I can recover them?

    I imported about 300 RAW images yesterday and worked with them for about an hour. iPhoto locked up on me and I rebooted. After I did the event icon for that event is now gray and it says there are no photos. I know the photos are there. Any idea how I can recover them?

    a best practice to is to never have any computer program (including iPhoto) delete the photos from the card but to import the photos and keep them and then after at least one successful backup cycle has completed and then reformat the card --  I use three very large (32 GB) cards in rotation so I do not reformat for typically a year or more giving me one more long term backup of my photos
    Back up your iPhoto library, Depress and hold the option (alt) and command keys and launch iPhoto - rebuild your iPhoto library database
    LN

  • Kernel panic keeps happening even after I did the factory reset. any suggestions ?

    kernel panic keeps happening even after I did the factory reset. any suggestions ?

        Hi Hallry,
    Let's free your device! It's important to have a properly working device. Have you attempted an alternate Hard Reset on the device http://vz.to/19r2DOO? If the alternate Hard Reset does not work, then the device would need to be replaced. How long have you had this device? Any liquid or physical damage to the device? Keep me posted
    Thanks,
    PamelaF_VZW
    Tweet us @vzwsupport

  • So, my girlfriends old apple ID keeps popping up asking for the password. I have changed my apple ID and my Itunes ID and it still pops up. what do I do?I cant download some of my apps because of it

    so, my girlfriends old apple ID keeps popping up asking for the password. I have changed my apple ID and my Itunes ID and it still pops up. what do I do?I cant download some of my apps because of it

    If you have any apps downloaded with the other AppleID, those apps
    will ask for the other AppleID to update.
    Downloads are forever tied to the AppleID used to download them.
    Delete the apps associated with the unwanted ID and download them
    under your ID. You will have to purchase apps that are not free.
    You cannot transfer apps from one Apple ID to another, not can you
    merge 2 Apple IDs.

  • My iphone 4 keeps restarting after i changed the battery

    my iphone 4 keeps restarting after i changed the battery and its every few minutes please help!

    my iphone 4 keeps restarting after i changed the battery and its every few minutes please help!

  • How do I restore the contacts in my IPhone?  They dissappeared after I did the update.

    After I did the update, my contacts comletely dissappeared and my email locked up. Any help would be appreciated. I contacted Apple, but they were not of much help. The Icloud was not of help either.

    Do you have sync contacts with the Address Book on your Mac selected under the Info tab for your iPhone sync preferences with iTunes?
    If not, this needs to be selected.
    If you want to replace contacts on your iPhone with what is available in the Address Book on your Mac, select Contacts for replace info on this iPhone under the Info tab for your iPhone sync preferences followed by a sync.

  • My IPhone stopped working right after I did the most current update, yesterday.  The screen has a picture of the usb cord, pointing towards the ITunes logo. I cannot use the phone at all.  I have tried turning it off and on.ITunes won't recognize device

    Hi there,
    Can someone please help.  My IPhoneS stopped working right after I did the latest update which was yesterday.  Now, the phone does not work at all.  When turned on, the screen shows a picture of USB cable pointing to the ITunes logo.  I have tried just about everything, and cannot get it working. It's like it is frozon.  My ITunes does not recognize my device.  Cannot dial out either. I desperately need to get it working.  Can someone please help me. 
    Thanking you in advance for your help.  :-)

    The update did not do anything.
    AT&T cannot and will not do anything, they do not provide support for iPhones, Apple does.
    The issue is not with the iPhone or iOS if you've reset network settings and tried forgetting the Wi-Fi Network, it is specific to the network.
    Check the settings on the router, try disabling the security settings first... that will clarify the issue is not with the device but rather the Network.

  • HT1454 why i can not get video out from my ipod touch after i did the upgrade

    why i can not get video out from my ipod touch after i did the upgrade

    why i can not get video out from my ipod touch after i did the upgrade

  • My Itunes store wont open after I did the update on my Iphone.

    I cant get itunes store to open now after i did the update?

    thank you very much for solving my problem, im just used to clicking on the link all the time, but as long as i can open the page thats ok, thanks again

  • After I did the update it deleted my phone contacts :( trying to restore but itunes only has memory of last restore yesterday when update was done.smhh

    After I did the update it deleted my phone contacts trying to restore but itunes only has memory of last restore yesterday when update was done.smhh

    Yes all contacts checked  and getting pop up message that says "your contacts, calendars,& bookmarks are being synced with ICloud over the air, so it isn't necessary to synch these items using itunes. icloud sync can be configured using your devices mail, contacts & calendar settings".
    I have that setting as referenced above  and only contacts showing are the 9 contacts I renetered manually today after losing all 3oo contacts. I then restored my iphone back to orinail and still no contacts. Please help

  • The computer recently ask me for an update for mavericks and after i did the update there a white smug in the middle of the screen. how can i fix this?

    the computer recently ask me for an update for mavericks and after i did the update there a white smug in the middle of the screen. how can i fix this?

    smug?

Maybe you are looking for

  • Dbca problem on rh 7.2 and 7.3 with Oracle 9.2

    hi! i have problems using dbca on my redhat 7.2 and redhat 7.3 machine with fresh installed oracle 9i release2. installation succeded with no problems, but now i have problem creating database with dbca. however, when i type dbca & as user oracle, i

  • How to make the location of an iPhone that was stolen?

    how to make the location of an iPhone that was stolen?

  • Error code 0x8002006e burn issue

    Hi, I have read all the threads on this issue and no answer. Apparently this is happening a lot. I have burned one cd-r that worked on my new mac pro, (month old) and now I cannot burn anymore without the error code 0x8002006e unable to verify. I can

  • Report preview

    I want to see a preview of a report generation inside of labview without writing it to a file. So I just want to display the report on for example a front panel. Does anyone knows an answer on this?

  • Regarding Forwarding Agent

    Hello Friends, In VL02N transaction going to the Header part, we have a PARTNER tab. So for a particular delivery if there is no 'Forwarding Agent' in the PARTNER tab, it should assign the Forwarding Agent from the drop down option and even fill the