HT202157 Why does my apple TV say it needs hdcp compatibility.  It never said that before.  Now my apple tv is not working.

Why does my apple TV say it needs hdcp compatibility.  It never said that before.  Now my apple tv is not working.

Hello Rickpoulette,
The following article provides further information and could very well help get your Apple TV and your television cooperating again.
If HDCP authentication does not succeed, you may see one of the following symptoms:
A message may appear on your television stating "This content requires HDCP for playback. HDCP isn't supported by your HDMI connection."
You may see periodic bands of static, or full screen static, flashing across your TV screen.
If you are experiencing either of the symptoms above, try playing the same content again for at least another 10 seconds. If the issue persists, try the following steps until the issue is resolved:
Connect your Apple TV (2nd generation) directly to your HDTV using an HDMI cable.
Set your Apple TV and HDTV to off or sleep mode
From the Apple TV interface, select: Settings -> Sleep Now.
Turn off your TV and wait for about 10 seconds.
Turn your TV back on.
Press the Select button on your Apple TV remote to wake your Apple TV.
Some HDTVs may need a firmware update. Consult your TV manufacturer's user manual or online support pages for additional information about how to update your TV's firmware.
If available, try using a different HDMI to HDMI cable, such as an Apple HDMI to HDMI cable, directly between your Apple TV (2nd generation) and 720p HDCP-compatible HDTV.
Apple TV (2nd generation): About Apple TV and HDCP
http://support.apple.com/kb/HT4428
Cheers,
Allen

Similar Messages

  • Why does my Airport Express say "self assigned IP address"?  No IP address for the ethernet, and it is not connecting to my cable router any longer...

    Why does my Airport Express say "self assigned IP address"?  No IP address for the ethernet, and it is not connecting to my cable router any longer...

    Some cable providers.....like mine, a well known company......seem to take anywhere from a few moments to sometimes up to 30 minutes to allow their equipment back at the cable company to fully reset and issue a new fresh connection.
    So, it would not hurt to leave things powered down for 15-20 minutes or more when you perform the reset that John Galt suggests.

  • Why does premiere elements 8 say I need the right 'codec' when trying to open hdd video?

    Why does premiere elements 8 say I need the right 'codec' when trying to open hdd video?  where can I find this codec?

    hey, I'm not sure if I've set it up for hard drive video.  When I
    try to import it says it's the wrong codec.  I had a similar problem with windows moviemaker.
    except the error message there (moviemaker) said 'too many methods firing from events'
      hmmm.  I don't know what it all means.  I have an hdd sony digital handycam.
    dcr-sr45 is the model.  any suggestions?

  • Why does my apple shuffle dock not read by my computer

    why does my apple shuffle dock not being read by my computer

    Are the connections on each end nice and snug?  Has this Shuffle ever previously worked with this PC or this the first time you have tried connecting it?
    It worked previously, can you think of anything on the PC that might have changed since the last time the Shuffle was able to successfully connect? Could be something such as an update to an application or the installation of some new software.
    Does the device charge when it is connected?  Do you get any status from the LED indicators when plugged in?  Does the Shuffle otherwise function as expected?
    B-rock

  • Why is my apple ID password not working on ipad2 after updating to iOS6?

    Why is my apple ID password not working after upgrading to iOS6?

    Who knows?
    Settings>iTunes and App Stores>Tap your ID and sign out. Reboot your iPad.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    Go back to the settings and sign back in again and see of it works now.
    If it doesn't work, post back with some information that might help us help you. Describe what you are doing in some detail and it might let us better understand why this is happening.

  • I just buy operativesystem onlocker from 3 webshop i got the mail and it says i need to but it on itunes i do the all  steps but its not working its lockt to 3!

    i just buy operativesystem onlocker from 3 webshop i got the mail and it says i need to but it on itunes i do the all  steps but its not working its lockt to 3!

    sorry my english is very cash I think we got the paper on the lock operator and we have done all the steps but it will not play if it is unlocked, bought locked to three paid 350kr

  • Why does my apple I'd not verify my email address when I try to sign in to iMessage?

    Why does my apple ID not verify my email address when I try to sign into iMessage

    It's a commun problem with IOS 6 and it depends in which country you are trying to activate the iMessage maybe it's blocked from the goverment ...

  • Why Does My Apple Time Capsule , not share ethernet when connected to my current network?

    Hello
    Thank You for taking the time to look at this , my apple time capsule will not share ethernet when joined to my current network , the only way i can get the ethernet ports working is connecting a ethernet port from my airport express to my time capsule and that enables the ethernet ports (which is fine)
    So I'm Wondering Why This Works
    My Current Set up is
    Netgear Router Downstairs (Main Router)
    Apple Airport Express upstairs (set to join existing network)
    Belkin 8 Port Network Switch ( Ethernet cable from express to switch) (3 other devices connected to switch as well)
    Time Capsule upstairs (cable running from switch to time capsules wan port)
    Hey Presto
    So I'm wondering why i have to go around the houses to allow these 3 ethernet ports on the time capsule to work

    Because Apple decided it should be so.. and it was!
    The Airport Express can join a wireless network (non-apple) and still keep the ethernet port alive.
    When Airport Extreme or TC join a non-apple wireless network, they shut off the ethernet ports.
    It was a decree from on high.. there is some technical stuff about MAC addresses hidden behind the router.. but it also makes people have to buy another router they don't actually need.. hence good for the Apple bottom line. And what Apple deems is good for it.. is plainly good for you.. !!
    The solution is to use the airport express downstairs.. plugged into your netgear router.. and tick allow extend network.. and set the TC upstairs to extend a wireless network. In this mode the TC will keep the ethernet active.
    Isn't it fun when you have Apple working hard to close the loop.

  • Why does my apple tv 2 not update to v5.0?

    Hello!
    I´m new - my englisch is not the best but i will try to explain. I want to upadte my "apple tv 2" with the new released Version (5.0). I tried it since 5 days, but my "apple tv 2" won´t find the new version although i can read that there is a new update available. The Wifi-Network works good, it´s possible to watch filmtrailers and other content. When i try to start the update, there is the "normal" load optic, but it will not start and it failed. After two minutes it stopped and i should try again later.
    I´m thinking to update with itunes (usb connection from pc to apple tv), but i don´t really know, how that works. Meanwhile i found the newest "apple tv"-software and i have this new version on my pc.
    Who can help me ???
    Thanks in advance
    rommi2

    Hello Damian!
    Thank´s for your helping answer!
    Let me ask some more questions for better understanding:
    Is there a difference to load the new software with usb / Itunes ? Will Itunes find automatically the new apple TV update 5.0 (we talk about the latest and newest update with the different user surface)
    If "my" itunes won´t find the new software update, is the are chance or possibility to install the downloaded version, which i found in the internet. It is the version 1_5.0_9B179b_Restore.ipsw (487 MB size)? How will i get this version into Itunes?
    Maybe you can answer my new questions.
    Thank you once again for your efforts.
    rommi2

  • Why does my mac air say I need to install Microsoft silverlight and adobe?

    I've installed it like ten times but still won't work. I restarted my computer and everything. I am trying to install it due to Netflix and hulu requiring it.

    Welcome to Apple Discussions
    All System Updates Current?
    Download Silverlight. QUIT ALL BROWSERS mount/open Silverlight.
    Install - After install
    run Disk Utility DiskFirstAid: repair permissions (a good practice to follow after any install update).
    Restart
    Now open browser (what browser are you using)? If Safari:
    From your Safari menu bar click Safari > Preferences then select the Advanced tab.
    Select:  Show Develop menu in menu bar
    Now from the menu bar click Develop >  Empty Caches
    Visit Netflix

  • Why do my Apple Earpod Microphones not work with Windows 7?

    My laptop has 3 ports (Microphone, and 2 headphone ports), and I've got a VERY bad external mic, that I might be giving to someone else, because I have Earpods. The only thing is, the Earpods don't have a microphone cable as well as a headphone cable, and the Earpod microphone doesn't work with Windows 7! Can anyone give me the drivers for it or something? I really love the quality of these headphones and it also means I don't have to lean towards my microphone (my desk won't allow me to move the mic any closer to me). Any help is greatly appreciated.

    Have you tried a hard reset of your iPad by holding down the Home button and sleep button together until your iPad goes black and the Apple logo reappears, then let the buttons go?

  • When I plug in my iPhone to sync my things, an error message is constantly coming up, each time saying I need to download the new iTunes, but I have and it's still not working. What do I do?

    It was working perfectly fine until I recently updated my phone to IOS7, now I have no clue what to do haha

    Hi caitlin02,
    If you are having issues with an iTunes update error message, you may want to double-check that you are running iTunes 11.1.2:
    Apple Support: iTunes 11.1.2
    http://support.apple.com/kb/dl1614
    Regards,
    - Brenden

  • When I go to sites and on facebook it says I need to download adobe flash 11. Even when I do it dows not work. what is happening? All other search engines work.

    I can not access my games or anything on facebook when using firefox as it tells me to download flash 11. I have downloaded it and still not working.

    Use http://ninite.com/flash/ninite.exe to download and install the Flash for Firefox

  • HT2731 why does my ipod keep saying your apple id has been disabled when i try to get a free app?

    Why does my ipod keep saying 'your apple ID has been disabled when i try to get a free app???

    If you rest it on your computer's iTunes then try logging out of your account on the iPod by tapping on your id in Settings > Store and then log back in and see if it then works.

  • HT1600 why does the apple TV say theres no connection when I have it?

    Why does my apple TV want to recognize my internet password? and what does -39092 mean?

    Hi MLFO!
    I have some information here that I believe will help you troubleshoot this issue a little further. The article is about Wi-Fi connections and the Apple TV, and can be found here:
    Apple TV (2nd and 3rd generation): Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS4546
    Follow the steps provided in that article and you should be well on your way toward resolving this issue. It may also be necessary or helpful to reference this article as well, which contains some useful settings for your Wi-Fi router so that it will connect to iOS and OS X devices more easily:
    iOS and OS X: Recommended settings for Wi-Fi routers and access points
    http://support.apple.com/kb/ht4199
    Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

Maybe you are looking for

  • How To:  I want a frame on a transparent canvas

    I'm not sure this is the place to ask a How To question.  If not, please pardon the space I am using. I want to create a frame (with a drop shadow) on a transparent canvas, and have the inside of the frame transparent as well.  I can create a New doc

  • Logging to sqlplus

    Hi guys, I just installed Oracle 8i personal Edition so that I can practice PL/SQL. I have three system created accounts (INTERNAL, SYS AND SYSTEM)and their passwords. But when I connect to SQLPlus, it also asks me Host String alongwith userid and pa

  • Shadows appear on screen at bottom

    When I move away from the main screen, shadows appear across the bottom of the screen where the dock icons were. In some cases the shadows are dark and some are light, but the shadow is very annoying. I see that this can be changed on an iphone by re

  • Since last update for iOS can't open PDF file in iPhone 5

    Since last update on PDF can't open PDF file on iOS. MSG says that PDF file I'm trying to open is not a valid PDF file but I can open It on iPad. Any explanations please ?

  • The reative cloud app won't open

    Downloaded all CC 2014 apps PPRO, PRELUDE,PHOTOSHOP,AUDITION etc. Premiere CC 2014 as mentioned before won't open it sends you to a trial and enter serial number page.  Thought I would reinstall all CC2014 apps but the CC app for installation won't o