HT202179 MacBook Pro Fan is very loud overnight. How are they replaced?

MacBook Pro Fan just started to make a lot of noise.This is a MacBook Pro 15 inch 2.4/2.2GHz purchased June 2007. Is this something that most people can replace or does Apple need  to fix it or is it time to get a new one base on age and potential repair cost? 

Your Mac uses measured temperatures to determine fan speed in a feedback loop.
Racing fans are an indication that your Mac is overheating, or a temperature sensor is not working properly. Replacing the fan will not fix the problem.
Your appointment for an evaluation at the genius Bar of an Apple store is free, in warranty or out. There is no obligation to have them do any work for a fee, but if you choose to, charges are generally flat rate for guaranteed repair, no surprises.
If you recently replaced components, such a RAM DIMMs, with parts that do not have Apple-approved temperature sensors, that can also cause such problems.

Similar Messages

  • MacBook Pro fan goes very loud

    This happens when I'm playing CS:GO (Countestrike Global Offense).
    I don't have this when playing other games (League of Legends, Left 4 Dead 2). I have a Notepal X3 cooler aswell to cool it down.
    I have a
    MacBook Pro 13 inch,
    2.9 GHz Intel Core i7,
    8 GB 1600 MHz DDR3
    Video: Intel HD Graphics 4000 1024 MB
    650 GB of 750 GB Free Space and I'm running the new OSX Mavericks.

    Install istat menus:
    http://bjango.com/mac/istatmenus/
    When your MBP gets hot, open istat menus and post an image of the output for inspection.  If temperatures are approaching 100°c, then there MAY be a cause for concern.  Be aware that thermal shutdown will occur before the MBP self destructs.
    Ciao.

  • My MacBook Pro is running very slow. How can I check is out?

    .My MacBook Pro is running very slow. How can I check is out?

    Backup your data.  Your disk/SSD may be failing.
    What has changed lately?
    - Has your disk/SSD filled up recently?
              How much free space? 
              Less than 10 GB? 
              Less than 20 GB?
    - Did you upgrade OS X recently (for example from 10.8 to 10.9 or 10.9 to 10.9.1)?
    - Have you installed any 3rd-party software recently?
    Run Disk Utility (from the Applications  > Utilities folder).
    - Click on the system disk (Macintosh HD) and Verify Disk.
    - Does it report errors or does it finish normally?
    Try an SMC Reset.
    http://support.apple.com/kb/HT3964
    Boot in Safe Mode.
    http://support.apple.com/kb/HT1564
    When in Safe Mode does it operate normally?
    After rebooting in normal mode is it faster?

  • Macbook Pro makes a very loud noise as soon as i turn it on

    hi there im having an issue and i was wondering if someone could help me.. basically i only just bought my macbook pro about a week ago and my issue is that every time i turn it on it makes a really LOUD noise which is so irritating! and i know its not normal cause i have a friend with a macbook pro and his doesn't do that the noise he has is very low.. i was wondering if someone could help me out?

    You might try running the extended version of the Apple Hardware Test (on one of your gray system discs) and see if you get anything in the nature of an error code which would point to the cause of the noise.
    Also, download iStatPro and use it to check your fan speed. If it is 6000 RPM or so, that is likely the cause of the noise. Fans normally idle silently at 2000 RPM, so 6000 RPM would not be normal.
    Also, if the noise is the fan, open Activity Monitor. Select "All Processes" at the top and "CPU" on the bottom. Look for a rogue process which is consuming an inordinate amount of the CPU.
    If the fans are at 2000 RPM, there is a high possibility that the noise is coming from your hard drive. If so, back up everything immediately and contact Apple about a repair or replacement. Since your Mac is just a week old, you may be able to exchange it for a new one if there is a hardware problem with it.
    Good luck!

  • Macbook Pro Lid Making Very Loud Cracking Noises

    I recently got my Macbook Pro 13" screen replaced for a pixel defect. When I opened and closed my lid, the lid moved smoothly from either position.
    Now, it feels as if the lid has more resistance when I operate it. Worst of all, when it is at a 90 degree angle and I slowly retract it, the lid makes a very loud "crack" from the hinge. Could it be that the lid's screws are in too tightly?

    You can try a SMC reset:
    http://support.apple.com/kb/HT3964
    you can also check this:
    http://www.ifixit.com/Answers/Active?search=replace+fans&csrf=sqmfo0yj19

  • MacBook Pro Fan is Being Loud?!

    My MacBook Pro that I bought in 2011 is being so loud.  I think it's the fan.  But it's NEVER done this before.  Has anyone else experienced this or have any suggestions or ideas on what's wrong?  I'm not using it any differently than I always have.  I'm a senior in college, I mostly type papers as I am a pre-law student.  Thank you!

    Try resetting the SMC
    Shut down the computer.
    Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
    On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
    Release all the keys and the power button at the same time.
    Press the power button to turn on the computer.
    Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.

  • My MacBook Pro is running very slow. How do I find out what is causing this?

    How do I find out why my MacBook Pro is running so slow? Then how do I fix it?

    Suggestions of Things You Can Do To Help A Slow Computer
    If your computer seems to be running slower here are some things you can do:
    Start with visits to:     OS X Maintenance - MacAttorney;
                                      The X Lab: The X-FAQs;
                                      The Safe Mac » Mac Performance Guide;
                                      The Safe Mac » The myth of the dirty Mac;
                                      Mac maintenance Quick Assist.
    Boot into Safe Mode then repair your hard drive and permissions:
    Repair the Hard Drive and Permissions Pre-Lion
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    Repair the Hard Drive - Lion/Mountain Lion/Mavericks
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilites Menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD disk icon and click on the arrow button below.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
    Restart your computer normally and see if this has helped any. Next do some maintenance:
    For situations Disk Utility cannot handle the best third-party utility is Disk Warrior;  DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible.
    Note: Alsoft ships DW on a bootable DVD that will startup Macs running Snow Leopard or earlier. It cannot start Macs that came with Lion or later pre-installed, however, DW will work on those models.
    Suggestions for OS X Maintenance
    OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep.  Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger.  These utilities have limited or no functionality with Snow Leopard or later and should not be installed.
    OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive.
    Helpful Links Regarding Malware Protection
    An excellent link to read is Tom Reed's Mac Malware Guide.
    Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
    See these Apple articles:
              Mac OS X Snow Leopard and malware detection
              OS X Lion- Protect your Mac from malware
              OS X Mountain Lion- Protect your Mac from malware
              About file quarantine in OS X
    If you require anti-virus protection I recommend using VirusBarrier Express 1.1.6 or Dr.Web Light both from the App Store. They're both free, and since they're from the App Store, they won't destabilize the system. (Thank you to Thomas Reed for these recommendations.)
    Troubleshooting Applications
    I recommend downloading a utility such as TinkerTool System, OnyX, Mavericks Cache Cleaner, or Cocktail that you can use for removing old log files and archives, clearing caches, etc. Corrupted cache, log, or temporary files can cause application or OS X crashes as well as kernel panics.
    If you have Snow Leopard or Leopard, then for similar repairs install the freeware utility Applejack.  If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line.  Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. Applejack does not work with Lion and later.
    Basic Backup
    For some people Time Machine will be more than adequate. Time Machine is part of OS X. There are two components:
    1. A Time Machine preferences panel as part of System Preferences;
    2. A Time Machine application located in the Applications folder. It is
        used to manage backups and to restore backups. Time Machine
        requires a backup drive that is at least twice the capacity of the
        drive being backed up.
    Alternatively, get an external drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
      1. Carbon Copy Cloner
      2. Get Backup
      3. Deja Vu
      4. SuperDuper!
      5. Synk Pro
      6. Tri-Backup
    Visit The XLab FAQs and read the FAQ on backup and restore.  Also read How to Back Up and Restore Your Files. For help with using Time Machine visit Pondini's Time Machine FAQ for help with all things Time Machine.
    Referenced software can be found at MacUpdate.
    Additional Hints
    Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.
    Add more RAM. If your computer has less than 2 GBs of RAM and you are using OS X Leopard or later, then you can do with more RAM. Snow Leopard and Lion work much better with 4 GBs of RAM than their system minimums. The more concurrent applications you tend to use the more RAM you should have.
    Always maintain at least 15 GBs or 10% of your hard drive's capacity as free space, whichever is greater. OS X is frequently accessing your hard drive, so providing adequate free space will keep things from slowing down.
    Check for applications that may be hogging the CPU:
    Pre-Mavericks
    Open Activity Monitor in the Utilities folder.  Select All Processes from the Processes dropdown menu.  Click twice on the CPU% column header to display in descending order.  If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar.  Click on the Force Quit button to kill the process.  See if that helps.  Be sure to note the name of the runaway process so you can track down the cause of the problem.
    Mavericks and later
    Open Activity Monitor in the Utilities folder.  Select All Processes from the View menu.  Click on the CPU tab in the toolbar. Click twice on the CPU% column header to display in descending order.  If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar.  Click on the Force Quit button to kill the process.  See if that helps.  Be sure to note the name of the runaway process so you can track down the cause of the problem.
    Often this problem occurs because of a corrupted cache or preferences file or an attempt to write to a corrupted log file.

  • My Macbook Pro is running very slow. Here are the results of Etrecheck

    Results:
    EtreCheck version: 1.9.12 (48)
    Report generated July 15, 2014 7:02:27 PM CDT
    Hardware Information:
      MacBook Pro (15-inch Early 2008) (Verified)
      MacBook Pro - model: MacBookPro4,1
      1 2.4 GHz Intel Core 2 Duo CPU: 2 cores
      2 GB RAM
    Video Information:
      GeForce 8600M GT     - VRAM: 256 MB
      Color LCD 1440 x 900
      spdisplays_display_connector
    System Software:
      Mac OS X 10.6.8 (10K549) - Uptime: 0 days 0:3:55
    Disk Information:
      Hitachi HTS542520K9SA00 disk0 : (186.31 GB)
      - (disk0s1) <not mounted>: 200 MB
      Macintosh HD (disk0s2) / [Startup]: 185.99 GB (115.42 GB free)
    USB Information:
      Apple Inc. Built-in iSight
      Apple, Inc. Apple Internal Keyboard / Trackpad
      Apple Computer, Inc. IR Receiver
      Apple Inc. BRCM2046 Hub
      Apple Inc. Bluetooth USB Host Controller
    Kernel Extensions:
      [not loaded] com.anchorfree.tun (1.0.1) Support
      [loaded] org.virtualbox.kext.VBoxDrv (4.1.14) Support
      [loaded] org.virtualbox.kext.VBoxNetAdp (4.1.14) Support
      [loaded] org.virtualbox.kext.VBoxNetFlt (4.1.14) Support
      [loaded] org.virtualbox.kext.VBoxUSB (4.1.14) Support
    Startup Items:
      VirtualBox: Path: /Library/StartupItems/VirtualBox
    Launch Daemons:
      [loaded] com.adobe.fpsaud.plist Support
      [loaded] com.anchorfree.ajaxserver.plist Support
      [loaded] com.google.keystone.daemon.plist Support
    Launch Agents:
      [loaded] com.google.keystone.agent.plist Support
    User Launch Agents:
      [loaded] com.adobe.ARM.[...].plist Support
      [not loaded] org.virtualbox.vboxwebsrv.plist Support
    User Login Items:
      iTunesHelper
      Genieo
    Internet Plug-ins:
      o1dbrowserplugin: Version: 5.4.2.18903 Support
      Unity Web Player: Version: UnityPlayer version 4.1.2f1 Support
      RealPlayer Plugin: Version: (null) Support
      AdobePDFViewerNPAPI: Version: 10.1.10 Support
      FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
      Silverlight: Version: 5.1.10516.0 - SDK 10.6 Support
      QuickTime Plugin: Version: 7.6.6
      Flash Player: Version: 14.0.0.145 - SDK 10.6 Support
      googletalkbrowserplugin: Version: 5.4.2.18903 Support
      iPhotoPhotocast: Version: 7.0
      AdobePDFViewer: Version: 10.1.10 Support
      JavaAppletPlugin: Version: 13.9.8 - SDK 10.6 Check version
    iTunes Plug-ins:
      Quartz Composer Visualizer: Version: 1.2
    User Internet Plug-ins:
      BrowserPlus_2.9.8: Version: 2.9.8 Support
    3rd Party Preference Panes:
      BrowserPlus  Support
      Flash Player  Support
    Top Processes by CPU:
          8% Safari
          3% WindowServer
          0% mds
          0% fontd
          0% coreservicesd
    Top Processes by Memory:
      63 MB WebProcess
      39 MB WindowServer
      33 MB Safari
      25 MB mds
      14 MB Finder
    Virtual Memory Information:
      1.13 GB Free RAM
      312 MB Active RAM
      383 MB Inactive RAM
      190 MB Wired RAM
      146 MB Page-ins
      0 B Page-outs

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
    Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/ { next;} /(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    7. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    8. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
    11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
    Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • My mac pro early 2009 graphics fan is very loud

    I think something might be wrong with the video card. The fan is very loud at all times and gets louder on flash or video sites. The fan speed is usually double the other fans.

    Try smc reset to see if the fan slows down. 
    Add something like iStat Pro (or iStat Menus, Hardware Monitor, etc.) to measure the fan speeds and some of the temperatures.  Note none of these can measure the video card fan speed directly but knowing the various temps might indicate why it's thinks it needs to rev up.

  • Mainstage 2.1 makes my Macbook Pro fans run full bore.

    Upgraded to V. 2.1 and Snow Leopard. Now my Macbook Pro fan kicks in at full blast whenever I play any patches or run backing tracks. Cpu hit looks low and memory usage is average. This never happened before. Any ideas as to what's happening?

    My MBP fans have always run at full capacity when using MS 1, 2 or 2.1. They start out running normally but then start to rev up after a couple of minutes. You could try running some fan control software to manually adjust your fan thresholds but ultimately, does it really matter if the fans are running hard? Seems to me that they're running hard because they need to....MS is still very hard on system resources even if the meters say otherwise. It's the only app I run that causes the fans to run flat-out.

  • Do you think my macbook pro fan could be broken?

    Earlier today when I opened my laptop the screen was black and it appeared to be shut down. I hit the restart button and when the screen came up it said that I had "shut off my laptop due to a problem", though I did not manually shut it down. It was working 100% fine yesterday, so I'm not sure what could have happened to it. I know it wasn't my battery, because I had a full charge prior to shutting it and upon restart I still had a reasonable charge. I was more or less ignoring my laptop's unusual pop-up until I noticed that my computer was feeling much hotter than normal, so I checked iStat pro to look at temperatures. The CPU temp was around 82 degrees or so when I checked, while I was playing a videogame, which doesn't seem too high but the area around my keyboard felt much hotter to the touch than normal. What is really concerning me is that iStat says my fan is running at 0 rpm, even while I was playing a graphic-intensive game. The CPU is down to 65 degrees since I have stopped playing the game, however I have heard that your laptop will shut itself off to prevent overheating, and I'm wondering if this is what happened to my laptop sometime between yesterday and today. Does it sound like my fan could be broken? There isn't an apple store very close to me and my warranty just ended so I'd rather work it out myself if possible. I don't believe it is a faulty sensor either as iStat gave me temperature readings for everything. If you think my fan is broken, do you have any advice or know how much it would cost to fix/replace?

    Good detective work.
    I don't believe that 80ºC is extreme for occasional use, but over extended periods of time, this can stress your machine. I beleve you should visit your local Apple Store. They can determine if the fan is broken.
    In the meantime, I could avoid:
    - CPU-intensive activities like 3D gaming for extended periods of time.
    - Using your notebook on your lap. That can raise its temperature thirty or more degrees.
    - Dust or dirt can choke the fans, increasing temperatures and even the risk of fire.
    Replacement of a fan is not very expensive, if it comes to that. You can also do it yourself:
    http://clarebayley.com/2011/10/how-to-replace-a-macbook-pro-fan/

  • Mac mini fan is very loud when watching a dvd

    Hi,
    Just bought a Mac mini (2GBRam 2GHz intel) and when watching a dvd the fan spins very loud which gets very annoying! Is this normal for watching dvd's on the Mini as I have a Macbook with similar specs and there is not much sound from that when watching dvd's. I installed 10.5.1 on the Mini and the Macbook still has 10.4.11...Any ideas?

    The reset is always worth trying, just in case the problem is in the system controller. However, I'm not sure that I'd blame MacOS itself for the problem, because it does not appear to be similarly reported elsewhere. As such, I'd say that if you can't resolve this with a reset, you may find the next best option is an erase and install of Leopard, followed by downloading and installing the 10.5.1 update from http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx1051update.html
    Of course, since an erase and install wipes the hard drive, it is essential you back up your data before you do this!

  • By using iPhoto an Switch, the fan become very loud.

    Hello.
    I have the brand new MacBook Air 2013, with Intel i7.
    Now when i using iPhoto an Switch, then the fan become very loud.
    In iPhoto i have the problem, when i look for photo's.
    When i change the bitrate of an mp3 in Switch, than the fan speed up i make a lot of noise.
    I have make an SMC reset, but the problem is still there.
    Anyone with the same problem, or have a fix for this.
    Thanks.

    You fan operates when a temperature threshold is reached, it sounds as if there is a slight noise, that one of the locking screws that bolts it is vibrating against its screw-hole or the board.
    Call apple or go to the store and see about an exchange, I dont know how loud it is on your machine, but it should not be "making a lot of noise". Its sounds like an off balance bearing in the fan hub,......but without hearing it, i cant determine if its THAT problem, or merely a bolt rattle holding the fan assy. in place

  • Macbook Pro Fans Just Went Spinning Nuts

    Hi.
    So I'm surfing the web (using firefox) have 2 tabs open and suddenly the fans on my macbook pro start to spin faster. Then they spin faster gain finally maxing out at 5360 rpm. The temperature all the time was never above 55 degress C. They spun at 5360 rpm for about 10 minutes and then spun down to a normal level of 3154 rpm.
    I checked the processes and some kernal task is up at the top using 1.84 GB of virtual memory. No other programs running but plenty of other tasks listed as sleeping.
    First question ... what is the max rpm that the fans should safely spin at?
    Second question ... why would it suddenly take off like that spinning fans when there's only one program running?
    I had an alienware before and it started running its fans like that after a few months ownership ... a few months later it chew the hard disk and lost a lot of data on me.

    The maximum RPM for the MacBook Pro fans is 6000rpm.
    I have no idea why the fans would suddenly "take off" like that but try running the Apple Hardware test. You can do this by inserting your original install disk 1, restart the computer with the D key held down until the hardware test starts loading. Once the test has loaded select the option to perform extended testing and then start the test. Note down any error codes and post them here.
    Note that when you load the hardware test up the mouse will be very jittery and the computer will appear to freeze during the test, I have encountered this on all the tests I have run and consider it normal behaviour.
    Hope this helps
    J.C

  • Macbook pro fan running slow

    macbook pro fan is running slow and hot.  it fluctuates between 212 and 375 rpms.  heat rises up to 104c.  do i need to replace the fan?

    Before I suggest advice, I urge you to keep your machine under 160F at all times. I don't want to sound like an alarmist, but you can seriously damage your machine with that kind of use. Some solders melt at 225F, weaken at 190F.
    You may have to replace the fan - or you may need to clean the inside of your machine and fan. It's hard to tell without inspecting your machine.
    Or you may find that you need to get a different browser, and become more aware of temperature; laptop machines are much more sensitive to termperature issues than desktop Macs. Some day, you'll thank me for that advice.

Maybe you are looking for