HT202213 Home Sharing set up on my MacBook etc. When trying to login to home sharing on my Apple TV, I get an error stating incorrect password. Any suggestions?
I get error message stating username not found or incorrect password. Both are valid and work fine on my other devices.
Hello scollins60,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
"Error -3150"
This alert is often related to a lost connection to the iTunes Store.
If you encounter this alert and you have verified you have a connection to the Internet using Wi-Fi, please reviewAirPort and Bluetooth: Potential sources of wireless interference.
If the issue persists, and you're using iTunes for Windows, you may need to flush your DNS and remove pop-up or ad-blockers.
Finally, this can occur due to timeouts caused by security software.
Best of luck,
Mario
Similar Messages
-
I'm trying to connect my MacBook Pro running on OS 10.8.2 to a Linksys EA3500 router and when I go to click on the set up icon I get an "unsupported operating system". Any suggestions on what to do? The Linksys site is useless. Do I need some kind of upgrade?
Don't use the CD software its not necessary.
Infact put it in the trash.
Your router will have an IP address in the range 192.168.1.1
Connect your router to your Mac via Ethernet cable (They usually supply one with the router and don't worry which end goes where the Mac LAN socket is bi-directional)
Also connect your router to your telephone line.
Now open your Web browser Safari . Type in the IP address above and a Javascript control panel will launch
Enter the default password and username (They are on a label on the router )
Your now have the ability to set up your router.
Your will need the password and user name supplied to you by your ISP at a minimum.
Enter these and most modern routers automatically configure the basic networking setting.
You now need to go to the security setting and set this as WPA2 Personal (NOT Enterprise) or WPA2 with AES and TKIP which ever it refers to and create a pass-phase. WRITE it down
You should be online.
Now remove the cable and connect to the Wifi and enter that passphase. -
i keep getting error code 3212 when trying to connect to home sharing.. i am connected to the internet
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards? -
Laptop brings up error 5506 when trying to turn on home sharing ?
Laptop brings up error 5506 when trying to turn on home sharing.
How do I fix this ?Me neither... But my home haring did just come back after signing in and out of iTunes and trying to turn on home sharing....judging by the popularity of this issue right now and the older posts on the subject, it would seem that it's some kind of glitch with the apple servers.
-
So we just got a new Macbook and I also installed the apple configurator tool. I'm using it to prepare the iPads for deployment and it won't let me prepare them? It gets an error stating "retrieving iOS info from apple" then it stops and says "internet error". My Internet connection is fine with the Mac-book. It shows the iPad is listed under the Prepare logo up top as 1 but under supervise none are shown. Although it does show itself in iTunes. Also the profile I created is fresh and has no errors. We have tryed nearly everything I cna think of and online forums are not giving us to much info on this error.
A wag at this. A port issue?
"Apple Push Notification network setup
When MDM servers and iOS devices are behind a firewall, some network configuration may need to take place in order for the MDM service to function properly. To send notifications from an MDM server to Apple Push Notification service, TCP port 2195 needs to be open. To reach the feedback service, TCP port 2196 will need to be open as well. For devices connecting to the push service over Wi-Fi, TCP port 5223 should
be open."
http://www.google.com/url?sa=t&rct=j&q=ports%20ios%20configure%20ipad&source=web &cd=1&ved=0CC0QFjAA&url=http%3A%2F%2Fimages.apple.com%2Fipad%2Fbusiness%2Fdocs%2 FiOS_MDM.pdf&ei=5lXGUPCcJMXx0gH2wYG4BA&usg=AFQjCNFzINvs7ktT-6o6Q_l4Qk2HkpjtCA&ca d=rja
google: ports ios configure ipad
Try it on your home network where there isn't a lot of 'controls' -- network filtering , firewalls, etc.
Robert -
Macbook crash when trying to autorize user with system admin account in maverick
macbook crash when trying to autorize user with system admin account in maverick,
Please helpHi Frank,
Please refer to following operations and check if can help you.
1.
wmic /node:"HOSTNAME" /user:"ADMIN_USER" /password:"PASSWORD" logicaldisk
Please replace HOSTNAME with IP address, then monitor the result.
2. Please open Control Panel, select User Accounts and click Manage another account. Then select the user account which you will use in WMIC command. Then please select Change
the account type and check if you have set it as Administrator. If no, please set it as Administrator and check if this issue still persists.
3. Please refer to the following thread and check if can help you.
WMI
Remote "Access Denied"
If this issue still persists, please let me know the edition information of Windows OS that this issue occurred
in. Meanwhile, you described “The user account is a member of Administrators.” Would you please let me summarily know how operate?
Hope this helps.
Best regards,
Justin Gu -
I'm really tired of all the redirect I get when I'm surfing the net. i've set in the option to warn when trying to redirect
If you are being re-directed to other sites, particularly when searching, this can be caused by malware. Try running several malware scanners. It is best to run several as each will pick up things that the others miss. Some scanners you can try are:
* [http://www.malwarebytes.org/mbam.php Malwarebytes]
* [http://www.superantispyware.com/ SUPERAntiSpyware]
* [http://www.lavasoft.com/products/ad_aware_free.php Ad-Aware]
* [http://www.microsoft.com/windows/products/winfamily/defender/default.mspx Windows Defender]
* [http://www.safer-networking.org/en/home/index.html Spybot S&D]
If the above malware scanners do not find any malware or can not clear it, you should consider posting in one of these forums for specialized malware removal help:
* http://forums.spybot.info/
* http://www.spywarewarrior.com/index.php
* http://forum.aumha.org/
* http://www.bleepingcomputer.com/forums/
* http://www.spywareinfoforum.com/ -
i am unable to set up my iphone 5 after reset since am getting a error stating 'unable to reach server' . i tried restoring the same from my computer but i get a error stating server unavailable' . please help me as my phone is stuck at the set up page. so i have already tried recovery mode as well.
Contact Apple support for warranty service.
-
Hollie**it!
I can't even open iTunes anymore.I have Windows 7 Home Premium 64 Bit. I tried to update iTunes Trice Now. This is what I get: Runtime error! Program: C:\Program Files (x86)\iTunes\iTunes.exe. R6034 An application has made anHello there, Vinnie.
The following Knowledge Base article addresses the very issue you're describing:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
My school MacBook will not login. When trying to login it tells me to make a new password, no password will work. HELP
Welcome to the Apple Support Communities
http://support.apple.com/kb/HT1274 -
when intalling itunes i get message saying system administrator has set policies to prevent this installation; when trying to uninstall message says you do not have sufficient access to uninstall itunes please contact your administrator. i am the dministrator.
Windows right?
Likely your not the administor any more, the botnet is.
Check on this site really quick if your part of a botnet
http://botnetchecker.com/
All clear? Hopefully. Backup your files to a external drive, cd or dvd, USB keye etc off your computer.
Run the sfx file on this site and it will burn to a cd.
http://www.avira.com/en/support-download-avira-antivir-rescue-system
Next hit your BIO's key and set the cd to boot first, run the scanner and see what it pops up.
If your all clear then create another Admin, transfer your files over from the first Admin.
See if that works, eventually when your totally over to the new Admin, delete the old one.
If you can't create a new Admin, find out who locked your machine down, like your parents or it's a school computer?
Likely installed spyware or "nanyware" to watch you.
Hope that works. -
I receive an error message when trying to link my iMessage account to my Apple ID. My phone syncs fine, just my Macbook doesn't work. Same issue with Facetime.
HI,
In effect this is a DNS block.
You can do it.
You need to be in an Admin Mac User Account that has non blank password.
Go to the Applications/Utilities folder and open Terminal.
You should see your shortname (the one under the Little House icon) followed by the $ symbol
Copy and paste the bold text below into Terminal after the $ symbol.
sudo pico /etc/hosts
This will load the file "hosts" into and editor that works in Terminal.
Use the arrow keys to get to the line with Verisign in it.
Now type the # symbol and it will be added in front of the character that is highlighted.
The # symbol is either Shift +3 or ALT+ 3 depending on your keyboard layout
Now use CTRL and O keys together.
This Saves the changes.
Quit Terminal.
10:02 PM Wednesday; May 1, 2013
iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.3)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images." No, Seriously -
after hibernation, when trying to login to MacBook Air, it does not accept my password. I have to shut off and then get prompted with the following: Mac OS X wants to use the "login" keychain. I put in the password there and it works. any suggestions?
Back up all data.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
Right-click or control-click the login entry in the list. From the menu that pops up, select Change Settings for Keychain "login". In the sheet that opens, uncheck both boxes, if not already unchecked.
From the menu bar, select
Keychain Access ▹ Preferences ▹ First Aid
If the box marked Keep login keychain unlocked is not checked, check it.
Select
Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain. Quit Keychain Access. -
I have a macbook pro, when I try to open excel it will not open and I get a messages that states "cannot be opened 1712.
What version Mac OS X?
What version Excel? -
so I've downloaded a tv series from iTunes onto my macbook pro, for some reason the episodes on my iTunes won't play at all. no sound and no images. any suggestions and help?
Hi,
As you have match, I suggest that you create a new library by holding ctrl whist launching iTunes. Select create new library. Sign into iTunes Store and activate match. You will now have access to your music and will be able to stream your music.
Options : get a new external drive formatted for mac and either download music from match or copy music from old drive to new one. Alternatively you could reformat old drive and download music from match - I would not be comfortable using this option as it means erasing drive before being able to use with mac.
Jim
Maybe you are looking for
-
Order confirmation and Order changes
Hello Guru's, I am having following issue, please let me know ur inputs on the same how to handle below situation. There is Customer Vendor relationship under one system and under one company code. Customer orders goods from Vendor and this Vendor su
-
XMLGregorianCalendar and Duration classes
I have never used this type of classes before... I stopped programming Java a long time ago :p I have an XMLGregorianCalendar (called start_date) with the current date set, which I use to set the start of an event. I want to set an XMLGregorianCalend
-
How do you filter entities by properties in the Distribution List?
Hello, experts: Can you tell me how I can filter entities by property in the Distribution List? For example, I only want to distribute the input schedule to the entities that have a "PROJECTLVL" property of "Y". Thank you. Bei
-
I am trying to insert tables for a website I am making for my school project, and when i click on the Insert>Table i get this error message: "While executing onLoad in TableCommands.htm, a JavaScript error occured." I clock on OK, and then the table
-
i found a great math page, but it looks ugly,so i downloaded a css injector plugin for chrome ( https://chrome.google.com/extensions/detail/hiadkoalmmkgennhcldmdlndfgagkcim?hl=en ) after editing the css, it will be applied on all subpages on that mat