HT202213 I recently bought a new computer and installed itunes, i transferred my music of my old computer but i am now not able to add songs to my ipod touch off my new computer?
I recently bought a new computer and installed itunes, i transferred my music of my old computer but i am now not able to add songs to my ipod touch off my new computer?
Drag the folder into the library in the open iTunes program window.
(113784)
Similar Messages
-
Hi i recently bought 8gb of ram and installed it in my mid 2010 13' macbook pro, but whenever i start my computer it freezes at the apple sign in the startup. I just put back my default 4gb of ram back into my computer and it runs fine. Any suggestions?
jamiesfromportland, greetings: I do not take issue with your very valid reasons for purchasing RAM from Apple. However by recommending not to purchase RAM from third party vendors I would suggest is unfounded advice. Most of the problems that occur with third party RAM are attributable to the lack of adherence to the required specifications, viz. this post.
I would be willing to wager that purchasing RAM from reputable vendors such as OWC or Crucial one would find similar fail/success ratios as those purchased from Apple. In both cases this assumes that the specifications are adhered to.
I have always purchased RAM upgrades from third party vendors with no performance issues. True that I do so to save money but I do not skimp on quality.
Ciao. -
i cannot sync,back up or add songs to my iPod Touch 5th generation 32 GB-whenever i make changes and click the apply/sync button it takes hours but still it doesn't sync or add music to my ipod............i thought there was a problem with itunes so i uninstalled it and downloaded the latest version but still the problem continued....the picture below shows how it looks after 28 minutes of syncing........
The picture below shows all the apple software that i have installed- Reboot computer
- Try another cable and USB port
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
I have a apple ipod touch but recently I restored all the settings, as well as the applications. But now I am not able to add songs to it. There is blank screen that shows the symbol like to connect to itunes first. I'm not able to use that... Please help
The iPod's firmware is corrupt. You'll need to restore it again in iTunes. If necessary, place the iPod in recovery mode for iTunes to recognize the device. Use the instructions in this Apple support document to walk you through the process of placing the iPod Touch into recovery mode.
iOS: Unable to update or restore
B-rock -
just bought a new computer so I am trying to access my music on itunes but i can't seem to find it. I have de authorized my old computer and installed itunes on my new computer but my music doesn't seem to be there. Any ideas what i'm doing wrong?
Your music and playlissts will only be where you put them.
Have you copied them to your new computer from your old one? -
How can I get my music to play.
Authorize the computer from the "Store" menu. You will have to use the Apple ID used to purchase the music.
-
Nothing comes up in the airport utilities app either. The amber light continuously blinks. I also tried connecting an ethernet cord.
We have a netgear n150 router in our house as well but it doesn't connect to my phone or MacBook. That's connected to a Windows PC.
Is this Netgear router your "main" wireless router? That is, is it connected directly to the Motorola modem by Ethernet? Which exact model of the AirPort Express do you have? How do you have the Express configured to work with the Netgear? -
HT201269 i m not able to transfer songs from my itunes to my new iphone ???
i m not able to add songs from itunes to my new i phone its syncs with it but not adding them?????
Hello 521056,
Thank you for the question. If you are not able to manually sync music to your iPhone, I recommend checking if you have the "Manually manage music and videos" option enabled in the Summary tab:
You can find all the steps to manually sync music in the following article:
Managing content manually on iPhone, iPad, and iPod
http://support.apple.com/kb/HT1535
Thank you for using Apple Support Communities.
Best,
Sheila M. -
I recently bought a new computer and I cannot get it to sync with my iPod. I also cannot see my purchased songs in iTunes on my new computer? I'm not sure how to fix this.
follow the steps given here...
Syncing to a "New" Computer or replacing a "crashed" Hard Drive -
I recently bought a new computer and downloaded itunes onto it. When i sync my ipod it prompts me to authorize my computer
with the purchases that i've made, but when i try to do so, my apple i.d. is not what shows up and so my ipod won't sync any of my songs or apps. I have no idea who's username i'm seeing and i've never seen it before. That's the only thing that is stopping my ipod to sync, a password that isn't mine!! I am beyond frustrated and don't know what else to do, if someone can please help me i would be so appreciative you have no idea. Thank you so muchClose your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US -
Recently bought a new computer and all my music appears in iTunes as well as on my computer in a saved folder. When I try to play the music in iTunes I get an error that reads"the song could not be used because the original file could not be found. Would you like to locate it?" Hope you can help me solve this issue.
Thanks,
ShellybooThis happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout, or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
tt2 -
i recently bought a new computer and installed itunes and downloaded music already... I want to sync my new music into my ipod but it wont let me it says my ipod is linked to another itunes library, so If i want to go ahead with the process it says it will erase all my movies, photos, apps ect.. I press okay then it says about another itunes library If i want to sync my ipod i have to "erase and sync" if i go ahead with this will it erase all my photos?? All im worried about are my pictures.... if i do this will it erase my pictures... so far i havent been able to put the recently added music to my ipod... i tried it my husbands iphone and synced it since he has no music or videos... and it had the autofill option so i did this... and it worked.. why will it not work on my ipod..
You can only sync everything with your one syncing computer/iTunes library. Yu can:
- Make this your syncing computer by:
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities
- Use the manual method to copy music and videos from any computer/iTunes library to the iPod. See the manual method included here:
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities -
I recently bought a new laptop because my old one crashed. The only backup I had for my music was on my ipod. My new computer will not recognize the ipods music and I can't transfer anything. It keeps asking me to sync the ipod to this computer, but I'm scared to lose all my music. I want to transfer some of the music onto my iphone but I can't. I'm very frustrated and wish I knew more about computers at the moment!?!? What do I do???
You will need the help of some sort of 3rd party software to help you copy the content from your Shuffle back to your PC. Once you have done that, you can reimport this music into iTunes and configure it to sync to your new Shuffle.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock -
I recently bought a MacBook Pro and am trying to purchase music from iTunes. For security, it says that I have a different computer trying to purchase music. Can I switch the computer I purchase my music from?
You can purchase music from up to 5 computers at once.
Just sign in and buy -
I recently bought a new macbook pro and set it up using the migration assistant from my mac mini. I can't get the text message forwarding feature to work with both computers. It keeps saying that I only have 2 devices setup, my iPad and my macbook pro. When I mess with the setting on my mac mini, it goes from saying that that is one of the devices to my macbook pro being the 2nd device. I think that something happened as a result of my using the migration assistant and now it thinks that my macbook pro and my mac mini are one and the same computer. Any ideas?
Thanks, Sig.
The old computer is a 2.6 Ghz Intel Core 2 Duo
The new one is a 2.3 GHz intel core i7
In going over this, thanks to "tallking it out" with you, I did discover the Text Edit problem. Because I've still been unable to get the new computer text size (fonts or whatever) to match the old computer, I did not notice that the curser is now different--the line midway down the curser has to be placed on the line I am working upon, otherwise the edits go elsewhere on the page. Now, with a bit of difficulty, I am able to get Text Edit to work correctly.
If you have any ideas as to why my menu bar and Text Edit type are still so slow, I'd love to have them.
(I went through the process you suggested earlier, re my Trackpad preferences, and found no improvement.)
Maybe you are looking for
-
How to smooth out zooming/scrolling image that jerks (CS4)?
Hi guys/girls, Is there any way that i can smooth out images that zoom in/out with normal classic tween. they are so jittery it looks terrible. I even have a little bit of easing and frames per second set to 30. any info much appreciated! Jeff
-
Detail-with-two-masters : Is there a demo ?
Hi all, I found in the manual following description and I think this could be a solution for many-to-many related Forms blocks (intersection table=detail) : A detail-with-two-masters relation involves a single detail block that has two master blocks.
-
Convert Siebel Date to display in BIP Publisher
Hi, Does anyone know how to convert a Siebel date in 'MM/DD/YYYY' format into the format DD-MMM-YYYY? Thanks Steve
-
Question on using student license for commercial use
As a student, I had purchased a Student Edition of Production Premium 5.5 at my university . Am I allowed to use the software for commercial use?
-
'Do you want to save changes you have made' while closing the form
Hi Everyone, I am working on Oracle Applications 11.5.10.2 version. I have created a new form as per the client requirement and registered with APPS. I met all the requirements, but when ever closing the form getting the error 'Do you want to save ch