HT202351 extended display & switching videos

I have a MB Air connected to an LCD projector. I want to run a video on one display while at the same time, preparing another video to play a bit later. I hate the idea of the audience "watching the cursor pull the screen over" as I move the finished video off the extended desktop and then move the next video on to the extended desktop. Isn't there another way to use multiple desktops in order to play/show different things at different times?
I tried using multiple desktops and found that none of them showed up on the LCD projected screen.
Then I used the Mirror but everyone could watch me prepare the next video to play! Not good!
So the only option was using the extended desktop. In order to play the video, I had to press Command/Return (at the same time) because pressing the play in Quicktime) would not start the video on the extended desktop.  I had to restart the second video from scratch by closing QT after the first one played because the second video would not not play initially.
There has got to be a better/smoother/savvier way to do this.

I have a MB Air connected to an LCD projector. I want to run a video on one display while at the same time, preparing another video to play a bit later. I hate the idea of the audience "watching the cursor pull the screen over" as I move the finished video off the extended desktop and then move the next video on to the extended desktop. Isn't there another way to use multiple desktops in order to play/show different things at different times?
I tried using multiple desktops and found that none of them showed up on the LCD projected screen.
Then I used the Mirror but everyone could watch me prepare the next video to play! Not good!
So the only option was using the extended desktop. In order to play the video, I had to press Command/Return (at the same time) because pressing the play in Quicktime) would not start the video on the extended desktop.  I had to restart the second video from scratch by closing QT after the first one played because the second video would not not play initially.
There has got to be a better/smoother/savvier way to do this.

Similar Messages

  • Updates keep switching from duplicate to extend display

    I'm getting a little tired of this. I keep a lot of desktop shortcuts and I keep them arranged in a specific order. Only, every time Microsoft sends me automatic updates it switches me fro "duplicate" displays to "extend" displays. Which
    leads to all my shortcuts being stacked up on one side, and 45 minutes of putting everything back where it belongs.
    Thanks to the Blue Ray player, I can't just unplug the DVI cable, and I primarily use VGA so that I don't have to switch everything around when I want to use one of my other computers that don't have DVI options.  And, YES, I logged in as "Administrator"
    and changed things there.
    So, either stop changing my settings every time you force me to update, or fix the stupid software that can no longer output Blue Ray video through the VGA signal.  Don't even "try" to lie to me and say it's impossible, there was no problem
    doing it back when my card didn't have a DVI output.
    As it stands, you force me to get a DVI capable because, now that my video card has a DVI output, it is suddenly impossible to output Blue-Ray video over VGA.  Then, even though both cables go to the same monitor, Windows  7 "insists"
    that the 1366x768 DVI monitor is actually a different resolution than the 1366x768 VGA monitor.  Then when I force it to duplicate the display (so I don't have to switch my monitor back and forth just to operate normally,) it decides that I must be mistaken
    every time it updates.
    f

    So far it's happened after every update that requires a restart.  If I restart my computer without an update, it doesn't happen.  If I have an update that doesn't need to restart my computer, then I later restart my computer manually, it doesn't
    happen.
    The drivers for my display haven't been updated since I installed them.  Just went through the update history to make sure.  Checked all that were installed on 11/11/2014 (the last time this happened,) and scanned through all the rest - though
    I don't remember which specific ones required a restart or not.  Didn't see anything ATI (well AMD now,) in the list.  Didn't see anything HP (for the LCD monitor,) either.  Those usually appear under "optional" updates which don't
    install automatically anyways.
    f

  • How to create a 'parallel' extended display through Apple TV Airplay

    Dear all,
    I'm a relatively new Mac user and have not been able to find an answer to my question by looking up key words in Google or here, so apologies if this has been answered before.
    Basically, I would like to know how I can project a video file or a film/TV series I am watching (for example, a video playing in VLC or a film streaming from my subscription to Amazon Prime Instant Video website, open in a browser) onto my Toshiba TV, via Apple TV airplay - whilst still being able to work on a separate window/desktop on my MacBook Air.
    As a PC user slowly converting to Mac, I know how to do this on a PC by using the Windows logo key +P shortcut, choosing 'Extend' instead of 'Duplicate' and then dragging whatever video source I want to watch into the extended desktop screen being projected on my TV. I've tried doing this on the Mac by
    using the multiple desktops in Mission Control (with no success, as Airplay obviously just mirrors what I'm doing on my screen onto the TV, i.e. switching from desktop to desktop as I do on the computer), or
    by clicking 'Extend Desktop' instead of the automatic 'Mirror Built-in Display' on the Airplay icon on the menu bar and then dragging the browser into the extended display on the TV and hitting the 'Full screen' button of the video itself. However, as soon as I do this and click or type anything on my computer desktop, the video automatically minimizes and all I'm left with on the TV display is the browser with the initial smaller version of the film playing within it. In the 'View' tab, I've tried switching Firefox/Safari to 'Full screen' before making the video 'Full screen' too, but again, as soon as I touch anything back on my Mac desktop it minimizes. I've noticed Chrome has an 'Enter Presentation Mode' option available in the 'View' tab, which leaves the video playing full screen, but with a grey bar at the top (which is visually annoying, but still closer to what I'm looking for). Similarly, if I try to drag a video file playing in VLC, as soon as I hit the full screen button, the desktop I'm using on the Mac goes black even though I can still move the cursor on it.
    I'm clearly missing a step somewhere, so any help would be greatly appreciated as I'm a prolific multitasker!

    Hi _MicMacs_,
    It sounds like you've been on the right track in trying to sort out this issue. I'm a bit unclear on what you are describing when you say it works initially, but then immediately reverts when you click back on something in your primary display. You may want to try sizing the window to the display instead of using the full screen option (two opposing diagonal arrows), though this will leave the window border around the screen. For a bit more background on working with multiple displays in Mavericks, you may find the following article helpful:
    OS X: Using multiple displays in Mavericks
    http://support.apple.com/kb/HT5891
    Regards,
    - Brenden

  • Random display switching and weird behaviour. [Solved]

    Hey guys and girls
    Have had Arch running smoothly for a few months now and have avoided posting for minor issues, because your forums are so ace and have been able to find everything I need. Have to say out of all the distros that I've tried Arch simply rocks, especially the AUR!
    Anyway, point of post is this. I'm running KDE and have had similar problems with all the distros I've tried. My machine is a Dell L501X with a Nvidia GT435 graphics card. When I plug my external monitor in (via DisplayPort) it is detected and I can extend it to that monitor, both via randr and via TwinView.
    The problem is that it randomly switches off extended monitor and either mirrors display or switches between 1 active monitor on either laptop or external. This behaviour can be provoked by a random key press, waking up from sleep, or a butterfly flapping its wings on the far side of the galaxy.
    I'm using the Nvidia 319 drivers which I understand have RandR 1.4 support.
    Can anyone suggest what might cause this behaviour? Where would be a good start to debug this? How I might stop it? 
    My xorg.conf :
    # nvidia-xconfig: X configuration file generated by nvidia-xconfig
    # nvidia-xconfig: version 319.17 (buildmeister@swio-display-x86-rhel47-06) Thu Apr 25 22:28:25 PDT 2013
    Section "ServerLayout"
    Identifier "Layout0"
    Screen 0 "Screen0" 0 0
    Screen 1 "Screen1" RightOf "Screen0"
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "Mouse0" "CorePointer"
    EndSection
    Section "Files"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/psaux"
    Option "Emulate3Buttons" "no"
    Option "ZAxisMapping" "4 5"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Unknown"
    ModelName "Unknown"
    HorizSync 28.0 - 33.0
    VertRefresh 43.0 - 72.0
    Option "DFP-0"
    EndSection
    Section "Monitor"
    Identifier "Monitor1"
    VendorName "Unknown"
    ModelName "Unknown"
    HorizSync 30.0 - 83.0
    VertRefresh 56.0 - 76.0
    Option "DFP-3"
    EndSection
    Section "Device"
    Identifier "Device0"
    Driver "nvidia"
    Option "ConnectedMonitor" "DFP-0, DFP-3"
    Option "UseEdidDpi" "FALSE"
    Option "DPI" "96 x 96"
    VendorName "NVIDIA Corporation"
    BoardName "GeForce GT 435M"
    EndSection
    Section "Device"
    Identifier "Device1"
    Driver "nvidia"
    Option "ConnectedMonitor" "DFP-0, DFP-3"
    Option "UseEdidDpi" "FALSE"
    Option "DPI" "96 x 96"
    VendorName "NVIDIA Corporation"
    BoardName "GeForce GT 435M"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Device0"
    Monitor "Monitor0"
    DefaultDepth 24
    SubSection "Display"
    Depth 24
    EndSubSection
    EndSection
    Section "Screen"
    Identifier "Screen1"
    Device "Device1"
    Monitor "Monitor1"
    DefaultDepth 24
    SubSection "Display"
    Depth 24
    EndSubSection
    EndSection
    EDIT:
    I've tracked either the cause, or symptom of problem to some entries in journalctl. This seems to happen accross all KDE installations and is sporadic. When this behavious is present I also notice that double tapping the brightness buttons on keyboard causes the monitors to switch.
    Journalctl entries:
    May 09 14:27:07 ianarch dbus[344]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    May 09 14:27:07 ianarch org.kde.powerdevil.backlighthelper[1639]: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    May 09 14:27:07 ianarch dbus-daemon[344]: dbus[344]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    May 09 14:27:07 ianarch dbus[344]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    May 09 14:29:57 ianarch dbus-daemon[344]: dbus[344]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    May 09 14:29:57 ianarch dbus[344]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    May 09 14:29:57 ianarch org.kde.powerdevil.backlighthelper[1648]: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    May 09 14:29:57 ianarch dbus-daemon[344]: dbus[344]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    May 09 14:29:57 ianarch dbus[344]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    May 09 14:30:11 ianarch dbus-daemon[344]: dbus[344]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    May 09 14:30:11 ianarch dbus[344]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    May 09 14:30:11 ianarch org.kde.powerdevil.backlighthelper[1654]: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    May 09 14:30:11 ianarch dbus[344]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    May 09 14:30:11 ianarch dbus-daemon[344]: dbus[344]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    May 09 14:31:30 ianarch dbus-daemon[344]: dbus[344]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    May 09 14:31:30 ianarch dbus[344]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
    May 09 14:31:30 ianarch org.kde.powerdevil.backlighthelper[1667]: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
    May 09 14:31:30 ianarch dbus-daemon[344]: dbus[344]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    May 09 14:31:30 ianarch dbus[344]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
    Last edited by Hutchism (2013-05-30 14:28:12)

    Ok, I'm still in KDE at the moment as I had quite a bit to do and e17 was slowing me down.
    Here's an updated xorg log. Scroll down to the bottom to see the random display changes. They're in the log, but no sign of what calls it...
    [ 45574.101]
    X.Org X Server 1.14.1
    Release Date: 2013-04-17
    [ 45574.101] X Protocol Version 11, Revision 0
    [ 45574.101] Build Operating System: Linux 3.8.7-1-ARCH x86_64
    [ 45574.101] Current Operating System: Linux ianarch 3.9.0-2-ARCH #1 SMP PREEMPT Tue Apr 30 09:48:29 CEST 2013 x86_64
    [ 45574.101] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=5c06846e-4730-4382-afa1-3b2bdea7d716 ro quiet
    [ 45574.101] Build Date: 17 April 2013 02:37:06PM
    [ 45574.101]
    [ 45574.101] Current version of pixman: 0.28.2
    [ 45574.101] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 45574.101] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 45574.101] (==) Log file: "/var/log/Xorg.0.log", Time: Wed May 8 09:03:03 2013
    [ 45574.132] (==) Using config file: "/etc/X11/xorg.conf"
    [ 45574.132] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 45574.180] (==) ServerLayout "Layout0"
    [ 45574.180] (**) |-->Screen "Screen0" (0)
    [ 45574.180] (**) | |-->Monitor "Monitor0"
    [ 45574.180] (**) | |-->Device "Device0"
    [ 45574.180] (**) |-->Input Device "Keyboard0"
    [ 45574.180] (**) |-->Input Device "Mouse0"
    [ 45574.180] (**) Option "Xinerama" "0"
    [ 45574.180] (==) Automatically adding devices
    [ 45574.180] (==) Automatically enabling devices
    [ 45574.180] (==) Automatically adding GPU devices
    [ 45574.180] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 45574.180] Entry deleted from font path.
    [ 45574.245] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 45574.245] Entry deleted from font path.
    [ 45574.245] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 45574.245] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/
    [ 45574.245] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 45574.245] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    [ 45574.245] (WW) Disabling Keyboard0
    [ 45574.245] (WW) Disabling Mouse0
    [ 45574.245] (II) Loader magic: 0x7fcc20
    [ 45574.245] (II) Module ABI versions:
    [ 45574.245] X.Org ANSI C Emulation: 0.4
    [ 45574.245] X.Org Video Driver: 14.1
    [ 45574.245] X.Org XInput driver : 19.1
    [ 45574.246] X.Org Server Extension : 7.0
    [ 45574.246] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 45574.249] (--) PCI:*(0:2:0:0) 10de:0df2:1028:046e rev 161, Mem @ 0xcc000000/16777216, 0xd0000000/268435456, 0xce000000/33554432, I/O @ 0x00002000/128, BIOS @ 0x????????/524288
    [ 45574.249] Initializing built-in extension Generic Event Extension
    [ 45574.249] Initializing built-in extension SHAPE
    [ 45574.249] Initializing built-in extension MIT-SHM
    [ 45574.249] Initializing built-in extension XInputExtension
    [ 45574.249] Initializing built-in extension XTEST
    [ 45574.249] Initializing built-in extension BIG-REQUESTS
    [ 45574.249] Initializing built-in extension SYNC
    [ 45574.249] Initializing built-in extension XKEYBOARD
    [ 45574.249] Initializing built-in extension XC-MISC
    [ 45574.249] Initializing built-in extension SECURITY
    [ 45574.249] Initializing built-in extension XINERAMA
    [ 45574.249] Initializing built-in extension XFIXES
    [ 45574.264] Initializing built-in extension RENDER
    [ 45574.264] Initializing built-in extension RANDR
    [ 45574.264] Initializing built-in extension COMPOSITE
    [ 45574.264] Initializing built-in extension DAMAGE
    [ 45574.264] Initializing built-in extension MIT-SCREEN-SAVER
    [ 45574.264] Initializing built-in extension DOUBLE-BUFFER
    [ 45574.264] Initializing built-in extension RECORD
    [ 45574.264] Initializing built-in extension DPMS
    [ 45574.264] Initializing built-in extension X-Resource
    [ 45574.264] Initializing built-in extension XVideo
    [ 45574.264] Initializing built-in extension XVideo-MotionCompensation
    [ 45574.264] Initializing built-in extension XFree86-VidModeExtension
    [ 45574.264] Initializing built-in extension XFree86-DGA
    [ 45574.264] Initializing built-in extension XFree86-DRI
    [ 45574.265] Initializing built-in extension DRI2
    [ 45574.265] (II) LoadModule: "glx"
    [ 45574.331] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 45574.495] (II) Module glx: vendor="NVIDIA Corporation"
    [ 45574.495] compiled for 4.0.2, module version = 1.0.0
    [ 45574.495] Module class: X.Org Server Extension
    [ 45574.495] (II) NVIDIA GLX Module 319.17 Thu Apr 25 21:41:50 PDT 2013
    [ 45574.495] Loading extension GLX
    [ 45574.495] (II) LoadModule: "nvidia"
    [ 45574.652] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 45574.700] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 45574.700] compiled for 4.0.2, module version = 1.0.0
    [ 45574.700] Module class: X.Org Video Driver
    [ 45574.745] (II) NVIDIA dlloader X Driver 319.17 Thu Apr 25 21:23:57 PDT 2013
    [ 45574.745] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 45574.745] (++) using VT number 7
    [ 45574.747] (II) Loading sub module "fb"
    [ 45574.747] (II) LoadModule: "fb"
    [ 45574.747] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 45574.811] (II) Module fb: vendor="X.Org Foundation"
    [ 45574.811] compiled for 1.14.1, module version = 1.0.0
    [ 45574.811] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 45574.811] (WW) Unresolved symbol: fbGetGCPrivateKey
    [ 45574.811] (II) Loading sub module "wfb"
    [ 45574.811] (II) LoadModule: "wfb"
    [ 45574.811] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 45574.835] (II) Module wfb: vendor="X.Org Foundation"
    [ 45574.835] compiled for 1.14.1, module version = 1.0.0
    [ 45574.835] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 45574.835] (II) Loading sub module "shadow"
    [ 45574.835] (II) LoadModule: "shadow"
    [ 45574.856] (II) Loading /usr/lib/xorg/modules/libshadow.so
    [ 45574.856] (II) Module shadow: vendor="X.Org Foundation"
    [ 45574.856] compiled for 1.14.1, module version = 1.1.0
    [ 45574.856] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 45574.856] (II) Loading sub module "ramdac"
    [ 45574.856] (II) LoadModule: "ramdac"
    [ 45574.856] (II) Module "ramdac" already built-in
    [ 45574.856] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
    [ 45574.856] (==) NVIDIA(0): RGB weight 888
    [ 45574.856] (==) NVIDIA(0): Default visual is TrueColor
    [ 45574.856] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 45574.856] (**) NVIDIA(0): Option "Stereo" "0"
    [ 45574.856] (**) NVIDIA(0): Option "nvidiaXineramaInfoOrder" "DFP-0"
    [ 45574.856] (**) NVIDIA(0): Option "UseEdidDpi" "FALSE"
    [ 45574.856] (**) NVIDIA(0): Option "DPI" "96 x 96"
    [ 45574.856] (**) NVIDIA(0): Stereo disabled by request
    [ 45574.856] (**) NVIDIA(0): Option "MetaModes" "DFP-0: nvidia-auto-select +0+0, DFP-3: 1920x1080 +1920+0"
    [ 45574.856] (**) NVIDIA(0): Enabling 2D acceleration
    [ 45575.121] (II) NVIDIA(GPU-0): Display (AU Optronics Corporation (DFP-0)) does not support
    [ 45575.121] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
    [ 45575.121] (WW) NVIDIA(GPU-0): Unable to read EDID for display device DFP-3
    [ 45575.126] (II) NVIDIA(GPU-0): Display (DELL U2311H (DFP-3)) does not support NVIDIA 3D
    [ 45575.126] (II) NVIDIA(GPU-0): Vision stereo.
    [ 45575.128] (II) NVIDIA(0): NVIDIA GPU GeForce GT 435M (GF108) at PCI:2:0:0 (GPU-0)
    [ 45575.128] (--) NVIDIA(0): Memory: 2097152 kBytes
    [ 45575.128] (--) NVIDIA(0): VideoBIOS: 70.08.19.00.5d
    [ 45575.128] (II) NVIDIA(0): Detected PCI Express Link width: 16X
    [ 45575.150] (II) NVIDIA(GPU-0): Display (DELL U2311H (DFP-3)) does not support NVIDIA 3D
    [ 45575.150] (II) NVIDIA(GPU-0): Vision stereo.
    [ 45575.150] (--) NVIDIA(0): Valid display device(s) on GeForce GT 435M at PCI:2:0:0
    [ 45575.150] (--) NVIDIA(0): AU Optronics Corporation (DFP-0) (boot, connected)
    [ 45575.150] (--) NVIDIA(0): DFP-1
    [ 45575.150] (--) NVIDIA(0): DFP-2
    [ 45575.150] (--) NVIDIA(0): DELL U2311H (DFP-3) (connected)
    [ 45575.150] (--) NVIDIA(0): AU Optronics Corporation (DFP-0): 330.0 MHz maximum pixel clock
    [ 45575.150] (--) NVIDIA(0): AU Optronics Corporation (DFP-0): Internal Dual Link LVDS
    [ 45575.150] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
    [ 45575.150] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
    [ 45575.150] (--) NVIDIA(0): DFP-2: 165.0 MHz maximum pixel clock
    [ 45575.150] (--) NVIDIA(0): DFP-2: Internal Single Link TMDS
    [ 45575.150] (--) NVIDIA(0): DELL U2311H (DFP-3): 480.0 MHz maximum pixel clock
    [ 45575.150] (--) NVIDIA(0): DELL U2311H (DFP-3): Internal DisplayPort
    [ 45575.150] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 45575.150] (**) NVIDIA(0): device AU Optronics Corporation (DFP-0) (Using EDID
    [ 45575.150] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
    [ 45575.150] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 45575.150] (**) NVIDIA(0): device DELL U2311H (DFP-3) (Using EDID frequencies has
    [ 45575.150] (**) NVIDIA(0): been enabled on all display devices.)
    [ 45575.151] (II) NVIDIA(0): Validated MetaModes:
    [ 45575.151] (II) NVIDIA(0): "DFP-0:nvidia-auto-select+0+0,DFP-3:1920x1080+1920+0"
    [ 45575.151] (II) NVIDIA(0): Virtual screen size determined to be 3840 x 1080
    [ 45576.221] (**) NVIDIA(0): DPI set to (96, 96); computed from "DPI" X config option
    [ 45576.221] (--) Depth 24 pixmap format is 32 bpp
    [ 45576.221] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
    [ 45576.221] (II) NVIDIA: access.
    [ 45576.325] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
    [ 45576.325] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
    [ 45576.325] (II) NVIDIA(0): configuration option may not be set correctly. When the
    [ 45576.325] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
    [ 45576.326] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
    [ 45576.326] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
    [ 45576.326] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
    [ 45576.326] (II) NVIDIA(0): Config Options in the README.
    [ 45576.347] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select+0+0,DFP-3:1920x1080+1920+0"
    [ 45576.690] Loading extension NV-GLX
    [ 45576.789] (==) NVIDIA(0): Disabling shared memory pixmaps
    [ 45576.789] (==) NVIDIA(0): Backing store disabled
    [ 45576.789] (==) NVIDIA(0): Silken mouse enabled
    [ 45576.789] (**) NVIDIA(0): DPMS enabled
    [ 45576.797] Loading extension NV-CONTROL
    [ 45576.797] Loading extension XINERAMA
    [ 45576.797] (II) Loading sub module "dri2"
    [ 45576.797] (II) LoadModule: "dri2"
    [ 45576.797] (II) Module "dri2" already built-in
    [ 45576.801] (II) NVIDIA(0): [DRI2] Setup complete
    [ 45576.801] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
    [ 45576.801] (--) RandR disabled
    [ 45576.805] (II) Initializing extension GLX
    [ 45577.087] (II) config/udev: Adding input device Power Button (/dev/input/event6)
    [ 45577.087] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 45577.087] (II) LoadModule: "evdev"
    [ 45577.087] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 45577.095] (II) Module evdev: vendor="X.Org Foundation"
    [ 45577.095] compiled for 1.14.0, module version = 2.8.0
    [ 45577.095] Module class: X.Org XInput Driver
    [ 45577.095] ABI class: X.Org XInput driver, version 19.1
    [ 45577.095] (II) Using input driver 'evdev' for 'Power Button'
    [ 45577.095] (**) Power Button: always reports core events
    [ 45577.095] (**) evdev: Power Button: Device: "/dev/input/event6"
    [ 45577.096] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 45577.096] (--) evdev: Power Button: Found keys
    [ 45577.096] (II) evdev: Power Button: Configuring as keyboard
    [ 45577.096] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event6"
    [ 45577.096] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 45577.096] (**) Option "xkb_rules" "evdev"
    [ 45577.096] (**) Option "xkb_model" "evdev"
    [ 45577.096] (**) Option "xkb_layout" "us"
    [ 45577.131] (II) config/udev: Adding input device Video Bus (/dev/input/event2)
    [ 45577.131] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 45577.131] (II) Using input driver 'evdev' for 'Video Bus'
    [ 45577.131] (**) Video Bus: always reports core events
    [ 45577.131] (**) evdev: Video Bus: Device: "/dev/input/event2"
    [ 45577.131] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [ 45577.131] (--) evdev: Video Bus: Found keys
    [ 45577.131] (II) evdev: Video Bus: Configuring as keyboard
    [ 45577.131] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input2/event2"
    [ 45577.131] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
    [ 45577.131] (**) Option "xkb_rules" "evdev"
    [ 45577.131] (**) Option "xkb_model" "evdev"
    [ 45577.131] (**) Option "xkb_layout" "us"
    [ 45577.132] (II) config/udev: Adding input device Power Button (/dev/input/event3)
    [ 45577.132] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 45577.132] (II) Using input driver 'evdev' for 'Power Button'
    [ 45577.132] (**) Power Button: always reports core events
    [ 45577.132] (**) evdev: Power Button: Device: "/dev/input/event3"
    [ 45577.132] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 45577.132] (--) evdev: Power Button: Found keys
    [ 45577.132] (II) evdev: Power Button: Configuring as keyboard
    [ 45577.132] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event3"
    [ 45577.132] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
    [ 45577.132] (**) Option "xkb_rules" "evdev"
    [ 45577.132] (**) Option "xkb_model" "evdev"
    [ 45577.132] (**) Option "xkb_layout" "us"
    [ 45577.133] (II) config/udev: Adding input device Lid Switch (/dev/input/event5)
    [ 45577.133] (II) No input driver specified, ignoring this device.
    [ 45577.133] (II) This device may have been added with another device file.
    [ 45577.134] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
    [ 45577.134] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
    [ 45577.134] (II) Using input driver 'evdev' for 'Sleep Button'
    [ 45577.134] (**) Sleep Button: always reports core events
    [ 45577.134] (**) evdev: Sleep Button: Device: "/dev/input/event4"
    [ 45577.134] (--) evdev: Sleep Button: Vendor 0 Product 0x3
    [ 45577.134] (--) evdev: Sleep Button: Found keys
    [ 45577.134] (II) evdev: Sleep Button: Configuring as keyboard
    [ 45577.134] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4/event4"
    [ 45577.134] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
    [ 45577.134] (**) Option "xkb_rules" "evdev"
    [ 45577.134] (**) Option "xkb_model" "evdev"
    [ 45577.134] (**) Option "xkb_layout" "us"
    [ 45577.135] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 45577.135] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event13)
    [ 45577.135] (II) No input driver specified, ignoring this device.
    [ 45577.135] (II) This device may have been added with another device file.
    [ 45577.135] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event14)
    [ 45577.135] (II) No input driver specified, ignoring this device.
    [ 45577.135] (II) This device may have been added with another device file.
    [ 45577.136] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event15)
    [ 45577.136] (II) No input driver specified, ignoring this device.
    [ 45577.136] (II) This device may have been added with another device file.
    [ 45577.136] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event16)
    [ 45577.136] (II) No input driver specified, ignoring this device.
    [ 45577.136] (II) This device may have been added with another device file.
    [ 45577.136] (II) config/udev: Adding input device Laptop_Integrated_Webcam_2HDM (/dev/input/event17)
    [ 45577.136] (**) Laptop_Integrated_Webcam_2HDM: Applying InputClass "evdev keyboard catchall"
    [ 45577.136] (II) Using input driver 'evdev' for 'Laptop_Integrated_Webcam_2HDM'
    [ 45577.136] (**) Laptop_Integrated_Webcam_2HDM: always reports core events
    [ 45577.136] (**) evdev: Laptop_Integrated_Webcam_2HDM: Device: "/dev/input/event17"
    [ 45577.136] (--) evdev: Laptop_Integrated_Webcam_2HDM: Vendor 0x408 Product 0x2fb1
    [ 45577.136] (--) evdev: Laptop_Integrated_Webcam_2HDM: Found keys
    [ 45577.136] (II) evdev: Laptop_Integrated_Webcam_2HDM: Configuring as keyboard
    [ 45577.136] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input17/event17"
    [ 45577.136] (II) XINPUT: Adding extended input device "Laptop_Integrated_Webcam_2HDM" (type: KEYBOARD, id 10)
    [ 45577.136] (**) Option "xkb_rules" "evdev"
    [ 45577.136] (**) Option "xkb_model" "evdev"
    [ 45577.136] (**) Option "xkb_layout" "us"
    [ 45577.137] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
    [ 45577.137] (II) No input driver specified, ignoring this device.
    [ 45577.137] (II) This device may have been added with another device file.
    [ 45577.137] (II) config/udev: Adding input device HDA Intel MID Headphone (/dev/input/event10)
    [ 45577.137] (II) No input driver specified, ignoring this device.
    [ 45577.137] (II) This device may have been added with another device file.
    [ 45577.138] (II) config/udev: Adding input device HDA Intel MID Headphone (/dev/input/event11)
    [ 45577.138] (II) No input driver specified, ignoring this device.
    [ 45577.138] (II) This device may have been added with another device file.
    [ 45577.138] (II) config/udev: Adding input device HDA Intel MID Mic (/dev/input/event9)
    [ 45577.138] (II) No input driver specified, ignoring this device.
    [ 45577.138] (II) This device may have been added with another device file.
    [ 45577.139] (II) config/udev: Adding input device Logitech Gaming Mouse G400 (/dev/input/event1)
    [ 45577.139] (**) Logitech Gaming Mouse G400: Applying InputClass "evdev pointer catchall"
    [ 45577.139] (II) Using input driver 'evdev' for 'Logitech Gaming Mouse G400'
    [ 45577.139] (**) Logitech Gaming Mouse G400: always reports core events
    [ 45577.139] (**) evdev: Logitech Gaming Mouse G400: Device: "/dev/input/event1"
    [ 45577.139] (--) evdev: Logitech Gaming Mouse G400: Vendor 0x46d Product 0xc245
    [ 45577.139] (--) evdev: Logitech Gaming Mouse G400: Found 12 mouse buttons
    [ 45577.139] (--) evdev: Logitech Gaming Mouse G400: Found scroll wheel(s)
    [ 45577.139] (--) evdev: Logitech Gaming Mouse G400: Found relative axes
    [ 45577.139] (--) evdev: Logitech Gaming Mouse G400: Found x and y relative axes
    [ 45577.139] (II) evdev: Logitech Gaming Mouse G400: Configuring as mouse
    [ 45577.139] (II) evdev: Logitech Gaming Mouse G400: Adding scrollwheel support
    [ 45577.139] (**) evdev: Logitech Gaming Mouse G400: YAxisMapping: buttons 4 and 5
    [ 45577.139] (**) evdev: Logitech Gaming Mouse G400: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 45577.139] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb2/2-2/2-2.4/2-2.4:1.0/input/input20/event1"
    [ 45577.139] (II) XINPUT: Adding extended input device "Logitech Gaming Mouse G400" (type: MOUSE, id 11)
    [ 45577.139] (II) evdev: Logitech Gaming Mouse G400: initialized for relative axes.
    [ 45577.140] (**) Logitech Gaming Mouse G400: (accel) keeping acceleration scheme 1
    [ 45577.140] (**) Logitech Gaming Mouse G400: (accel) acceleration profile 0
    [ 45577.140] (**) Logitech Gaming Mouse G400: (accel) acceleration factor: 2.000
    [ 45577.140] (**) Logitech Gaming Mouse G400: (accel) acceleration threshold: 4
    [ 45577.140] (II) config/udev: Adding input device Logitech Gaming Mouse G400 (/dev/input/mouse0)
    [ 45577.140] (II) No input driver specified, ignoring this device.
    [ 45577.140] (II) This device may have been added with another device file.
    [ 45577.141] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 45577.141] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 45577.141] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 45577.141] (**) AT Translated Set 2 keyboard: always reports core events
    [ 45577.141] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 45577.141] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [ 45577.141] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [ 45577.141] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [ 45577.141] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 45577.141] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
    [ 45577.141] (**) Option "xkb_rules" "evdev"
    [ 45577.141] (**) Option "xkb_model" "evdev"
    [ 45577.141] (**) Option "xkb_layout" "us"
    [ 45577.142] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event12)
    [ 45577.142] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
    [ 45577.142] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
    [ 45577.142] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
    [ 45577.142] (II) LoadModule: "synaptics"
    [ 45577.142] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 45577.155] (II) Module synaptics: vendor="X.Org Foundation"
    [ 45577.156] compiled for 1.14.0, module version = 1.7.0
    [ 45577.156] Module class: X.Org XInput Driver
    [ 45577.156] ABI class: X.Org XInput driver, version 19.1
    [ 45577.156] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
    [ 45577.156] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 45577.156] (**) Option "Device" "/dev/input/event12"
    [ 45577.182] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
    [ 45577.182] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5398 (res 42)
    [ 45577.182] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4728 (res 70)
    [ 45577.182] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
    [ 45577.182] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
    [ 45577.182] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
    [ 45577.182] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
    [ 45577.182] (**) Option "TapButton1" "1"
    [ 45577.182] (**) Option "TapButton2" "2"
    [ 45577.182] (**) Option "TapButton3" "3"
    [ 45577.182] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 45577.182] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 45577.185] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input12/event12"
    [ 45577.185] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
    [ 45577.185] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
    [ 45577.185] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
    [ 45577.185] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.039
    [ 45577.186] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
    [ 45577.186] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
    [ 45577.186] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
    [ 45577.186] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
    [ 45577.186] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 45577.186] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
    [ 45577.186] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
    [ 45577.187] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event7)
    [ 45577.187] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
    [ 45577.187] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
    [ 45577.187] (**) Dell WMI hotkeys: always reports core events
    [ 45577.187] (**) evdev: Dell WMI hotkeys: Device: "/dev/input/event7"
    [ 45577.187] (--) evdev: Dell WMI hotkeys: Vendor 0 Product 0
    [ 45577.187] (--) evdev: Dell WMI hotkeys: Found keys
    [ 45577.187] (II) evdev: Dell WMI hotkeys: Configuring as keyboard
    [ 45577.187] (**) Option "config_info" "udev:/sys/devices/virtual/input/input7/event7"
    [ 45577.187] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 14)
    [ 45577.187] (**) Option "xkb_rules" "evdev"
    [ 45577.187] (**) Option "xkb_model" "evdev"
    [ 45577.187] (**) Option "xkb_layout" "us"
    [ 45614.071] (II) NVIDIA(GPU-0): Display (AU Optronics Corporation (DFP-0)) does not support
    [ 45614.071] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
    [ 45614.072] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 45614.072] (**) NVIDIA(0): device AU Optronics Corporation (DFP-0) (Using EDID
    [ 45614.072] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
    [ 45614.072] (II) NVIDIA(GPU-0): Display (DELL U2311H (DFP-3)) does not support NVIDIA 3D
    [ 45614.072] (II) NVIDIA(GPU-0): Vision stereo.
    [ 45614.072] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 45614.072] (**) NVIDIA(0): device DELL U2311H (DFP-3) (Using EDID frequencies has
    [ 45614.072] (**) NVIDIA(0): been enabled on all display devices.)
    [ 45738.889] (II) NVIDIA(GPU-0): Display (AU Optronics Corporation (DFP-0)) does not support
    [ 45738.889] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
    [ 45738.889] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 45738.889] (**) NVIDIA(0): device AU Optronics Corporation (DFP-0) (Using EDID
    [ 45738.889] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
    [ 45738.890] (II) NVIDIA(GPU-0): Display (DELL U2311H (DFP-3)) does not support NVIDIA 3D
    [ 45738.890] (II) NVIDIA(GPU-0): Vision stereo.
    [ 45738.890] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 45738.890] (**) NVIDIA(0): device DELL U2311H (DFP-3) (Using EDID frequencies has
    [ 45738.890] (**) NVIDIA(0): been enabled on all display devices.)
    [ 45738.958] (II) NVIDIA(GPU-0): Display (AU Optronics Corporation (DFP-0)) does not support
    [ 45738.958] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
    [ 45738.958] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 45738.958] (**) NVIDIA(0): device AU Optronics Corporation (DFP-0) (Using EDID
    [ 45738.958] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
    [ 45738.958] (II) NVIDIA(GPU-0): Display (DELL U2311H (DFP-3)) does not support NVIDIA 3D
    [ 45738.958] (II) NVIDIA(GPU-0): Vision stereo.
    [ 45738.958] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 45738.958] (**) NVIDIA(0): device DELL U2311H (DFP-3) (Using EDID frequencies has
    [ 45738.958] (**) NVIDIA(0): been enabled on all display devices.)
    [ 45738.984] (II) NVIDIA(GPU-0): Display (AU Optronics Corporation (DFP-0)) does not support
    [ 45738.984] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
    [ 45738.984] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 45738.984] (**) NVIDIA(0): device AU Optronics Corporation (DFP-0) (Using EDID
    [ 45738.984] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
    [ 45738.984] (II) NVIDIA(GPU-0): Display (DELL U2311H (DFP-3)) does not support NVIDIA 3D
    [ 45738.984] (II) NVIDIA(GPU-0): Vision stereo.
    [ 45738.984] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 45738.984] (**) NVIDIA(0): device DELL U2311H (DFP-3) (Using EDID frequencies has
    [ 45738.984] (**) NVIDIA(0): been enabled on all display devices.)
    [ 45739.077] (II) NVIDIA(0): Setting mode "LVDS-0: nvidia-auto-select @1920x1080 +0+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}"
    [ 45740.602] (II) NVIDIA(GPU-0): Display (AU Optronics Corporation (DFP-0)) does not support
    [ 45740.602] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
    [ 45740.602] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 45740.602] (**) NVIDIA(0): device AU Optronics Corporation (DFP-0) (Using EDID
    [ 45740.602] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
    [ 45740.603] (II) NVIDIA(GPU-0): Display (DELL U2311H (DFP-3)) does not support NVIDIA 3D
    [ 45740.603] (II) NVIDIA(GPU-0): Vision stereo.
    [ 45740.603] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 45740.603] (**) NVIDIA(0): device DELL U2311H (DFP-3) (Using EDID frequencies has
    [ 45740.603] (**) NVIDIA(0): been enabled on all display devices.)
    [ 45740.633] (II) NVIDIA(GPU-0): Display (AU Optronics Corporation (DFP-0)) does not support
    [ 45740.633] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
    [ 45740.633] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 45740.633] (**) NVIDIA(0): device AU Optronics Corporation (DFP-0) (Using EDID
    [ 45740.633] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
    [ 45740.633] (II) NVIDIA(GPU-0): Display (DELL U2311H (DFP-3)) does not support NVIDIA 3D
    [ 45740.633] (II) NVIDIA(GPU-0): Vision stereo.
    [ 45740.633] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 45740.633] (**) NVIDIA(0): device DELL U2311H (DFP-3) (Using EDID frequencies has
    [ 45740.633] (**) NVIDIA(0): been enabled on all display devices.)
    [ 45740.644] (II) NVIDIA(GPU-0): Display (AU Optronics Corporation (DFP-0)) does not support
    [ 45740.644] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
    [ 45740.644] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 45740.644] (**) NVIDIA(0): device AU Optronics Corporation (DFP-0) (Using EDID
    [ 45740.644] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
    [ 45740.645] (II) NVIDIA(GPU-0): Display (DELL U2311H (DFP-3)) does not support NVIDIA 3D
    [ 45740.645] (II) NVIDIA(GPU-0): Vision stereo.
    [ 45740.645] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 45740.645] (**) NVIDIA(0): device DELL U2311H (DFP-3) (Using EDID frequencies has
    [ 45740.645] (**) NVIDIA(0): been enabled on all display devices.)
    [ 45740.652] (II) NVIDIA(GPU-0): Display (AU Optronics Corporation (DFP-0)) does not support
    [ 45740.652] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
    [ 45740.652] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 45740.652] (**) NVIDIA(0): device AU Optronics Corporation (DFP-0) (Using EDID
    [ 45740.652] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
    [ 45740.653] (II) NVIDIA(GPU-0): Display (DELL U2311H (DFP-3)) does not support NVIDIA 3D
    [ 45740.653] (II) NVIDIA(GPU-0): Vision stereo.
    [ 45740.653] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 45740.653] (**) NVIDIA(0): device DELL U2311H (DFP-3) (Using EDID frequencies has
    [ 45740.653] (**) NVIDIA(0): been enabled on all display devices.)
    [ 45740.656] (II) NVIDIA(GPU-0): Display (AU Optronics Corporation (DFP-0)) does not support
    [ 45740.656] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
    [ 45740.656] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 45740.656] (**) NVIDIA(0): device AU Optronics Corporation (DFP-0) (Using EDID
    [ 45740.656] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
    [ 45740.657] (II) NVIDIA(GPU-0): Display (DELL U2311H (DFP-3)) does not support NVIDIA 3D
    [ 45740.657] (II) NVIDIA(GPU-0): Vision stereo.
    [ 45740.657] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 45740.657] (**) NVIDIA(0): device DELL U2311H (DFP-3) (Using EDID frequencies has
    [ 45740.657] (**) NVIDIA(0): been enabled on all display devices.)
    [ 45740.660] (II) NVIDIA(GPU-0): Display (AU Optronics Corporation (DFP-0)) does not support
    [ 45740.660] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
    [ 45740.660] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 45740.660] (**) NVIDIA(0): device AU Optronics Corporation (DFP-0) (Using EDID
    [ 45740.660] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
    [ 45740.661] (II) NVIDIA(GPU-0): Display (DELL U2311H (DFP-3)) does not support NVIDIA 3D
    [ 45740.661] (II) NVIDIA(GPU-0): Vision stereo.
    [ 45740.661] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 45740.661] (**) NVIDIA(0): device DELL U2311H (DFP-3) (Using EDID frequencies has
    [ 45740.661] (**) NVIDIA(0): been enabled on all display devices.)
    [ 45740.663] (II) NVIDIA(GPU-0): Display (AU Optronics Corporation (DFP-0)) does not support
    [ 45740.663] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
    [ 45740.663] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 45740.663] (**) NVIDIA(0): device AU Optronics Corporation (DFP-0) (Using EDID
    [ 45740.663] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
    [ 45740.664] (II) NVIDIA(GPU-0): Display (DELL U2311H (DFP-3)) does not support NVIDIA 3D
    [ 45740.664] (II) NVIDIA(GPU-0): Vision stereo.
    [ 45740.664] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 45740.664] (**) NVIDIA(0): device DELL U2311H (DFP-3) (Using EDID frequencies has
    [ 45740.664] (**) NVIDIA(0): been enabled on all display devices.)
    [ 45740.667] (II) NVIDIA(GPU-0): Display (AU Optronics Corporation (DFP-0)) does not support
    [ 45740.667] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
    [ 45740.667] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 45740.667] (**) NVIDIA(0): device AU Optronics Corporation (DFP-0) (Using EDID
    [ 45740.667] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
    [ 45740.672] (II) NVIDIA(GPU-0): Display (DELL U2311H (DFP-3)) does not support NVIDIA 3D
    [ 45740.672] (II) NVIDIA(GPU-0): Vision stereo.
    [ 45740.672] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 45740.672] (**) NVIDIA(0): device DELL U2311H (DFP-3) (Using EDID frequencies has
    [ 45740.672] (**) NVIDIA(0): been enabled on all display devices.)
    [ 45740.681] (II) NVIDIA(GPU-0): Display (AU Optronics Corporation (DFP-0)) does not support
    [ 45740.681] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
    [ 45740.681] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 45740.681] (**) NVIDIA(0): device AU Optronics Corporation (DFP-0) (Using EDID
    [ 45740.681] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
    [ 45740.686] (II) NVIDIA(GPU-0): Display (DELL U2311H (DFP-3)) does not support NVIDIA 3D
    [ 45740.686] (II) NVIDIA(GPU-0): Vision stereo.
    [ 45740.686] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 45740.686] (**) NVIDIA(0): device DELL U2311H (DFP-3) (Using EDID frequencies has
    [ 45740.686] (**) NVIDIA(0): been enabled on all display devices.)
    [ 45740.693] (II) NVIDIA(GPU-0): Display (AU Optronics Corporation (DFP-0)) does not support
    [ 45740.693] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
    [ 45740.693] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 45740.693] (**) NVIDIA(0): device AU Optronics Corporation (DFP-0) (Using EDID
    [ 45740.693] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
    [ 45740.693] (II) NVIDIA(GPU-0): Display (DELL U2311H (DFP-3)) does not support NVIDIA 3D
    [ 45740.693] (II) NVIDIA(GPU-0): Vision stereo.
    [ 45740.694] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 45740.694] (**) NVIDIA(0): device DELL U2311H (DFP-3) (Using EDID frequencies has
    [ 45740.694] (**) NVIDIA(0): been enabled on all display devices.)
    [ 45963.920] (II) NVIDIA(GPU-0): Display (AU Optronics Corporation (DFP-0)) does not support
    [ 45963.920] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
    [ 45963.920] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 45963.920] (**) NVIDIA(0): device AU Optronics Corporation (DFP-0) (Using EDID
    [ 45963.920] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
    [ 45963.920] (II) NVIDIA(GPU-0): Display (DELL U2311H (DFP-3)) does not support NVIDIA 3D
    [ 45963.920] (II) NVIDIA(GPU-0): Vision stereo.
    [ 45963.920] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 45963.920] (**) NVIDIA(0): device DELL U2311H (DFP-3) (Using EDID frequencies has
    [ 45963.920] (**) NVIDIA(0): been enabled on all display devices.)
    [ 45963.938] (II) NVIDIA(GPU-0): Display (AU Optronics Corporation (DFP-0)) does not support
    [ 45963.938] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
    [ 45963.938] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 45963.938] (**) NVIDIA(0): device AU Optronics Corporation (DFP-0) (Using EDID
    [ 45963.938] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
    [ 45963.939] (II) NVIDIA(GPU-0): Display (DELL U2311H (DFP-3)) does not support NVIDIA 3D
    [ 45963.939] (II) NVIDIA(GPU-0): Vision stereo.
    [ 45963.939] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 45963.939] (**) NVIDIA(0): device DELL U2311H (DFP-3) (Using EDID frequencies has
    [ 45963.939] (**) NVIDIA(0): been enabled on all display devices.)
    [ 45964.051] (II) NVIDIA(0): Setting mode "LVDS-0: nvidia-auto-select @1920x1080 +0+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}, DP-1: nvidia-auto-select @1920x1080 +0+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}"
    [ 45965.538] (II) NVIDIA(GPU-0): Display (AU Optronics Corporation (DFP-0)) does not support
    [ 45965.538] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
    [ 45965.538] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 45965.538] (**) NVIDIA(0): device AU Optronics Corporation (DFP-0) (Using EDID
    [ 45965.538] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
    [ 45965.539] (II) NVIDIA(GPU-0): Display (DELL U2311H (DFP-3)) does not support NVIDIA 3D
    [ 45965.539] (II) NVIDIA(GPU-0): Vision stereo.
    [ 45965.539] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 45965.539] (**) NVIDIA(0): device DELL U2311H (DFP-3) (Using EDID frequencies has
    [ 45965.539] (**) NVIDIA(0): been enabled on all display devices.)
    [ 45965.554] (II) NVIDIA(0): Setting mode "DP-1: nvidia-auto-select @1920x1080 +0+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}"
    [ 45966.777] (II) NVIDIA(GPU-0): Display (AU Optronics Corporation (DFP-0)) does not support
    [ 45966.777] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
    [ 45966.777] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 45966.777] (**) NVIDIA(0): device AU Optronics Corporation (DFP-0) (Using EDID
    [ 45966.777] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
    [ 45966.777] (II) NVIDIA(GPU-0): Display (DELL U2311H (DFP-3)) does not support NVIDIA 3D
    [ 45966.777] (II) NVIDIA(GPU-0): Vision stereo.
    [ 45966.777] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 45966.777] (**) NVIDIA(0): device DELL U2311H (DFP-3) (Using EDID frequencies has
    [ 45966.777] (**) NVIDIA(0): been enabled on all display devices.)
    [ 45966.792] (II) NVIDIA(GPU-0): Display (AU Optronics Corporation (DFP-0)) does not support
    [ 45966.792] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
    [ 45966.792] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 45966.792] (**) NVIDIA(0): device AU Optronics Corporation (DFP-0) (Using EDID
    [ 45966.792] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
    [ 45966.792] (II) NVIDIA(GPU-0): Display (DELL U2311H (DFP-3)) does not support NVIDIA 3D
    [ 45966.792] (II) NVIDIA(GPU-0): Vision stereo.
    [ 45966.792] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 45966.792] (**) NVIDIA(0): device DELL U2311H (DFP-3) (Using EDID frequencies has
    [ 45966.792] (**) NVIDIA(0): been enabled on all display devices.)
    [ 45966.799] (II) NVIDIA(GPU-0): Display (AU Optronics Corporation (DFP-0)) does not support
    [ 45966.799] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
    [ 45966.799] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 45966.799] (**) NVIDIA(0): device AU Optronics Corporation (DFP-0) (Using EDID
    [ 45966.799] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
    [ 45966.800] (II) NVIDIA(GPU-0): Display (DELL U2311H (DFP-3)) does not support NVIDIA 3D
    [ 45966.800] (II) NVIDIA(GPU-0): Vision stereo.
    [ 45966.800] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 45966.800] (**) NVIDIA(0): device DELL U2311H (DFP-3) (Using EDID frequencies has
    [ 45966.800] (**) NVIDIA(0): been enabled on all display devices.)
    [ 45966.804] (II) NVIDIA(GPU-0): Display (AU Optronics Corporation (DFP-0)) does not support
    [ 45966.804] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
    [ 45966.804] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 45966.804] (**) NVIDIA(0): device AU Optronics Corporation (DFP-0) (Using EDID
    [ 45966.804] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
    [ 45966.804] (II) NVIDIA(GPU-0): Display (DELL U2311H (DFP-3)) does not support NVIDIA 3D
    [ 45966.804] (II) NVIDIA(GPU-0): Vision stereo.
    [ 45966.804] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 45966.804] (**) NVIDIA(0): device DELL U2311H (DFP-3) (Using EDID frequencies has
    [ 45966.804] (**) NVIDIA(0): been enabled on all display devices.)
    [ 45966.807] (II) NVIDIA(GPU-0): Display (AU Optronics Corporation (DFP-0)) does not support
    [ 45966.807] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
    [ 45966.807] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 45966.807] (**) NVIDIA(0): device AU Optronics Corporation (DFP-0) (Using EDID
    [ 45966.807] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
    [ 45966.807] (II) NVIDIA(GPU-0): Display (DELL U2311H (DFP-3)) does not support NVIDIA 3D
    [ 45966.807] (II) NVIDIA(GPU-0): Vision stereo.
    [ 45966.807] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 45966.807] (**) NVIDIA(0): device DELL U2311H (DFP-3) (Using EDID frequencies has
    [ 45966.807] (**) NVIDIA(0): been enabled on all display devices.)
    [ 45966.811] (II) NVIDIA(GPU-0): Display (AU Optronics Corporation (DFP-0)) does not support
    [ 45966.811] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
    [ 45966.811] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 45966.811] (**) NVIDIA(0): device AU Optronics Corporation (DFP-0) (Using EDID
    [ 45966.811] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
    [ 45966.811] (II) NVIDIA(GPU-0): Display (DELL U2311H (DFP-3)) does not support NVIDIA 3D
    [ 45966.812] (II) NVIDIA(GPU-0): Vision stereo.
    [ 45966.812] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 45966.812] (**) NVIDIA(0): device DELL U2311H (DFP-3) (Using EDID frequencies has
    [ 45966.812] (**) NVIDIA(0): been enabled on all display devices.)
    [ 45966.814] (II) NVIDIA(GPU-0): Display (AU Optronics Corporation (DFP-0)) does not support
    [ 45966.814] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
    [ 45966.814] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 45966.814] (**) NVIDIA(0): device AU Optronics Corporation (DFP-0) (Using EDID
    [ 45966.814] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
    [ 45966.815] (II) NVIDIA(GPU-0): Display (DELL U2311H (DFP-3)) does not support NVIDIA 3D
    [ 45966.815] (II) NVIDIA(GPU-0): Vision stereo.
    [ 45966.815] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 45966.815] (**) NVIDIA(0): device DELL U2311H (DFP-3) (Using EDID frequencies has
    [ 45966.815] (**) NVIDIA(0): been enabled on all display devices.)
    [ 45966.818] (II) NVIDIA(GPU-0): Display (AU Optronics Corporation (DFP-0)) does not support
    [ 45966.818] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
    [ 45966.818] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 45966.818] (**) NVIDIA(0): device AU Optronics Corporation (DFP-0) (Using EDID
    [ 45966.818] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
    [ 45966.818] (II) NVIDIA(GPU-0): Display (DELL U2311H (DFP-3)) does not support NVIDIA 3D
    [ 45966.818] (II) NVIDIA(GPU-0): Vision stereo.
    [ 45966.818] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 45966.818] (**) NVIDIA(0): device DELL U2311H (DFP-3) (Using EDID frequencies has
    [ 45966.818] (**) NVIDIA(0): been enabled on all display devices.)
    [ 45966.823] (II) NVIDIA(GPU-0): Display (AU Optronics Corporation (DFP-0)) does not support
    [ 45966.823] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
    [ 45966.823] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 45966.823] (**) NVIDIA(0): device AU Optronics Corporation (DFP-0) (Using EDID
    [ 45966.823] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
    [ 45966.823] (II) NVIDIA(GPU-0): Display (DELL U2311H (DFP-3)) does not support NVIDIA 3D
    [ 45966.823] (II) NVIDIA(GPU-0): Vision stereo.
    [ 45966.823] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 45966.823] (**) NVIDIA(0): device DELL U2311H (DFP-3) (Using EDID frequencies has
    [ 45966.823] (**) NVIDIA(0): been enabled on all display devices.)
    [ 45966.826] (II) NVIDIA(GPU-0): Display (AU Optronics Corporation (DFP-0)) does not support
    [ 45966.826] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
    [ 45966.826] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 45966.826] (**) NVIDIA(0): device AU Optronics Corporation (DFP-0) (Using EDID
    [ 45966.826] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
    [ 45966.827] (II) NVIDIA(GPU-0): Display (DELL U2311H (DFP-3)) does not support NVIDIA 3D
    [ 45966.827] (II) NVIDIA(GPU-0): Vision stereo.
    [ 45966.827] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 45966.827] (**) NVIDIA(0): device DELL U2311H (DFP-3) (Using EDID frequencies has
    [ 45966.827] (**) NVIDIA(0): been enabled on all display devices.)
    [ 45966.829] (II) NVIDIA(GPU-0): Display (AU Optronics Corporation (DFP-0)) does not support
    [ 45966.829] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
    [ 45966.829] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 45966.829] (**) NVIDIA(0): device AU Optronics Corporation (DFP-0) (Using EDID
    [ 45966.829] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
    [ 45966.830] (II) NVIDIA(GPU-0): Display (DELL U2311H (DFP-3)) does not support NVIDIA 3D
    [ 45966.830] (II) NVIDIA(GPU-0): Vision stereo.
    [ 45966.830] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 45966.830] (**) NVIDIA(0): device DELL U2311H (DFP-3) (Using EDID frequencies has
    [ 45966.830] (**) NVIDIA(0): been enabled on all display devices.)
    [ 45966.837] (II) NVIDIA(GPU-0): Display (AU Optronics Corporation (DFP-0)) does not support
    [ 45966.837] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
    [ 45966.837] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 45966.837] (**) NVIDIA(0): device AU Optronics Corporation (DFP-0) (Using EDID
    [ 45966.837] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
    [ 45966.837] (II) NVIDIA(GPU-0): Display (DELL U2311H (DFP-3)) does not support NVIDIA 3D
    [ 45966.837] (II) NVIDIA(GPU-0): Vision stereo.
    [ 45966.837] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 45966.837] (**) NVIDIA(0): device DELL U2311H (DFP-3) (Using EDID frequencies has
    [ 45966.837] (**) NVIDIA(0): been enabled on all display devices.)
    [ 45966.839] (II) NVIDIA(GPU-0): Display (AU Optronics Corporation (DFP-0)) does not support
    [ 45966.839] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
    [ 45966.839] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 45966.839] (**) NVIDIA(0): device AU Optronics Corporation (DFP-0) (Using EDID
    [ 45966.839] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
    [ 45966.839] (II) NVIDIA(GPU-0): Display (DELL U2311H (DFP-3)) does not support NVIDIA 3D
    [ 45966.839] (II) NVIDIA(GPU-0): Vision stereo.
    [ 45966.839] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 45966.839] (**) NVIDIA(0): device DELL U2311H (DFP-3) (Using EDID frequencies has
    [ 45966.839] (**) NVIDIA(0): been enabled on all display devices.)
    [ 45966.842] (II) NVIDIA(GPU-0): Display (AU Optronics Corporation (DFP-0)) does not support
    [ 45966.842] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
    [ 45966.842] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 45966.842] (**) NVIDIA(0): device AU Optronics Corporation (DFP-0) (Using EDID
    [ 45966.842] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
    [ 45966.842] (II) NVIDIA(GPU-0): Display (DELL U2311H (DFP-3)) does not support NVIDIA 3D
    [ 45966.842] (II) NVIDIA(GPU-0): Vision stereo.
    [ 45966.842] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 45966.842] (**) NVIDIA(0): device DELL U2311H (DFP-3) (Using EDID frequencies has
    [ 45966.842] (**) NVIDIA(0): been enabled on all display devices.)
    [ 45966.846] (II) NVIDIA(GPU-0): Display (AU Optronics Corporation (DFP-0)) does not support
    [ 45966.846] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
    [ 45966.846] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 45966.846] (**) NVIDIA(0): device AU Optronics Corporation (DFP-0) (Using EDID
    [ 45966.846] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
    [ 45966.846] (II) NVIDIA(GPU-0): Display (DELL U2311H (DFP-3)) does not support NVIDIA 3D
    [ 45966.846] (II) NVIDIA(GPU-0): Vision stereo.
    [ 45966.846] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 45966.846] (**) NVIDIA(0): device DELL U2311H (DFP-3) (Using EDID frequencies has
    [ 45966.846] (**) NVIDIA(0): been enabled on all display devices.)
    [ 45966.849] (II) NVIDIA(GPU-0): Display (AU Optronics Corporation (DFP-0)) does not support
    [ 45966.849] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
    [ 45966.849] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 45966.849] (**) NVIDIA(0): device AU Optronics Corporation (DFP-0) (Using EDID
    [ 45966.849] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
    [ 45966.850] (II) NVIDIA(GPU-0): Display (DELL U2311H (DFP-3)) does not support NVIDIA 3D
    [ 45966.850] (II) NVIDIA(GPU-0): Vision stereo.
    [ 45966.850] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 45966.850] (**) NVIDIA(0): device DELL U2311H (DFP-3) (Using EDID frequencies has
    [ 45966.850] (**) NVIDIA(0): been enabled on all display devices.)
    [ 46113.976] (II) NVIDIA(GPU-0): Display (AU Optronics Corporation (DFP-0)) does not support
    [ 46113.976] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
    [ 46113.976] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 46113.976] (**) NVIDIA(0): device AU Optronics Corporation (DFP-0) (Using EDID
    [ 46113.976] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
    [ 46113.977] (II) NVIDIA(GPU-0): Display (DELL U2311H (DFP-3)) does not support NVIDIA 3D
    [ 46113.977] (II) NVIDIA(GPU-0): Vision stereo.
    [ 46113.977] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 46113.977] (**) NVIDIA(0): device DELL U2311H (DFP-3) (Using EDID frequencies has
    [ 46113.977] (**) NVIDIA(0): been enabled on all display devices.)
    [ 46113.996] (II) NVIDIA(GPU-0): Display (AU Optronics Corporation (DFP-0)) does not support
    [ 46113.997] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
    [ 46113.997] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 46113.997] (**) NVIDIA(0): device AU Optronics Corporation (DFP-0) (Using EDID
    [ 46113.997] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
    [ 46113.998] (II) NVIDIA(GPU-0): Display (DELL U2311H (DFP-3)) does not support NVIDIA 3D
    [ 46113.998] (II) NVIDIA(GPU-0): Vision stereo.
    [ 46113.998] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 46113.998] (**) NVIDIA(0): device DELL U2311H (DFP-3) (Using EDID frequencies has
    [ 46113.998] (**) NVIDIA(0): been enabled on all display devices.)
    [ 46114.018] (II) NVIDIA(GPU-0): Display (AU Optronics Corporation (DFP-0)) does not support
    [ 46114.018] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
    [ 46114.018] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 46114.018] (**) NVIDIA(0): device AU Optronics Corporation (DFP-0) (Using EDID
    [ 46114.018] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
    [ 46114.019] (II) NVIDIA(GPU-0): Display (DELL U2311H (DFP-3)) does not support NVIDIA 3D
    [ 46114.019] (II) NVIDIA(GPU-0): Vision stereo.
    [ 46114.019] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 46114.019] (**) NVIDIA(0): device DELL U2311H (DFP-3) (Using EDID frequencies has
    [ 46114.019] (**) NVIDIA(0): been enabled on all display devices.)
    [ 46114.120] (II) NVIDIA(0): Setting mode "LVDS-0: nvidia-auto-select @1920x1080 +0+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}, DP-1: nvidia-auto-select @1920x1080 +0+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}"
    [ 46114.574] (II) NVIDIA(GPU-0): Display (AU Optronics Corporation (DFP-0)) does not support
    [ 46114.574] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
    [ 46114.574] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 46114.574] (**) NVIDIA(0): device AU Optronics Corporation (DFP-0) (Using EDID
    [ 46114.574] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
    [ 46114.574] (II) NVIDIA(GPU-0): Display (DELL U2311H (DFP-3)) does not support NVIDIA 3D
    [ 46114.574] (II) NVIDIA(GPU-0): Vision stereo.
    [ 46114.574] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 46114.574] (**) NVIDIA(0): device DELL U2311H (DFP-3) (Using EDID frequencies has
    [ 46114.574] (**) NVIDIA(0): been enabled on all display devices.)
    [ 46114.577] (II) NVIDIA(GPU-0): Display (AU Optronics Corporation (DFP-0)) does not support
    [ 46114.577] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
    [ 46114.577] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 46114.577] (**) NVIDIA(0): device AU Optronics Corporation (DFP-0) (Using EDID
    [ 46114.577] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
    [ 46114.578] (II) NVIDIA(GPU-0): Display (DELL U2311H (DFP-3)) does not support NVIDIA 3D
    [ 46114.578] (II) NVIDIA(GPU-0): Vision stereo.
    [ 46114.578] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 46114.578] (**) NVIDIA(0): device DELL U2311H (DFP-3) (Using EDID frequencies has
    [ 46114.578] (**) NVIDIA(0): been enabled on all display devices.)
    [ 46114.580] (II) NVIDIA(GPU-0): Display (AU Optronics Corporation (DFP-0)) does not support
    [ 46114.580] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
    [ 46114.580] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 46114.580] (**) NVIDIA(0): device AU Optronics Corporation (DFP-0) (Using EDID
    [ 46114.580] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
    [ 46114.580] (II) NVIDIA(GPU-0): Display (DELL U2311H (DFP-3)) does not support NVIDIA 3D
    [ 46114.580] (II) NVIDIA(GPU-0): Vision stereo.
    [ 46114.580] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 46114.580] (**) NVIDIA(0): device DELL U2311H (DFP-3) (Using EDID frequencies has
    [ 46114.580] (**) NVIDIA(0): been enabled on all display devices.)
    [ 46114.583] (II) NVIDIA(GPU-0): Display (AU Optronics Corporation (DFP-0)) does not support
    [ 46114.583] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
    [ 46114.584] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 46114.584] (**) NVIDIA(0): device AU Optronics Corporation (DFP-0) (Using EDID
    [ 46114.584] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
    [ 46114.584] (II) NVIDIA(GPU-0): Display (DELL U2311H (DFP-3)) does not support NVIDIA 3D
    [ 46114.584] (II) NVIDIA(GPU-0): Vision stereo.
    [ 46114.584] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 46114.584] (**) NVIDIA(0): device DELL U2311H (DFP-3) (Using EDID frequencies has
    [ 46114.584] (**) NVIDIA(0): been enabled on all display devices.)
    [ 46114.588] (II) NVIDIA(GPU-0): Display (AU Optronics Corporation (DFP-0)) does not support
    [ 46114.588] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
    [ 46114.588] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 46114.588] (**) NVIDIA(0): device AU Optronics Corporation (DFP-0) (Using EDID
    [ 46114.588] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
    [ 46114.588] (II) NVIDIA(GPU-0): Display (DELL U2311H (DFP-3)) does not support NVIDIA 3D
    [ 46114.588] (II) NVIDIA(GPU-0): Vision stereo.
    [ 46114.588] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 46114.588] (**) NVIDIA(0): device DELL U2311H (DFP-3) (Using EDID frequencies has
    [ 46114.588] (**) NVIDIA(0): been enabled on all display devices.)
    [ 46114.591] (II) NVIDIA(GPU-0): Display (AU Optronics Corporation (DFP-0)) does not support
    [ 46114.591] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
    [ 46114.591] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 46114.591] (**) NVIDIA(0): device AU Optronics Corporation (DFP-0) (Using EDID
    [ 46114.591] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
    [ 46114.592] (II) NVIDIA(GPU-0): Display (DELL U2311H (DFP-3)) does not support NVIDIA 3D
    [ 46114.592] (II) NVIDIA(GPU-0): Vision stereo.
    [ 46114.592] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 46114.592] (**) NVIDIA(0): device DELL U2311H (DFP-3) (Using EDID frequencies has
    [ 46114.592] (**) NVIDIA(0): been enabled on all display devices.)
    [ 46114.596] (II) NVIDIA(GPU-0): Display (AU Optronics Corporation (DFP-0)) does not support
    [ 46114.596] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
    [ 46114.596] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 46114.596] (**) NVIDIA(0): device AU Optronics Corporation (DFP-0) (Using EDID
    [ 46114.596] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
    [ 46114.597] (II) NVIDIA(GPU-0): Display (DELL U2311H (DFP-3)) does not support NVIDIA 3D
    [ 46114.597] (II) NVIDIA(GPU-0): Vision stereo.
    [ 46114.597] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 46114.597] (**) NVIDIA(0): device DELL U2311H (DFP-3) (Using EDID frequencies has
    [ 46114.597] (**) NVIDIA(0): been enabled on all display devices.)
    [ 46114.608] (II) NVIDIA(GPU-0): Display (AU Optronics Corporation (DFP-0)) does not support
    [ 46114.608] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
    [ 46114.608] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 46114.608] (**) NVIDIA(0): device AU Optronics Corporation (DFP-0) (Using EDID
    [ 46114.608] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
    [ 46114.609] (II) NVIDIA(GPU-0): Display (DELL U2311H (DFP-3)) does not support NVIDIA 3D
    [ 46114.609] (II) NVIDIA(GPU-0): Vision stereo.
    [ 46114.609] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 46114.609] (**) NVIDIA(0): device DELL U2311H (DFP-3) (Using EDID frequencies has
    [ 46114.609] (**) NVIDIA(0): been enabled on all display devices.)
    [ 46114.611] (II) NVIDIA(GPU-0): Display (AU Optronics Corporation (DFP-0)) does not support
    [ 46114.611] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
    [ 46114.611] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 46114.611] (**) NVIDIA(0): device AU Optronics Corporation (DFP-0) (Using EDID
    [ 46114.611] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
    [ 46114.612] (II) NVIDIA(GPU-0): Display (DELL U2311H (DFP-3)) does not support NVIDIA 3D
    [ 46114.612] (II) NVIDIA(GPU-0): Vision stereo.
    [ 46114.612] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 46114.612] (**) NVIDIA(0): device DELL U2311H (DFP-3) (Using EDID frequencies has
    [ 46114.612] (**) NVIDIA(0): been enabled on all display devices.)
    [ 46114.616] (II) NVIDIA(GPU-0): Display (AU Optronics Corporation (DFP-0)) does not support
    [ 46114.616] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
    [ 46114.616] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 46114.616] (**) NVIDIA(0): device AU Optronics Corporation (DFP-0) (Using EDID
    [ 46114.616] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
    [ 46114.616] (II) NVIDIA(GPU-0): Display (DELL U2311H (DFP-3)) does not support NVIDIA 3D
    [ 46114.616] (II) NVIDIA(GPU-0): Vision stereo.
    [ 46114.616] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 46114.616] (**) NVIDIA(0): device DELL U2311H (DFP-3) (Using EDID frequencies has
    [ 46114.616] (**) NVIDIA(0): been enabled on all display devices.)
    [ 46114.625] (II) NVIDIA(GPU-0): Display (AU Optronics Corporation (DFP-0)) does not support
    [ 46114.625] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
    [ 46114.625] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 46114.625] (**) NVIDIA(0): device AU Optronics Corporation (DFP-0) (Using EDID
    [ 46114.625] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
    [ 46114.625] (II) NVIDIA(GPU-0): Display (DELL U2311H (DFP-3)) does not support NVIDIA 3D
    [ 46114.625] (II) NVIDIA(GPU-0): Vision stereo.
    [ 46114.625] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 46114.625] (**) NVIDIA(0): device DELL U2311H (DFP-3) (Using EDID frequencies has
    [ 46114.625] (**) NVIDIA(0): been enabled on all display devices.)
    [ 46114.630] (II) NVIDIA(GPU-0): Display (AU Optronics Corporation (DFP-0)) does not support
    [ 46114.630] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
    [ 46114.630] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 46114.630] (**) NVIDIA(0): device AU Optronics Corporation (DFP-0) (Using EDID
    [ 46114.630] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
    [ 46114.630] (II) NVIDIA(GPU-0): Display (DELL U2311H (DFP-3)) does not support NVIDIA 3D
    [ 46114.630] (II) NVIDIA(GPU-0): Vision stereo.
    [ 46114.630] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 46114.630] (**) NVIDIA(0): device DELL U2311H (DFP-3) (Using EDID frequencies has
    [ 46114.630] (**) NVIDIA(0): been enabled on all display devices.)
    [ 46264.057] (II) NVIDIA(GPU-0): Display (AU Optronics Corporation (DFP-0)) does not support
    [ 46264.057] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
    [ 46264.057] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 46264.057] (**) NVIDIA(0): device AU Optronics Corporation (DFP-0) (Using EDID
    [ 46264.057] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
    [ 46264.058] (II) NVIDIA(GPU-0): Display (DELL U2311H (DFP-3)) does not support NVIDIA 3D
    [ 46264.058] (II) NVIDIA(GPU-0): Vision stereo.
    [ 46264.058] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 46264.058] (**) NVIDIA(0): device DELL U2311H (DFP-3) (Using EDID frequencies has
    [ 46264.058] (**) NVIDIA(0): been enabled on all display devices.)
    [ 46264.076] (II) NVIDIA(GPU-0): Display (AU Optronics Corporation (DFP-0)) does not support
    [ 46264.076] (II) NVIDIA(GPU-0): NVIDIA

  • Extended display does not work after downgradin​g to XP

    Hi
    I have downgraded from VISTA to XP
    Before the downgrade extended display (19 LCD connected via docking) it was working OK
    after the upgrade, it stopped working
    I installed the latest video drivers from the LENOVO website, and tried playing with the FN+F7 but no luck.
    It seems that there is some communication with the screen, as the screen looks as if it is working, but the entire screen is black!
    when i look in the screen properties, it seems as if the extended screen is working, but again the screen is black.
    any ideas?
    thanks
    Guy

    which machine and what model of machine are we talking about here?? X60, X61??
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • Airplay mirroring on Mac Mini (late 2012) doesn't work, extended display does...

    Airplay mirroring on Mac Mini (late 2012) doesn't work, extended display does... What's going wrong here?
    Details: OS X Yosemite 10.10
    Apple TV 3rd generation, version 7.0
    Switching Airplay on on Mac Mini works. It goes automatically on extended display mode. Switching to mirroring works for about 1 sec and then it switches back to extended display mode. On my tv screen i see my second desktop. Funny detail: it has the desktop background i used previously. Another funny detail: I had exactly the same problem when i used the previous versions of OS X and the Apple TV software...
    Who can help, please!

    I also have been having problems with Airplay on my 2014 Mac Mini see Mac Mini 2014 Airplay Display Disconnect Bug?
    I"ve also noticed that my Apple TV (3rd Gen) does not appear in the iTunes Airplay list on my Mac Mini whereas it does on my MacBook.
    I've booked a call with Apple Support for next Sunday to discuss the issue.
    If I get any useful info I will pass it on.

  • Help please. Extended display won't work on MBP and AOC 20" 1600 x 900  60HZ monitor. Mirror display does. I've a mini dvd to vga converter cable. Should this work?

    Help please. Extended display won't work on MBP and AOC 20" 1600 x 900  60HZ monitor. Mirror display does. I've a mini dvd to vga converter cable. Should this work?

    I have the same mini display port adapter and Belkin DVI-HDMI cable (but a Panasonic 42" Plasma HDTV) so just set this up on it to see if I could duplicate your problem, unfortunately for you (but good for me) I can't.
    I connected the adapter+HDMI cable before switching the HDTV on and then powered up the MBP. It (the HDTV) came up with my background right away (it's set at Mirror not extended Desktop) and when I run System Preferences/Displays get the following. Sorry but all I can confirm is that adapter+cable combination should work ...
    Try doing a Parameter RAM reset - hold down command/option/p/r keys at start up and wait for three chimes before releasing the keys?

  • Using my Macbook Pro as an 'extended display' (2ndary monitor) to my G5

    My G5 tower looks like it has two DVI connections: one is (30+5) pins and the other is (24+5) pins.
    I have a simple ViewSonic monitor connected to this G5 using the (24+5) pins.
    I am trying to use my new Macbook Pro as a secondary monitor (extended display to the G5 cpu).
    How do I connect the (30+5) pin output from the G5 tower to the (24+5) pin monitor connection on my MacBook Pro? And will this even work? Has anyone tried this?
    Thnks

    Correct. I'm not aware of any laptop that has been designed with a DVI or VGA input to allow use of the laptop's display as a monitor for another computer.
    (I know someone else will bring this up, so I'll include the info here, but I don't recommend the following solution at all)
    The expensive and relatively low-quality (picture-wise) way to work around this would be to buy a FireWire or USB video digitizer and run your desktop's video (as an S-video signal) to the video digitizer, and use your laptop to receive and display the image.

  • I want to display live video in LV, with the option to click on "delay" button, to view what happened N s. ago (i.e., a variable video delay)?

    Hi. I have a standard video camera + PCI 1408. I can nicely show the current image, using LL Ring examples. I want a boolean switch so I can switch from watching the live video to the video recorded N seconds ago. My initial hope was to use LL Ring, with
    lots of buffers, and copy/extract either latest buffers or a buffer several acquisitions ago. However, this seems to add no delay at all. Suggestions please? Thanks Patrick

    Patrick,
    What I start with is the sequence acquisition. I change it from one time to continuous, and simplify it a little bit.
    I have included an example that shows how to set up a buffer and display delayed video.
    One thing you have to do is open MAX and change the maximum number of buffers for IMAQ to something larger than 50. I usually select around 2000 buffers so that I never run out.
    Bruce
    Bruce Ammons
    Ammons Engineering
    Attachments:
    Delayed_Video.vi ‏66 KB

  • Extended display with my MacBook?

    Can I use an extended display with my MacBook?
    I bought the "Mini DisplayPort to VGA Adapter" and hooked it up to a standard Dell monitor. When I try to set up the extended monitor in System preferences/hardware/displays, I do not see the expected "arrange multiple display" option and when I search for extended displays, I get a message that says:
    "The Arrangement tab of Displays preferences is hidden because you only have a single display attached to this computer."

    Hello GDoyle2604,
    I would recommend this article named Apple computers: Troubleshooting issues with video on internal or external displays found here http://support.apple.com/kb/ht1573.
    I feel this would be the best advice for you.
    All the very best,
    Sterling

  • Widgets on extended display

    I am running a macbook with an extended display running 1650x1050. I have my widgets set up for use at home with the dual monitor. If I accidentally look at the dashboard without the external monitor it messes the arrangement up. Some of the widgets are out of reach and now probably just take up cycles.
    Is there any way of locking widgets, or even just closing widgets that get themselves of the screen?
    I hope there is, I have to arrange the widgets a couple times a week.
    Thanks

    So here is a screen shot from each display of what its doing.
    FCPX originaly on the same virtual desktop and often when I switch fcpx to another app and then back (using cmd+tab) it switches fcpx to be on two different desktops like in the screen shots below it now has FCPX on desktops 1 and 2 where as it was both on desktop 1.

  • T440s Extended Display Toggle

    My work recently "upgraded" me from an x220 to a t440s.  Based on the trackpad alone, I question whether this is really an upgrade, but there are plenty of other threads for that discussion it appears.
    My question, which I cannot seem to find an answer to, is this: How do I get two different programs to show on my notebook screen and my attached external display?  On my old x220, I'd use fn-F7 to "extend display", which appears to be the same as on the new unit; but once I've done that, I can't figure out how to assign different programs to the two screens.  On the x220, it was just fn-space ... is there an equivalent on the t440s?
    Thanks in advance for any help, sorry if this is covered elsewhere, I honestly searched for a while.

    Hi Gwfr1g4t,
    Welcome to Lenovo Community Forums!
    I’m sorry to hear that you are facing the issue with Dual Display on ThinkPad T440s.
    In ThinkPad T440s you have to use the key Fn+F7 to switch the display, or you can also use Windows key+P to toggle the display and check.
    Hope this helps. 
    Best regards,
    Hemanth Kumar
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Using mission control/spaces on extended displays

    Is there a way to assign spaces and use mission control on an extended display (i.e. LCD TV) on 10.7.1?  I have connected an LCD TV as an external display to my MBP. When switching spaces on my MBP (primary) display, the external monitor transitions as well.  I have been unsuccessful utilizing multiple spaces strictly on my external display or having a static dispaly when switching spaces.  I would like to be able to switch spaces independently on each display or make a static desktop on my extended display.  Thanks
    Macbook Pro 13" Mid 2009
    2.26 GHz Core 2 Duo
    4GB DDR3 | NVIDIA GEFORCE 9400M 256 MB

    When I'm working with any other apps on my system, I can take advantage of Mission Control, but have forego these advantages when using the Creative Suite. Isn't it really about time that Adobe put some effort into supporting these OS-level features. Whether you favour Mac OS or Windows, you should be able to take advantages of the system you prefer to work on.
    Is there any word on whether CS6 will support these features? (I'm not exactly holding my breath).
    There is no word on anything about InDesign CS6 yet. (Those who know can't say, and I'm not aware of any substantive leaked information.)
    I think that Spaces/Mission Control support is probably predicated on the Carbon to Cocoa conversion. So until InDesign is a Cocoa app, this is unlikely to improve. Personally I manage to avoid using Spaces to any significant degree, so I don't really notice these things. Have you tried Photoshop, which is a Cocoa app? Does it behave better?
    I don't know to what extent these issues are specific to the app, or all tied up in libraries that are common to all the Adobe apps.

  • Unable to Display This Video

    Watching videos at nbcnews.com, some days get message: Unable to display this video. The ads always display, but not the stories.  And only some days. Why?

    You're right that when the apps are available they work better than Safari.  I can't find one for The Last Word, which is my favorite show.  And like I said, the problem seems to be intermittent, so I don't believe that its a Flash issue.  Actually, it's been a couple of days now since I could view The Last Word, so perhaps they are doing something different with their coding than before.
    Thanks for your suggestions... They are helpful.  :-)

  • HT5019 How do I get extended display mode on two monitors off a MB?

    I've tried to find answers on other threads but no luck. Is it possible to connect two monitors to a 2008 unibody MB (mavericks) to use extended display? I've never had a problem with using one monitor (mini dvi to vga) as an extended display and now I'd like to add a second monitor via a vga splitter. I thought upgrading to mavericks would solve this but no luck. It's only letting me mirror displays. The "arrangement" option in display prefs not available.  Any help would be greatly appreciated. I never for one second thought this would be so complicated.

    Exactly what Bob Levine said. Can confirm, running a two monitor display here.

Maybe you are looking for