HT202447 is this dealing with the current "security" issues Apple is now addressing ?
By disabling the Java web plug in in Safari does this deal with/fix the current "security" issues Apple is now addressing?
If Software Update reports that the update is available, it means that you are or have been running Java. Install it. It will remove the Flashback malware.
If Security Update 2012-003 does not appear, then you have not been running Java. Leave it disabled.
In other words, merely un-checking the "enable Java" checkbox will not remove the malware if it is already present. You should install the update if it is offered to you.
Similar Messages
-
Does this work with the macbook?
does this work with the new macbook?
Apple Mini DVI to Video Adapter
http://store.apple.com/Apple/WebObjects/ukstore.woa/6644042/wo/Dg4BvxbpYG2k3zYlb 4c1UxPXhbI/8.0.23.1.0.8.25.7.11.0.3
it dosent state the macbook thoughthanks just got 1
-
How can we handle browser settings while dealing with the security ?
Hi ,
how can we handle browser settings while dealing with the security ?When we configured security in web.xml , during the first request the container is asking for the authentication credentials once they are provided it go's on. but when the user gives a fresh request from the second window within the same browser that time it is not asking for authentication. How can we overcome this.Is there anything to do with server configurations?
How can we make the container no to keep the things or act like session?Ya... I am taking a small example need not happen always but a kind of possibility i am thinking off.
once the user sign out and just left without closing the browser and a friend (suppose not a good friend ... just kidding...) of that user may open the same jsp or file .This time the security is breached. If that feature or property exists....
I know what you might say ... the user will log-out before leaving where a programer might invalidate the session at the time of log out.
Consider the case of a bad Programing or just a programer might forget to invalidate,At that time as a application administrator how can he solve that issue.
Thanks.......
Edited by: user8483670 on Jun 6, 2011 1:08 AM
Edited by: user8483670 on Jun 6, 2011 1:09 AM -
need lightroom 4.4 asmac is 10.6.8 and not compatible with anything higher. Does this come with the creative cloud? Would really like a disc but that doesn't seem to happen anymore. Currently have cs4 and d7100 hence need 4.4 to open raw Any ideas? Is this now customer service or does adobe have a customer service team . Site not user friendly. Thanks
Graham Giles wrote:
Have you seen this type of problem before? I think it could be a serious issue for anyone in a similar position.
No; but then, I've not had occasion to use TDM. I've been using firerwire drives for over 10 years, both FW400 and FW800, with no issues except a bit of instability using a B&W G3 machine.
TDM should be safe. Using cautious, manual copying of files from the Target machine to the Host machine should not result in unexpected loss of files or damage to the Target drive's directories. It should behave exactly the same as if it were an external (to the Host) firewire drive.
• I don't suppose there is anything I can do to 'put back' lost items from a separate Time Machine drive which has an up to date backup on it.
There is probably a way to do that - seems to me that's one of the reasons for a Time Machine volume.
On the other hand, if the Time Machine volume is rigidly linked to the now-absent OS on the original drive, there may be no way to effectively access the files in the TM archive.
I know that using a cloned drive would work well in this instance.
I have no experience with Time Machine, so perhaps someone who has will chime in with suggestions.
With the machine in TDM with the other machine, have you tried running Disk Utility to see if you can effect repairs to the drive? -
Problem viewing forms.This form is not supported with the current version of Adobe Reader.
Upgrade to the latest version for full support.
What exactly do I need to do?That means you were probably using Adobe Acrobat to view PDF's. Acrobat is totally unnessary, you can view PDF's in Preview (Applications - Preview).
BTW PLEASE complete your profile. It's very difficult to help someone when they don't provide any information about their system. You can easily do this by clicking Your Stuff in the upper right of this page, then click Profile and fill in the pertinent information. -
I deleted gardens of time yesterday and need to get it back with the current data and progress. Is this possible?
Is that on an iPad, iPod Touch or iPhone?
-
When I click on iPhoto(9.5.1) i get "To open your library with this version of iPhoto, it first needs to be prepared." but i downloaded the up-grader, used it and it tells me the library can open with the current version... Then when I click on the iphoto again i get the same message "To open your library with this version of iPhoto, it first needs to be prepared."'
What should I do?The upgraded is only necessary for libraries created with iPhoto '07 or eearlier. Just double click the library to open it in iPhoto, and let it upgrade, if it has been created by a newr version.
-
iTunes randomly stops playing purchases that have previously viewed on the same hardware. It has an error message about HD. How can this issue be resolved? What information is available besides the "learn more" option that does not deal with the problem?
Many people have the same problem. However, there is little or nothing readily available to users. This problem has existed for two or more years. Does anyone have anything to offer about this disturbing problem?Thanks for the suggestion kcell. I've tried both versions
9.0.115 and 9.0.124 and both fail with the policy permission error.
I also tried with and without your crossdomain.xml file but
with the same result. It looks like this file is intended for URL
policy, instead of socket policy. Recently Adobe separated the two.
When I run with the files installed on my dev PC, it does
work, which makes sense because the flash player isn't loaded from
an unknown domain.
I did get one step closer. If a crossdomain.xml in the server
root exists and the socketpolicy file is loaded from the app folder
then the first two warnings disappear. The logs now show:
OK: Root-level SWF loaded:
https://192.168.2.5/trunk/myapp.swf
OK: Policy file accepted: https://192.168.2.5/crossdomain.xml
OK: Policy file accepted:
https://192.168.2.5/trunk/socketpolicy.xml
Warning: Timeout on xmlsocket://192.168.2.5:843 (at 3
seconds) while waiting for socket policy file. This should not
cause any problems, but see
http://www.adobe.com/go/strict_policy_files
for an explanation.
Warning: [strict] Ignoring policy file with incorrect syntax:
xmlsocket://192.168.2.5:993
Error: Request for resource at xmlsocket://192.168.2.5:993 by
requestor from https://192.168.2.5/trunk/myapp.swf is denied due to
lack of policy file permissions.
Which basically says, everything is okay, but you stay out
anyway.
PS: I found the XML schema files here:
http://www.adobe.com/devnet/flashplayer/articles/fplayer9_security_02.html
and the socket policy schema:
http://www.adobe.com/xml/schemas/PolicyFileSocket.xsd.
UPDATE: When serving up the policy file on port 843 using the
example perl script then the socket connection seems to be accepted
and the connect succeeds. After that flex hangs trying to logon to
the IMAP server. -
What is the deal with the iOS 7.1? I downloaded it yesterday. This am my phone was at 100%. 4 hours later it was 14%---and I didn't do anything I don't usually do, and my battery will last all day!
Have a look here > How to trouble-shoot iOS 7.1 battery problems
-
Fresh installation of Exchange Server 2013 on Windows Server 2012.
Our first test account cannot access their email via Outlook but can access fine through OWA. The following message appears - "Cannot open your default e-mail folders. You must connect to Microsoft Exchange with the current profile before you can synchronize
your folders with your Outlook data file (.ost)" is displayed.
If I turn off cached Exchange mode, setting the email account to not
cache does not resolve the issue and i get a new error message - "Cannot open your default e-mail folders. The file (path\profile name).ost is not an Outlook data file (.ost). Very odd since it creates its own .ost file when you run it for the first
time.
I cleared the appdata local Outlook folder and I tested on a new laptop that has never connected to Outlook, same error message on any system.
Microsoft Exchange RPC Client Access service is running.
No warning, error or critical messages in the eventlog, it's like the healthiest server alive.
Any help would be greatly appreciated. I haven't encountered this issue with previous versions of Exchange.So it looks like a lot of people are having this issue and seeing how Exchange 2013 is still new (relatively to the world) there isn't much data around to answer this. I've spend ALOT of time trying to figure this out.
Here is the answer. :) - No I don't know all but I'm going to try to give you the most reasonable answer to this issue, in a most logical way.
First thing I did when I was troubleshooting this issue is that I ignored Martina Miskovic's suggestion for Step4 http://technet.microsoft.com/library/jj218640(EXCHG.150)because it didn't make sense to me because I was trying to connect
Outlook not outside the LAN but actually inside. However, Martina's suggestion does fix the issue if it's applied in the correct context.
This is where the plot thickens (it's stew). She failed to mention that things like SSL (which I configure practically useless - anyone who ever worked in a business environment where the owner pretty much trusts anyone in the company, otherwise they don't
work there - very good business practice in my eyes btw, can confirm that...) are some sort of fetish with Microsoft lately. Exchange 2013 was no exception.
In exchange 2003, exchange 2007 and exchange 2010 - you could install it and then go to outlook and set it up. And when outlook manual Microsoft Exchange profile would ask you for server name, you would give it and give the name of the person who you setting
up - as long as machine is on the domain, not much more is needed. IT JUST WORKS! :) What a concept, if the person already on premises of the business - GIVE HIM ACCESS. I guess that was too logical for Microsoft. Now if you're off premises you can use things
like OutlookAnywhere - which I might add had their place under that scenario.
In Exchange 2013, the world changed. Ofcourse Microsoft doesn't feel like telling it in a plain english to people - I'm sure there is an article somewhere but I didn't find it. Exchange 2013 does not support direct configuration of Outlook like all of it's
previous versions. Did you jaw drop? Mine did when I realized it. So now when you are asked for your server name in manual outlook set up and you give it Exchange2013.yourdomain.local - it says cannot connect to it. This happens because ALL - INTERNAL AND
EXTERNAL connection are now handled via OutlookAnywhere. You can't even disable that feature and have it function the reasonable way.
So now the question still remains - how do you configure outlook. Well under server properties there is this nice section called Outlook anywhere. You have a chance to configure it's External and Internal address. This is another thing that should be logical
but it didn't work that way for me. When I configured the external address different from the internal - it didn't work. So I strongly suggest you get it working with the same internal address first and then ponder how you want to make it work for the outside
users.
Now that you have this set up you have to go to virtual directories and configure the external and internal address there - this is actually what the Step 4 that Martina was refering to has you do.
Both external and internal address are now the same and you think you can configure your outlook manually - think again. One of the most lovely features of Outlook Anywhere, and the reason why I had never used it in the past is that it requires a TRUSTED
certificate.
See so it's not that exchange 2013 requires a trusted certificate - it's that exchange 2013 lacks the feature that was there since Windows 2000 and Exchange 5.5.
So it's time for you to install an Active Direction Certificate Authority. Refer to this wonderful article for exact steps - http://careexchange.in/how-to-install-certificate-authority-on-windows-server-2012/
Now even after you do that - it won't work because you have to add the base private key certificate, which you can download now from your internal certsrv site, to Default Domain Policy (AND yes some people claim NEVER mess with the Default Domain Policy,
always make an addition one... it's up to you - I don't see direct harm if you know what you want to accomplish) see this: http://technet.microsoft.com/en-us/library/cc738131%28v=ws.10%29.aspx if you want to know exact steps.
This is the moment of ZEN! :) Do you feel the excitement? After all it is your first time. Before we get too excited lets first request and then install the certificate to actual Exchange via the gui and assign it to all the services you can (IIS, SMTP and
there is a 3rd - I forgot, but you get the idea).
Now go to your client machine where you have the outlook open, browse to your exchange server via https://exchang2013/ in IE and if you don't get any certificate errors - it's good. If you do run on hte client and the server: gpupdate /force This will refresh
the policy. Don't try to manually install the certificate from Exchange's website on the client. If you wanna do something manually to it to the base certificate from the private key but if you added it to the domain policy you shouldn't have to do it.
Basically the idea is to make sure you have CA and that CA allows you to browse to exchange and you get no cert error and you can look at the cert and see that's from a domain CA.
NOW, you can configure your outlook. EASY grasshoppa - not the manual way. WHY? Cause the automatic way will now work. :) Let it discover that exachange and populate it all - and tell you I'm happy! :)
Open Outlook - BOOM! It works... Was it as good for you as it was for me?
You may ask, why can't I just configure it by manual - you CAN. It's just a nightmare. Go ahead and open the settings of the account that got auto configed... How do you like that server name? It should read something like [email protected]
and if you go to advanced and then connection tab - you'll see Outlook Anywhere is checked as well. Look at the settings - there is the name of the server, FQDN I might add. It's there in 2 places and one has that Mtdd-something:Exchange2013.yourdomain.local.
So what is that GUID in the server name and where does it come from. It's the identity of the user's mailbox so for every user that setting will be different but you can figure it out via the console on the Exchange server itself - if you wish.
Also a note, if your SSL certs have any trouble - it will just act like outlook can't connect to the exchange server even though it just declines the connection cause the cert/cert authority is not trusted.
So in short Outlook Anywhere is EVERYWHERE! And it has barely any gui or config and you just supposed to magically know that kind of generic error messages mean what... Server names are now GUIDs of the [email protected] - THAT MAKES PERFECT
SENSE MICROSOFT! ...and you have to manage certs... and the only place where you gonna find the name of the server is inside the d*** Outlook Anywhere settings in the config tab, un it's own config button - CAN WE PUT THE CONFIG ANY FURTHER!
Frustrating beyond reason - that should be Exchange's new slogan...
Hope this will help people in the future and won't get delete because it's bad PR for Microsoft.
PS
ALSO if you want to pick a fight with me about how SSL is more secure... I don't wanna hear it - go somewhere else... -
SQL2005 on winserver 2003. I have a view in Xdb that accesses tables in 2 different databases (Xdb and Ydb) on the same server. I have mixed mode security. I have a SQL user (XYuser) that has read access to all tables and views on both databases, yet when I try to access the view using a C# windows application I get the following error:
The server principal "XYuser" is not able to access the database "Ydb" under the current security context
This same scenario works under SQL 2000. I looked through the postings and tried to set TRUSTWORTHY ON on both databases but that didn't help. I can access any other views or tables on the SQL 2005 server, just not the one that joins the tables cross databases. Any help is much appreciated... johnThis appears to be a Login/Database Mapping issue. I was having this problem, but was able to resolve it as follows:
Using the SQL Server management Studio:
In the Object explorer, under the SERVER security folder (not the database security folder), expand Logins.
That is: ServerName -> Security -> Logins
NOT: ServerName -> Databases -> DatabaseName -> Security -> Users
Select the Login that is having the troubles. Right click on the Login and select ‘Properties.’
The ‘User Mapping’ page should list all databases on the server with a check mark on the databases that the Login has been mapped to. When I was getting the error, the database in question was not checked (even though the Login was assigned as a User on the database itself). Map the Login by checking the box next to the database name. Set the default schema. Then select the roles for the Login in the Database role membership list box. I selected db_datareader and public. After clicking OK to save the changes, the problem was resolved.
In order to ‘Map’ the Login, the Login must not already be as User on the database, so you may have to go to the database security (ServerName -> Databases -> DatabaseName -> Security -> Users) and delete the Login from the list of database Users before mapping the Login to the database. -
E-mailed File "The project is not compatible with the current version of Premiere Elements"
I have Version 12 on a PC.
My friend has Version 12 on a MAC.
E-mailed him a file.
He could not open, and a message box popped up: "The project is not compatible with the current version of Premiere Elements".
Could someone kindly asssit, this does not make sense as to why it is not opening, since both computers are using the same version.
Thank you,
Ben
[email protected]Ben
As said, you cannot open a Premiere Elements 12 Windows project file (named project.prel) in Premiere Elements 12 Mac. And vice versa.
Details
Given that your source is imported into a Premiere Elements 12 Windows project and placed on its Timeline for edit. That Timeline content cannot get out of the program without export. Export choices are found in the Publish+Share section of the program.
In your case, you want to take the Timeline content of Premiere Elements 12 Windows and export it to a format with which Premiere Elements 12 Mac supports (look at .mov or .mp4). In this regard, in Premiere Elements 12 Windows look at Publish+Share/Computer/AVCHD and one of its .mp4 presets or Publish+Share/Computer/QuickTime and one of its .mov presets (suggested H.264 video codec).
Those exports will be saved to the computer hard drive of the Windows computer. Then email the .mov or .mp4 file (beforehand, check the
email carrier's specification for that). Depending on the circumstances, you could transfer the file to a USB Flash Drive for the sharing.
Remember, sharing the .mov and .mp4 involves "whole" video. Depending on the edits, the video may need to be cut by the receipent. You are not dealing with the project file. The story would be different if this sharing and editing is done from Premiere Elements Windows to Premiere Elements Windows. And, if that were the case, then you would have to assure that the source media of the project traveled with the project file. (See Project Archiver feature of the program.)
That is a rough sketch of the situation. I can fine tune the details further if necessary.
Please review and consider.
Thanks.
ATR -
Hello,
I've got a SOA Suite development environment set up and whilst trying to change the weblogic password using this tutorial a problem arose with my soa managed server.
Firstly I was unable to start the Managed SOA server due to mismatching passwords, and after I modified the boot.properties file, now I cant start the usermessagingserver and soa_infra applications due to the following error:
Error 1
Getting weblogic deployment manager.
Got weblogic deployment manager.
Invoking Start Up operation.
Start Up operation for application usermessagingserver on target soa_server1 RUNNING.
Start Up operation for application usermessagingserver on target soa_server1 FAILED.
weblogic.application.ModuleException: Exception preparing module: EJBModule(sdpmessagingclient-ejb-parlayx.jar)
Unable to deploy EJB: MessagingClientParlayX from sdpmessagingclient-ejb-parlayx.jar:
The run-as security principal, 'OracleSystemUser', chosen for the EJB 'MessagingClientParlayX(Application: usermessagingserver, EJBComponent: sdpmessagingclient-ejb-parlayx.jar)' is not a valid user principal in the current security realm. Please specify a valid user principal for the EJB to use.
Getting weblogic deployment manager.
Got weblogic deployment manager.
Invoking Start Up operation.
Start Up operation for application soa-infra on target soa_server1 RUNNING.
Start Up operation for application soa-infra on target soa_server1 FAILED.
weblogic.application.ModuleException: Exception preparing module: EJBModule(hw_services_wls_ejb.jar)
Unable to deploy EJB: ASNSInteraction from hw_services_wls_ejb.jar:
The run-as security principal, 'OracleSystemUser', chosen for the EJB 'ASNSInteraction(Application: soa-infra, EJBComponent: hw_services_wls_ejb.jar)' is not a valid user principal in the current security realm. Please specify a valid user principal for the EJB to use.
I've checked both weblogic and OracleSystemUser users and their groups are (respectfully) Administrators and OracleSystemGroup.
I've searched for an answer to this problem and found this other support article but couldn't resolve the issue.
The weblogic server version is 10.3.2.0 and it's running on RedHat Linux.@Sri_Sonti
In the Admin Console, I can see both users in the security realm with the following configs:
weblogic:
all atributes with the "value" column blank
groups: Administrators
OracleSystemUser
all atributes with the "value" column blank
groups: OracleSystemGroup
Also I have not found the system-jazn-data.xml file you mentioned. In that folder there's only a readme.txt file.
Best Regards,
luismcs
Enter Cookie as format:
(ex: name=val;) separate with ';'
OKCancel -
I am trying to install Java6 from a free down load. I keep getting the following error message:
The installer can not proceed with the current internet connection settings.
I have tried every option under internet connections.#'''Install or Update the [[Java]] plugin''' to the latest version.
#*Download site: http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)
#**'''''Be sure to <u>un-check the Yahoo Toolbar</u> option during the install if you do not want it installed.
#*Also see "Manual Update" in this article to update from the Java Control Panel in Windows Control Panel: http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates
#* Removing old versions (if needed): http://www.java.com/en/download/faq/remove_olderversions.xml
#* Remove multiple Java Console extensions (if needed): http://kb.mozillazine.org/Firefox_:_FAQs_:_Install_Java#Multiple_Java_Console_extensions
#*Java Test: http://www.java.com/en/download/help/testvm.xml
<br />
<br />
'''You need to update the following.''' The Plugin version(s) shown below was/were submitted with your question and is/are out of date. You should update to avoid known security issues with the version(s) you have installed. Click on "More system info..." to the right of your question to see what was included with your question.
*Shockwave Flash 10.2 r153
#'''''Check your plugin versions''''' on either of the following links':
#*http://www.mozilla.com/en-US/plugincheck/
#*https://www-trunk.stage.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#*There are plugin specific testing links available from this page:
#**http://kb.mozillazine.org/Testing_plugins
#'''Update the [[Managing the Flash plugin|Flash]] plugin''' to the latest version.
#*Download and SAVE to your Desktop so you can find the installer later
#*If you do not have the current version, click on the "Player Download Center" link on the "'''Download and information'''" or "'''Download Manual installers'''" below
#*After download is complete, exit Firefox
#*Click on the installer you just downloaded and install
#**Windows 7 and Vista: may need to right-click the installer and choose "Run as Administrator"
#*Start Firefox and check your version again or test the installation by going back to the download link below
#*'''Download and information''': http://www.adobe.com/software/flash/about/
#**Use Firefox to go to the above site to update the Firefox plugin (will also install plugin for most other browsers; except IE)
#**Use IE to go to the above site to update the IE ActiveX
#*'''Download Manual installers'''.
#**http://kb2.adobe.com/cps/191/tn_19166.html#main_ManualInstaller
#**Note separate links for:
#***Plugin for Firefox and most other browsers
#***ActiveX for IE -
How to fix window boot manager has been blocked by the current security policy on acerv5window 8.1
Hi.. When do you xactly get this error message?Are you trying to boot your computer using a cd?Are you trying to load another operating system? Secure Boot is a feature designed to prevent malicious software and unauthorized media from loading during the boot process. This option is enabled by default, but can be turned off in UEFI / BIOS. Select your Windows 8 device and use the following steps to change the Secure Boot setting:Completely shut down the computer.Power on the system. As soon as the first logo screen appears, immediately press F2 to enter the BIOS.Use the right arrow key to select Security.Use the down arrow key to highlight Set Supervisor Password and press Enter.Create a password and press Enter. Retype the password to confirm and press Enter again.Use the right arrow key to select Boot.Press the down arrow key to select Secure Boot and press Enter.With the arrow key, highlight Disabled and press Enter.Press the F10 key and select Yes to save the changes and exit the BIOSWe suggest removing the supervisor password immediately after enabling Secure Boot. If you choose not to remove your supervisor password, make sure you write it down for future use.
I fixed this issue when I realised I had set a passoword many months ago when I was in Windows 8.1 If you found that your BIOS is locked, use a password you've used for other 'important' things. Cheers, Dave I have an Acer Aspire E1-571 I'm having the same problem - however when I press F2 it goes to a blue security box saying: Enter Current Password: I don't have a password. It was set by the factory, I bought it new. How do I get around this. The last hard drive is trapped - I can't fix it, even with Microsoft's chat help when they accessed my computer remotely.I bought a new hard drive, and have the Windows 7 Professional DVD in the drive - but it can't access it under the current Security Settings - only to find it has a Password - thus my visit to this forum today. Any help you can offer would be gratefully accepted.
Maybe you are looking for
-
Netweaver NSP ABAP engine on 256MB
Hi, I have only a 256MB laptop, where MiniWAS 6.20 was running quite OK. I've installed NSP on the weekend, however it has much higher memory requirement. Log is available here: http://www.geocities.com/incho_master/Netweaver_NSP_ABAP_640_Engine_Inst
-
How to check a particular string in address
hi, I need to check if my address has "freemans" or "foodstuffs or 'db.co.nz, then give a defautl email address. hence i coded like this zstmp_addr type ZCHAR60. IF ( ts_filerefs-zsmtp_addr CA 'foodstuffs' ) AND ( ts_filerefs-zsmtp_addr CA 'fr
-
How much better is the middle-end vs the low end, with no upgrades. Will they both play all games now and probably in the next 3 or 4 years(i realize time-viewing is quite hard), at any resolution i dont care THAT much, although it is also nice to ha
-
Acrobat Reader SpeedUpを使うと起動する際に読み込まれるプラグインを選択でき起動が早くなるそうですが.使用しても問題ないでしょうか? 問題があるのであれば.使うのはやめたいと思います.
-
Purchased Acrobat XI won't replace free trial
After I purchased Acrobat XI Professional, while waiting for the serial number to arrive, I download the 30 day free trial as was suggested by the Adobe website. Now that I have the serial number, after I've downloaded it, it tells me it can't instal