HT202665 What are the best Discs to use with my Apple USB SuperDrive?

HHi,
i have an Apple USB SuperDrive, would like to know which are the best Blank Discs to use please, I live in the United Kimgdom

I don't use so many disks nowadays but when we do, I really only try to make sure they are a recognised brand (Phillips, Maxwell, TDK etc etc), technology has moved on from having to worry about which you use. I would avoid brands you've never heard of though.

Similar Messages

  • What are the best settings to use for the newest AirPort Extreme (AC wifi) with my optimum online service provider?

    I have the current generation of the AirPort Extreme and a handful of devices that utilize the new 5Ghz A/C frequency. My internet speeds were blazing fast when I had first set it up but lately it has been lagging terribly. I was told that changing my dhcp did help, which it did it seems like it might be back to its normal speeds but I just want to know what are the best settings to configure for the airport so that I can get the most out of my service on all my devices? I'm using a CAT 6 cable which does help, I have a guest wifi setup with a wifi password which I understand will slow it down a little. Can anyone just point me in the right direction or just give me a step by step guide on what settings to configure? Should I really consider turning off the guest network?

    I am assuming that you are looking to configure your network to provide the highest level of bandwidth possible for your network clients. If that is the case, the following are a few things to consider:
    The Internet modem should support Gigabit Ethernet. That is the Ethernet connection between the modem and your 802.11ac AirPort Extreme should be Gigabit Ethernet.
    Use CAT-5e or CAT-6 Ethernet cables between all wired connections.
    Only expect 802.11ac performance with 802.11ac clients in the same room as the base station.
    Eliminate or significantly reduce any forms of Wi-Fi interference on both the 2.4 & 5 GHz bands.
    When streaming, especially HD video on your local network, use wired connections between the host and player devices when possible.
    Other than the above suggestions there are no "magic" settings that you can make on your AirPort. Note: The Guest network shares the same bandwidth as the "main" network. Unless you have a network goal to provide this type of network, it is best left disabled.

  • What are the best devices to use in my car to listen to music on my 3rd gen iPod Nano?

    What are the best devices on the market today to use in my car to listen to music on my 3rd Gen iPod nano?  I currently use the Monster device that plugs into the electrical adapter (former cigarrette lighter!) in the car.  It's a pain in the neck to manually search for unused FM stations on a long trip. I want something that automatically searches for unsused FM stations or, better yet, that will allow me to somehow connect the iPod into the CD player or directly to the radio itself.  I have a 2004 Toyota Highlander.
    Any suggestions for quality after-market products from the Forum?

    If you have files with the .m4v or .m4a extension its better to change them to .mp4. The M4 extensions will sometimes download in the browser instead of playing.
    A usefull free app for file conversion is Miro...
    http://www.iwebformusicians.com/Website-Movie-Video/Easy-Movie-Player.html
    It can quickly convert to all the formats you need to load for html5 playback: MP4, OGG, WebM
    If you include these three, fallback to flash will only be required for Internet Explorer V 8 and older. V 9 is supposed to support html5 but I haven't actually seen any proof of this.
    Players like flowplayer and JWLongtail are convenient because the control bar icon be customized. This lets you get away from the nasty looking QT control bar.
    http://www.iwebformusicians.com/Website-Movie-Video/JW-Media-Player.html
    http://www.iwebformusicians.com/Website-Movie-Video/Flow-Player.html
    "I may receive some form of compensation, financial or otherwise, from my recommendation or link."

  • How do i transfer DVD files to my Ipod?  What are the best programs to use?

    I have an annoying time trying to get DVDs onto the Ipod. I can't help but think why Apple didn't make it easier to do this. Does anyone know how to get DVDS into the Ipod and what are the best conversion programs?

    The iTunes/iPod ecology is designed to make it hard to use the iPod for casual copyright theft, but extracting your data is eminently feasible.
    You should be able to recover the media with the tips in  this post from forum regular Zevoneer. Data in your apps is potentially at risk but you can probably transfer your purchases into a newly authorised library, backup the device, recover any other media using third party tools, then restore the device from the backup. That should switch the assocation of the device to the new library but I've never needed to test the method so I can't say for sure.
    tt2

  • What is the best keyboard to use with my iPad?

    I'd like use a keyboard for typing on my iPad. What are the best options?
    Thanks, Steve.

    Zagg has a new Bluetooth keyboard for the iPad2 and other devices;
    http://www.zagg.com/accessories/zaggkeys-flex-tablet-keyboard-stand.php

  • What is the best programme to use with iwatermark or similiar copyright software

    I want to watermark my photos, I have been told iwatermark is real good but can someone tell me what is the best app to use in conjunction with copyrighting or watermarking sofware.
    Thanks

    It’s really a personal choice. I’ve recently bought a new Dell. Like you I was not interested in the consumer products so I purchased a business spec machine and I’m very happy with it. It’s Dell Precision T3600 with Intel Xeon CPU and Nvidia Quadro 2000 graphics card. Running Windows 7 Pro 64 bit with 8gb RAM. I got 1TB and 500gb drives both 7500 rpm with a 3TB Seagate external HD. I gave SSD a miss until prices drop further. I don’t think the extra speed is that relevant to Photo editing although perhaps more relevant to video rendering. I’m also not gaming or running other apps that might benefit from an SSD. Photoshop Elements is a 32 bit program which runs well on 64 bit systems but cant use more than 1.5 to 2GB of RAM. Premiere Elements has 64 bit support and can therefore take advantage of the extra RAM. At the end of the day it’s your choice.

  • What are the best printers to use?

    I bought a HP Officejet 4500 but it's not even showing up during the installation. What printer/scanner/faxes are the best for my MacBook Pro 10.6.8?

    We currently own a HP Deskjet 3054 and Laserjet CP1525nw, both are great printers. The Laserjet is both AirPrint and ePrint ready, two features I looked for when buying a new Color Laser to replace my last one. ePrint is a very handy feature for me, I can print things without having to be home. Both offer driver support through Apple directly via Software Update, no need to use HP.com sourced drivers. Anecdotally, I print a LOT of meaty PDF documents and the ability to upgrade the internal RAM on the printer was something I also looked for (speeds up print times dramatically). For $10, I was able to upgrade the internal RAM to 384MB from 128MB with a 256MB DIMM. Laserjet RAM is keyed specifically for the Laserjet, you can't use a standard SO-DIMM. However, it's very cheap and can be found quite easily online.
    Contrary to most of the above comments, we have not had any issues with either of our HP printers, or any other HP printers we have owned. My last BubbleJet and  also favorite brand is Epson. I donated my Stylus CX7400 after several years of use (mainly college). It was a solid printer as well, I loved printing photos on it. (The Deskjet does a good job). Epson inks look great but (personal opinion) I think the HP inks tend to look more vibrant. My wife has a Brother laser printer at her work that has performed great for the past few years.
    The worst printer I have ever owned was my last Color Laser printer made by Samsung, the CLP-315W. It failed outright after three years of light use. The Brother has gotten moderate-to-heavy use (school classroom) for several years now, hasn't skipped a beat. As a printer, Samsung has to be the worst possible brand I've ever owned.
    Hope that helps!

  • What are the best practices to use GLOBAL Variables

    Hi,
    Please guide how Global Variables can be declared and how they can be initialized.
    Further please guide what are the impacts of Global Variables(if any) on the memory of CLIENT or SERVER, if they are not initialized or freed up after usage.
    Thanks.
    Regards.

    spilgrim wrote:
    My preference is not to use them and to use parameters or package variables. There is not real control on globals so you can end up with an applicatios that has lots of them that are only used once but persist for the user session.I second that. I don't know how often I searched for bugs caused by typos in the names of global variables. Plus the fact that they are only of datatype VARCHAR2. If you are using share_library_data you could also use Package globals in a forms library to share data between called and calling forms. Or you could use a database package...
    cheers

  • What are the best disc doctor tools

    Okay, my G5 is running like a Commodore 64! It is SLOW and freezing all the time! it freezes on iPhoto, Mail, ..... just about anything actually to the point where it won't force quit and we are having to hold down the old international reset button.
    What are the steps to go down. I've run the standard TechTool tests which seemed to pass okay. Can somebody give me the process to go through here...
    I haven't Loaded any new software recently, nothing dramatic has changed on our Mac... it started to slow down so the only changes I have made is to move alot of gear off our HD and onto a external drive.
    We have 191 GB free, 1.5 GB DDR SDRAM. Please... I am about to throw this out for a new computer but feel a computer with this much grunt should be able to be salvaged.
    Please help!!

    The most important thing to do is backup your data as my FAQ explains:
    http://www.macmaps.com/backup.html
    Next check that the problem isn't occuring in a second user in Apple menu -> System Preferences -> Accounts.
    If it is, then you have a system wide issue. If you have a system wide issue, the first utility I'd try is Applications -> Utilities -> Disk Utility to repair permissions.
    Next if that doesn't work, verify disk. If verify disk reveals errors, boot off the 10.4 installer disk to repair disk as my directory FAQ explains:
    http://www.macmaps.com/directoryfaq.html
    If the directory is good, try running Macjanitor:
    http://personalpages.tds.net/~brian_hill/macjanitor.html
    If you still don't have the problem solved, go over this FAQ on the fonts:
    http://discussions.apple.com/thread.jspa?messageID=607630
    If you still haven't solved the problem, then I'd ask if you have ever seen a kernel panic with no third party peripherals attached. Here's my FAQ on kernel panics:
    http://www.macmaps.com/kernelpanic.html
    If you have, I suggest replacing the RAM.

  • What is the best printer for use with iMac osx lion 10.7.4

    What is the best printer to purchase for use with imac osx lion 10.7.4. Preferably an all-in-one with wireless capabilities. around $125-$150

    JDLASK wrote:
    I WOULD RATHER NOT PAY MORE THAN ABOUT $125.00 IF POSSIBLE.
    Please don't use all Caps. It's considered shouting. And please don't keep doubling up on your posts.
    Thanks
    Pete

  • What are the best practices for using Lightroom at two locations

    Here is the problem:
    Photographer works weekends and vacations at another location with a second (non-portable) computer.  Photographer wishes to keep two separate but identical copies of the entire photo library and LR catalog for safety.  At the end of a period of work at location 1, photographer wants to take all the changed files (some new, some just modified) and update the LR catalog and the photo library at location 2.  This could be done via internet but possibly it is more practical to transport the changes on a "go-between" drive.
    Anybody have an opinion on the best ways to do this?  Is there a way to just export (as catalog) the changed files and folders and then import at the other location?  Manually copying the folders of photos that we think have been changed runs the risk of missing some.  Simply copying everything means carrying close to 2TB and this will also take a lot of time before each trip.  Not so practical every weekend.
    Advice and ideas appreciated.

    I had just started exploring smart collections (never looked at this before today) as a way of trying to collect changed/new files and metadata when I walked back into my office from my wife's (she's the photographer- i'm just tech support) and saw your reply.  I think this is the direction we are leaning to because it should cut down on the hardware needs.  The other reply that suggested using a third drive would add another layer of protection in that one would always have a recent complete backup on hand in case of sudden hardware failure, but we should be able to keep the risk way down by using a second Drobo 2 at the second location.  Drobo has been reliable and the slowness can be overcome by saving working Photoshop files to the internal drive and only saving the final finished files back to the library on Drobo.
    I am concerned about a possible performance drop if we run both the LT catalog and the file library on Drobos...currently run the catalog on the internal drive based on advice I read some time ago.
    So I assume that it is possible to import the "go-between" catalog into LR on an internal drive while copying the "negative" files to the Drobo at each location.  Hopefully this process is not painfully slow...but I suppose it depends on the number of files that are being exported and imported each time.
    A third method that I have been investigating and would love any comments on from someone who has tried it is syncing the two Drobos via internet possibly using Synchronize Pro-X (first sync done locally!)...this might have the benefit of daily offsite backup in between visits.  One thing that scares me is the possibility that somehow something screws up digitally and data is destroyed on both drives at the same time before one has a chance to discover a problem.  Also how would one verify that the second location Drobo has been properly synced before arriving to discover some problem prevented a successful sync?
    Thank you both for replying and helping me think through this problem.
    Mark

  • What are the best practices for using the enhancement framework?

    Hello enhancement framework experts,
    Recently, my company upgraded to SAP NW 7.1 EhP6.  This presents us with the capability to use the enhancement framework.
    A couple of senior programmers were asked to deliver a guideline for use of the framework.  They published the following statement:
    "SAP does not guarantee the validity of the enhancement points in future releases/versions. As a result, any implemented enhancement points may require significant work during upgrades. So, enhancement points should essentially be used as an alternative to core modifications, which is a rare scenario.".
    I am looking for confirmation or contradiction to the statement  "SAP does not guarantee the validity of enhancement points in future releases/versions..." .  Is this a true statement for both implicit and explicit enhancement points?
    Is the impact of activated explicit and implicit enhancements much greater to an SAP upgrade than BAdi's and user exits?
    Is there any SAP published guidelines/best practices for use of the enhancement framework?
    Thank you,
    Kimberly
    Edited by: Kimberly Carmack on Aug 11, 2011 5:31 PM

    Found an article that answers this question quite well:
    [How to Get the Most From the Enhancement and Switch Framework as a Customer or Partner - Tips from the Experts|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/c0f0373e-a915-2e10-6e88-d4de0c725ab3]
    Thank you Thomas Weiss!

  • What is the best motherboard to use with Photoshop elements 11 premium edition?

    I'm going to build my computer by selecting components and having Fryes service put them together. I'd like to build a system with a motherboard that supports 8 gb RAM, and a 250GB SSD drive (SATA III) with a 750gb or 1 TB  7500 rpm slave internal drive or an similar 7500 rpn external drive. The system I build will have usb 3 and hdmi ports with a dvd rom 24x drive. It will have a Windows 7 premium home edition OS. It will have an Nvidea video card with 2 gigs of independent ram.
    I'm trying to build a PC that works efficiently with Photoshop Elements premium version 11. I am a casual home user. I will be doing some basic video rendering of DVD home videos that I have converted to dvd from VHS and 8mm format.. I am NOT a gamer.
    I have a monitor and therfore I'm only interested in building a desktop box with thease specs and I'd like to get the best quality componenets for my desktop build for $1300 or less.
    I'm not interested in anything from Dell (alienware).
    Any motherboard recomendations or criticism/recomendations of other components I want to use will be greatly appreciated.
    Thanks

    It’s really a personal choice. I’ve recently bought a new Dell. Like you I was not interested in the consumer products so I purchased a business spec machine and I’m very happy with it. It’s Dell Precision T3600 with Intel Xeon CPU and Nvidia Quadro 2000 graphics card. Running Windows 7 Pro 64 bit with 8gb RAM. I got 1TB and 500gb drives both 7500 rpm with a 3TB Seagate external HD. I gave SSD a miss until prices drop further. I don’t think the extra speed is that relevant to Photo editing although perhaps more relevant to video rendering. I’m also not gaming or running other apps that might benefit from an SSD. Photoshop Elements is a 32 bit program which runs well on 64 bit systems but cant use more than 1.5 to 2GB of RAM. Premiere Elements has 64 bit support and can therefore take advantage of the extra RAM. At the end of the day it’s your choice.

  • What is the best stylus to use with the iPad Air?

    I'm looking for a stylus to use for the iPad Air to use for sketching and just simple note taking And from the reviews I've read it sounded like the Adonit Jot Pro for 29.99 seemed like a good deal to use for the iPad Air. I'm also a worrywart about if it will harm the screen? So I'm looking for someone's review with their experience using "The Adonit Jot Pro on the iPad Air." Thanks so much For your time and review!

    I've never had a problem with it. I like it a lot for writing. I like the very fine point. I don't know as it's a great stylus for sketching, though. I tend to do most of my sketching in the app Paper with their Pencil stylus.
    When using any stylus, it's good practice to make sure there are no bits of grit on the screen before using. If they should become trapped between the stylus tip and the screen, you could get scratches.

  • What is the best projector to use with a macbook air

    Need a trouble free projector to use with my macbook air for showing photos and business documents , excel eyc.

    If you don't mind connecting the projector directly to the Mac with an HDMI cable, any projector with an HDMI input will work. There are a very large variety to choose from. Projector People is a competent vendor that I have used and can recommend. They are knowledgeable about Macs. Describe your needs and they will make recommendations. Their prices are as good as you are likely to find anywhere else.
    You will also need a Thunderbolt to HDMI adapter. Purchase one from Monoprice. They are less than $10.

Maybe you are looking for

  • Service ECC_INVENTORY002QR - unexpected response content

    Hi, I'm testing enterprise service ECC_INVENTORY002QR / InventoryByLocationAndMaterialQueryResponse_In from package SAP APPL with a nonSAP application.. http://es-workplace.sap.com/socoview(bD1lbiZjPTAwMSZkPW1pbg==)/render.asp?id=C4BA00F8860E11DB2B24

  • Help! Jpg, Png, Tiff files creating on MAC won't open on PC

    Ok...I'm new to MAC and I'm creating all of my images in Photoshop as i have always done on my PC. But now when i save anything as a JPG or PNG nobody using a PC can open them. I've checked the file extension, etc. I don't understand what I'm doing w

  • System Migration when add a SSD

    Recently, I purchased a SSD to improve the reading speed of my computer.  I am going to migrate the system from the HDD to the SSD directly without reinstalling the OS. I have tried several different softwares, like the Acronis True Image, or the EAS

  • Map My India is not working in my L.E

    the app is showing error as "We're sorry,but your device is not authorized to use this application" What i should do for this ?

  • Duplicate email account in iMac OSX 10.8.2

    Can I delete one of these two duplicate email accounts without affecting the other?