HT202731 Slow MacPro  Activity Monitor Red entry Installer Not Responding

MacPro 10.10.2 (14C109)   runs slow.  Run Activity Monitor   A red entry   Installer Not Responding.  I choose "send Signal to Process  KillSig or Quit Process will remove the red entry   but when i restart computer it agains run slow and red enter reappears
ac

You may have installed the "Genieo" or "InstallMac" ad-injection malware. Follow the instructions on this Apple Support page to remove it.
Back up all data before proceeding.
Malware is always changing to get around the defenses against it. In addition to the files listed in the support article, you may also have to remove the following in the same way:
~/Library/LaunchAgents/com.Installer.completer.download.plist
~/Library/LaunchAgents/com.Installer.completer.ltvbit.plist
~/Library/LaunchAgents/com.Installer.completer.update.plist
~/Library/Application Support/IM.Installer/Completer.app
One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those.
After removing the malware, remember to reset your home page in all the web browsers affected, if it was changed.
If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, then you may have one of the other kinds of adware covered by the support article. Follow the rest of the instructions in the article.
If you find Apple's instructions too hard to follow, ask for an alternative that doesn't require you to trust a black-box application without knowing what it does.
Make sure you don't repeat the mistake that led you to install the malware. Chances are you got it from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad would probably have included a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If you ever download a file that isn't obviously what you expected, delete it immediately.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere  should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Still in System Preferences, open the App Store or Software Update pane and check the box marked
          Install system data files and security updates (OS X 10.10 or later)
or
          Download updates automatically (OS X 10.9 or earlier)
if it's not already checked.

Similar Messages

  • Activity Monitor - Red Listing

    Hello,
    I was wondering how my MBP was running, so I took a look at the activity monitor. As many of you - I freak out if I see anything in "RED".
    I have one red line on the activity monitor which says: UserEventAgent (not responding). It is taking about 2.21 MB's in real memory.
    WHAT THE HECK IS THAT? How do I get rid of it ASAP?
    Thanks in advance...

    Select it then Force Quit

  • There ' is a panel that sayscopy' preparing to duplicate to "desktop". I clicked stop three days and it still trying to stop. Tried to 'force quit' does not show up, looked in activity monitor but i am not sure how it is listed. I am new to the mac world.

    there is panel in the upper right corner of my screen that says 'copy' preparing to duplicate to "desktop". I clicked stop three days ago and it is still trying to stop. Tried to 'force quit' does not show up in finder, looked in activity monitor but i am not sure how it is listed. I am new to the mac world.

    Force quit/Restart the Finder.
    Then for safety...
    Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.

  • On macbook pro photoshop is slow and not working.  In activity monitor I get switchboard nor responding

    photoshop bridge on my 3 year old mac pro has become inoperable.  In activity monitor is is using 180+ percent of CPU.  I also get switchboard not operating.  I deleted all of photoshop and bridge and reloaded them.  Same problem.  Does anyone know a solution.  Setting up a new user account has been suggested.
    Thank you

    Hi @Tom,
    Thanks for your response.  "Camera Uploads" is a folder in which Dropbox deposits all my photos and movie clips from my cameras.  It is a rather enormous folder likely exceeding several gigs of media.
    The file path is
    /Users/bpg/Dropbox/Camera Uploads/
    I really don't know the difference between "media" and "events".  I consider media a group or bunch of photos and movie clips.  I consider "events" a specific bucket or container of photos and movie clips.  If I should know more, a reference to documentation or an explanation of the difference would receive "This helped me."  If you could explain how to get FCPX working again (it just won't do anything beyond the splash screen), I will provide "This solved my question."
    Thanks for your help!

  • System running very slow - then Activity Monitor crashes

    I've this crash dump from Activity Monitor:
    Date/Time: 2010-01-30 21:29:07.939 +0200
    OS Version: Mac OS X 10.6.2 (10C540)
    Report Version: 6
    Exception Type: EXCBADACCESS (SIGSEGV)
    Exception Codes: KERNINVALIDADDRESS at 0x000000011b909000
    Crashed Thread: 0 Dispatch queue: com.apple.main-thread
    Then exactly the same thing at another time, but with a different address:
    Exception Codes: KERNINVALIDADDRESS at 0x000000011d391c00
    So it doesn't look like a memory fault. After a re-boot it's working OK, but clearly something is wrong. Any suggestions?

    Repair the disk permissions from Disk Utillty in the Utillities folder. See if this helps.

  • Trouble: activity monitor, disc utility etc not working - fan at full speed

    Good monrning - newbie post.
    I've been using leopard since it came out and after a reluctant upgrade the problems have been piling up...
    for the past couple of weeks the fan has been coming on almost immediately after startup, and not slowing down ever... I've upgraded to 10.6.6 in the hope this would fix it, but .... even did the massive combo update... then i thought i'd go into activity monitor to see what may be causing an overheat, but cannot open it. Also cannot open disk utility as it says it's still on 10.5.8 and not compatible... ?
    Console won't open either (not that i'd know what to do with it). but it seems as though system tools are not running as they should!
    ANy help from space out there would be really, really, greatly appreciated.
    Thanks, M

    ok, so for those following this thread - an update: hve downloaded atMonitor and found an old printer that was somehow still attempting to do stuff. Deleted this and so have immediately reduced the fan action.
    still, though, no joy with the regular system tools...

  • Why does airport base station show up in activity monitor if I do not have nor us it?

    Been having internet problems and been watching my activity monitor a lot. AirportBaseStationAgent shows up often as does loginwindowagent and a few other odd ones. This happens even when airport is off and I am doing nothing but watching the monitor.
    On a seperate but like issue - My internet is continually spotty and I stay online by running the dignostic thing in network. I hit it and it shows the last two or three lights orange for just a sec and then green...do again immediately same thing until I get green consistantly - then internet works fine for a bit and then have to do it all again. The first day I change router info or the first day i erased everything on my computer it did not do this and internet was great, but now back to having to run it constantly or weirdly, if I constantly run pages at say wiki I get less interruption. What is this? I feel like someone is on my computer and all I hear is how unlikely that is and why? I dont' know why, I just know it really seems that way.
    Any help on either question???  Please?

    thanks, figured it out..must have been a case of the fat fingers.

  • Why is PTP camera runnining in my activity monitor if I am not using it?

    I looked at my activity monitor and noticed that it was saying that something called a PTP Camera was running. I'm confused because my camera isn't on or anything. Can someone please tell me why it is saying this thanks :)

    Do you perhaps have, or have had or tried to set up, a multifunction printer/scanner/fax device on the system - or even on a prior system if you used Migration Assistant to set your MBA? I have seen a scanner service process on my iMac (running Snow Leopard) which is connected to an HP printer/scanner, though it only appears when the device is powered and connected.

  • Trying to re-install mac office 2011 (downloaded dmg) but installer "not responding"

    My Mac Word 2011 seems corrupted, so I downloaded a dmg (from my Amazonm Software account {I purchased the 2011 Office package on Amazon in 2011}) in order to try to re-install.  Interestingly, the downloaded dmg is a file named "Office_Mac_Home_and_Student_2011_1_User_3_Installs_OLD_VERSION_Downloader.dmg" .
    The problem is that the installer doesn't work.  It hangs every time with a "not responding" message appearing in the "force quit" window.
    I should be able to get some help from Microsoft, I suppose, but don't know who to call at microsoft.  By thye way, I have never hade to reinstall any software bought over the web (so that i do not have any DVD copy) so this is probably more confusijg to me because of that.  Thanks.
    I am using Snowleopard on an iMac
    Winston

    Why not simply re-download directly from Microsoft's website? Seems much easier going right to the source rather than using a reseller? Also if you have been backing up you can also restore from Time Machine which would be the easiest solution. Either way you will need the MS's install codes for re-installing the app.
    BTW locating MS's download site took all of a second to research using Google. I searched for Office for Mac download and found:
    http://www.microsoftstore.com/store/msusa/en_US/list/ThemeID.33363200/categoryID .62686000?tid=srugZITIq_dc&cid=5250&pcrid=22408403093&pkw=microsoft%20%2Boffice% 202008%20for%20%2Bmacs&pmt=b&WT.srch=1&WT.mc_id=pointitsem_Microsoft+US_google_5 +-+OMac+2011&WT.term=microsoft%20%2Boffice%202008%20for%20%2Bmacs&WT.campaign=5+ -+OMac+2011&WT.content=rugZITIq&WT.source=google&WT.medium=cpc

  • Zen Installer Not Respond

    I was in the process of installing the software for the Zen MP3 player, when the installer stopped responding.
    It installed the first three items, but now it is stuck and says "Installation is in progress. Please wait a while." It has been like that for the last half an hour.
    I do believe there is a problem.
    What should I do?

    Ok. Thank you very much for your help!

  • Adobe Flash Player Installer Not Responding

    I had to factory reset my computer and now it is not letting me instal Flash Player. I have gone through to make sure I downloaded all of the updates on the computer figuring that might have been the issue. I have reset the computer to make sure the updates are complete but still not getting any resolution.
    I am using firefox and the download works but when I get to the installer it stops working and I have to use task manger to get it to stop. Help please?

    Try this:
    1. Restart your computer to make sure there are not any Adobe processes are running.
    2. Click on the following Adobe link. Go to the bottom where it says "Still having problems" and click on the link for Firefox.
    Installation problems | Flash Player | Windows
    3. If this works for you, you might want to Bookmark this Adobe link for the future.

  • Under "History," a specific website with 6 line entries would not respond to the delete button. Is this a dangerous website?

    I delete websites I visit in "History" line by line, and I save the ones I find valuable for viewing in the future. Last week I visited a new website and checked out a few articles. A few days later I was deleting that day's line items I did not want to revisit. This particular website would not let me delete any of it's line items, no matter what. It was Just this website. Never have I encountered this problem. I had to go into Firefox and delete this particular website under "Forget this Site." Any answer as to why?

    ''guigs2 [[#answer-680061|said]]''
    <blockquote>
    That is how I delete individual websites from history, what steps were you taking to delete the site entry?
    </blockquote>
    I usually just highlight websites under a specific day of "history" and hit the delete button on my keyboard. Gone.
    When that didn't work for the one website, I tried right clicking that line, and a variety of other things. The specific website just would not go away. I just did not want to delete 7 days of history at one swipe of the delete key. Finally I went out to Firefox's 'Getting Started,' and in the left column was 'Privacy & Security Settings.' There is a section under Privacy & Security Settings called Delete Browsing Search and Download History. I read those items to see if there was something I was missing. One was called "How do I remove a single website from my history?" Followed instructions and just that website popped up. Highlighted those items from that site and deleted. Gone. Still do not know why the website would not delete in the first place. Makes a paranoid more paranoid about websites watching you.

  • Photoshop installation not responding or not progressing

    I'm installing photoshop and lightroom. Once I clicked on the download tabs for each nothing really happens. Just got a message that says Photoshop or Lightroom is downloading now. Its been like that for over two hours and nothing happens. Should Ive been prompted to other actions. Help Please!
    Thanks

    Joseg65466977 the installation request is not being sent from your current web browser either due to the current security settings or the AAM detect plug-in is not installed.  Please begin the installation process through the Creative Cloud Desktop application.  You can find additional details on how to install the Adobe Creative applications included with your membership at Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html.

  • Mac is running SUPER Slow, applications not responding when i open them, Beachballs everywhere

    Whenever i open an application (Take Google chrome for an example) it bounces like 20+ times, then on activity monitor it says "Application Not Responding". Whenever i type too fast on spotlight or finder, my whole desktop freezes, im suspecting this can be maybe HDD failure, i have repaired my MacintoshHD probably 3 times this past week. I have 150GB free out of a 250GB hdd, and i have 4 GB RAM. PLEASE HELP! Im currently enrolled in college and this is vital and needs to be fixed ASAP.

    Hi Rbmx1_,
    Thanks for using Apple Support Communities.  See this article for some steps to try if your Mac is running slowly:
    Mac OS X 10.6: If your Mac computer runs slowly
    http://support.apple.com/kb/PH6844
    Cheers,
    - Ari

  • IMac running very slow at times. Activity monitor showing hpdot4d using approx 500% cpu. How can I fix this?

    IMAC running very slow. Activity monitor shows hpdot4d using about 500% cpu.  How can I fix this?
    Using mavericks OS X 10.9.5
    Help!

    Have restarted computer, process hpdot4d has disappeared. Have printed a page from HP printer but computer fine now.
    Thanks.

Maybe you are looking for