HT202731 Yosemite on new MacBook Pro is not recognising Seagate or Lacie external hard drives
My Lacie external drive and Seagate external drive are not being recognised by my new MacBook Pro 13" retina with OS X Yosemite 10.10.1. Initially the Lacie worked, but that has dropped out - cannot find it in disk utilites.
Lacie is recognised by my friends computer with Maverick - OS X 10.9.5. Currently downloading data and will try to reconfigure the external drive. Is Yosemite truly not acknowledging other drivers? USB memory key is fine. Lacie has been my back up for some years, also Seagate, but on older computers. Suggestions needed to resolve this please.
Contact the manufacturers of Lacie and Seagate. You need to determine if the models that you have are compatible w/your new OS system and/or comp.
Similar Messages
-
2013 new Mac Pro will not boot up from and external hard drive
New 2013 MAC PRO running Yosemite will not not see a bootable external hard drive when starting up using option key? Same External hard drive will boot up on 2013 Mac Book Pro running Yosemite.
Reading between tea leaves sometimes leaves some things to imagination.
You used SuperDuper latest version that was recently upgraded for Yosemite on a laptop running 10.10 (or even 10.9.3+) that is in a X-brand USB3 drive enclosure, not bus powered btw, moved it to the nMP and plugged it into a direct port, not going through a hub (monitors have hubs of course and there is only one real bus+controller on the nMP that ALL USB3 travels through.
Thunderbolt and self-powered would be nice but they cost a bit more.
I have read where Carbon Copy Cloner (now v 4.x) worked where others failed. I use to use both but have used CCC since its inception and use back in 10.2.2 forward along with SD! for a few years based on comments here.
Drivers missing? someone compared system extensions and found the ones needed for say the nMP are not there? how about running a 10.10.1 combo update and see if that changes - we USE to be able to apply updates to a system that we were not booted from, very handy (could update a sparse disk image of a system that way, one created with CCC).
WD Passports seem popular with laptop users, but they come here to this forum complaining that it doesn't work, disappears off the bus (spins down goes to sleep, acts like a green drive acts). -
My new Macbook Air is not finding my 2 terabyte external hard-drive that is plugged in?
Hi,
I just got a Macbook Air. I need to use items on my 2 tbt external hd. It is plugged in but I do not see anything on the desktop. Whats going on??
thanks
CaraWhat are your Finder.Preferences>General?
Does it appear in Disk Utility?
Ciao -
Hi!
I'm trying to fix a problem I'm having with my iPhone 4S and MacBook Pro.
I did manage to connect it initially and set it up with XCode as well as iTunes.
Today I have spent two hours trying to connect it to my MacBook Pro and I have so far found the following...
iPod 2G - charges from MacBook Pro, Wall Charger, Asus Laptop (works with both my Apple USB cables)
iPhone 4S - doesnt charge from MacBook Pro, but does from Wall Charger and Asus Laptop
- Asus Laptop running Linux Mint recognises the iPhone as a device with 'lsusb' and you can browse photos etc
- MacBook Pro doesn't recognise the iPhone as a device with the 'systemprofiler' equivalent of lsusb
- Interestingly, despite the charging icon not showing, the iPhone either maintains charge or very, very slowly charges
when connected to the MacBook Pro.
Any ideas as to what might be wrong? I've tried both the USB ports on the MacBook Pro and no difference. I've tried the 6 ports
on my old Asus laptop and they all work fine!
Thanks for your help!OK.. Went to the Apple Store - they could either book an appointment with a Genius.. or send the phone for
testing and repair. Found out I have a 2 year warranty on it so have a year left.
My research has led me to assume that the USB 2.0 function of my iPhone was faulty from the day I got it (it kept disconnecting the reconnecting but transferred data fast), but soon stopped doing that and ran at about 1MB/s - USB 1.1 speed - and has done this ever since.
The MacBook Pro somehow is trying to use the USB2.0 function and is not letting the phone fall back to USB 1.1.
To test my theory I found an old USB 1.1 hub... plugged it into the MacBook Pro... then plugged the iPhone
into that. Job done. Charging fine, recognised every single time I connect, and only took a few secs to send over my XCode app to the phone and runs fine! I guess this works as the hub forces the iPhone and MacBook both to USB1.1 mode which then works fine! Will just use it like this for a few months then send it in at an opportune moment (want to get some apps out before I lose my device for repair for a while!)
I will in the next week or so test my iPhone on my friend's MacBook Pro (we bought them the same day but I didn't get the Retina cos I like to be able to upgrade RAM, Hard Drive, and replace battery when it wears out). I will also test their iPhones on my MacBook Pro to see whether it really is the phone or the MacBook!
PS I will get WiFi Sync running since transferring 60GB of data over USB1.1 won't be fun... will do a full factory reset on the phone just in case there is an issue there - will post results of this too! -
My MacBook Pro won't let me mount my external Hard Drive. Just trying to restore my iTunes library.
My MacBook Pro, less than a year old, started acting weird. I backed everything up, took it in to Best Buy, who sent it out to Apple Repair and they put in a new motherboard.
It's running on Mac OS X Version 10.7.4
Now I am trying to put everything back on the computer from my external Maxtor 80GB Hard Drive. MacBook Pro won't recognize the external drive.
I tried Disk Utility. I can see the external drive, and did a repair disk and verify disk. Several times. Each time it says "This partition map seems to be ok."
However, I am not able to mount it, as that option is greyed out and i can't select it.
Also, under the Icon for the external hard drive, it has the Macintosh HD Icon (essentially my computer). I tried to restore this way, didn't work.
I need this to mount, as it has all of my itunes stuff on it; dozens of my sons movies, and my entire iTunes library.
PLEASE HEEEEELP!! HOW CAN I MOUNT THIS EXTERNAL HARD DRIVE? Thank you in advanceTry things in this USB/Firewire faq.
DALE -
Why does Macbook Pro rename my Time Machine and other external hard drives?
Why does my Macbook Pro rename my Time Machine to "Time Machine I" and then back again periodically. Last night it was one name, this morning it is another. It also does it on other external hard drives - usually by adding a I after the name. It is frustrating for me because I store a large runtime folder on an external hard drive and end up losing a lot of time with my computer not being able to find files because of the renaming.
And even though it still looks like Time Machine under "Get info: - when I open a folder window or Disk Utility it has a new name, and there is no way to change it. I've seen other questions that mention Macs renaming themselves, so it seems like a similar issue. I did try deleting the preferences plist file, but that did not work.
Is this a glitch with this particular model or operating system?
Specs: Macbook Pro A1297 - 2009 model.
Snow Leopard 10.6.8
2.8GHz Intel Core 2 Duo
8GB ram
Many thanks for any advice.nachdenki wrote:
strange, my external HDs were added to the exception list automatically. maybe because they wouldn't fit on the time machine volume.
It seems to depend on when the drives were connected. When you first turn Time Machine on, it only excludes the TM drive itself, and any drives not formatted HFS+.
If you connect a drive later on, that drive will be excluded automatically. -
My Macbook Pro won't let me use my external hard drive anymore, Help!
Every time I go to time machine it has my internal hard drive as the back up drive, when it should be my external hard drive. When I tried to select my external hard drive it doesn't do anything, it goes right back to the internal hard drive. Time machine and my external hard drive had worked the night before and I havent had any problems backing it up until I loaded Mountain Lion. I dont know if that could be one of the reasons or not. Also the hard drive is almost full, however I thought that this couldn't be the problem because I have it set to automatically delete stuff when full. Also the ownership is not set and I can't enable it. I have looked around and there is not an "ignore ownership" box to check from get info... I am lost and somewhat new to macs so any help would be appreciated.
if she's not the only person with Mac and this problem - go to school network administrator, something wrong.
If there are other people with macs and without this problem - compare network settings.
Also disabling 'Stealth mode' can help sometimes.
see p8 here to find setting. -
MacBook Pro will not read files on Lacie External HD
Yesterday I had a heck of a time getting my macbook to even see my Lacie HD. I downloaded a new driver installed in and it worked well. Everything was running perfectly. I ejected the HD and finished my day.
Today my Macbook sees my HD but when I click on it to access the files none are inside. It just gives me the option to autorun. Which also doesn't work.
Can anyone give me some help with this?
Thank you in advance.Are you using a retail 10.6 disk that looks like this?
and not the gray install disks that look like this? The Gray Disks are machine specific and only have the drivers for the Mac that they shipped with. -
New MacBook Pro doesn't recognise external Freecom HHD
Just got myself a brand spanking new 15” MacBook Pro with the i7 processor running (obviously) OS X 10.6.3.
My problem is the machine does not recognise my Feecom 400GB external hard drive (USB). Doesn’t show up in finder or under disk utility. And of course it’s the drive with all my itunes stuff on it.
Strange thing is the drive shows up fine on my black 2008 MacBook (also running 10.6.4) and my old Powerbook, as well as on another PC.
Any ideas what I could try/could be wrong? The new MacBook Pro does recognise some other external usb hard drives I have.
Cheers,
RebI would try using Disk Utility to do a Disk Repair, as shown in this link, while booted up on your install disk instead of just a verify. A verify doesn't do anything and may not report all issues.
You could have some directory corruption. Let us know what errors Disk Utility reports and if DU was able to repair them. Disk Utility's Disk Repair is not perfect and may not find or repair all directory issues. A stronger utility may be required to finish the job.
After that Repair Permissions.
No need to report Permissions errors....we all get them.
Here's a USB faq.Here's Apples article.
DALE -
Trackpad not working on brand new Macbook Pro 15" not retina,
I've just got from UPS my new Macbook Pro 15" not retina. It's the basic model, without upgrades.
I've plugged it in and turned it on to go through the setup assistant, but I had to do it with the keyboard and an external USB mouse, because the internal trackpad is not responding at all. Is it normal?
Thanks!That was the first thing I did. They told me that it was normal, but I don't believe them. They told me to wait until installation was complete and perform updates, and try after that. That's what I'll do, but I suspect I'll have to have it replaced.
Right now I'm migrating my old mac to this one. I'll update as soon as migration is complete. -
New Macbook Pro does not start up after updating...HELP!!!
Hi,
My new Macbook Pro does not start up after it got updated. The first time I used it, it was perfect. I updated it and restarted it when it told me to but it doesn't boot. It shows an apple and a spinning circle when it turns on but that's it.
Can somebody please help me?You should probably post your question in the MacBook Pro discussions:
http://discussions.apple.com/category.jspa?categoryID=190 -
New MacBook Pro will not download Mountain Lion. The App store simply has a dead download button. Any help?
If it's new, read. http://www.apple.com/osx/uptodate
-
Purchased Lightroom software on disc, new MacBook Pro does not have a disc drawer.
Purchased Lightroom software on disc, new MacBook Pro does not have a disc drawer. Have already opened box. Searched online and someone suggested downloading the LR trial, and set up Cloud, then can enter the serial number to complete the purchase. Which is what I did, but the serial number is being rejected.
Ok, maybe what they’re calling Creative Cloud is merely your Adobe ID, an e-mail and password to login with. The LR5 6 update link is probably what you want to download—all updates are downloads, anyway, so there’s no need to have a disc reader as long as you have internet and the serial number.
Here is the LR 5.6 update for a Mac: http://www.adobe.com/support/downloads/detail.jsp?ftpID=5822
Another issue might be that what you think is a serial number is a redemption code that needs to be converted to a serial number using this website: http://www.adobe.com/go/getserial A clue that you have a redemption code is that it has letters and numbers. A serial number is just numbers and the first few are 1160-something. -
Can someone please help me re-install my Creative Design 5.5 on my Mac? My MacBook Pro recently crashed and had to have the hard drive replaced. The back up from Time Machine is not reinstalling the program. Since I have the download paid, and codes, I need direction on how to reinstall -- HELP?
Hi bodegakc,
If you have the serial number then please use the below mentioned link to download the product you are looking for .
CS5.5
Also before installing Please go to Applications-->Utilities--> Adobe installers and if there is any uninstaller for CS5.5 , you can remove it and do a fresh install.
You can also use creative cloud cleaner tool before installing.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Thanks
Nikhil Gupta
Maybe you are looking for
-
how can i fix my iphone i can't update or download apps, when i try it tells me toput my credit card info and i do but when i push done it tells me my payment has been declined, but why do i have to pay to update or download free apps. How can i fix
-
What does all does metadata fields mean?
So far, I haven't yet created a personalized Metadata Preset for all my photos because I don't understand most of the fields, what they exactly mean and where is that value going to be displayed/read by. Can anyone help me on that or point to me to a
-
Latest groovy library (Json slurper) not working in ODI 11.1.1.5.0
Hello, My procedure in ODI is failing as I guess I'm trying to use a groovy library (Json Sluper) which is not available in ODI 11.1.1.5.0 . The error I'm getting is 'unable to resolve class groovy.json.JsonSluper'. Has anyone faced this issue and kn
-
I have successfully set up two servers in a cluster and started to test out an application. One issue I am having is that the CSS that is being imported into the page via @import url("screen.css") is not being found. If I do a cfinclude then it seems
-
Allowing user to create new Apex User
Hi, I have a requirement that a certain user group needs to create new users to use Apex application. With my understanding, no user can create new user without apex admin privilege. I can't give admin privilege to any user. Is there any workaround?