HT202769 Apps cannot be launched from the control centre when the phone is locked?
I'm using an iPhone 6, running iOs 8.3.
There is an issue when I try to launch any apps from the Control Centre while my phone is still locked.
For example, if I launch the camera from the Control Centre while the iPhone is locked,
the camera will launch, but within the next second, the screen will black out.
So for me to use any apps from the Control Centre, I have to first unlock the phone, then launch the app.
Has anyone faced this same problem and have a solution to it?
Reset device: press both home and lock buttons for at least 10 seconds, releasing when the Apple logo appears (no data loss).
Reset settings: Settings > General > Reset > Reset All Settings
Restore: Use iTunes to restore your iOS device to factory settings
Similar Messages
-
I am not able to see the missed calls when my phone is locked.
I am not able to see the missed calls when my iphone 3gs is locked.And how to set own ringtones in iphone 3gs
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons... -
Why can't i find the airplay icon in the control centre ?
i have an iPad version with iOS 7.1.2 with capacity of 28.3GB. I also have apple tv and both are using the same wifi network. I have previously been able to link various apps to apple tv using airplay but now the airplay icon does not appear at the bottom of the screen as before. I have tried to fix this by going to the control centre but the airplay icon does not appear there either. What should i do ?
If you don't see the AirPlay icon in Control Center:
1. Turn off router, Apple TV and iPad
2. Turn on router and then wait 30 seconds for it to complete start-up process
3. Turn on Apple TV and then wait 30 seconds for it to complete start-up process
4. Turn on iPad and test AirPlay -
Hi everyone
I've updated to IOS 7 and lost the Airplay, there is nothing in the control centre as the trouble shooting pages suggest how it should look, any suggestions please. ThanksRestart iPad
1. Hold down the Sleep/Wake button until the red slider appears.
2. Drag the slider to turn off iPad.
3. Turn iPad back on, hold down the Sleep/Wake until the Apple logo appears -
I have just downloaded Mountain Lion but my iPhoto app cannot be launched as it says the original app cant be found. It takes me to where is says its located but its not there. What to do?
Reinstall it?
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store or have a Recent Mac you can find it in your Purchases List. -
I cannot print wirelessly from Macbook Pro: this is the error message I receive /Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpII.app/Contents/MacOS /rastertoescpII failed. Can anyone help. I have been able to print on this printer for months, then yesturday out of the blue I get this error.
"/Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpII.app/Contents/MacOS /rastertoescpII failed"
I also saw this same error message above the Print Queue, ever since allowing the Epson Printer Software Update (August 2013) to install. After this update installed, I was able to print a basic Test Page from the Print Queue, but when printing from any application I only got "Looking for printer..." displayed above the Print Queue, which would stall and never print.
2008 MacBook, 10.7.5. It used to print to my Epson WorkForce 845 wirelessly without problems, before this software update was installed.
Changing the driver from "Epson WorkForce 845" to "Epson WorkForce 600 - Gutenprint v5.2.3" was a workaround that did allow me to print, but I wasn't satisfied with that.
Found this better solution in https://discussions.apple.com/thread/5233149?start=0&tstart=0
(with thanks to Yuengdog1983):
This issue may be a result of the Computer Name being left empty:
Open System Preferences and choose Sharing.
Enter a name for your computer.
Even without restarting the MacBook, I was able to now change back to using the Epson WorkForce 845 driver v9.0 successfully. I never would have guessed that a Computer Name is required in order to print! -
Issue Summary
In Java 1.7 Update 71, Java 1.7 Update 72 and Java 1.8 Update 25 Deployment Rule Sets do not properly launch the latest available version from the JRE6 family when the jpi-version is specified by the RIA. We've noticed this with Oracle Forms and Reports 11g where we have forms that specify Java 1.6 Update 20. We used to be able to specify Java 1.6 Update 26 in our Ruleset, but now the only version a that works in our ruleset is Java 1.6 Update 20 which is the same version requested by the JPI-Version attribute of the jar. The long term solution would be to upgrade Oracle Forms and Reports, however this isn't currently in the cards.
RuleSet.xml Test
Ruleset.xml
1
2
3
4
5
6
7
8
9
10
11
<ruleset version="1.0+">
<rule>
<id location="*.javatester.org" />
<action permission="run" version="1.6*" />
</rule>
<ruleset version="1.0+">
<rule>
<id location="*.internaldomain.name" />
<action permission="run" version="1.6*" />
</rule>
</ruleset>
Test 1 (Control)
Installed Java Versions:
– 1.7 Update 51 b13 (both x86 and x64 however x86 is invoked)
– 1.6 Update 26 b03 (both x86 and x64 however x86 is invoked)
Deployment Ruleset works as expected for both URLs
Test 2
Installed Java Versions:
– 1.7 Update 72 (both x86 and x64 however x86 is invoked)
– 1.6 Update 26 b03 (both x86 and x64 however x86 is invoked)
The RuleSet works for JavaTester.org however on internaldomain.name we get the following error:
With the trace logging turned on, I suspected the version attribute supplied by the RIA. I was able to trick Java by adding the following to my system deployment.properties file:
deployment.javaws.jre.0.product=1.6.0_20
deployment.javaws.jre.0.path=C\:\\Program Files (x86)\\Java\\jre6\\bin\\javaw.exe
deployment.javaws.jre.0.enabled=true
Because the RIA requests 1.6.0_20 it matches 1.6* from the deployment ruleset sooner than 1.6.0_26. However, if 1.6.0_20 is not available 1.6.0_26 should match according to the Deployment Rule Set documentation:
http://docs.oracle.com/javase/7/docs/technotes/guides/jweb/security/deployment_rules.html
The version of the JRE that is used is determined by the following order of precedence:
1. The current version of the JRE is used if it is available and matches both the version attribute and the version requested by the RIA.
2. The latest available version of the JRE is used if it matches both the version attribute and the version requested by the RIA.
3. The current version of the JRE is used if it is available and matches the version attribute.
4. The latest available version of the JRE is used if it matches the version attribute.
If no version is available that meets the criteria, then the RIA is blocked, and a message is shown to the user. To provide a custom message, include the message element.
As a result:
If Java 1.6.0_20 is listed in the version requested by the RIA and 1.6.0_20 is listed in the deployment.properties file, #1 matches.
If Java 1.6.0_20 is listed in the version requested by the RIA, but 1.6.0_20 is NOT listed in the deployment.properties file the #1 SHOULD match, but doesn’t. It used to match up-to and including JRE 1.7 Update 51 however the ruleset appears to no longer match in subsequent versions.
#2 should never match with our current Deployment Ruleset. It would match if we specified 1.7* as a version in the Ruleset.xml.
#3 used to be broken as well after JRE 1.7 Update 51 however this bug has been marked as fixed. See: http://bugs.java.com/view_bug.do?bug_id=8032781
I have reproduced this issue with Java 1.7 Update 71, Java 1.7 Update 72, and Java 1.8 Update 25 when one of these versions are installed with Java 1.6 Update 26.I can't seem to edit this post anymore, for some odd reason.
So here goes;
I found this post in NVIDIA's knowledge base;
When installing an after-market graphics card into a certified Windows 8 PC with UEFI enabled, the s...
The interesting parts in this post are as follows;
When an after-market graphics card is installed into a motherboard with UEFI enabled in the system BIOS, or if the system is a certified Windows 8 PC with Secure Boot enabled, the system may not boot.
UEFI is a new system BIOS feature that is provided on most new motherboards. A UEFI system BIOS is required in order for the Windows 8 Secure Boot feature to work. Secure boot is enabled by default on certified Windows 8 PCs.
In order to get the PC to boot with a graphics card that does not contain UEFI firmware, the end-user must first disable the secure boot feature in the system's SBIOS before installing the graphics card.
Note: Some system SBIOS's incorporate a feature called compatibility boot. These systems will detect a non-UEFI-enabled firmware VBIOS and allow the user to disable secure boot and then proceed with a compatibility boot. If the system contains a system SBIOS the supports compatibility boot, the user will need to disable secure boot when asked during boot process
This leads me to believe that the BIOS update that wrecked my setup was 9SKT58A/9SJT58A, which only contains one change;
"Adds support for updating BIOS from a WIN7 BIOS to a WIN8 BIOS".
I've just ordered a cheap UEFI-compatible GT640 from Gainward, so I hope I'll be able to try that out this weekend. -
Hi i currently cannot swipe up to get to the control centre on my iphone 4. So am unable to swith the do not disturb off therefore are unable to use my phone
Do not disturb is also accesible in settings, so you may be able to temporarily avoid the issue by allowing calls from everyone and having it only silent while locked, or perhaps secheduling might work. Other than that, restarting your device may be an option.
Is there any reason you know of that might be making you unable to access control center? -
i have iphoto previously installed. running but when i have synced my iphone4 the iphoto app. cant be launched anymore. a black screen with the hourglass running till it quits automatically. What should be the problem???
Try the two fixes below in order as needed:
Fix #1
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your HD/User/Home/() Library/Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your HD/User/Home()/Library/Caches/com.apple.iPhoto folder.
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
Fix #2
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Click to view full size
OT -
Camera App Won't Launch from Lock Screen after update
After updating to ios 8 and then 8.1 my camera app will not launch from the lockscreen. When I swipe up on the camera app I see my home screen wallpaper until I press the home button or the lock button.
Hey morpeo,
Thanks for the question. Let’s see if we can isolate the issue further. To do so, try restarting/resetting your device:
Turn your iOS device off and on (restart) and reset
http://support.apple.com/kb/HT1430
If the issue persists after a restart, let’s see if we can isolate to software or hardware by backing up and restoring your device as new:
iOS: How to back up your data and set up your device as a new device
http://support.apple.com/kb/HT4137
After erasing and setting up as a new device, your device is now in a factory configuration. Test to determine if erasing and setting up as a new device resolved the issue. Content on the device may have caused unexpected behavior.
If the issue is still present, you may want to contact Apple Support.
Thanks,
Matt M. -
I have several users in an exchange environment who cannot email a photo from the iPhone. When the click on Email Photo, they are prompted to configure a mail account even though there is already an exchange account in place. How do I remediate this? Not all of the users in our environment have this issue. If the users having this issue, install a secondary email account, Gmail, Hotmail, etc, then they can send through those accounts. Why would the exchange account not be seen to send photos?
Sounds like it worked until the policies associated with the account that are creating the problem were fully pushed down.
Try setting up a new (test) Exhange account and see if it behaves the same way on the phone (after removing the problem account from the phone, of course). -
i bought a used iphone 4 today. how to transfer all my old and important data including apps and email settings from old iphone 3gs to the used iphone 4? that means, making the iphone 4 just like the iphone 3gs?
Well, you sink everything on your 3GS onto your laptop/computer. Then you reset your iPhone 4. When you are restarting it, add all those apps music (ect) On to it. It seems difucult but for more info call Apple. I did that and he lead me step by step on how to do it. Well hope this helped~~
-
Hi, I just got my Iphone 5s when I open my camera when my phone is lock te icons of the flash and the reversing camera is there, but when I try to open my camera from the apps camera the icons of the flash, the reversing camera is not there anymore?
Have you tried restarting or resetting your iPhone?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPhone shuts down, then press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). -
my mac app store has disappeared from my dock and when i pull it up in finder it says it is damaged. how can i download the mac app store software?
Delete the App Store app by dragging it and dropping it into the Trash. Then download and install the appropriate update combo for your version of OS X;
Install new MAS app -
OS X Mountain Lion 10.8.3 update combo
http://support.apple.com/kb/DL1640
OS X Lion 10.7.5 update combo
http://support.apple.com/kb/DL1583
OS X Snow Leopard 10.6.8 v1.1 update combo
http://support.apple.com/kb/DL1399 -
I cannot hear the audio from my Apple TV when the speakers connected to an airport express is selected from AirPlay
me-p wrote:
Is it true?
for the time being, yes.
however, Airfoil can do what you want.
Maybe you are looking for
-
Send .vdu,.txt files (File adapter)
Hi Everyone, I have a bunch of text files with different extensions (.TXT,.VDU ETC) Would like to FTP these files to different server. Here is the problem "I want to send these files directly to the receiving file server". Should I use File con
-
BOM and Routing import is not populating data in base table.
BOM AND ROUTING INTERFACE Import Prog is not populating base table with interface data.Even the Interface table data is not processed.I am passing process flag as 1 and transaction_type as INSERT,still the ROUTING INTERFACE TABLES are not getting pr
-
Filtering with wildcards in af:table
Hello! We are using af:tables with filter bars. By default, attributes of Java type String are filtered with an additional wildcard at the end, respectively they are using the STARTSWITH operation in the ViewCritieriaItem. This behaviour is done in c
-
Financial Report/Batch report deletion by mistake
Hello Gurus, We seemed to have deleted one of the Financial Reports and one batch report from the Workspace folder. Is there any way to check and see if it is stored in some place in the hyperion directory. Thanks
-
New book on iBooks Author now in store
Maria Langer's long awaited second book on iBooks Author is now in the store. It was created using iBooks Author and includes 3 hours of screencast video instruction.