HT202809 i cannot connect airplay with my computer

Airplay icon existing on the bar.
By pressing to connect and after while an error message
appears
"the Could not connect to “Living Room Apple TV”
Your kind advice needed
Thanks in advance
Stavros

what network are you using?
wifi g networks don't work well with airplay, you need at least n wifi.

Similar Messages

HT5706 I just purchased an AppleTV and am trying to connect AirPlay with my mac (2012 model) In 'system preferences displays' an airplay menu is listed but it says 'no device detected'. My AppleTV and macbook are connected to the same network. Any help?

I just purchased an AppleTV and am trying to connect AirPlay with my mac (2012 model) In 'system preferences > displays' an airplay menu is listed but it says 'no device detected'. My AppleTV and macbook are connected to the same network. Any suggestions why it is not working?

Troubleshoot the network as that is likely what is causing the issue.
Also, temporarily disable the firewall on the Mac and disable IPV6 on the computer.

Itunes cannot connect even with wifi on? help?

Itunes cannot connect even with wifi on. Any ideas? I have reset wifi connection and that didn't work.

Connect to iTunes on the computer you usually Sync with and “ Check for Updates “...
If an Update Appears Install it... if not... you are up to date for your particular Device...
See the Using iTunes Section Here...
How to update your iPhone, iPad, or iPod touch

HT201246 what shall i do if i forgot my ipod 5th gen password and i cannot connect it to a computer???????

what shall i do if i forgot my ipod 5th gen password and i cannot connect it to a computer???????
ALSO THIS IS THE FIRST TIME SWITCHING ON MY IPOD IN 5 MONTHS

If no computer:
Only if:
If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone and use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
You can also wipe the iOS device by installing the FindMyiPhone app on another iOS device and using that app to wipe the device.
Otherwise you need a computer with iTunes and an internet connection
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

HT201263 Hi my iphone 5 is on recovery mode and I connect it with the computer but it's failing to restore the device the message is showing iphone restore failed!!!!!

Hi my iphone 5 is on recovery mode and I connect it with the computer but it's failing to restore the device the message is showing iphone restore failed!!!!!

Hi Bobi1346,
Thank you for visiting Apple Support Communities and for including the error number you are getting.
There's an article for troubleshooting that error.
iOS: Restore errors 4005, 4013, and 4014
Try these steps to resolve the issue:
Install the latest version of iTunes.
Restart your computer.
Make sure your computer is up to date. If an update requires a restart, check for updates again after you restart.
Learn more about updating OS X.
Learn more about updating Windows.
Restore using another USB cable.
Restore your device on another computer.
If you continue to see error 4005, 4013, or 4014 when you restore your device, contact Apple for support.
Take care,
Nubz

Just bought a preowned palm organizer model TX. I cannot sync it with my computer

Just bought a preowned palm organizer model TX. I cannot sync it with my computer. the handheld device has the previous owner's name. how do i change the user name on the device

Perform what is referred to as a Hard Reset. It will delete everything including the previous owner's Hotsync ID.
Check out this Palm Knowledgebase article to read about how to perform a Hard Reset.
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android

Ithis ipad is supervised by another computer cannot be used with this computer help

i need help this ipad3 is supervised by another computer and cannot be used with this computer please help me i do'not know what i should be do help thanks

It depends of what type you have. If it is your own personal iPad you should have any problem but if it is a school owned iPad then you'd have to ask the teacher who ever gave it to you. I have a school owned iPad and I e-mailed someone about it and asked and she told me to use cloud but I am/was confused and I will try again soon.

My pad2 and Ipad3 cannot mirror airplay with my appleTV 3gen

I try to to airplay my Ipad 2 and Ipad3 with my new appleTV 3 gen but it cannot connected.
I double click the home botton on Ipad2 or 3 i show the airplay Icon and i click on the appleTV and Mirror on but the mirror will continuing blinking with a blue bar on top of the ipad like it trying to connect but then it went back to ipad can cannot connected. I updated both firmware on my ipad and my AppleTV. Using same internet. my route is Linksys E4200.
PLEASE HELP ME WHY.

Likely a network issue.
Here are some tips
http://support.apple.com/kb/TS4215

Cannot connect Words with friends with Facebook

Ever since yesterday after I updated my ipad mini , words with friends app will not connect with my facebook wwf app. I have unistalled and reinstalled numerous times and it still says cannot connect to facebook.I can sighn in with an email address but that does not give me my games from facebook,.....I have no trouble with the facebook app itself that is working correctly, or any other of the apps I play through facebook ie, towers and candy crush, just words with friends.!!!!!!, HELP PLEASE!!!!!

ools > Options > Privacy Tab > Enable "Accept third-party cookies" (for more security set "keep until" to "I close firefox"
This did not help. This problem began after I upgraded Firefox. Words with Friends loaded the game but did not load my games or friends from Facebook. It works with Internet Explorer. We prefer to use Firefox. I am using Windows XP Service Pack 2. Are there any other suggestions?

Bluetooth cannot connect ipod with Ipad2

I cannot get my Ipod touch paired with my Ipad2, Is it me or it is something wrong with the software?, I can connect either one with my Mac but cannot connect neither share files between Ipod and Ipad.

There is nothing to do. This has never been a feature of the ipod.

NAC 3310- cannot connect to with serial connection

I have (2) 3310 NAC appliances that someone else set up and configured. I need to access via a serial connection to my laptop to upgrade the software. I cannot connect via Hyperterm. I have 4 other NAC appliances that I can connect to fine via direct laptop serial connection. My hyperterm settings are correct. Log files do not show anything that could be causing this (per TAC). I can access via ssh over the network, and through the web gui.

Short description is, I serial connected to the CAS's to do
a software upgrade, and could not get a connection to either of them. Through troubleshooting it seemed there were other issues going on with the Active CAS. Once I rebuilt (re-installed software) and reconfigured the HA pair, I was able to serial connect to both and then proceed with the upgrade.

Cannot connect remotely to home computer

I would appreciate some troubleshooting help, with regard to my inability to connect to my home computer from my iBook, which is in a remote location.
At home, I have an iMac connected to DSL, using a Belkin router. I have opened up port 548 on the router, which is supposed to allow access to my files from outside the home network. I have also turned on file sharing in system prefs.
At work, I'm connected to the Internet via a Windows-based network (but using an iBook). I go to Connect to Server under the Go menu, type in the afp address of my home iMac that was indicated under the home machine's sharing prefs., but then nothing happens. Well actually, I get a message that the server can't be found.
I know my home computer is on (I made sure it wouldn't sleep), and I opened up the port that is for afp, so what could be the problem?
Thanks for your help.

Could be something with that port. Have you tried Remote Login through shh to see if that worked?
If you allow remote login, you can use SSH (Secure Shell) to log in to your computer from another location.
You can't use Telnet to log in to the computer.
Open System Preferences and click Sharing.
Click Services and select the Remote Login checkbox. Selecting Remote Login also also enables the secure FTP (sftp) service.
Now you can use an SSH client to log in from another computer.
For example, if your user name is steve and your computer's IP address is 10.1.2.33, you can open Terminal on another Mac OS X computer and type:
ssh -l steve 10.1.2.33
Type "man ssh" at a Terminal shell prompt for more information.
See this Apple page for more:
http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh294.html
For Personal File Sharing do this:
1. Be sure you are already connected to the Internet.
2. Choose Connect to Server from the Go menu.
3. In the Address field, type either the IP address or the DNS name of the computer to which you wish to connect (Note 4).
4. Click Connect.
See this Apple Page for more.
http://docs.info.apple.com/article.html?artnum=107369
Also you may have a OSX firewall on or 3rd party firewall that is blocking this port.
Personal File Sharing uses 548, and 247 for it's ports.

Cannot home share with my computer, cannot home share with my computer

i have checked my apple TV are connected to my wifi internet. my computer has turned on the home sharing function. but i still cannot access my computer movies and songs from apple TV. the software version in appletv is 5.2(6010.96) and my itune version is 11.02(26). anyone experience the same problem?

Have you tried restarting your ATV? This is a common problem with 5.2. Unfortunately, restarting your ATV is not a permanent fix. It will happen again.

Connection issues with one computer - but not any other computer or iphone

I have a strange problem…. well, really it is my friends/co-workers problem, but I am his sponsor so I feel I need to be there for him.
We are both school teachers - and to help us in the eduction of our students we have created a wireless network (hidden so we don’t get caught!) that we can use in our area of the building. We have had it for several years and we have both hooked up to it regularly using our laptops and our ipod touch/iphone. Just recently my co-workers computer stopped being able to access the internet through the airport. We checked the settings, threw out the settings and re-entered them. Turned off the airport, turned it back on - typed in the network settings, connected - but no internet. We ran disk utility and repaired disk permissions. We have even gone as far as to create a new user…. still no luck. I have shut down and restarted the airport at school, still the issue remains.
He can see the shared disk attached to the airport, he sees my itunes library, I see his - and the rest of the teachers in the school see both of ours (we are music teachers, so our libraries are rather extensive!) and are constantly listening to our shared libraries. We know he is connected to the network, he just cannot access the internet. However, when he plugs in to the network (same settings) via ethernet - there is no problem he gets right into the network.
We both have airports at home - and we both have no problems connecting at home.
There are only two things that have happened since we noticed this problem… 1) is Snow Leopard - we believe the problem started AFTER that upgrade. and 2) we just got a new iMac Lab (I am teaching a new class - Audio Engineering this year) and in the lab I put a legal Airport - but that one IS NOT connected to the school network at all - it just allows all of the iMacs to access the shared hard drive (easier than running cable). This airport (new one - two channel) sits between his office and the old airport (single channel) that we use to access the internet and school network. I don’t think this is the problem as I have turned off the “new” airport and the problem remains.
Any ideas or suggestions would be greatly appreciated!!

Hi,
Sounds like you had the same problem I had, which I resolved:
http://blog.irreverence.co.uk/?p=467
Hope it helps.
Kenny

Cannot connect Vixia R300 to computer

I have a brand new Vixia R300 and I cannot get my MacBook Pro to recognize it.....tried all the rouble shooting solutions and still get the "no camera was found" message ...HELP!!!

Dear mccarthy3908,
We are sorry to hear that you cannot get your Mac to recognize your VIXIA HF R300. We will do what we can to resolve this, but the forum may be a difficult way to troubleshoot this issue. The software which comes with your camera needs to be installed first, before you connect the camera. Try using a different USB port and avoid using a USB hub to connect. Ensure that you have a fully charged battery in the camera, or use an AC Adapter. The VIXIA HF R300 should mount to the desktop when properly plugged in and connected.
If you continue to experience issues connecting, we recommend getting in touch with our technical support team, either on the phone or through email.
You may call our special toll-free number by dialing 1-800-828-4040, Monday - Friday 10:00 a.m. - 10:00 p.m. ET (excluding holidays).
To reach us by email use the address: [email protected]
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

HT202809 i cannot connect airplay with my computer

Similar Messages

Maybe you are looking for