HT203088 Where is EOS-M3 support in Digital Camera RAW 6.04????

No support for EOS-M3???? What a **** is going on?

Camera RAW ≠ Camera driver, the RAW update is for the .CR2 canon raw image file (in your case) compatibility.
What happens when you try to import photos using Image Capture or iPhoto?
Can you take a screenshot of the error message?
I always prefer and recommend using memory card import over using the camera.

Similar Messages

  • Digital Camera RAW Compatibility Update 3.13

    Digital Camera Raw 3.13 just released
    Supported by Digital Camera RAW Compatibility Update 3.13
    Canon EOS-1D X
    Nikon D800E
    Nikon D3200
    Olympus OM-D E-M5
    Panasonic LUMIX DMC-GF5
    Sony Alpha SLT-A57

    Well done code cutters at Aperture.  At first glance the Digital Camera RAW Compatibility Update 3.13 seems to have fixed the problem.  The quickness of your action is appreciated!

  • Digital Camera RAW Compatibility Update 6.04

    OS X Yosemite: Supported digital camera RAW formats - Apple Support
    Supported by Digital Camera RAW Compatibility Update 6.04
    Canon EOS 5DS*
    Canon EOS 5DS R*
    Canon EOS Rebel T6i / 750D / Kiss X8i
    Canon EOS Rebel T6s / 760D / Kiss 8000D
    Fujifilm X-A2
    Hasselblad CFV-50c
    Hasselblad H5D-50c
    Leica C (Typ 112)
    Nikon 1 S2
    Nikon D7200
    Olympus OM-D E-M5 Mark II**
    Panasonic LUMIX CM1
    Panasonic LUMIX DMC-GF7
    Pentax MX-1

    Download it directly from Apple and apply;
    Digital Camera RAW Compatibility 6.02

  • Is every Digital Camera RAW Compatibility Update necessary?

    Knowledge base doc (http://support.apple.com/kb/HT3825) says  “Mac OS X v10.6 Snow Leopard provides system-level support for digital camera RAW formats.” so I assume a system update includes Digital Camera RAW Combatibility updates.
    Before I updated from 10.6.6 to 10.6.8, SU showed I needed Dig Cam RAW Com update 3.7 which I didn’t do.  After the update to 10.6.8, I needed 3.12 so v3.7 through 3.11 must have been included in the OS X update.  Before I got around to doing 3.12, I found SU showed 3.13; I assume each update includes the past ones as well.
    My cameras, Samsung Pro 815s, predate the updates.
    I continue to do the updates thnking there might be some unmentioned secuirity issues included in the update that are not mentioned, but -- really -- is it necessary to keep doing these particular updates?
    Do folks continue to do these ad infinitum as new cameras are added?
    Should I eventually purchase different cameras, could I then find the relevant update and just install it?

    In my first post I mentioned:
    Before I got around to doing 3.12, I found SU showed 3.13; I assume each update includes the past ones as well.
    You, TD, kindly added this information - thank you:
    Further, Camera Raw updates get rolled into the next OS update anyway, so the next time you update your OS you catch up anyway.
    However, I’m running 10.6.8 and probably staying there - so no more OS updates for me.
    I do updates manually checking SU first.
    As I said above, when I didn’t do 3.12 update (but I did download the installer), it was later replaced in SU by 3.13. 
    It really is not a big deal, but just a matter of curiosity - do you know if the update for 3.12 was included in 3.13?  (The list of supported cameras for 3.13 does not include the one for 3.12.) 
    As I said, it matters not, just curious how smart SU really is (because I have another really big issue with SU and am just waiting to ask that question later...)
    Thanks again,
    Mrs H

  • Unable to update to Digital Camera RAW Compatibility Update 5.03

    This is probably an Apple Update issue, but is anyone else experieincing a greyed out Update button.  I restarted and the update button was available again.  Initieated download, but got no message about installing our any success in updating it, so for now it remains in my update available pane for several days.  Real pain!  Any ideas on how to force or troubleshoot this update issue?  Running Mavericks 10.9.1

    What is your Aperture version? Is it compatible with the latest raw support? At least Aperture 9.4.5
    Any ideas on how to force or troubleshoot this update issue?
    Have you checked, if the update has actually been installed? You can see in the "About" panel the version of raw support that Aperture is using.
    If the raw support has not been installed, try to download it from the Support page:
    Digital Camera RAW Compatibility Update 5.03  http://support.apple.com/kb/DL1717
    Sometimes you can recover unfinished downloads by using the menu item "Store > Check for unfinished downloads" in the App Store menu.

  • Digital Camera Raw - 6.02

    Just released
    Supported by Digital Camera RAW Compatibility Update 6.02
    Canon PowerShot G7 X
    Canon PowerShot SX60 HS
    Fujifilm X100T
    Nikon 1 J4
    Olympus PEN Lite E-PL7
    Panasonic LUMIX DMC-GM5
    Sony Alpha ILCE-5100

    Make a backup of your system and try to downgrade the RAW support to version 6.01
    To downgrade the RAW Support to the last version from before the last update try this:
    To reinstall the 'RAW Compatibility Update' it is necessary to uninstall the currently installed raw support. Otherwise the installer will rightfully say, that you already have the latest version installed.
    If your tests are showing that the problem happens also in a different user account, try this:
    The RAW support files are installed in the System Library in the folder "/System/Library/CoreServices" Folder:
    To open this folder, use the Finder's "Go" menu. Click the smiling Finder icon in the Dock to bring the Finder forward.
    Then type the keyboard shortcut ⇧⌘G  (for "Finder > Go > Go to folder")  and copy and paste "/System/Library/CoreServices" into the text field. Click the "Go" button.
    In the Finder window that will open, delete both the files "RawCamera.bundle" and "RawCameraSupport.bundle". You will have to enter your Administrator password. (don't empty the Trash, so you can put the files back, if need be)
    Download the current RAW support update from Apple's Support Site:
    Digital Camera RAW Compatibility 6.01 http://support.apple.com/kb/DL1777?viewlocale=en_US&locale=en_US
    In the Downloads folder you will find the disk image with the installer. Double click it to open and run and the installer.
    Then restart your Mac.

  • Digital Camera RAW update 2.1 (requires 10.5.3) XSi/450D support:

    http://www.apple.com/support/downloads/digitalcamerarawcompatibilityupdate21.htm l
    Digital Camera RAW Compatibility Update 2.1
    About Digital Camera RAW Compatibility Update 2.
    This update extends RAW file compatibility for Aperture 2 and iPhoto ’08 for the following cameras:
    Canon EOS Digital Rebel XSi/Kiss Digital x2/450D
    Epson R-D1
    Leaf AFi 7
    Leaf AFi 6
    Leaf AFi 5
    Pentax K200D
    Pentax K20D

    Firstly, the best method I have found (superior to Adobe Import/Convert/Export) is to install the software from the A300 CD - I know, blasphemy. Anyhow, you can delete all except for the RAW Image Converter, which lets you do raw editing, its decent, and then export into whatever file type and size that is convenient for you, though its not the same as native Raw support, I know.
    Quirks: Not many, its a great camera, I've had mine for about a month and a half now. The AF Assist light drains battery like an electric car, and I can't say that I totally appreciate the inability to invert the focus ring direction. Ergonomics whilst wearing glasses is mediocre at best and your screen will get dirty - you'll have to deal with it. Otherwise, its absolutely an amazing camera, DO NOT RETURN YOURS!!! As you can see, there are a few quirks, but if I were to write down its positives above cameras prices three times as much, the list would take up pages. keep it, its too good to care for the little things like that.

  • Since Digital Camera RAW Compatibility Update 4.03 Aperture no longer supports by 20D CR2 images. Is this a known problem? And when it going to be fixed?

    Has anyone else run into this problem since the update?

    The Raw support for Canaon EOS 20D is built directly into the Mac OS X, since Mac OS X Lion, see:
    OS X Lion: Supported digital camera RAW formats: http://support.apple.com/kb/HT4757
    OS X Mountain Lion: Supported digital camera RAW formats: http://support.apple.com/kb/HT5371
    This is independent of Aperture. What is the problem? Do you get "unsupported image format" error messages?
    Regards
    Léonie

  • Canon EOS 5D Mark II Digital camera - unable to open raw files

    Hi I have downloaded some raw files from my brothers
    Canon EOS 5D Mark  II Digital camera
    and I cannot see them?  Mine are ok from my Canon 40D.
    Juliet

    Try this TechNote for a solution:_
    http://kb2.adobe.com/cps/407/kb407110.html

  • Canon EOS 100D is listed as compatible in Digital Camera RAW Compatibility Update 6.01 but when I connect my camera a message appears telling it's not compatible with the operating system?

    Canon EOS 100D is listed as compatible in Digital Camera RAW Compatibility Update 6.01 and when I have checked for software updates there are none available.  I've downloaded the Canon software, connected to my mac via the cable and followed the instructions in the manual.  Sadly I just get a message saying it's not compatible with the operating system.  I've tried inserting the memory card into the mac to and it doesn't seem to see it.  Can anyone help please?

    Camera RAW ≠ Camera driver, the RAW update is for the .CR2 canon raw image file (in your case) compatibility.
    What happens when you try to import photos using Image Capture or iPhoto?
    Can you take a screenshot of the error message?
    I always prefer and recommend using memory card import over using the camera.

  • Aperture Expert is reporting that Digital Camera RAW 4.0.5 supporting Fuji sensors is out...

    It should be available via Software Update.
    http://www.apertureexpert.com/tips/2013/4/17/digital-camera-raw-update-405-for-a perture-and-iphoto-fujifi.html
    New cameras supported:
    Fujifilm X20
    Fujifilm X100S
    Fujifilm X-E1
    Fujifilm X-Pro1
    I would expect it would also be available for download here:
    http://support.apple.com/downloads/
    But isn't there yet.  I guess there may be numerous fewer threads here related to Fuji now ;-)

    The Mountain Lion raw support article also lists the update already - I had to remember to clear the Browser Cache to see it
    http://support.apple.com/kb/HT5371
    And it was available at the AppStore for download more than an hour ago, but grouped with the pre-release software update, even if the update itself was not marked as pre-release seed.

  • Apple Digital Camera RAW Support 2.2. update

    After todays Apple Security Update 2008-007 the Apple Digital Camera RAW Support 2.2. update finally works correctly and the data can be aquired via card reader.
    Message was edited by: jdonath

    Lucky you jdonath....
    I have still have the problem that have been mentioned in a number of posts in the forum, and what I guess you are refering to. And I have tried the advices I have found in those posts. I must admit that I might not have found them all.
    The CF card on my Nikon D2Xs shows in finder, .nef files are there, but Aperture 2.1.1 don´t recognize my files only the card itself.
    I use a card reader-not transferring files directly from the camera. I have installed the latest security update and camera raw 2.2. I have tried to go back to version 2.1 of the raw converter with no luck. I have repaired permissions, both with Onyx and with the disk tool in OSX.
    Aperture opens when I put the CF card in the reader and it shows in the import option/drives window in Aperture, but the files are somewhere in outer space or at least hidden and unavailable for import.
    So for now my solution is to dump the files to a picture dump folder on my hard-drive and import them from there to one of the libraries I use.
    I have different libraries for work and private files in case someone wondered
    It does not make any difference which library I use the problem is persistent. This feels like unnecessary work and not a very satisfying sollution in my workflow.
    Yeah, yeah i use both belt and suspenders so the files are kept safe on an external drive as well. Manually copied of course... and btw i use a combo of referenced and managed files, but that should not make any difference. I have tried to alter that in the import options, with no apparent result of course.
    Can anyone give me a hint what could (still) be wrong or do I have to be moderately patient and wait till next sunrise (it is late autumn and dark in Norway this time of year) , when Apple sends out version 2.3 and make a prayer that they remember that some photographers are still back in the stone age when comes to cameraequipment... ( I wish someone gave me a D3)
    And just to make the confusion complete... It used to work BEFORE the security update last night...
    Cheers and my 2 cents
    Ø

  • Since Digital Camera RAW Compatibility 3.01, E-30 Support unusable!

    I can't Update Digital Camera RAW Compatibility since 3.0, because Olympus E-30 RAW is since then unusable, I thought Apple might fix that, but they don't seem to pay enough attention to Olympus Cameras, however, everything above 3.0 it's so contrasty, and the full dynamic of the pictures is lost. so completely unusable, when DSLR pictures look worse than some 8 year old Pictures of a Camera Handy. Does Apple don't know about that, do they don't care, or do I don't know about how I can fix that?

    Nothing?

  • Digital Camera RAW Compatibility Update 3.12 and later can not be installed on OSX 10.6.8.

    Hi
    I bought a new Canon EOS 5D mark 3 and noticed that my MacBook Pro with OSX 10.6.8 can not handle the new raw files.
    Searching google shown that I need Digital Camera RAW Compatibility Update 3.12 or later.
    So I tried with 3.12, 3.13 and 3.14, but all failed during installation with error: "Dieses Update unterstützt nur Aperture 3 und iPhoto 9."
    Hmmm
    Checking iPhoto ...
    About IPHOT shows "Iphoto '09 version 8.1.2 (424)"
    So I've updated Iphoto with version 9.2.1 (which I found matching my OSX after stepping down from highest version down ..... Apple is here not really supporting users here .......)
    Unfortunately this is only an update.
    So I need to install first a newer Iphoto version.
    Iphoto 11 I can buy in the app store, but I can not install it on OS/X 10.6.8 .....
    Lost!
    How do I get my raw files of 5Dm3 visible in OSX 10.6.8 ???????
    Any help welcome
    Thx
    Wolfgang

    I maintain up to date my system, yet I have from time to time when I take RAW picture issues in iPhoto not reading them.  Today, looking for another issue I came across this update and I was hopping it would resolve my issues with the RAW photos from my Pentax K-30.
    The error:
    Installer quit unexpectedly.
    Click Reopen to open the app again. Click Report to see more detail information and send to Apple.
    Backtrace not available
    Unknown thread crashed with X86 Thread State (32-bit):
      eax: 0x00000055  ebx: 0x00000000  ecx: 0x00000000  edx: 0x00000000
      edi: 0x00000000  esi: 0x00000000  ebp: 0x00000000  esp: 0x00000000
       ss: 0x0000001f  efl: 0x00010203  eip: 0x8fe01030   cs: 0x00000017
       ds: 0x0000001f   es: 0x0000001f   fs: 0x00000000   gs: 0x00000000
      cr2: 0xfffffffc
    Binary images description not available...
    This laptop cannot be upgraded further without hindering its performance.  Hence, I need to keep the version of iPhoto that I currently have.
    Thank you for your response.

  • Now available: Digital Camera RAW Compatibility 4.0.6

    http://support.apple.com/kb/DL1656
    Digital Camera RAW Compatibility Update 4.06
    This update adds RAW image compatibility for the following cameras to Aperture 3 and iPhoto '11:
              Canon EOS-1D C
              Canon EOS Rebel SL1 / 100D / Kiss X7
              Canon EOS Rebel T5i / 700D / Kiss X7i
              Hasselblad Lunar
              Nikon COOLPIX A
              Nikon D7100
              Nikon 1 J3
              Nikon 1 S1
              Sony Alpha NEX-3N

    Nah.  There will be a new camera announced in the next week and it will again be a crisis that Apple is not professional because they take more than 4 days to support a new camera
    What about a camera released a year ago? Should I get at least a bit upset fo the lack of support? Hope wit will come out soon.
    Raf

Maybe you are looking for

  • APEX Report to balance a column of data over 3 columns

    I have an sql report that outputs a code and description e.g. 1  Ape 2  Boar 3  Cat 4  Dog 5  Elephant 6  Goat 7  Hare 8  Ibis 9  Jackel 10 Kangaroo 11 Lion 12 Mouse 13 Numbat I need the following output where the number of records can change but I a

  • Search and replace, with pattern matching using a table

    I need to inspect a data stream and standardise a set of codes. I need to 1. Match any patterns with a dash character and remove the dash and any following characters, eg BN-S -> BN, BN-SH -> BN, ARG-22 -> ARG, etc. 2. Make a few specific word for wo

  • Update Record Form Wizard Not Working

    This is my first attempt at creating dynamic pages via asp and microsoft access. However I think I've done pretty well for my first go around. Any help would be so greatly appreciated as I've only got 5 hours of sleep in the last 2 days. I'll try to

  • How to connect to RAC with failover enabled?

    I want to use instant client to connect to a RAC database. How can I accomplish that without tnsnames.ora file?

  • How to mass moving iviews from one folder hierachy to another within PCD?

    Hi,SDN fellows. I found that it is really not user-friendly to move iviews from one folder to another within PCD> I tried to use Multiple Property Replacement to move some iviews in one folder to different folder hierachy in PCD, but I don't really k