HT203164 register settings used by I Tunes drivers for importing & burning CD or DVD are missing. Please reinstall I Tunes. I re installed several time but got same results. Win 7

Error message ...Register setting used by I Tunes drivers for importing & burning CD or DVD are missing. Please re install I Tunes.
I re installed twice and error message is still there. Try to burn CD and message says: Disc recording not found.
WIN 7 I Tunes 11.0.1.2
Spoke to Dell support for 2 hours. Reinstalled updated drivers for CD DVD drive but same results.
Thanks
HW

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

Similar Messages

TS1368 I keep getting this error message and can't open the iTunes store. I've reinstalled iT a half dozen times with no results. "Registry settings used by the iT drivers for importing & burning CDs & DVDs are missing" reinstall iTunes

I can't open the iTunes store and keep getting this error message. "Registry settings used by the iT drivers for importing & burning CDs & DVDs are missing. Reinstall iTunes." I've reinstalled iT a half dozen times with no results.

You might have two different things going on at once here.
Starting with the registry settings message.
I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

I received the following message when iTunes launches: "The registry settings used by the iTunes drivers for importing and burning CD's or DVD's are missing. This can happen as a result of installing other CD burning softwarre. Please reinstall iTunes"

Everytime I connect my iPod Touch (4th Gen) to my laptop, running Win 7 (64 bit) I get the message "The registry settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes" I have reinstalled iTunes several times and it has not fixed the issue. I am running ver 10.2.2.12 of iTunes. I HAVE NOT installed any other burning software to my laptop either. I haven't tried uninstalling iTunes and then re-installing it yet. Would that perhaps fix the problem? I've read that many users have had issues with the new version of the software and I was wondering if that might be causing my issue. I'd like to point out that iTunes seems to work after getting rid of the message, but I haven't tried to burn any CDs or put music from a CD to my laptop. Any ideas on how to get rid of the annoying message?
I also am having trouble hooking up with our other computers using Homegroup. I noticed quite a lot of people are having the same issue and hopefully they come up with a fix for that soon.
Thanks in advance.

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes
If you're still getting the error message (especially when you plug in the Touch), I'd check for a device filter confusion on the PC. (They can affect the connection of USB devices to a PC, as well as burning and importing CDs.) For that one, see:
iTunes for Windows: Troubleshooting CD issues caused by device filters

When starting iTunes I continually get an error message " The registry Settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes."

When starting iTunes I continually get an error message " The registry Settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes." I have unistalled and reinstalled iTunes several times and have cleaned up the registry using a 3rd party Windows utility. Any tips on removing this error message for good?

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

When i click on itunes to open, message says: the registry settings used by the itune drivers for importing and burning cds and dvds are missing. this can result from installing other cd burning software. Reinstall itunes. I'm inexperienced. Please help

When I click on itunes, I get a message that says, "the registry settings used by the itune drivers for importing and burning cds and dvds are missing. this can result from installing other cd burning software. Reinstall itunes." I am a really inexperienced computer user. My computer is a windows 7. Would someone please walk me through this or tell me where to find information on how to do this. Thanking in advance, Laurie

Check out this Apple article -> iTunes for Windows: "Registry settings" warning when opening iTunes
The article will walk you through reinstalling iTunes and then checking for or creating device filters. Did it help? Did you run into any problems?

Error msg at launch says "Registry settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. ... Please reinstall iTunes."

Each time I launch iTunes (latest version) on Windows 7 (w/ latest system updates) I receive the following error msg:
"Warning! The registry settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes."
When I click on "OK" iTunes completes the launch process and the application functions properly. This error msg appears without fail every time I launch the app.
I have reinstalled iTunes four times and continue to receive this message. iTunes is set in the system Control Panel as the default program for all functions that iTunes uses. I never burn CDs or DVDs and have never attempted to do so on this machine. I have had iTunes on this computer since I bought it last November and never had a problem with it until 2 months ago when this message began popping up. I did not notice any action I took that caused this, in terms of creating conflicts.
I hope someone can assist me in finding a way to stop this annoying error! Thanks!
David

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

The registry settings used by the iTunes drivers for importing and burning.

Please Help! Problem Burning CD's with iTunes 8!?
I downloaded iTunes 8 a few days ago. I think something went wrong, and it was taking a long time, so I canceled it, but it was nearly finished. When I opened iTunes, everything was fine, and all the new stuff (Genius and whatever else) was there, but this message came up:
Warning! The registry settings used by the iTunes drivers for importing and burning CD's and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes.
So, I went to the Apple website and clicked "download iTunes 8", and a box came up that asked me if I wanted to repair iTunes, or do something else. Obviously it knew I had already downloaded it, so I clicked "Repair". It ran, and it said everything worked. Then I clicked on iTunes, hoping the burning would work. The same message came up as before. When I tried to burn a CD, a similar message came up. WHAT DO I DO? Thank you.

Here is the solution!
Go to this website: http://www.gearsoftware.com/support/drivers.php
Download the proper driver and install.
I am running Vista. I had two, actually three problems. First was that for some reason, my CD/DVD drive disappeared. I found that the solution to this was to delete the LowerFilters and UpperFilters strings in the registry. That worked and I got my CD drive back. However, I then got that pesky error message from iTunes. That was the second problem. The third problem was that I could no longer burn CD's of my playlists from iTunes and it said that the "disc burner or software was missing." Going online, I discovered that I was not the only one experiencing these three problems.
I happened to find the solution about the Gear drivers at http://www.pcdoctor-guide.com/wordpress/?p=2726. Installing the x32_x64 driver, of course, worked for me since I'm running a PC laptop. This took care of all three problems for me.
If you notice, the other post about editing the registry makes reference to the Gear ASPI driver. Gear is the one (as you would read on the first link) that provides the drivers for software to burn CD's.

The registry settings used by the iTunes drivers for importing and burning CDs and DVDs are missing

Error on Itunes start-up. Must click OK before Itunes will start.
The registry settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes.
I have reinstalled iTunes using their complete uninstall instructions.
iTunes does seem to work after OK is clicked, I'm just tired of having to hit OK.
Other thoughts... This started after the iTunes update required to go to IOS 6 for my devices. I'm able to sync my devices. It is possible that ZoneAlarm (my Antivirus and Firewall) got in the way at install. It flagged something and I denied it. I was doing multiple things at the time and the flag did not have any indication about iTunes. I have tried shutting down ZoneAlarm for the install and that has not helped either.
Will try another full uninstall that includes uninstalling ZoneAlarm...

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

What can I do to correct this error: The registry settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. The drive works fine when I burn a CD using Media Player.

What can I do to correct this error: The registry settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes. I have reinstalled several times but it hasn't changed this error message. Why am I able to burn a CD using Media Player but not iTunes? I am using Windows XP and I have burned cds from iTunes in the past.

1: Follow this support doc to completly remove iTunes (your files remain)
http://support.apple.com/kb/ht1925
2: Download, install and run the Registry cleaner portion of the free Ccleaner
http://www.filehippo.com/download_ccleaner
3: Reinstall iTunes

I received the message 'The registry settings used by the iTunes drivers for importing and burning CD's and DVD's are missing. Please reinstall iTunes.' I have re-installed iTunes and still receive this message. Any suggestions?

I received the message 'The registry settings used by the iTunes drivers for importing and burning CD's and DVD's are missing. This can happen as a result on installing other CD burning software. Please reinstall iTunes.' I have re-installed iTunes and still receive this message. Any suggestions?

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

I get the following message when opening itunes: "the registry settings used by the itunes drivers for importing and burning cd's and dvd's are missing" how do I repair? downloading latest virsion of itunes doesn't work

I get the following message when opening itunes: "the registry settings used by the itunes drivers for importing and burning cd's and dvd's are missing. Downloading the latest version does no fix the problem

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

The Registry Settings Used by the itunes drivers for importing and Burning CD's are missing

I get the following error message in the latest version of iTunes on start-up
The Registry Settings used by the iTunes drivers for importing and Burning CD's and DVD's are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes.
I tried troubleshooting from a guide on another apple support page and it worked but stopped the DVD Drive working and I have tried reinstalling iTunes but that failed and I don't know what to do and how to get rid of this error on start-up of iTunes

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

HT203242 I get this error when launching itunes "the registry settings used by the itunes drivers for importing and burning CDs and DVDs are missing." I ahve reinstalled iTunes multiple times but the issue remains.....any suggestions?

I get this error when launching itunes "the registry settings used by the itunes drivers for importing and burning CDs and DVDs are missing." I ahve reinstalled iTunes multiple times but the issue remains.....any suggestions?

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

HT201413 The registry settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. Do I have to uninstall before I re-install iTunes?

Note I am receiving when opening up iTunes: The registry settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes.
Question: Do I have to uninstall iTunes and then reinstall? I am a little hesitant to do this!
Noelyn

Hi for the message error "Warning! The registry settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes."
Here are the resolutions I found and it fix the problem for me.
Resolution
iTunes installs a device filter which helps it work with your optical drive. If this device filter is missing, you will see the message mentioned above. To resolve this issue, reinstall iTunes to put the device filter back in place. To reinstall iTunes, follow the steps in the article below appropriate to your OS:
HERE http://support.apple.com/kb/HT1923
If you still get the pop up error "Warning! The registry settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes."
Do this
http://support.apple.com/kb/TS3299
Good luck!
B

Keep getting error message "The registry settings used by the iTunes drivers for importing and burning CDs ....please reinstall iTunes." I have done this several times but it doesn't help.

Keep getting error message "The registry settings used by the iTunes drivers for importing and burning CDs ....please reinstall iTunes." I have done this several times but it doesn't help.

Refer to this article:
iTunes for Windows: "Registry settings" warning when opening iTunes
http://support.apple.com/kb/TS3299

HT203164 register settings used by I Tunes drivers for importing & burning CD or DVD are missing. Please reinstall I Tunes. I re installed several time but got same results. Win 7

Similar Messages

Maybe you are looking for