HT203167 Can't find my ringtone after having my iPhone restored to factory settings

I had a problem switching my Fone bk on after a software update and had to take my Fone to the apple shop to fix! They had to restore factory settings! I have managed to get my iTunes but cannot find my ringtone I purchased! Any help would b gr8!

If you have synced to iTunes before, check under TONES library in itunes and see if those ringtones are there.  If so, sync them over.
If not, you cannot re-download for free as Ringtones are not treated with fair use rules like music.

Similar Messages

  • How can I tell if my macbook pro has been restored to factory settings?

    I just bought I brand new macbook pro (15,4 inch) from an official apple store... but I'm thinking that it may be used (it was a bit dirty when I opened it, but it has no scratches).
    I tried with coconut battery, but it went ok, the battery is new. However they might have changed it.
    Is there a way to know if the mac was restored to factory settings?
    ... if not, is there any other way to know if is a used laptop?
    Thanks,

    cycle count says 1... wich correspond to the initial battery discharge I just did. That's why I think they may have changed the battery.
    Serial number is C02FHFG0DF8V... how can you tell if this correspond to a refurbished unit?
    It has all the "official" envelops of a brand new mac... the thing is that I found small dust specks all over the interior of the box and in the accesories (not on the notebook itself).
    According to coconut "Age of your Mac" is 11 weeks.
    That's why I thought the only way I could knew for sure if they used it before (maybe for showcasing at the store) was finding out if it was restored to factory settings. (Also I bought it in an official apple store).

  • Logic Can't Find Audio Files After a Time Machine Restore

    My hard drive crashed so I was forced to restore by using Time Machine. Now when I open some of my old projects they cannot find certain Audio FIles. These Audio Files seem to be files not ordinarily found in the Audio Files Folder inside the project folder, these files have the same names as the "Undo Data" Folders. These files are not physically there when I search the older backups in Time Machine. Im assuming that these are Virtual files created by Logic within the Undo Data. How do I get them to become recognized again???
    Please Help!

    "audiofile.caf" means an audio file (surprise!) in Core Audio Format. IOW, a generic term for anything you might like to deal with in Logic. The implication is that it thinks you want to do something with a file (it understands you are attempting a drag-&-drop operation), but it doesn't know anything about the file — not even its name.
    There are other ways to get audio files into your arrangement, so you should try those ( e.g.: +Audio > Import Audio File+ ). Drag-&-drop is just one method; the others are equally good, & if they work, we can take it from there. Meanwhile — you are sure you are dragging the actual file, & not an alias? Or some other 'not-the-actual-file' type thing?

  • How can I recover pictures from iphone 4 after it has been restored to factory settings

    My little cousin was playing with my iphone and restored it to factory settings. Is there a way to retrive my pictures on the phone? 

    My pictures have been backed, but not for the last 3 months. Does this mean the ones that are not backed are lost? .... right now it is asking if I want "restore to new iphone" or "back up from itunes"  ... which would you recomend I choose.. and is there any other way to get back what was lost?
    Thanks for your reply.

  • Can't find imported ringtones on phone

    I give up.  I don't know what else to try.  HELP
    I made a couple of ringtones with mymxr (converted mp3 to m4r).  I got the ringtones to show up in the "tones" section of iTunes (although at one point one of them appeared in the "movies" section).  ITunes seems to sync ok but I can't find these ringtones listed with the tones that came with the phone (iPhone 5s).  I'm a newbie at all of this apple stuff and while I've read of others trying to do something similar nothing I've tried over the last three days has worked.
    I believe it's possible to convert some of my favorite tones from my Blackberry to the iPhone but I'm not having any luck accomplishing this.  Any insight as to how to make this happen would be gratefully received.

    JIMNPHX wrote:
    Hi,
    I have a Mac so I cant right click
    Use control+click to right click. I am on a mac too.
    JIMNPHX wrote:
    It IS in my itunes as a ringtone but will not sync to phone. I cannot drag and drop either but can with songs.
    When I click on the phone device in itunes and get the tabs on the top, I go to ringtones. If I check the sync ringtones box a window opens stating that if I do sync ringtones all of my music and videos on the phone will be removed. Why is this? I did it with my wife's phone because she only had a couple songs on hers but I do not want to wipe all of my songs off. Is this the only way? I don't even need the ringtone on my phone but I am trying to figure out what to do so i can do it on my wife's phone.
    Highlight the file in iTunes and open "get info" by cmd+click or right click>>get info.
    Make sure that the extension of the file is .m4r
    Since you are not able to drag it out of iTunes on your desktop, it tells me that the extension could be something else other than what it should be i.e. .m4r. Also, hence, when you try to add it to your iPhone the file is being treated as a music file thereby trying to replace what you have in your music section of your iPhone.
    If the file extension is not .m4r, this is what you need to do -
    1. Locate the file on your macintosh hard drive for this -
    2. Click your finder>>music>>iTunes>>iTunes music and then look for a folder called Unknown.
    Note - If your iTunes library is not "clean" with random songs without artists, albums, etc. you might have more than one folders by name "Unknown" or some variant of it. So look around and locate the file on the hard drive.
    3. Drag it out on your desktop
    4. Right click and change the extension to .m4r
    5. Save and double click so that it gets imported back into iTunes and starts playing too on your mac
    6. You will find it under Ringtones. Sync in back on your iPhone.
    Hopefully it will go well for you this time around.

  • HT1725 can't find a ringtone I purchased on my iphone?

    I purchased a ringtone on my phone. I had to update some info.  Apple sent me a message confirming I am the correct person and now I can't find my ringtone.

    Playlists only exist as part of the larger iTunes library listing so if you are not seeing it there it doesn't exist anywhere else.  I know with my older version of iTunes it is very easy to accidentally delete a playlist.  With newer versions it may be possible to recover it with the undo feature in the menu but this likely will only work immediately after the deletion.

  • Can't find home drive after reinstallation of O.S.X

    Dear friends,
    I have one ibook G4 and a Macbook Pro. Two days ago, the ibook G4 failed to start up, I tried in safe mode then pass through. Then I run Onyx-automation followed by restart, after that neither my desktop nor the sidebar of the finder window show the home drive icons,( I partitioned the internal hard disk into two drives). But when I run Disk utility and found both are there correctly, including the files and capacity, usage etc. it tested both drives "appears OK". Yesterday, I tried to reinstall O.S.X Tiger 10.4 without removing previous system via a firewire to my Macbook Pro which installed with Leopard( the disc drive of my ibookG4 corrupted last year).
    finally, the hard drives are still invisible, I did tick the display options for hard disks from the preference panel of Finder. To the worse, the same problem happened to my Macbook Pro after I restarted it.
    It seems a simply software issue, physically the hard disks are ok through the disk verify and permission verify.
    Headache! Please advise ASAP.
    thank you,
    macbook pro Mac OS X (10.5.4)
    V.K.
    Posts: 20,162
    From: Toronto
    Registered: Oct 24, 2005
    Re: can't find home drive after reinstallation of O.S.X
    Posted: Nov 2, 2009 6:58 PM in response to: cjunxing
    Reply Email
    what happens when you enter commandshiftc in finder? that should show all the drives. if it doesn't, maybe the drive has acquired the hidden flag. run the following command in terminal
    sudo chflags 0 /
    you'll have to enter your admin password which you won't see as you type it. that's normal. see if the drive shows up.
    Mac Pro 3.2 GHz Mac OS X (10.6.1) Mac Pro 2.66GHz, powerbook G4 1.5GHz
    cjunxing
    Posts: 9
    From: china
    Registered: Jul 8, 2008
    Re: can't find home drive after reinstallation of O.S.X
    Posted: Nov 2, 2009 7:11 PM in response to: V.K.
    Reply Email
    dear V.K.
    When I enter commandshiftc in finder, it only shows up "network", then I followed to input sudo chflags 0 / in terminal and password, but the drives still not show up.
    is there any other options to try out?
    many many thanks
    Junxing
    macbook pro Mac OS X (10.5.4)
    V.K.
    Posts: 20,162
    From: Toronto
    Registered: Oct 24, 2005
    Re: can't find home drive after reinstallation of O.S.X
    Posted: Nov 2, 2009 8:01 PM in response to: cjunxing
    Reply Email
    run the following command in terminal and post the results. this will list permissions flags and acls on the startup drive.
    ls -ladeO /
    Mac Pro 3.2 GHz Mac OS X (10.6.1) Mac Pro 2.66GHz, powerbook G4 1.5GHz
    cjunxing
    Posts: 9
    From: china
    Registered: Jul 8, 2008
    Re: can't find home drive after reinstallation of O.S.X
    Posted: Nov 2, 2009 8:03 PM in response to: V.K.
    Reply Email
    I run the command as follows.
    Last login: Tue Nov 3 11:04:49 on ttys000
    cjunxing:~ junxingchen$ ls -ladeO /
    drwxrwxr-t 38 root admin - 1360 Aug 11 10:25 /
    cjunxing:~ junxingchen$
    pls advise
    macbook pro Mac OS X (10.5.4)
    V.K.
    Posts: 20,162
    From: Toronto
    Registered: Oct 24, 2005
    Re: can't find home drive after reinstallation of O.S.X
    Posted: Nov 2, 2009 8:34 PM in response to: cjunxing
    Reply Email
    these permissions look fine. sorry, i don't know what the problem is or why the drive would not show in finder. does it happen on all accounts? make a new one and check from there.
    Mac Pro 3.2 GHz Mac OS X (10.6.1) Mac Pro 2.66GHz, powerbook G4 1.5GHz
    cjunxing
    Posts: 9
    From: china
    Registered: Jul 8, 2008
    Re: can't find home drive after reinstallation of O.S.X
    Posted: Nov 3, 2009 1:11 AM in response to: V.K.
    Reply Email
    hi, V.K.
    after running the two commands, suddenly, The Macintosh HD icon showed up at both desktop and sidebar in finder, but the other drive (I partition into two parts) still not showing. Then I open Onyx and tick the "unhidden those hidden files", I found that drive. So I conclude it was hidden by sth. But I don't know how to unhidden it, the icon always in grey.
    Can you please instruct again.
    thank you.
    Junxing
    macbook pro Mac OS X (10.5.4)
    V.K.
    Posts: 20,162
    From: Toronto
    Registered: Oct 24, 2005
    Re: can't find home drive after reinstallation of O.S.X
    Posted: Nov 3, 2009 6:41 AM in response to: cjunxing
    Reply Email
    aha, so it was a hidden flag after all. then run
    sudo chflags 0 /volumes/*
    you may need to restart after that to make the second drive show up.
    Mac Pro 3.2 GHz Mac OS X (10.6.1) Mac Pro 2.66GHz, powerbook G4 1.5GHz
    cjunxing
    Posts: 9
    From: china
    Registered: Jul 8, 2008
    Re: can't find home drive after reinstallation of O.S.X
    Posted: Nov 3, 2009 5:33 PM in response to: V.K.
    Reply Email
    Dear V.K,
    I run the command at my Macbook Pro, my second drive show up. So exceited! However, when I tried with my ibook G4, neither drives come out, is there any difference in the commands between Tiger and leopard. just now, I check the hidden files with Onyx, both drives are there.
    Pls guide me.
    thanks
    macbook pro Mac OS X (10.5.4)
    V.K.
    Posts: 20,162
    From: Toronto
    Registered: Oct 24, 2005
    Re: can't find home drive after reinstallation of O.S.X
    Posted: Nov 3, 2009 6:46 PM in response to: cjunxing
    Reply Email
    sorry, I haven't dealt with Tiger in such a long time I don't remember if it respects chflags. ask on Tiger forums.
    Mac Pro 3.2 GHz Mac OS X (10.6.1) Mac Pro 2.66GHz, powerbook G4 1.5GHz

    I don't have a source attribute for this (maybe I wrote it myself!):
    There are visibility toggling instructions at [this web site|http://www.pinkmutant.com/articles/invisible.html] using Terminal or Applescript.
    If you don't like Applescript or Terminal there is an application called [JuhOS X|http://www.saunalahti.fi/~juhruo/juhosx> that lets you toggle visibility on individual items. It does not have the most intuitive interface but your drive should appear on the first page. Check it really is invisible, then click on the drive and toggle visibility. Effects will not take place until you restart your finder, so the easiest thing to do then will be to restart your computer.

  • I can't find the photos after I have saved them from a text message, It says attachment saved, where do they go and how do I get there? Thanks

    I can't find the photos after I have saved them from a text message, It says attachment saved, where do they go and how do I get there? Thanks

    Here to help shed some additional light on this case, jdondr. I also own a Maxx. With your phone, if you access the Gallery, there should be a folder named: Messaging.  If you look at the upper left hand corner, you should see a drop down box. Is it currently set to Albums?
    NicandroN_VZW
    Follow us on Twitter @VZWSupport
    If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

  • Where can I find a ringtone I paid for but it is not appearing in my itunes account

    where can I find I ringtone I purchased but it is not appearing in my ringtones on my phone?

    Select Ringtones under Library left side of the iTunes window. If you see the Ringtone there, connect the iPhone to your computer,
    select the iPhone under Devices on the left then select the Ringtones tab then click Sync.

  • I can't find me dvd after windows7 instaling on hp pavilion dv2700.i can't run any dvd or cd.

    I can't find the dvd after windows 7 installing,onhp pavilion dv2700. can't run any dvd.

    Dear Customer,
    Welcome to HP Support Forum and we are glad to assist you.
    It looks like you are not able to Boot into the Operating System on your Notebook.
    We will surely assist you with this.
    Originally the Notebook will have the Recovery Partition and that would give you an option to create a set of Recovery Disk. If you have not created those Recovery Disks when the Notebook was in working condition we cannot do that right now
    As of now if you need to recover your Notebook with the new Operating System you can check if the Recovery Partition
    is in a working condition or not, If yes you can easily recover/restore your Notebook
    If Recovery Partition is corrupted
    You need to call HP Technical Support and request for a set of Recovery Disks , So you can recover/restore your Notebook at the earliest
    OR
    You need call up Microsoft and purchase an Operating System with the License Key, So you can recover/restore your Notebook at the earliest
    I strongly recommend you to Contact HP Technical Support over the Phone for further assistance without any delay
    Hope this helps, for any further queries reply to the post and feel free to join us again
     **Click the KUDOS star on left to say Thanks**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
    Thank You,
    K N R K
    Although I am an HP employee, I am speaking for myself and not for HP

  • Where can i find the ringtone folder in the newest itunes

    where can i find the ringtone folder in the newest itunes

    Go to Edit > Preferences.. > check off 'Tones'. It should appear in your iTunes like the previous version.

  • Can't find my notes after updating to OSX10.9

    Can't find my Notes after updating to OSX10.9.
    Notes appears blank when open it. Help says they should have transferred from Mail, but they haven't.
    Any tips on how to get them back?

    make sure you have itunes 11.1 installed

  • Time Machine can't find external drive after installing Lion

    Time Machine can't find external drive after installing Lion. I have a Laice 1 terabyte external drive that worked fine with Snow Leopard and now no show ... tried connecting it to front port and Mac Pro can't see it. Also lost Office,Quicken, and Final Cut Pro  says: " You can't open application because Power PC apps are no longer supported" this is Not a good surprise!

    Does the drive work when just directly connected? If so, have you prepped the drive?
    Extended Hard Drive Preparation
    1. Open Disk Utility in your Utilities folder. If you need to reformat your startup volume, then you must boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger or Leopard.)
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Click on the Options button, set the partition scheme to GUID (only required for Intel Macs) then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.

  • I baught a ringtone a few months back and I just now got a iPhone again but I can't find that ringtone and its not on iTunes any more either how can I get it back

    I baught a ringtone a few months back and I just now got a iPhone again but I can't find that ringtone and its not on iTunes any more either how can I get it back

    Graceruiz515 wrote:
    Really 
    Really...

  • HT3680 where can i find this program after reading the whole story?

    where can i find this program after reading the whole story?

    could this knowledge base article be what your looking for?:
    HT3680

Maybe you are looking for

  • YouTube App : Cannot Connect to YouTube

    I have had this problem for a while and cannot resolve.  There appears to be a fair few people with this issue and no resolution. A few facts: My ipad is not jailbroken or interfered with in any way, I sync with a Windows PC NOT a Mac, ISP and router

  • Project Billing - Concession amounts are available for billing in following invoices

    Hi All, Distribution rule : Event/Event 1. Generated invoice for 10% of rev budget. $100. Approved , Released ,Interfaced to AR, Tied back to Projects 2. Applied a concession of $15. Released ,Interfaced to AR, Tied back to Projects 3. Generated anot

  • User id type for connecting Universe with SAP BI

    Hi All, I am working on SAP BO XI 3.1 SP3 and I am successfully able to connect Bex query to the Universe. While creating a connection within Universe, we have to provide SAP BI logon parameters like Application IP, user id, password, etc while conne

  • I can't remember my security answers and there isn't a link to send them to my rescue email

    I can't remember my security answers and I need them to make my first in-app purchase. The link to send them to my rescue email did not pop up and now I am locked out of my security questions screen for eight hours. What do I do?

  • R11 recovery

    Hi; I need help :) The senerio is: I have 11.5.10.2 instance on linux i have cold backup and rman backup ok? i install new linux and copy cold backup-rman backup to this new server. I close 11.5.10.2 and server I give same IP and hostname to my new l