HT203167 I am missing my audiobooks after upgrading ipod to new os

I am missing my audiobooks after upgrading ipod to new os.

Even though Apple iTunes has reached agreements with the Music and Film industries, they cannot offer Audiobooks over the Cloud.
So, when you buy an Audiobook, you must download it to your main machine and hold it there. If you upgrade your hardware (iPod, iPhone, or iPad) or IOS software, the audiobook on that device disappears and you will have to download it again from your main machine. This means wiring it up "old school" and not wifi.
As a consequence, it is advisable never to buy an audiobook from a portable device as it will not sync and will not be available for download elsewhere. I did this and I had to ask Apple to "push" a new file so that I could download it on my main machine.
Hope this helps.

Similar Messages

  • Missing application icons after upgrade to 2.0

    Missing application icons after upgrading to 2.0. Tetris, Clock and Voice recording icons are missing. Looks like the applications are still installed but they are not showing up with all the other icons.
    There is absolutely nothing in the help about restoring icons.
    Any ideas as to how I can get these missing icons to display again?
    Thanks.

    Great! Where was it?
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • InfoObject is missing in report after upgrade

    Hi,
    My InfoObject Statistical ID is missing in Report after Upgrading from 3.5 to 7.0.
    I did comparison of report before and after upgrade and found this issue.
    the data content is the same but only this infoObject cannot be seen in the report
    how do I correct this issue.
    thanks
    Edited by: Bhat Vaidya on Aug 6, 2008 12:24 PM

    This not fixed. SAP couldn't explain why

  • I have used Firefox on my computer for several years. Today, after upgrading to the new version, I was not able to open Firefox. I have tried several times uninstalling and re-downloading Firefox. It still will not open! What is wrong?

    I have used Firefox on my computer for several years. Today, after upgrading to the new version, I was not able to open Firefox. I have tried several times uninstalling and re-downloading Firefox. It still will not open! Is the new version not compatible with Windows Vista?

    I hope that link points to mozilla.com or mozilla.org
    You will have to close firefox.exe with the Windows Task Manager from the "Processes" tab of the WTM since you don't have a widow to close.
    The best way to close Firefox is through File > Exit, for those who stuck with the "Firefox" button click on the Firefox button then Exit. It is not perfect but it is a lot better than just closing the window with the "X" in the upper right corner

  • My built in camera is not working after upgrading to a new Skype version

    my built in camera is not working after upgrading to a new Skype version

    See this thread:
    https://discussions.apple.com/thread/5306216?tstart=0
    FIX: 
    1. You need Time Machine
    2. Go to folder /Library/CoreMediaIO/Plug-Ins/DAL/
    3. Copy AppleCamera.plugin to good place (usb memory stick is the best place).
    4. Go to Time machine in date that skype work fine.
    5. Change AppleCamera.plugin with file from Time Machine
    6. Restart system, Now skype need to work with camera.
    If that doesnt pass,
    Suggest looking here, much success has been found:
    http://community.skype.com/t5/Mac/OS-X-10-8-5-broke-Video-on-MacBook-Air/td-p/18 91729/page/4

  • Do i need to reinstall programs and applications like FCP after upgrading to the new Lion OS?

    Do i need to reinstall programs and applications like FCP after upgrading to the new Lion OS?

    I've installed Lion over Snow Leopard and all my non Apple software is still here - you may want to check if your software will work with Lion and I would definately recommend having a bootable backup in case anything goes wrong
    Regards,
    Colin R.

  • Problem with update MUSE CC 2014.2 (october 6). after upgrading to the new version of Muse crashes very often (out without notice).

    Problem with update MUSE CC 2014.2 (october 6). after upgrading to the new version of Muse crashes very often (out without notice).

    HELP! i can't get ANYTHING done in the new muse - keeps closing.  once it crashes - i can't get the file back open!
    i've lost all my work!
    from my desktop - when it stared happening was with the updated version:
    Logging in build 2014.2.1.10 started at: Mon Nov 03 13:36:38 2014
    ========================================
    [00:00:42.416] Opening file '\\D-LAPTOP\_websites\dsbees muse\dsbees.muse' with status:success size:9797632 mod Date:Tue Sep 23 15:51:42 GMT-0500 2014 highestUID: 3548
    [00:01:03.898] Preparing to Save As over "\\D-LAPTOP\_websites\dsbeesTWO\dsbeesTWO.muse" exists: true
    [00:01:17.516] SaveAs complete for file '\\D-LAPTOP\_websites\dsbeesTWO\dsbeesTWO.muse' file size:9830400 mod Date:Mon Nov 3 13:37:51 GMT-0600 2014 highest UID:3551
    Build 232: Mon Nov 3 19:41:03 2014 UTC: Error: CSI: OOBE: Serial Number: Error Code: O-10 Error Message: Unable to retrieve the serial number (Note: this may not be an error)
    Build 232: Mon Nov 3 19:41:03 2014 UTC: Error: CSI: OOBE: Serial Number: Error Code: O-10 Error Message: Unable to retrieve the serial number (Note: this may not be an error)
    Build 232: Mon Nov 3 19:41:07 2014 UTC: Error: CSI: OOBE: Serial Number: Error Code: O-10 Error Message: Unable to retrieve the serial number (Note: this may not be an error)
    Build 232: Mon Nov 3 19:41:21 2014 UTC: Error: CSI: IMS: Connect: Error Code: I-200 Error Message: No Account
    Build 232: Mon Nov 3 19:41:21 2014 UTC: Unknown IMS error 'SHARED_NOACCT_ERROR' has occurred when retrieving IMS token.
    Build 232: Mon Nov 3 19:41:57 2014 UTC: Opening file '\\D-LAPTOP\_websites\dsbees muse\dsbees.muse' with status:This Adobe Muse site file requires a newer version of Adobe Muse. Please update to the latest version. size:9797632 mod Date:Tue Sep 23 15:51:42 GMT-0500 2014
    Build 232: Mon Nov 3 19:41:57 2014 UTC: This Adobe Muse site file requires a newer version of Adobe Muse. Please update to the latest version.
    Logging in build 2014.2.1.10 started at: Mon Nov 03 13:43:17 2014
    ========================================
    [00:00:21.481] Opening file '\\D-LAPTOP\_websites\dsbeesTWO\dsbeesTWO.muse' with status:success size:9830400 mod Date:Mon Nov 3 13:37:51 GMT-0600 2014 highestUID: 3551
    [00:00:30.373] AssertInDebug: Unable to run recovery. User file remains locked after 5 second pause.-assertInDebugOnly+DataBase/recover+MuseSite$/recover+MethodInfo-2886+DataBase$/run Recovery+apply+UIComponent/callLaterDispatcher2+UIComponent/callLaterDispatcher+end stack
    [00:00:30.404] Failed to recover file:\\D-LAPTOP\_websites\dsbeesTWO\dsbeesTWO.muse
    [00:00:30.420] Calling openConnection for file that doesn't exist? C:\Users\Owner\AppData\Roaming\com.adobe.AdobeMuseCC.2014.2\Local Store\Recovery\JXRoDn335LE0UosOdoStnQ Parent folder exists.
    [00:00:34.429] open of SQL connection failed for C:\Users\Owner\AppData\Roaming\com.adobe.AdobeMuseCC.2014.2\Local Store\Recovery\JXRoDn335LE0UosOdoStnQ
    [00:00:34.429] Failed to open mini-save connection B "C:\Users\Owner\AppData\Roaming\com.adobe.AdobeMuseCC.2014.2\Local Store\Recovery\JXRoDn335LE0UosOdoStnQ" Doesn't exist. Folder exists. error:SQLError: 'Error #3125: Unable to open the database file.', details:'Connection closed.', operation:'open', detailID:'1001'
    [00:00:34.429] EXCEPTION:[SQLC/internalOpen] SQLError: 'Error #3125: Unable to open the database file.', details:'Connection closed.', operation:'open', detailID:'1001'-SQLConnection/internalOpen+SQLConnection/open+DataBaseConnectionWrapper/o penConnection+MethodInfo-28954+EventDispatcher/dispatchEventFunction+EventDispatcher/dispa tchEvent+MethodInfo-28938+end stack
    [00:00:34.445] AlertAndExit because of: [SQLC/internalOpen] SQLError: 'Error #3125: Unable to open the database file.', details:'Connection closed.', operation:'open', detailID:'1001'

  • After upgrading to a new hard drive, I can't drag songs to my ipod

    I can only play them on my computer. I get an error message "itunes could not copy...because an unknown error occurred (-50)
    Any clue what to do?
    Just to complicate matters further, I'm going to move all my data back to the first hard drive next week (long story)

    After upgrading to a new hard drive
    How did you get everything onto the new hard drive?
    I'm going to move all my data back to the first hard drive
    So you deleted it from the original hard drive?
    How do you plan to get it back to the original?

  • After upgrading to the new iOS7, I can't send out sms, I can receive sms, can make and receive call. I have already contacted my network provider, we changed sim card, I have tried to put my sim on other phone, and it's perfectly working. Help me pls

    After upgrading to the new iOS7, I can't send out sms, I can receive sms, can make and receive call. I have already contacted my network provider, we changed sim card, I have tried to put my sim on other phone, and it's perfectly working. Help me pls.

    To be honest not being able to send or recieve messages and data is a carrier issue, not a phone issue since u said that your calls are working, if i were you my first course of action would be to get a new sim card from virgin mobile, or to restore the device as new one more time, if you restore the device as new AND get a new sim card from your carrier and those features still dont work, i would take the device to an apple store

  • Why after upgrading to the new os do some songs in the Ipod library have a dashed circle next to them.

    After upgrading to the new os some songs in my library will not sync to my Ipod. I can see them on my computer in the Ipod library with a dashed circle next to them.  How do I get them to play on my Ipod.  They are songs from store bought CD's in my Itunes library that will play on my computer in Itunes.  They do not appear on my Ipod.  I can see them when the Ipod is connected to the computer in the Ipod library.  I reset the Ipod by holding the home & power button, I went into general settings and reset the device.  I synced again but still no songs.

    I have the same problem even from iTunes bought music it appears with dashed grey circle beside the ones that I have recently added to my iPod by downloading them from the iPod itself. I honestly think it has to do with the 7.0.3 update that they have recently released. It may have solved other problems but it has created more problems along the way.
    Hopefully there will be a solution soon, if anyone has news or solutions please post thankyou
    At least now I know I'm not the only one with the same kinda problem

  • After upgrading Ipod touch to latest OS 6.0.1, sound volume of songs is reduced by 30%-40%. Please advise

    Hi All,
    After upgrading Ipod touch to latest OS 6.0.1, sound volume of songs is reduced by 30%-40%. Please advise

    Try:
    - Go to Settings>Sounds and see if a volume limit is set.
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    iOS: How to back up your data and set up as a new device
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar

  • Report variants missing in PC00_M10_REC after upgrade from 4.7 to ECC 6.0

    After Upgrade to ECC 6.0 from 4.7 version, two  variants for  Payroll Reconciliation report  in PC00_M10_REC  are missing.
    These variants were of users who have left the organisation/company.
    Can anyone help me to restore those variants and tell me why those two variants got deleted.
    Thanks in advance
    Rohan Das.

    Try to use program RSTRANSP , this will create transport request for variants. after creating the variant your basis team can move to ECC box
    a®

  • ALV Layouts are missing in ECC6 after upgrade

    Dear Friends,
    we have an issue of missing ALV Layouts in ECC6 after upgrade of ECC6 from 4.7 version
    For example, we have a custom table ZRCILOT, data displayed using tocde se16, but when we check layout are missing in ECC6 but the same exist in 4.7 version.
    please check the attached screen-shots.
    kindly suggest, is there any possibility to retrive it.
    Thanks,
    Munvar Basha.

    Hello
    Variants should be preserved by the upgrade...
    You could export/import layout using the report from the here under note
    Regards
    551178 - FAQ ALV Layout
    During the upgrade of or when importing Support Packages?
    Answer: Layouts created by the customer are retained and you can continue to use them.
    643330 - ALV layout: Importing and exporting layouts

  • Widget Icon missing fro Dock after upgrade to 10.6

    After upgrading to Snow Leopard, I noticed my Widget icon went missing from the dock.
    I have also noticed that I cannot put additional application icons in the dock. They will stay there for a few seconds and then disappear. Anybody have any suggestions on what to do ??

    This happened to me as well ... eventually. It was working for some time then poof! No matter how many re-installs from different download locations the dock still won't show up. The interesting thing is that after locating where the widgets itself were they would run after all ... just that the dock which I am so used to isn't there anymore. Perhaps thats a good thing and does make the desktop feel like Vista/Windows7 but I would rather have the option to turn the dock on/off at my convenience and keep everything in line.

  • Transactions missing in Role After Upgrade from 4.6c to ECC 6.0

    Hello Friends,
    I did multiple searches on this question but it was unsuccessful. We are upgrading from 4.6c to ECC 6.0. We are testing roles to make sure the migrate properly.
    Irrespective of su25. There are transactions that are not obsolete and are missing in ECC 6.0
    For example if I have a role called FIROLE. Which has 20 tcodes in 4.6c. When we upgrade to ECC 6.0 8 tcodes will be missing. This is not because the tcodes become obsolete.
    What is the best way to approach this. Should we be testing each role?
    Thanks!

    Hello Imran,
    transactions can be 'obsolete' also if they still exist.....
    If the application developers create new functionality, new look,.... in new transactions but still let the 'old' ones in the system.
    Just think about the ME2*-transactions..... The developer can decide, that such new transactions should replace the old ones after upgrade in the roles or let the old ones as they are.
    You can get an overview about replaced/obsolete transactions by reviewing table PRGN_CORR2 (make sure, that you have the latest version, according to [SAP Note 991377|https://service.sap.com/sap/support/notes/991377]   !!!). SU25 gets its information from that table.
    b.rgds, Bernhard

Maybe you are looking for

  • PDF Wont Print on Safari

    Ive had this problem for years and just started using another browser when I had to print any PDF FIles. While I can open and read them while in Safari, whenever I try to print all I get is a blank page.  Thats all that shows up in the print preview

  • Online Store Purchase

    Sorry, I know this is the wrong forum to post this, but there's none that really fits what I need. I bought a keyboard from the Apple store online, and I received it today. It came in a large brown box. The keyboard is inside a smaller box. Does anyo

  • Where did my hard drives go in finder?

    I'm new to 10.7, Finder/desktop do not have icons for my hard drives.  How do I find them and navigate the structure to find things and troubleshoot?

  • UML Entry menu doesn't exist

    Hi all, How to create UML diagram class ? I downloaded the lastet Jdeveloper and can't find UML entry in File-> New menu Thanx

  • Want to burn my first "movie" to DVD, but...

    I made my husband a slideshow "movie" from my daughters, as a valentines day gift. I thought burning it would be the easy part, but nope! I made it in imovie, and have been able to preview it in idvd, but whenever I hit burn, the little spiral thing