HT203167 My brother-in-law tried to transfer all of my I Tunes music to a flash drive, as a back-up for me. It seem that he lost all my music, and now, I'm afraid to plug in my I Pod, for fear I'll lose that too. Now what?
My brother-in-law tried to back up my music on a flash drive. It now appears as though I don't have an I Tunes account. Worse yet, the flash drive only contains all the artists for the alphabet "A"! Can someone PLEASE help me?
See Recovering your iTunes library from your iPod or iOS device.
tt2
Similar Messages
-
can anyone help me get my power point from my mac to a flash drive to work on a pc?
And make sure the flash drive is formatted as FAT32. The PC won't read anything from a Mac OS formatted drive, and your Mac can't write to a NTFS (Windows) formatted drive.
If both the Mac and PC support it, exFAT is also possible and allows for larger file sizes. -
I have just updated to itunes 11 and when I plugged in my ipod classic it locked up. When I tried again it said my ipod was corrupt and advised I reset it. I reluctantly did this as I lost all my music and now itunes just locks up when I plug in my ipod.
Not if you first do a sync and have iTunes make a backup. However, if your only copy of the iTunes data is in the Touch, then you need to first copy the data to a new iTunes Library using third-party software such as Phone To Mac.
-
I got a new computer for home and I am trying to transfer all of my music, movies, photos and apps from my IPAD. I have been using my work computer ofr this in the past but want to change to my new home computer. I can't figure out how to do this without erasing everything from it.
This is an extract from one of our senior participant; hope he doesn't mind me reproducing it here
Syncing with new computer
1) Without connecting your iPad to your laptop, start iTunes. Click on Edit. Click on Preferences. Click on Devices. Check the box next to "Prevent your iPod etc. from automatically syncing." Click OK.
2) Now connect your iPad to your laptop and start iTunes.
3) When iTunes starts, right click on your iPad under Devices in the left column. Select Transfer purchases etc.
4) After it finishes transferring all your apps to your new laptop, right click on your iPad and select Backup your iPad.
5) After it finishes backing up your iPad, right click on your iPad and select Restore etc.
6) After it finishes restoring, left click on your iPad , then click on the Apps tab on top, and check the box next to Sync Apps, then click on Apply below.
If everything on your iPad looks good after the sync, go back and click on Edit / Preferences / Devices and UN-check the box next to Prevent your iPod etc. The only other thing you may want to check is if your contacts, bookmarks, etc. are syncing correctly now. If not, go to the Info tab after connecting and make sure you indicate which features you want to sync with what sources. -
I'm using Time Machine and a LaCie external drive to backup. I also have a 8 GB LaCie flash drive I want to use for small jobs. If I plug the LaCie flash drive in, is my Mac going to think it is the LaCie external drive and start trying to backup?
no.
-
I am not able to open the settings icon from my old iPAD. When I try to select the settings icon it looks like it's about to launch and open however; it will not stay open. I am trying to transfer all my data from my old iPAD to my new 4th gen iPAD.
Try a soft reset - press the home and power bottons and keep them pressed until the Apple logo comes on. Then see if you can access Settings.
-
Hi...
Tried to transfer all my data to iPhone 5 from iPhone 3GS lost ONLY my email and app data? But weird thing is, its still on my old phone!!!
Do you know why and how I can fix this?
ShelleyHow did you "try" to transfer this data? The only way to restore App data is by restoring from a backup that contains the App data, then syncing the Apps back to the phone. Emails are not included in any iPhone backup, only account settings.
-
Ipurchased music and now I am unable to transfer it to mp3 player. I dont want to have torepurchase my music again. Does anyone have any suggestions
Read the instructions that came with your mp3 player to learn how to put music on it.
-
After updating to ios 8 through itunes, I lost my music and now I cant transfer some music from itunes (macbook pro) to my iphone 4s back. Any idea how can I do that?
After posting this, I've since found out that my iOS iTunes App on my iPhone 6 Plus works all OK when on WiFi, it just won't work when on the data/3/4G connection.
Anybody else having this same issue since updating to iOS 8.3? -
I tried to export photos from iMac to iPad using a USB flash drive. The photos are on the drive but when I plug it into the iPad, the iPad says the device requires too much power. Any ideas of what type of USB flash drive I should use?
You can transfer photos outside of iTunes. I do it all the time. THat said, i have a 50/50 success rate with them. I'd avoid sandisk and kingston, their bundled software triggers the 'too much power' warning.
I've had mixed luck with lexar, some work, some don't.
I did have good luck with an older 4 gig geek squad one.
Look for drives without software on them, without bright LED lights and I haven't gotten any larger than 4 gig to work, but that may just be me.
For a less troublesome way? h onestly, I use a SD card that I've formatted with the DCIM folder. I've never had one of them trigger the 'too much power' warning. Just make sure they're not SDXC. those don't work. -
my ipad has gone in lost mode by mistake and now i have it and i enter the password and i cant enter my ipad how can i enter or restart the ipad and start back over new
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary. -
Hi I've just synced my iPhone 5 to my dad's computer to get an album I downloaded on there and it wiped my phone of all of the music and now it will not allow me to get it back how do I get my songs back because every time I comes up with I have to wait 63 days to get it back
You might have better luck in the iPhone community. I'll ask the hosts to relocate your post.
iPhone community
Have you tried syncing the iPhone to your computer and restoring from the backup to see if you can get your other songs back? If you purchased the new album with your Apple ID, you should be able to download it to your computer to sync. -
How do I transfer all my data and applications to my new iPad from my old one ?
How do I transfer all my data and applications to my new iPad from my old one ?
This may also be useful. Although backing up and restoring via iCloud works, doing it via iTunes may be better, and here's why:
Via iCloud your actual apps are not backed up, just a record of the fact that you legally own them. When you restore, your new device knows it's OK to download and install them again from the App Store. This is fine for all apps that are still available, but for those that have been removed from the App Store you're going to be without them.
It is also a lot faster to transfer a ton of apps from iTunes via the cable than to download them all over wifi.
Another advantage of doing it via iTunes is that all your network/wifi settings and passwords will be included in the backup/restore process. (Make sure you have selected "encrypted backup" for this to happen.) This way you will not need to mess around typing them all in again.
I've tried both methods and would definitely recommend going "old school" via iTunes for these reasons. Hope this helps. -
I have a school ipad with iCloud using a different ID (my school email address) . I am leaving and want to buy my own ipad and transfer all my data and docs to my personal iCloud account but don't know how to do this without deleting all data and photos?
Heya Katie!!
So, the article you have there, HT4895, is pretty good. Just look at the FAQ section of it.
But basically, you will want to create a backup on your computer through iTunes...Just plug your current iPad into it and make sure your iPad and iTunes are logged in with the same Apple ID. At that point, just create a backup.
When you get your new iPad, and before you plug it in or set it up, follow the directions in this link to change your Apple ID. http://support.apple.com/kb/HT5621?viewlocale=en_US
Once you have that done, plug your new iPad into your computer to sync up with iTunes. Follow the directions for Restore from Backup and it should bring all that info back to your new iPad.
And changing your Apple ID email info will allow you to have your own!!! This should solve all your issues and GL!!! -
I used another computer a while back to get music and now their account is not allowing me to add music onto my ipod, from my computer, on my account.
What computer did yu last sync with? Yu can only sync with one computer/iTunes library.
You can however manage musiic amon different computers.
Using iPhone, iPad, or iPod with multiple computers
If you need more help please provide more detail on what youd have done and tried on both computers.
Maybe you are looking for
-
Recordset element in payload - ignoreRecordsetname (true) used
Dear All, The XML for my source at the design time reads as follows, <?xml version="1.0" encoding="UTF-8"?> <ns0:mt_sales_order xmlns:ns0="filerfc:xi"> <sales_data> <sales_order>1234</sales_order> <delivery_blk>01</delivery_blk>
-
Hi Guys, I have some problem in this query... select decode(sign(1100-1000),-1, '-1', sign(1100-2000), +1, 'N. A.', sign(1100-1001), +1, 1100) from dual; If I use 800 instead of 1100 the query results fine but with 1100 instead of 800 I receive this
-
Select * from table_name
Hi All, I have small scenario like i have one table X which is an empty table. When i do a select query on that table X, its giving output after 5-10 mints. What will be the reason? Thanks, Mani
-
Anyone know a workaround for when TextEdit reverts to Helvetica 12 even after you set the new default to say Verdana 14 every time your drop an image into an RTFD? Kind of defeats the purpose! Is there a way around this? THANKS!
-
C to Abap - librfc32.lib
Hi friends, I am trying to call a Abap Function Module in C Program. In my C program i am getting an erro while ececuting. It has been compiled without errors, but i am facing linker error that "Undefined Symbol _RfcOpen". But i have included the pat