HT203167 When I try to play an audio book on my Iphone or Ipad I get the intorduction ie. This audio book is brought to you.... and then the book starts to only play with no audio. This has happened on five books they used to play others play fine
I have a number of books on my Iphone and Ipad some play fine while others start with the introduction and chapter title and then go silent. This has happened on at least five books which used to play fine. Why is this happening and how do I remedy this?
Send your tv feedback here
Similar Messages
-
When I open Firefox it gives this error, ReferenceError: mtRpt is not defined, and then open normally. How do I fix it?
This issue can be caused by an extension that isn't working properly.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* [[Troubleshooting extensions and themes]]
In Firefox 4 you can use one of these to start in <u>[[Safe mode]]</u>:
* Help > Restart with Add-ons Disabled
* Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows) -
What does this mean?
My iphone 4s just developed a similar problem. Ultimately, after a visit to the Genius Bar at which I was offered a replacement phone for $149, I took the phone to a non-Apple repair shop which diagnosed the problem as tarnished pins in the docking connector and replaced the connector for $49.
The symptoms I experienced were that the phone would not pull a charge. I tried different cables, wall outlet versus computer USB connection, etc. The screen stayed black until I depressed the sleep button, at which time the red battery / lightening bolt symbol would flash three times and then the screen would go black.
If your battery is dead, that icon will not show up at all. If you get the icon, it means your battery is run down and needs to recharge, but the defective docking connector is preventing the battery from taking the charge. -
I download radio programmes via Podcast, but have recently found that some episodes play for only 30 seconds and then the whole app quits. This happens even though the whole episode has downloaded. I would be grateful for advice.
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Delete the problem episodes and redownload.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device. -
When I try to open a file in photoshop CS, Elements or Lightroom I get the message "Could not complete request because it is not the right kind of document" This just started happening today. The only thing I have done differently is change my file handling to raw + jpeg on my Nikon 7100.
I downloaded camera raw 8.7 and I am now able to open my raw and jpeg files. Thanks
-
Using windows 8 - receive message "ipod detected but cannot be identified properly" when connecting ipod nano 7th gen. Have unisntalled and reinstalled itunes from apple site as advised with no luck. Has anyone else had this problem and resolved it please?
This is how it's displayed: http://i50.tinypic.com/nd7vk7.jpg
And this is what happens when I click properties and 'search for solutions': http://i47.tinypic.com/2iu3vrc.jpg (the box disappears after that, apparently having done nothing, when I search online for software it informs me my computer already has the best/latest installed)
I use a Toshiba Satelite L350-170, my Vista is a 32-bit Thankyou!
Message was edited by: Martha11 -
I'm having the same buffering issues that other users are having when I try to stream a short video from my Iphone 4S to my Apple TV
Has anyone heard back from Apple on this bug ?Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Restart your router. (Also try removing it’s power cord for at least 30 seconds)
Restart your mobile device. -
I have Windows 8 64 bit. iTunes works fine with my iPHONE but when I try to go to the iTunes store it loads to about 80% and then the message "iTunes has stopped working"
COPY QTMovieWin.dll FROM c:\program files (x86)\common files\apple\apple application support\ INTO c:\program files (x86)/iTunes"
-
My computer comes on but with the loading bar under the apple logo. The bar only loads partially and then the computer shuts off. How do I get this fixed?
If you are still under warranty and/or have AppleCare, call them. Let them deal w/it.
OOW: Please advise of which model iMac you have?
http://support.apple.com/kb/HT1758 How to identify iMac models
OS X Mavericks (10.9)
If/when you get your problem resolved, you need to update your OS. -
When I try entering a new event in iCal on my MacBook Air, I get an error message popping up on my screen that says:
The server responded with “502”
The request for account “iCloud” failed.
The server responded with “502” to operation CalDAVSetPropertyQueueableOperation.
The request for account “iCloud” failed.
I am then given the option of staying Online or going Offline.
Can anyone help me?
thanksHello b.krushel,
Thank you for using Apple Support Communities
Any number of things could cause this issue, so I would recommend this article named iCloud: Troubleshooting iCloud Calendar found here http://support.apple.com/kb/TS3999.
These sections in particular:
General Troubleshooting
Make sure there are no current issues listed on the System Status that affect iCloud Calendar. The System Status is located on the iCloud Support webpage.
Make sure you have fully enabled iCloud Calendar for the client you are using (for more setup and troubleshooting information on iOS, OS X, Windows and iCloud.com, see the additional details below).
Check to see if the issue you are seeing is covered in iCloud Help. To search iCloud Help, visit help.apple.com/icloud.
Check your settings and preferences as something may not be set up correctly. For example, having incorrect date and time settings can cause issues which are easily resolved by entering the appropriate settings.
Troubleshooting Calendar on OS X Mountain Lion (iCal on OS X Lion)Note: For instructions on setting up iCloud Calendar with Calendar or iCal on your Mac, see iCloud Setup.If you are having trouble with Calendar or iCal on a Mac and you are using iCloud Calendar, try each of these steps, testing after each to see if the issue is resolved:
Make sure you are using OS X Lion v10.7.2 or later. Click here for help verifying the version of OS X you are using.
Make sure your computer is online. Attempt to view www.apple.com and iCloud.com. If you can't connect to the Internet, your iCloud calendars and events will not update in iCal. Click here for more information about troubleshooting your Internet connection.
Verify that your iCloud member name is entered into the iCloud Preference pane in System Preferences. See iCloud Setup for more information about setting up iCloud on a Mac.
Make sure you enter and update calendar information in the iCloud section of Calendar or iCal. Only calendars and events in the iCloud section of the Calendar or iCal Calendar list will be pushed to iCloud. Both Calendar and iCal for the Mac support the display of and interaction with multiple accounts and datastores, for example, iCloud, On My Mac, Exchange, Google, and so on. This makes it easy to create or modify events or calendars in a section of Calendar or iCal that may not be updating iCloud. Learn more about moving local calendars to iCloud.
In some cases, you may find that you have data duplicated in both the local On My Mac and the iCloud sections of Calendar or iCal. Learn more about resolving this issue.
You can make the iCloud calendar your default calendar for all new events. In Calendar on OS X Mountain Lion, choose Calendar > Preferences > General, or in OS X Lion, choose iCal > Preferences > Generaland under the Default Calendar heading, select one of the Calendars under the iCloud heading. Close the Preferences window to save this change.
If recent changes simply don't appear, try forcing Calendar or iCal to refresh by selecting Refresh All from theCalendar menu.
Make sure your account was successfully created in Calendar on your Mac (or iCal). After upgrading to iCloud Calendar, you may need to quit and reopen Calendar (or iCal). To confirm your account is configured correctly in iCal:
Open Calendar (or iCal).
Open Calendar (or iCal) Preferences.
Click Accounts. You should see an account with your iCloud member name entered.
Turn iCloud Calendars off and back on
Quit Calendar (or iCal).
Choose Apple () menu > System Preferences > iCloud.
Remove the checkmark in the checkbox next to Calendars.
Close System Preferences and wait about a minute.
Open System Preferences and choose iCloud.
Replace the checkmark next to Calendars.
Close System Preferences.
Open Calendar (or iCal) and test to see if the issue has been resolved.
Restart your computer. This may sound simple, but it does reinitialize your network and application settings and can frequently resolve issues.
Take care,
Sterling -
Workflow for marking clips and then exporting them out as individual clips with audio?
Hello,
I'm just starting to use Prelude. I recorded an interview for my daughter for a school project last week. The interview went well, but I want to mark as "sub-clips" all of the video interview's question/answer combos (e.g. "What is your name? My name is John Doe.") and then save them out to individual clips rather than have to manage the full size files (about 40GB in all from my Panasonic GH3, 50mbps, IPB MOV) with clip markers. I'll keep the originals as backups, but would really rather work with the individual clip files.
Any help with this would be greatly appreciated! I would think this would be a very simple and common function. Basically, just dividing up the original video into multiple, standalone video clips with the same bit-rate, encoding, etc., but with new headers/EOF markers. Just chopping the original files up into chunks with no changes or reencoding necessary. If I can do it the way I imagine it, it should be a very quick process, at least compared to transcoding the files.
Best regards,
ScottHi -
Meg The Dog's suggestion will work if you don't intend to bring in all of your media off the card. The Partial Ingest method will allow you to selectively create subclips during ingest and not transfer the full original clips.
However, you do state you plan to keep all your media - not just the parts you want to subclip. So here's my suggestion for the workflow:
1. Ingest all your media from your cameras (the entire clips - not the partial clip method)
2. Open each clip from the Prelude Project Panel and create your Subclip Markers using Prelude logging tools.
3. In the Project Panel you will find new entries will appear for each SUBCLIP Marker you add to your master clips.
4. You can organize you subclips into BINS as needed to keep track of the segments of your video
5. When you're ready to create your timeline of subclips you can either
5a. EXPORT all the SUBCLIPS into their own files (select all subclips you want to export and use the FILE->EXPORT->MEDIA menu command)
or
5b. Drag-Drop your subclips into a ROUGHCUT in Prelude to order your story. Then use the SEND TO PREMIERE PRO feature to send the Rough Cut into Premiere pro where you can finish your edit. All the media will come along for the ride into Premiere Pro (including your Subclips). You can then add titles and any effects easily enough in Premiere Pro).
There are some other options here you can also try out which might be interesting. For example, you can add transitions and any additional audio tracks to your ROUGH CUT directly in Prelude and then EXPORT the Rough Cut as a final movie - and not need to move to Premiere Pro unless you have wider editing needs.
Hope this helps!
Regards,
Michael -
When I try to install Itunes64setup software in a w vista 64 notebook I get an error message "The application has failed to start because its side-by-side configuration is incorrect." Can you help me ?
This forum is for questions from those managing sites on iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes for Windows forum.
Regards. -
I can't install apps on my iphone using itunes from my PC ! I've downloaded the apps from itunes store. When I try to drag apps from itunes library to iphone, nothing happens. What should I do?
Try downloading the apps from your phone
App store > tap updates> tap purchased> tap not on this iphone> click on the cloud with the down arrow for the app you want to download" -
Whenever i try to manually sync my iPhone with a new playlist on iTunes (on my laptop), it always gets stuck in step 7, Waiting for changes to be applied, and then nothing happens. I'm running the latest operating systems on both my iPhone 5 and macbook
I really don't appreciate the fact that no one from Apple seems to be dealing with the many, many threads that have started on this topic since iOS 7 came out. In any event, I seem to have solved my problem with a full software restoration -- that is, iOS software restoration.
I clicked on "Restore iPhone..." which does a complete reinstall of the iOS but also all apps, photos, songs, etc. Took about 45 minutes, but seems to have worked.
I had previously tried reverting to a backup of my iPhone, but that did not solve the problem. Only a full restore solved it. -
After installing the new software to my iPhone 4S , my dream zoo either will not start or when it does it has a blank screen that has a few icons on it that wont work. How can I fix this is it possible to go back and reinstall the older software ?
Unfortunately I tried that and it didn't work. Thanks for the help though. I tried to uninstall and it said I couldn't because the file is corrupt or something, but I think I finally got it uninstalled and/or deleted or whatever, but now I try to reinstall/download it again from the beginning and I can't. No matter what I do I can not get Firefox working again. No matter how many times I try to redownload it. Any other suggestions?
Maybe you are looking for
-
How do I add Camera Raw 7.4 to my PSE 11?
I have bought PSE11 to use with my Nikon D7100. It won't speak to the RAW files. I've attempted several times to update as advised, it won't work. I have downloaded DNGConverter_7_4.exe now what do I do with it? I am about ready to use my laptop as a
-
Transfer Songs from Ipod to New Computer and New Itunes Installation
Hi, I want to transfer songs on my Ipod to a new installation of Itunes on a new computer. I get a message that my Ipod is synced to another library and that I can only be synced to one library and that my ipod will be erased and synced to the curren
-
Subcontracting Check Box in Maintenance Order
Hello Help me to know if we are able to create the PR via control keys PM02 & PM03 then what the use or funcationality of subcontracting check box in maintenance order. Regards Kapil
-
Can I use Face Time on Snow Leopard 10.6.8
Can I use Face Time on Snow Leopard 10.6.8
-
Cannot install OS 10.6.3 on my MacBook currently running 10.5.8?
I have a MacBook 5,2, currently running OS X 10.5.8. I have the install DVD, but when I click the "Install Mac OS X" icon, before I can even accept the terms, I receive a message stating that "Mac OS X Snow Leopard cannot be installed on this compu