HT203175 My ipod touch driver wasnt correctly installed and now i have an error code-1. Can anyone help?
I just recently purchased an ipod touch second generation and when I sync it with my laptop (hp pavillion g series with windows seven) and it said the driver didnt successfully sync or something like that. Can anyone help?
Does the iPod connect to other networks?
Does the iPod see the network?
Any error messages?
Do other devices now connect?
Did the iPod connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Similar Messages
-
My ipod touch has a white screen and I am unable to reset it. Can anyone help? I
Hi... any help would be appreciated. My iPod Touch has a white screen. I have tried resetting it following the directions on Apple's site and have not been successful.
Can anyone help?Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
i plugged in my ipod and now i get the error message: Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled" - i have a MAcBook pro and now my USB ports do not work - can anyone help me ???
Sometimes you have to reset the SMC two or three times for it to work, don't know why. I've seen that error message before and 100% of the time it was fixed with an SMC reset. I suppose it's possible that your keyboard or mouse IS drawing too much power, do you have access to another you could try?
-
when open photoshop a message came up saying photoshop has given up waiting for assesment of the display driver. enhancements that use the graphics hardware have been disabled... can anyone help?
The best thing to do is to go into Help > System Info, copy and paste the contents into your reply.
One of us or several should be able to sort it out for you.
Gene -
Hi all, I've recently updated my ipod touch to the ios 6 and now i cant seem to use it with my itunes
whenever i connect my ipod to itunes, a notification saying that i need a newer version of itunes. However, when i check itunes for software updates, it seems i have the current version of itunes
I am at a lost of what to do as i can no longer sync my ipod touch with my itunes.
Help Pls!
thanksYou might tell us many more things so we don't have to guess and might be able to help.
What computer do you have?
What iTunes are you running now?
What OS X system are you running are your computer now? Or is this a Windows machine?
Let us know a little more info. -
my ipod touch was submerged in water and now it is telling me to connect to itunes, but itunes won't connect until i put in the passcode, and i can't do anything to my ipod until it connects to itunes. so, basically i can't do anything from the ipod or to it from the computor. what should i do?
Restore...
From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.
There's more to try but let's go a bit at a time. -
hi. my ipod touch i guess finished updating. and now when it trys to turn on, a blue screen comes up and then the blue screen changes to a white one. and i cant do anything to it. also it own connect to itunes. help pls
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Some other users have had the same problem -
I haven't used my iPod touch 4g in a while and now it won't turn on or connect to my computer to charge. holding power+home isn't working either. i've had it plugged in for a while, but i'm pretty sure that's pointless if it won't even connect....help?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I bought an old iPod touch It is 6.1.6, i would like to add a new icloud account but it can't let me. this iPod touch belonged to another person and i don't know where is he can you tell me please how to add a new icloud account??
The 4G/iOS 6 does not have an Activation Lock. That started with iOS 7.
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software -
a while ago i backed up my ipod touch 4g and yesterday it was acting up so i restored it and it deleted ALL of my pictures so can anyone help me to get them back?
currently running iOS 4.3.5If you restored from backup all the photos in your camera roll that were in the backp should be restored to our iPod. However, photos that are synced to the iPod are not in the backup. You will have to resyc them to the iPod. If the synced photos are no longer on the computer then the photos are lost.
-
Installed a cloned 500g solid state hard drive but unable to boot in macbook pro. Can only hear drive spinning quietly, no chime to launch OS. Total darkness. Can anyone help? thanks in advance!
Hi Retired Engineer,
Yes, you're right. It is the Seagate Momentus XT and it does not spin. That was just a layman's term for computer illiterate like myself. After hours of inspection & a prayer, I discovered by pulling the 4 GB memory chips out I put in, replacing the 1.5 GB back in for the memory which I upgraded 3 years ago. Chime! It works! So it is the 4 GB memory causing the problem. But why? Does that mean my Macbook Pro does not support with more memory? The fan noise is now gone which I suspect it was caused the other overheating Seagate hard drive & eventually causing the crash. However, the top bar temp indicator shows 174˙F @ 000rpm. Does that also mean the fan on the left is not working? (the right fan on the board works). Do they work simutaneously? Or left fan is just a back up?
Thanks for your reply & kind gesture. -
Updated ipod touch to ios 6.1 and now all the videos in playlists are not shown. What to do??
Thanks !
The only thing I didn't do right is that I didn't Erase all content from iPod... I did it from iTunes...
Technique worked for me ! -
I synced my daughters ipod touch with my apple account and now all of her contacts are on my iphone and my contacts are gone. What happened???
Try settings -- messages -- send & recieve and see if your email and phone number are in there and if there is only a check mark next to your email address. If so just check off your phone number and try that.
-
Recently updated my 3rd gen Ipod Touch firmware (4.3.3) and now all my apps won't open! When I click on an App it attempts to open and then closes....HELP!
Try the basics from the manual:
restart.
reset.
restore.
iPod touch User Guide (For iOS 4.3 Software) -
My iPod Touch fell into the washer and now does not start. What can I do to fix it?
If it is totally dry:
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
Maybe you are looking for
-
Hi all its anir again...pls guide me the updating process OTA in my iphone 5 ..as i forgot the password..and find my phone is on..n dont hv icloud password...can i update it to ios 8 widout icloud password. ... N tes can i reset it..
-
Sorting a Cross-tab in both directions
I'm using CR2008. I have a list of doctors, facilities, and their monthly charges. If I put Doctors down the left and Facilities across the top, I can sort Doctors by order of charges descending, but I can't see how to sort Facilities the same way. A
-
Hi All, I know that I can modify the skins for the Flash DataGrid Component inside an FLA and then export as a SWC to use if in my projects but I need to be able to modify the style of the component at runtime. Can anyone point me in the right direct
-
Hardware : Macbook Pro Operating System : OS X Mavericks v10.9.1 Browser : Firefox v26.0 All of a sudden, two finger scrolls doesn't work. Thats only when I am within Firefox Window. Everywhere it just works great. I got NO scroll bars at the edges o
-
Hi expert I want to do multiSort in java webdynpro 7.1 I know how to do single column sort but i like to go for multi column sort any one have any idea? In advacne Thanks