HT203176 magic mouse cursor will not move

Magic Mouse cursor will not move. Scroll works. right click works replaced batteries

I'm so sorry but I overlooked your response in the previous post.
I think you there are two options to try.     One;
Reset the SMC (Systems management control)      https://support.apple.com/en-gb/HT201295 ....
Two: You may have a problem with interference which could be from a TV set, particularly one of the new smart TVs, anything electronic you've either moved into the room or changed its position.   That could include another mouse or trackpad.
Again, sorry.

Similar Messages

Satellite L350 - Cursor will not move

My L350/L350D cursor will not move from middle of screen after boot up. All is good with system just with display sreen & icons.
Ideas please.

Hi
Im also a little bit confused the cursor can be moved either using the touchpad or USB mouse.
If the touchpad cannot be used, please check if its not disabled.
As mentioned by PinkPanther, the function FN + F9 enables and disables the touchpad.
But the cursor could be moved using mouse connected to USB ports.
So even if the touchpad is disabled, the USB mouse should control the cursor.

My cursor will not move on my MacBook Air. I've forced a shutdown, but it still won't move, and now I can't move the cursor to click my user image to log in. What should I do?

My cursor will not move on my MacBook Air. I've forced a shutdown, but it still won't move, and now I can't move the cursor to click my user image to log in. What should I do?

Trackpad does not work properly

The select function in Pages and other apps gets stuck and the cursor will not move. What do I do?

The select function in Pages and other apps gets stuck when I touch a word and the cursor will not move. What is the answer for this problem?

Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

Mouse cursor will not change to brush cursor in photoshop cs6

Hello can I ask for your help please.
My mouse cursor will not change to a paint brush cursor. I have tried the preferences/cursor selection but it still does nothing, I have also tried resetting the brush tool and still nothing.
I am also using a wacom but I don't think its my tablet, I am using a IMac.
Thank you.

Is the Caps Lock on?

Cursor will not move

First, everything was working well for a few days, then it didn't. It connects and turns on fine (the menu is present and clear). I cannot move the cursor. It will not go up, down, left, right or back. When I try to reset the light blinks but I still cannot move the cursor. I have reset and unplugged. I have even tried using the remote for my iMac (after pairing). It will go to screen saver and there it stays until I goto TV or power down. I do not believe it is a remote issue. I repeat ... the cursor will not move. addendum - When I repress anything on the remote, the light blinks ... nothing else happens ... nothing. grrrrrrrrrr arg!

Fixed it - the pairing and unpairing was the key - once I realized I was looking for the number of blinks, I it worked out. I think it was opposite of the instructions but maybe I don't know my left from my right. Merry Christmas

Hi my trackpad is frozen and I also could not get force quit to work, I closed the top down and now I cannot get past the login and the cursor will not move, does anyone have any ideas

Hi my trackpad is frozen and I also could not get force quit to work, I closed the top down and now I cannot get past the login and the cursor will not move, does anyone have any ideas

Try these two steps:
Intel-based Macs: Resetting the System Management Controller (SMC)
Resetting your Mac's PRAM and NVRAM

Satellite Mouse Pad will only let me scroll, cursor will not move.

Starting to get frustrated with this laptop.
I'm having to resort to using a usb mouse to even get to the page, which something that I don't want to be doing.
The most will not move at all, it'll only let me scroll up and down (when sliding with one finger).
I've tried reinstalling the driver, to no avail.
I've had this laptop for about a year now, never had a problem until now.
It literally came out the blue. Searching on Google, it seems to be a well known issue, but there's not one solid solution to the issue, which is ridiculous.
The mouse only move if I'm holding down either the right click or left click button, which is useless to me.
Any help?

I don’t know what notebook model you have exactly, but if you have some problems using the internal touchpad, i would recommend you to recheck the additional touchpad settings:
Control panel -> mouse -> last tab (click settings button)
If you will not find any settings related to this touchpad issue, please check if the touchpad isn’t disabled. Usually FN + F5 (in some cases FN + F9) would enable or disable the touchpad.
Last but not least the issue could be related to hardware malfunction but before talking about hardware issue, the notebook should be recovered to factory settings.

Using the magnify button in Ancestry.co.uk, the cursor will not move away from the actual record window. The only way to exit is Alt F4 which closes Firefox. When reloading, Firefox reactivates the same record but without the magnify button activated.

The magnify also does not function properly.

There is an easier work-around. Rather than closing the browser, completely, you just have to get the system to change the focus. You can do this by pressing ALT+TAB (to switch windows). Then, you can turn the magnify option off and just go with the Zoom. (There is a secondary problem, in that the last magnified section of the image stays magnified. Going back to the record and then back into the image will clear that. But at least you don't have to close the entire browser!)

When i hold down any key my cursor will not move at the same time and i need help!

the title says it all, its a major problem while gaming and i would appriciate suggestions on how to fix

Model of a laptop? And are you sure that you're not trying to play games on a touchpad? Are you using an external usb mouse?

HT3904 magic mouse cursor won't move, scrolling and clicking still works.......

does anyone have a fix for this? I would jsut return the mouse, but I was given the mouse as a gift from my dad, and i don't think he still has the receipt........Any help?
The mouse will click left and right, and will scroll, the green light is also on, but the little optical lights arent......I did a PRAM reset and have also tried
using the mouse to awake the computer from sleep mode with no success (these are both fixes recommended by users on other sites)...
thanks for your time,
Dan

Try resetting your system's PMU. If you have a desktop this can be accomplished by unplugging the computer for at least 15 seconds, then plugging back in and waiting 5 seconds before turning on again. On MacBooks (newer ones anyway) this can be done by holding down control-shift-option and power, then releasing all at the same time.

Mouse cursor is stuck top left corner of screen. It will not move. Tried both my Bluetooth mouse, and a USB mouse. Not moving but will click

Tried un pairing the Bluetooth mouse and reconnecting it. No change. Tried both those resets people suggested to others in the forums, that didn't help either. Borrowed my friends USB mouse for his Mac, the same thing. Cursor will not move, but the click works.(this is what is happening for both)
If you are kind enough to offer help, please be aware of the following: this is my first Mac. I really know nothing about them.

Yes, once when I first noticed it, and each time I tried both the pram reset, and when I did the other reset (holding down p&r and the other two buttons before the grey screen, and waited for it to reboot from there). Can't remember what that reset was called

Trackpad will click and select but will not move cursor

After breaking the trackpad in my early 2008 MBP I replaced it.
Upon startup the trackpad will click and select but will not move cursor... I have tried all system resets short of wiping and reinstalling OS.
Any suggestions?

Because the click has to deal with a physical button press while the movement has to deal with the trackpad detecting the movement of your finger on it.
Just for giggles, if you hold down the Option key on bootup and get to the boot menu on it, does the mouse work then? If so, then it's an OS issue (could be a setting or some .plist that's jacked up.

My apple mouse is not working. The pointer will not move on the screen and it keeps turning off.

My apple mouse is not working. I can get it to connect but it will not move the pointer. Left and right click is working, scrolling, just cannot move the pointer. Also, I have replaced the batteries (numerous times) but the green power light turns off after a few minutes. Any suggestions?

How about clean up LED hole of mouse?

Magic Mouse "click" is not responding but cursor is tracking. Any thoughts?

Magic Mouse "click" is not responding but cursor is tracking. Any thoughts?

First check your settings. If all is as it should be, reset the PRAM.
http://support.apple.com/kb/PH14222?viewlocale=en_US
You may have to do this more than once.

HT203176 magic mouse cursor will not move

Similar Messages

Maybe you are looking for