HT203177 I have a 2TB Imac, 10.7.2, with 2.8 processor and Intel Core i7, with 16 Gb of memory, and 1067 MHz DDR3.  I have tried to backup to a WD 4TB. It ran for almost 7 hours, and then the little box came up saying it had 5 seconds, but would not stop.

I have tried backing up my iMac using Time Machine.  I have 727 GB on the 2 TB internal hard drive. I am trying to back up to a 4TB WD extrnal hard drive.  Everything seems to work fine, even though it took almost 7hours to go through the process, then the little progress box should it had 5 seconds left, but it kept running and running for another 4 hours, until i finally shut it down.
The WD hard drive shows that it has used 1.61 TB on the disk, but I cannot find anything in Time Capsule.  I open the hard drive to see what is on it, and it just shows that it is in progress.
I'm lost and looking for suggestions.

iTunes for Mac
http://support.apple.com/en-us/HT201693
http://www.apple.com/itunes/download/
Was it installed before? Does it show up in Software Update?
Do other updates show up there (realizing that Lion is not getting all the updates anymore as it is no longer being supported).
Apple Downloads
- Always a place to manual download.
MacBook Pro
Mac OS X Lion System Communities

Similar Messages

  • I have a mac computer 3.2 Ghz intel core i3   with memory 4GB 1333 MHz DDR3,  I have recently purchased an new macbook and have yosemite software and iCloud .  I can no longer us my mac to open up recent numbers documents from my macbook.  I am unabl

    I have a mac computer 3.2 Ghz intel core i3   with memory 4GB 1333 MHz DDR3,  I have recently purchased an new macbook and have yosemite software and iCloud .  I can no longer us my mac to open up recent numbers documents from my macbook.  I am unable to upgrade to allow me to get the current numbers version on my mac. What do I need to do to get all my machines woking in harmony again

    On each machine turn on iCloud and sync all the available apps. Apple explains how to set up iCloud in http://www.apple.com/icloud/setup/
    After doing this run software update on each machine and install all the suggested updates. If you still need help installing the most up-to-date versions of iLife and iWorks open the Mac App Store - click the Purchased tab and update all that need to be updated.

  • I've got macbook pro w/OSXv10.6.8 and intel core 2 duo...how do i know if i have leopard or snow leopard?  i'm interested in the new lion

    I've got macbook pro w/OSXv10.6.8 and intel core 2 duo...how do i know if i have leopard or snow leopard?  i'm interested in the new lion

    tiger was 10.4
    leopard was 10.5
    snow leopard was 10.6
    and LION 10.7!!! LOL
    so you have 10.6   which is snow leopard
    you should be ready to update assuming you meet the other requirements.

  • HT4796 my pc sut down during the transfer. my macbook pro says 44 minutes remaing but is not going any further even though i have restarted my pc

    I am transfering data to new macbook pro from pc. During transfer my pc shut down.  I restarted the pc.  The macbook pro is now stuck at the transfer stating 44 minutes remaining and is not doing anything.  i tried a control, alt, delete???

    Wait for the Mac to 'timeout' if an hour passes with no change press the power button on the Mac and hold it for 10 seconds.
    Start the migration again when the Mac restarts.

  • My ipad is locked up with the screen showing the usb port connecting to itunes.  I had not synched by ipad to my computer in a long time so yesterday it was downloading software upgrades for 5 hours.  then the screen was locked up.

    My ipad is locked up with the screen showing  a picture of the usb port with an arrow to itunes.

    Then connect your iPad to your computer and use iTunes to restore. 

  • I have an IMAC and purchased OS X Lion to upgrade from the APP store, and launched the software for downloading, and I have been waiting on this for an hour, and it still says it's downloading? What do I do next?

    I have an IMAC and purchased OS X Lion to upgrade from the APP store, and launched the software for downloading, and I have been waiting on this for an hour, and it still says it's downloading? What do I do next?

    Welcome to Apple Support Communities
    The OS X Lion installer takes more than 4 GB of space, so it is normal for most Internet connections to take the download more than an hour.
    If you want to see the download progress, open the Mac App Store and go to Purchases.
    Before upgrading, make a backup of your files with Time Machine and check that your apps are compatible > http://www.roaringapps.com

  • My iphone 4s got water in the headphone port. I put my phone in rice for 24 hours and the LED light is on. It stays on even when the phone is off. How can I fix it with out spending 200 bucks at apple to have them fix it?

    My iphone 4s got water in the headphone poert. I put my phone in rice for 24 hours and the LED is on. It stays on even when the phone is off. How can i fix it without taking it to apple and spendding 200 dollars to have them fix it?

    Short answer is you probably cannot.  Once water gets inside the device and it is powered on, the damage likely is permanant. 

  • My iPhone 4 has been dead for 24 hours and it has been charging for 12 hours. I have tried holding the home and lock button down but it still has the black screen, what is wrong with it? It just randomly died on means won't turn back on

    My iPhone 4 has been dead for 24 hours and I've been charging it for 12 hours and it still won't turn on. I have tried holding the lock button and home button down, even connected it to computer but nothing's happening, it randomly died on me.

    Hi Lauren,
    When troubleshooting power issues, we want to make sure we have followed all steps outlined in the following article:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    - Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    - Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion.
    Learn about LCIs and corrosion.
    - Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    - After at least 15 minutes, if:
                   - The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
                   - The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
                   - Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    - If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
                   - If the display turns on, go to step 4.
                   - If the display remains black, go to next step.
    - Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to
    restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    - If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    Thanks,
    Matt M.

  • I recently purchased a refurbed iMac with a 3.06 GHz Intel Core 2 Duo.  It came with iMovie ver. 9.0.5 installed.  I do allot with iMovie and iDVD and would like to get a camcorder to add movie clips.  Does anyone have any suggestions for a reasonably pri

    I recently purchased a refurbed iMac with a 3.06 GHz Intel Core 2 Duo.  It came with iMovie ver. 9.0.5 installed.  I do allot with iMovie and iDVD and would like to get a camcorder to add movie clips.  Does anyone have any suggestions for a reasonably price camcorder that would work with my setup?
    Thanks in advance for any suggestions.

    I recently purchased a refurbed iMac with a 3.06 GHz Intel Core 2 Duo.  It came with iMovie ver. 9.0.5 installed.  I do allot with iMovie and iDVD and would like to get a camcorder to add movie clips.  Does anyone have any suggestions for a reasonably price camcorder that would work with my setup?
    Thanks in advance for any suggestions.

  • I have a iPod classic 2gb. I haven't used in years and I charged it for 3 hours and it won't turn on and I tried resetting and nothing. I plugged it into iTunes and iTunes doesn't even recognize it. I just have a black screen. PLEASE HELP!!!

    I have a iPod classic 2gb. I haven't used in years and I charged it for 3 hours and it won't turn on and I tried resetting and nothing. I plugged it into iTunes and iTunes doesn't even recognize it. I just have a black screen. PLEASE HELP!!!

    I'm sorry it's a nano 2gb silver

  • Hello, i have received an ipad and it is not going to well. i will be charging it for 5  hours and when i unplug it, it says it is still not charged. anybody know what is going on?

    hello, i have received an ipad and it is not going to well. i will be charging it for 5  hours and when i unplug it, it says it is still not charged. anybody know what is going on?

    Same problem for me.
    1. Cannot connect to wifi as icloud password pop up keeps appearing.
    2. tried deleting account. UNable to do so.
    3. tried resetting password by logging into apple id through desktop as mentioned in one of the responses in another thread. Unfortunately the apple id to be reset is the same as being prompted by icloud and hence unable to reset the same.
    Feel like breaking the **** ipad into bits. Stupid of apple to let such a bug in and not offer support !!

  • My ipad ran out of battery and has been charging for an hour and won't turn on

    my ipad ran out of battery and has been charging for an hour and won't turn on, it shows the charging from flat sign and nothing happens, please help, ive tried home and power

    Reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • Trying to upload two songs for two hours and had to upload to and agree to icloud which I have no interest in whatsoever and now all my applications and music have been deleted from everywhere

    Trying to upload two songs for two hours and had to upload to and agree to icloud which I have no interest in whatsoever and now all my applications and music have been deleted from everywhere

    Hey,
    if you know the name(s) of the root folder(s) you want to access (eg. by making a note on the Windows side) then you can make them appear by just doing Shift-Command-G in Finder ("Go to Folder…"), and entering the full path to the required folders.  You can then navigate all the contents as normal.
    HTH,
    S.

  • HELP I'm getting a blinking folder with a question mark at start up? Have been trying to fix this for 3 hours and I dont want to lose all my files by resetting it completely!!

    I currently have Mavericks but my original OS X disk that I have I'm pretty sure is Mac OS X 10.6.6. I'm not great with computers but am usually able to fix problems I have had with mine in the past. I have reinstalled and reset my computer to factory settings before, but I am locked out of my computer completely & can't get to my files to save them & I really dont want to lose them. I was in Safari earlier opening a file, the page started to not respond & froze up my whole desktop so I did a hard shutdown & restarted my computer. I haven't been able to get back into my account ever since. If my only choice is to lose my files & reinstall everything, I need detailed instructions because I actually attempted to do this at first, out of desperation to fix my computer & the installer was asking me to select what disk I wanted to reinstall lion to yet I dont have a disk for that nor do I know what it exactly is asking of me? Please help

    Question (?) Mark, Blinking Folder, or Gray Screen at Startup
    These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
    A flashing question mark or globe appears when you start your Mac
    Mac OS X- Gray screen appears during startup
    In most cases the problems may be caused by one or more of these:
    a. Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
    b. Boot drive's directory has been corrupted - Repair with Disk Utility.
    c. Critical system files are damaged or deleted - Reinstall OS X.
    d. The disk drive is physically non-functional - Replace the hard drive.
    Note that the information I have provided is what Apple recommends, If other users suggest different solutions than found here, then be sure what they recommend does not impact on your warranty, if any, or ability to get continuing Apple service.
    Please don't start removing drives or changing cables unless you know what you are doing and have exhausted other non-invasive alternatives outlined here. If you perform any work yourself that is unapproved by Apple, then you will void any warranty you may have and lose all further Apple Support.
    Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD. Simply boot from the Recovery HD to perform the above.
    Reinstall Snow Leopard Without Erasing The drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.
    Reinstalling Lion/Mountain Lion Without Erasing The Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • My iPod isn't charging so here is the story i went and plugged my iPod in and took a nap for 2 hours and when i woke up i go to my ipod and find that it is still on red it didn't charge 1 bit and it doesn't have a shortage no bent parts???

    My iPod isn't charging. cauas on red so i took it and plugged the charger in the iPod i took a nap for 2 hours and woke up went to get my iPod and it is still on red which ***** cause we are going n a road trip i checked the charger and no shortage no bends and be aware it says it is charging but its not help?????

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

Maybe you are looking for

  • My iPhone will not show up on my Mac desktop or in iTunes, what can I do to fix that?

    I am running on a Mac desktop computer and have the new iPhone 4S with Sprint. When I plug in my phone, nothing happens but charging. What can I do to fix this? Thanks in advance.

  • Problem installing SCE 2010 on a virtual machine

    I'm having issues while installing SCE on a clean Hyper-V virtual machine running Windows 2008 R2. I've tried several options: - all-in-one from scratch, no SQL or serverroles/features installed -> error 1603 - seperate SQL and SCE Management Server

  • How do I typeset vietnamise text in Indesign CS6. Client is saying I need to use Unicode!?

    Can anyone help me. I have a word document from the client thats in vietnamise. I copied and pasted the text and used Ariel regular in CS6. the client has come back saying: Our Vietnamese translators have advised there is a problem with the font on t

  • PreparedStatement and Date inputs

    Hello, Trying to recover table rows with date columns inside from mysql, I do the following without any success : String sqlFilter = "SELECT * FROM mytable WHERE startdate>=\"?\" AND startDate<\"?\""; PreparedStatement statement = myConnection.prepar

  • MacBook Pro Retina 13 inch

    I have encountered this problem where my trackpad was unresponsive, so I decided to download the EFI firmware updates, but my information don't match the table of downloads under Retina Pro 13 inch. Boot RAM Version is MBP111.0138.B07, SMC is 2.16f58