HT203200 This error occurs at the exact moment when step 2 ends during a wifi sync. Please help?

This error occurs at the exact moment when step 2 ends during a wifi sync. Please help? Every single time I cannot find a solution

Are you running modified software on your phone? This error seems to be common if the firmware has been modified and you're trying to restore the phone again.

Similar Messages

I am transmitting data over internet and WiFi ,it's working fine with internet but when I choose WiFi for data transmission data is not being transmitted. What may be the possible issues of data transmission failure over WiFi? Please help me.

I am transmitting data over internet and WiFi ,it's working fine with Internet but when I choose WiFi for data transmission data is not being transmitted. What may be the possible issues of data transmission failure over WiFi? Please help me....
Thanks in Advance.
Neeraj@iDev

After a week's worth of debugging, I found the issue.
The Java type returned from the call was defined as ArrayList. Changing it to List resolved the problem.
I'm not sure why ArrayList isn't a valid return type, I've been looking at the Adobe docs, and still can't see why this isn't valid. And, why it works in Debug mode and not in Release build is even stranger. Maybe someone can shed some light on the logic here to me.

I have itunee 11 and iphone 4 and i can't sync my apps to the iphone. it just stops on "determining apps to sync".please help

i have itunee 11 and iphone 4 and i can't sync my apps to the iphone. it just stops on "determining apps to sync".please help

it is an itouch, i buy apps from the app store, they are purchased, they show up in my app section but when i try to sync them to my itouch they do not show up in on the itouch. i have tried to atuthorize and deauthorize the computer also few times, rebooted computer and still nothing. when i restore the firmware and have everything reinstall all over again the apps music and such, all show up. however if i buy a new app and try to sync it with the itouch it does not show up despite the fact that the computer states 'installing "......" whatever app. it happens with numerous apps, there is no rhyme and reason to why certain apps just do not show up on the itouch. the authorize/deauthorize deal does nothing to rectify the situtaion. any other ideas ?

HT1386 my iphone does not sync with itunes on my second authorized computer, please help. i changed the first authorized computer in May 2012 and have been using the second authorized computer since then but it cannot sync - please help!!

my iphone does not sync with itunes on my second authorized computer, please help. i changed the first authorized computer in May 2012 and have been using the second authorized computer since then but it cannot sync - please help!!

"I was thinking I would just connect my iPhone and all of my music and other stuff would transfer to the new computer. "
Not true. The music and pic sync is one way - computer to iphone. The only exception is itunes purchases. Without syncing: File>Transfer Purchases
You really should transfer everything from the old computer, or your backup copy of your computer. Since you do not have access to the old computer, then use your backup copy of the old computer.
If for some reason you have failed to maintain a backup copy of your computer ( not good), then you would have to transfer itunes purchased as described earlier. Any other itunes content would be lost.
You can e-mail photo library pics to yourself, but they will not be of the original quality.
Before syncing, enter at least one unique contact and calendar entry on the computer. When you first sync, then you should get the option to merge the data.

An error occurred in the source system when running infopackage

Hello,
I am using 0CO_PC_PCP_03 (Product Cost Planning: Itemizations Costing) and cube 0COPC_C10 (Exploded Itemization) in BI. RSA3 extractor checker shows that there is data if you put in a period.But as soon as I run the infopackage I get error    :
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Service API .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
And i did put in the period in the internal formatfor FROM and TO in the selection tab on the infopakand but I am still getting the same error.
And when i go into details it gives me " Error occurred in the data selection "
Please assist
Thanks

I followed what you & Tarun advised and it shows the job as finished.Also this is what the log read:
Date        Time      Message
04/03/2009 12:49:29 Job started
04/03/2009 12:49:29 Step 001 started (program SBIE0001, variant &0000000000160, user ID DEVERP100)
04/03/2009 12:49:29 Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)
04/03/2009 12:49:29 DATASOURCE = 0CO_PC_PCP_03
04/03/2009 12:49:29 RLOGSYS    = DEVBI100
04/03/2009 12:49:29 REQUNR     = REQU_4DCA7N474P53QS8FJQ0RAKOW5
04/03/2009 12:49:29 UPDMODE    = F
04/03/2009 12:49:29 LANGUAGES = *
04/03/2009 12:49:29 *************************************************************************
04/03/2009 12:49:29 *          Current Values for Selected Profile Parameters               *
04/03/2009 12:49:29 *************************************************************************
04/03/2009 12:49:29 * abap/heap_area_nondia......... 2000683008                              *
04/03/2009 12:49:29 * abap/heap_area_total.......... 2000683008                              *
04/03/2009 12:49:29 * abap/heaplimit................ 40894464                                *
04/03/2009 12:49:29 * zcsa/installed_languages...... 1NEFDIJLPS                              *
04/03/2009 12:49:29 * zcsa/system_language.......... E                                       *
04/03/2009 12:49:29 * ztta/max_memreq_MB............ 2047                                    *
04/03/2009 12:49:29 * ztta/roll_area................ 3000320                                 *
04/03/2009 12:49:29 * ztta/roll_extension........... 2000683008                              *
04/03/2009 12:49:29 *************************************************************************
04/03/2009 12:49:29 Synchronized transmission of info IDoc 3 (1 parallel tasks)
04/03/2009 12:49:29 IDOC: Info IDoc 3, IDoc No. 6812, Duration 00:00:00
04/03/2009 12:49:29 IDoc: Start = 04/03/2009 12:49:29, End = 04/03/2009 12:49:29
04/03/2009 12:49:29 Job finished

I have installed firefox and now have the icon but when i double click on ,nothing happens, please help

I am trying to change web browser from internet explorer to firefox, I have downloaded firefox but I am not able to use the icon . Nothing happens when I click on to use it. please help.

In case you haven't solved this by now...
Sometimes your security software will block new programs from accessing the internet. Are you getting any alerts along those lines?
Sometimes Firefox will stall during startup and never display its window. In that case, you may need to manually "kill" the firefox.exe process using the Windows Task Manager before trying to start Firefox again.
You can display the Task Manager by pressing Ctrl+Alt+Esc. Windows 8.1 has a different display than Windows 7, so I have to go by memory. If you see a tab named Applications, check that one first. Then check Processes, and finally check Details. If you find Firefox or firefox.exe on any of those tabs, select it and End Process (or other action to shut it down).
After you are done with the Task Manager, try starting Firefox up again.
See also: [[Firefox won't start - find solutions]]

Error 1031 occurred at Open VI Reference in. This error occured in the ni5640R Template Config ADC (FPGA).vi

When I tried to open the ni5640R Template (FPGA).vi I got this error
Message Edited by 09441213131 on 05-23-2009 02:42 AM
Attachments:
error.JPG ‏135 KB

Most likely, you did not include the required libraries in your build script. When building an executable in which you use the Report Generation Toolkit, you must include the _Word Dynamic VIs.vi from _wordsub.llb and _Excel Dynamic VIs.vi from _exclsub.llb as dynamic VIs on the Source Files tab.
Check this article for more info.
http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/86256a47004e16d186256a84004cb883?OpenDocument
Daniel L. Press
PrimeTest Corp.
www.primetest.com

HT201210 I have just downloaded ios7 and have lost my iMessages it keeps asking me to sign in which aim doing then says cannot sign it network connection error try again later even though I have full gone and wifi signals please help

I have just downloaded ios7 and have lost all use of my iMessage I have reset all my settings but still nothing. I have entered my apple ID as requested but keep getting a message saying cannot sign in network connection error try again later even though I have full phone and wifi signals. Please help

Hello JD_NINJA,
Thanks for using Apple Support Communities.
Error 9006 when restoring your iOS device indicates that there is security software on your computer which is preventing connection to the Apple server or your device. To troubleshoot this issue please follow the directions below.
Check your security software
Related errors: 2, 4, 6, 9, 1611, 9006. Sometimes security software can stop your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't blocking a connection to the Apple servers.
Get help with iOS update and restore errors - Apple Support
When restoring your iPhone, please make sure to follow the directions in the link below to properly restore.
Restore your device from an iCloud or iTunes backup - Apple Support
Take care,
Alex H.

Error occurred at the 7 of 15 step of Microsoft Exchange Server 2013

Hi all to every techies ....
I'm a new to exchange server 2013 , I tried to install exchange server 2013 on windows server 2012 but couldn't get the success , It stops either 7 or 8 step of 15 , I tried to google it out but can not getting any progress , I tried to remove it , I deleted
by using ADSI Edit then I removed from the IIS then I delete the Microsoft folder from the Installed directory , and also I removed it from the registry editor as well , Thing thing is pulling my hair out my scalp , Any related help highly appreciated ,
The registry key (pickup / transport) doesn't exist in specified registry location , (i.e HKEYLM_SOFTWARE_MICROSOFT_EXCHANGESERVER
Thank you all
Neil Patric

Hi,
To understand more about the issue, I’d like to confirm the detail error when the installation failed.
As far as I know, deployment of an Exchange Server 2013 server goes through three main stages.
1. Preparing Active Directory (if you are installing Exchange Server 2013 for the first time)
2. Installing the Exchange Server 2013 pre-requisites on the server
3. Running Exchange Server 2013 setup
For more information, you can refer to the following article:
http://exchangeserverpro.com/how-to-install-exchange-server-2013/
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
Best regards,
Angela Shi
TechNet Community Support

I migrated from a Windows 7 PC to a MacBook Pro sometime ago, and since then whenever I try to sync my iPhone I keep getting this error -54, and I haven't found a fix for it anywhere! Please help guys

I sincerely have no idea of what to do and I have been reseaching for a while now!

There you go guys, if this is useful for something...

"An error occured saving the ActiveX control"

I pulled up an old LabVIEW program today
that I used to work on under Win-NT.
Now I use Win-XP.
We're talking about LabVIEW 5.1.1 on this program.
The program suddenly throws
"An error occured saving the ActiveX control"
when I try to save the program.
Never saw this under NT.
Anybody knows what this is about ?
Martin

Thanks for posting but we need more information.
Do you have activeX controls in the VI? Are you using 3d graphs? Does the VI run on XP? What version of LabVIEW do you have?

Process chains-Error occurred in the data selection-DBIF_RSQL_TABLE_UNKNOWN

Hi All,
The problem occurred in PC which was running smooth until now
Now I am getting message:
in BI : Error occurred in the data selection
When I went in R/3 it shows DBIF_RSQL_TABLE_UNKNOWN
Probably the only way to eliminate the error is to correct the program.
Please check the entries in the system log (Transaction SM21).
Internal call code.........: "[RSQL/READ/PA0009 ]"
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
DBIF_RSQL_TABLE_UNKN
SAPLXRSA" or "ZXRSAU
EXIT_SAPLRSAP_002"
Can anyone explain..

Hi ,
Check note 950317.
also check the blow forum having same kind of discussion :
Runtime Errors DBIF_RSQL_TABLE_UNKNOWN
Short dump error DBIF_RSQL_TABLE_UNKNOWN
DBIF_RSQL_TABLE_UNKNOWN
thanks,
Deepak

I am using report generation toolkit 1.1 with Labview 7.0 and Office 2003 professional. The create new report VI opens Excel but throws error (-2147167262- from automation open VI) when I try to open MS word. please help...

I am using report generation toolkit 1.1 with Labview 7.0 and Office 2003 professional. The create new report VI opens Excel but throws error (-2147167262- from automation open VI) when I try to open MS word. please help...

Hi Leo22,
Does this error occur if you use any of the example programs that come shipped with LabVIEW? I would try opening one of the examples that write data to Word and see if those give you an error. Also, have you tried just putting down a New Report.VI and change the report type to Word? If this simple vi (that's all you need to open Word) breaks, I would check to see if there are any instances of Word still open. Check the task manager to see if any word processes are still open. There should not be a problem accessing Word 2003 from LabVIEW 7.0. If neither of these solutions work, please give some more detail about your application and we can research further. Thanks!
Jeremy L.
National Instruments
Jeremy L.
National Instruments

SSRS 2008R2 Error: An error occurred within the report server database. This may be due to a connection failure, timeout or low disk condition within the database

Hi,
a big problem with our report server has appeared suddenly.
We are running the SQL Server 2008 R2 with a Report Server. But a .
I can connect to the Report Server Website and I can choose a report. But if I run the report, it will load endless without timeout message or other error messages.
I looked in the Report Server Log and find out this confusing error messages:
rshost!rshost!1680!01/21/2014-16:22:41:: e ERROR: WriteCallback(): failed to write in write callback.
rshost!rshost!1680!01/21/2014-16:22:41:: e ERROR: Failed with win32 error 0x0079, pipeline=0x00000000004ED8D0.
rshost!rshost!c20!01/21/2014-16:22:41:: e ERROR: HttpPipelineCallback::SendResponse(): failed async writing response.
rshost!rshost!c20!01/21/2014-16:22:41:: e ERROR: Failed with win32 error 0x0079, pipeline=0x00000000004ED8D0.
rshost!rshost!1680!01/21/2014-16:22:41:: v VERBOSE: HttpPipeline::DisconnectCallback: releasing pipeline=0x00000000004ED8D0.
httpruntime!ReportManager_0-1!c20!01/21/2014-16:22:41:: e ERROR: Failed in BaseWorkerRequest::SendHttpResponse(bool), exception=System.Runtime.InteropServices.COMException (0x80070079): The semaphore timeout period has expired. (Exception from HRESULT: 0x80070079)
at Microsoft.ReportingServices.HostingInterfaces.IRsHttpPipeline.SendResponse(Void* response, Boolean finalWrite, Boolean closeConn)
at ReportingServicesHttpRuntime.BaseWorkerRequest.SendHttpResponse(Boolean finalFlush)
library!ReportManager_0-1!c20!01/21/2014-16:22:41:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerHttpRuntimeInternalException: RsWorkerRequest::FlushResponse., Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerHttpRuntimeInternalException:
An internal or system error occurred in the HTTP Runtime object for application domain ReportManager_MSSQLSERVER_0-1-130347907277948893. ---> System.Runtime.InteropServices.COMException (0x80070079): The semaphore timeout period has expired. (Exception
from HRESULT: 0x80070079)
at ReportingServicesHttpRuntime.BaseWorkerRequest.SendHttpResponse(Boolean finalFlush)
at ReportingServicesHttpRuntime.RsWorkerRequest.FlushResponse(Boolean finalFlush)
--- End of inner exception stack trace ---;
httpruntime!ReportManager_0-1!c20!01/21/2014-16:22:41:: e ERROR: Failed in BaseWorkerRequest::SendHttpResponse(bool), exception=System.Runtime.InteropServices.COMException (0x80070079): The semaphore timeout period has expired. (Exception from HRESULT: 0x80070079)
at Microsoft.ReportingServices.HostingInterfaces.IRsHttpPipeline.SendResponse(Void* response, Boolean finalWrite, Boolean closeConn)
at ReportingServicesHttpRuntime.BaseWorkerRequest.SendHttpResponse(Boolean finalFlush)
library!ReportManager_0-1!c20!01/21/2014-16:22:41:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerHttpRuntimeInternalException: RsWorkerRequest::FlushResponse., Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerHttpRuntimeInternalException:
An internal or system error occurred in the HTTP Runtime object for application domain ReportManager_MSSQLSERVER_0-1-130347907277948893. ---> System.Runtime.InteropServices.COMException (0x80070079): The semaphore timeout period has expired. (Exception
from HRESULT: 0x80070079)
at ReportingServicesHttpRuntime.BaseWorkerRequest.SendHttpResponse(Boolean finalFlush)
at ReportingServicesHttpRuntime.RsWorkerRequest.FlushResponse(Boolean finalFlush)
--- End of inner exception stack trace ---;
The last think I have done, is to grant a new user access to the report server website (by using the site options) and to the root folder (by using the folder options on ws).
But the error must not relate to the new user. The server was not touched for several days before.
Could you plz help me? I have no idea what to do.
Googling the whole day to find a solution without success

We are having the same issue with our production reporting server and it doesn't look like a permission issue. We are running the SSRS service as a domain account with administrative privileges on the server. We are seeing the following entry in the log
file:
rshost!rshost!1254!01/30/2014-13:06:04:: e ERROR: WriteCallback(): failed to write in write callback.
rshost!rshost!1254!01/30/2014-13:06:04:: e ERROR: Failed with win32 error 0x0079, pipeline=0x0000000003484370.
rshost!rshost!1198!01/30/2014-13:06:04:: e ERROR: HttpPipelineCallback::SendResponse(): failed async writing response.
rshost!rshost!1198!01/30/2014-13:06:04:: e ERROR: Failed with win32 error 0x0079, pipeline=0x0000000003484370.
httpruntime!ReportManager_0-1!1198!01/30/2014-13:06:04:: e ERROR: Failed in BaseWorkerRequest::SendHttpResponse(bool), exception=System.Runtime.InteropServices.COMException (0x80070079): The semaphore timeout period has expired. (Exception from HRESULT: 0x80070079)
at Microsoft.ReportingServices.HostingInterfaces.IRsHttpPipeline.SendResponse(Void* response, Boolean finalWrite, Boolean closeConn)
at ReportingServicesHttpRuntime.BaseWorkerRequest.SendHttpResponse(Boolean finalFlush)
library!ReportManager_0-1!1198!01/30/2014-13:06:04:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerHttpRuntimeInternalException: RsWorkerRequest::FlushResponse., Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerHttpRuntimeInternalException:
An internal or system error occurred in the HTTP Runtime object for application domain ReportManager_0-1-130355206125382999. ---> System.Runtime.InteropServices.COMException (0x80070079): The semaphore timeout period has expired. (Exception from HRESULT:
0x80070079)
at ReportingServicesHttpRuntime.BaseWorkerRequest.SendHttpResponse(Boolean finalFlush)
at ReportingServicesHttpRuntime.RsWorkerRequest.FlushResponse(Boolean finalFlush)
SSRS version is 10.50.4270.0
Regards,
Augustine.

Windows vista home premium service pack 2.error measage __(the windows installer service could not be accessed.this can occur if the windows installer is not correctly installed .contact your support personnel for assistance )no error nurber

windows vista home premium service pack 2。error measage __（the windows installer service could not be accessed.this can occur if the windows installer is not correctly installed .contact your support personnel for assistance ）no error nurber

Hi Abdallah,
According to your description, could you please post the summary and detail logs for further analysis? By default, the logs can be found in: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log.
Usually, the error occurs when the Windows Installer Service is not running or the Windows Installer registry settings are corrupted. I recommend you reset the Windows Installer Service settings in the registry and restart the Windows Installer Service,
then reinstall SQL Server 2008 R2. For more details, please review this similar
article.
Thanks,
Lydia Zhang

HT203200 This error occurs at the exact moment when step 2 ends during a wifi sync. Please help?

Similar Messages

Maybe you are looking for