HT203242 itunes will play a prerecorded CD but ejects a blank CD when I press "Burn" to burn a playlist to the blank CD. Any ideas please?
Itunes will play a prerecorded CD, but when I attempt to burn a playlist to a blank CD the CD is ejected. Any thoughts please?
Reboot your computer and then try again.
Similar Messages
-
I am using Numbers app for the ipad and it has been working absolutely fine but now, when I want to email a spreadsheet as a PDF via the 'share and print' option, the file now doesn't appear as an attachment to the recipient. Any ideas please?
Hi mafiose15,
Thanks for visiting Apple Support Communities.
Restoring your iPod to factory settings is the best way to try and get it back to working order. You can use the instructions below to restore it:
How to restore iPod
Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
Download and install the latest version of iTunes if necessary.
Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
After a few moments, your iPod will appear in the Source panel in iTunes.
Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
Click Restore.
If you are using a Mac, you will be asked to enter an administrator’s name and password.
A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
Leave iPod connected to computer to complete restore (typically applies newer iPod models).
During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
You can find the instructions in this article:
Restoring iPod to factory settings
http://support.apple.com/kb/ht1339
All the best,
Jeremy -
I have an apple certified refurbished iPod touch 3rd generatio. When playing the music with headphones, the music moves from song to song. When it is on a docking station, it repeats the song. Any ideas why or how to fix it?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
My iphone will not power on. I have handled it very carefully. I checked my message on it in the morning. Any ideas?thank you
It worked!!! Thank you so much
helpful advice. But why does this happen? -
Hello I use a macbook pro with OSX 10.9.5. I am trying to download Flash player but keep getting this message "Install Adobe Flashplayer" is damaged and can't be opened.You should eject the disk image.Any ideas please?
You should make sure you do a complete uninstall of the flash player first and then install the latest FP14 version from this link - Use http://download.macromedia.com/pub/flashplayer/current/support/install_flash_player_osx.dm g
In order to do a complete uninstall - Uninstall Flash Player | Mac OS -
For some reason, photos taken on my iPhone did not transfer to my iPad. Apple could not help. So I have now loaded the photos from my iPhone onto my laptop, but still cannot transfer them to the iPad. Any ideas please?
I just had this problem as well and spent quite a bit of time reviewing all of the suggestions/ideas/comments, and since I am not that tech-savy I remembered this "suggestion" from the UK show The "IT Crowd" which was "Have you tried turning it off and on again??" (both devices)
http://bit.ly/18qL7OA (apologies for short ad on the youtube clip)
It worked!! -
I have a network of 9 macs that connect via ethernet and a router. All of a sudden one of the macs cannot be connected to. It can connect to all others and the internet, but no one can connect to that one. I have appletalk active and file sharing on, but everytime someone tries to connect to it, it is not on the network. Additionally, the personal file sharing keeps turning off even though I have it locked. Any ideas?
Hi orangekay
not sure where you got the idea that I have
bizarre encrypted filesystem plugins and scripts you have manipulating them all the time
because I do not have any such running, just normal Applescripts that do tasks that could be done by hand. -
Can anyone tell me how to sync my new ipad with my keyboard as it doesn't recognise it even after I put in the code given when trying to pair it. I have tried to reboot the ipad but that didn't work either. Very frustrated. ,
It was given to me by someone that spilt a drink on it and they dried it but went and bought a new one. It finds the ipad but won't sync once I put the code in. I have looked at support etc and they recommend unsnycing from the original computer. But as I have no access for this is there any way I can reset the keyboard to pair my ipad?
Thanks -
I installed a new Canon printer several months ago that I was told by the salesman could be shared between my iMAC and HP laptop. I have successfully used the printer wirelessly from both computers, however, it gets hung up switching between the two and I'm not sure what to do to get it to be consistent. Any ideas?
You didn't state how it's connected to each computer, if it's connected through your router then it should work. If it doesn't then you need to contact Canon and ask for assistance.
-
i have just switched from a PC and installing my googlemail account onto my Macbook pro. I can successfully see my calendar and contacts but my mail will not connect. i get an error message - can not connect to the server. Any ideas please?
Neil,
I don't use Apple's Mail client (I use MS Outlook) but setting up your Gmail account should be fairly straightforward. Just make certain that you have your settings correct.
For your incoming server, be sure to use the "map.gmail.com" server, using SSL, using port "993" (usually the default).
For your outgoing server, be sure to use the "smtp.gmail.com" server, override the default port and use port "465" and use SSL to connect and make sure that you enter your email address and password to access the SMTP server.
If you've already set up your account with these settings, you may need to Google "gmail setup apple mail" and find the Google document relating to same.
Good luck,
Clinton
MacBook Pro (15” Late 2011), OS X Yosemite 10.10, 16GB Crucial RAM, 960GB M500 Crucial SSD, 27” Apple Thunderbolt Display -
i bought an HD video off itunes, it will play on myIpad mini but not on my HD computer. When i try to download it to my Computer, it says my Computer isn't HD, but it is! and the oiption it gives me is to rebuy an SD version.......BS!!! my laptop plays HD! its a Dell XPS 1330 with HDMI.....how can i get this HD Ted movie to play on my laptop, as my mini pad has no HDMI cable to plug into my TV.
Did you manage to get it working mine disappeared after I while I managed to download it but now my laptop/iTunes won't recognise my iPhone!
-
My mix tape music will play on my laptop but not on either of my iPhones, is there a fix for this?
Let's fix this kacheson! Please back up the device and complete a restore via iTunes by following the visuals here http://vz.to/1hYsMpP Please test and keep me posted. Thank you.
TominqueBo_VZW
Follow us on Twitter @VZWSupport -
My iphone contacts are not updating to Icloud or Outlook, I can create a contact in Icloud/Outlook and it will update to my Iphone but I cannot create a contact on my Iphone to have it update in the Cloud/Outlook, I am using Itunes as the bridge. I originally installed the Icloud manager to sync my contacts to Cloud/Outlook, but I did not like the functionality, when I uninstalled the Cloud manager and and installed Itunes I noticed that the none of my contacts in the phone updated to Outlook.
Thanks in advance.Hi Cyclops12,
Welcome to the Support Communities!
The article below may be able to help you with this.
iCloud: Troubleshooting iCloud Contacts
http://support.apple.com/kb/ts3998
Cheers,
- Judy -
I have my home movies on DVD burned from Windows and am trying to import them into iMovie. The DVD will play on my Mac but I can't seem to import the movie. Can anyone help?
See my post here for how to do this.
-
On my Mac (vers 10.7.5) I use Disk Utilites to burn a DVD. The DVD won't play on my Mac but will play on my Windows PC and on a DVD player. A DVD created on my PC will play on the Mac. Any ideas why this is happening?
I used iDVD to create an IMG file
You created the video DVD, the IMG file, with iDVD and just burned it with Disk Utility. As Klaus1 pointed out Disk Utility can't create video DVDs.
OT
Maybe you are looking for
-
Output Type not automatically determined at invoice creation
Hi Friends, I am facing a problem that while i am generating the invoice for a particular billing document type, the output type is not automatically being determined. Instead, I have to go into the invoice in change mode (VF02) Header>Output and ass
-
Does the CC single membership give you access to both Windows and OS environments?
I am an student that recently got an iMac which will be used with both Windows and OS (each partition booted separately)... I need to know if once I enroll to a CC membership (student or single) I will be able to download desktops applications on bot
-
How to install JDK6 and Netbeans 6 in a non-global zone?
Hi, I have a Solaris system where I want to deploy separate containers for several developers. I'm having difficulty in installing JDK 6 and Netbeans 6, I get lots of missing package errors in non-global zone. What would be the best approach for inst
-
Why can't I change line weight to less than 1pt?
Suddenly, I am no longer able to make a line .25pt or .5pt. I can go thicker but not thinner than 1pt. What gives? I'm working in CC.
-
DAO in Websphere calling Oracle SP with array input params
Hi, We have a complex Oracle stored procedure which gets called by the DAO in Websphere 5.1. The stored procedure takes couple of input array. Code snippet - CallableStatement cstmt = con.prepareCall("{call pkg_name.ap_name( ?,?,?,?,?,?,?,?,? )}"); A