HT203261 when i use any messaging app and apply any icon on the emoji keyboard, the messenger app crashes/exits to the home page.
i encountered an issue with using the emoji keyboard. every time i am using a messenger app and insert an icon in the messaging bar, the app crashes/exits back to the home page. what can be causing this?
oops, fount the solution in this thread:
https://discussions.apple.com/message/23707673#23707673
Similar Messages
-
When I use Preview,Photo Mechanic and Pages, all JPEG or RAW images appear corrupted.
I thought my hard drive was failing and replaced it and migrated everything over but the problem still exists.
It felt as if maybe a virus was at work but I ran Sophos and found nothing.
I store images on my Drobo Raid system but when I work from my Macbook Pro I have no issues, just on the tower.
Any idea what is going on?First of all, why did you say yes to Nero Back up before researching what it does with files already on the HDD? When I install Nero, the Back Up is the first thing I disable, it is a nagging pain, there are much better backup programs available. There are several file recovery programs out there to recover deleted files, that is, if that is what happened. Also, if you haven't overwritten the files, so you should be able to find them.
-
My iPhone 4 with iOS 6 is making me start to hate Apple. Any App and at any time I open and I can not view it or move for more than 2 minutes, they close themselves. During connections, it also gives this problem and the signal disappears after a few seconds back but often the person on the other end has hung up ... I can not stand it anymore, someone suggests something?
Besides these problems, there is the battery, which was bad got worse, she is not lasting more than 10 hours, even without using the phone.
Sometimes it even seems that the problem was solved, but my joy did not last long after I celebrate all the problems return, is incredible ...
thanks.
Sorry my bad Inglês.Try a reset hold home/sleep buttons until Apple logo appears
If that does not improve try a restore
http://support.apple.com/kb/HT4137
For your information
We are NOT Apple here we are all users helping other users
so emotion is ignored -
We have always used one iTunes account and I want to crate a new account for my daughter. What is the best way to go about this and will she need to download free apps again?
Not going to happen the way you want it to.
When you add a gift card balance to the Apple ID, it's available for the Apple ID.
Probably best to create unique Apple ID's for each... this will also make things easier in the future as purchases are eternally tied to the Apple ID they were purchased with. -
Just bought a 2tb external hard drive with the intention of moving my iPhoto data files to it. I have so much of my 500 gigs being used up by images and video. Questions: Will this foul up my iPhoto app?
Do I need to point iPhoto to this new location?
Thanks!Are you running a Managed or a Referenced Library?
A Managed Library, is the default setting, and iPhoto copies files into the iPhoto Library when Importing. The files are then stored in the Library package
A Referenced Library is when iPhoto is NOT copying the files into the iPhoto Library when importing because you made a change at iPhoto -> Preferences -> Advanced. (You unchecked the option to copy files into the Library on import) The files are then stored where ever you put them and not in the Library package. In this scenario you are responsible for the File Management.
Assuming a Managed Library:
Make sure the drive is formatted Mac OS Extended (Journaled)
1. Quit iPhoto
2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
Regards
TD -
my photos are not printing right with adobe manages color but works when i use printer manages color. never had any issues untill a week ago.
We use CS6, yes we calibrate using x-rite. I have always had adobe manage colors when printing. This problem just occurred, all my settings are the same as they have been for years. The only thing we did lately is do an update to CS6. We thought it might be our printer but when we use the printer manages color it works fine, The problem with adobe manages color is it is not blending the light highlights like on top of the cheeks with the colors around the cheeks and its putting a faint red between the two it just does not have a smooth transition. I printed a photo that I had printed 4 months ago with no issue, and this time it had the issue that I am dealing with now. Somehow the photo shop manages color is not getting the right info to my printer.
I set paper type
set quality
no color adjustment
set my profile
Teri -
*when we use at user -command and give smaple code fro at user-command*
Hi experts,
i am new to abap can any body tell me when we use AT USER-COMMAND and give a sample code for that.
point will be rewarded.
thanks.Hi,
AT USER-COMMAND is a list Event.This Event is triggered when user make an action on the Application Toolber Or Menubar.
Here is the Program.
START-OF-SELECTION.
SET PF-STATUS 'TEST'.
WRITE: 'Basic list, SY-LSIND =', sy-lsind.
AT LINE-SELECTION.
WRITE: 'LINE-SELECTION, SY-LSIND =', sy-lsind.
AT USER-COMMAND.
CASE sy-ucomm.
WHEN 'TEST'.
WRITE: 'TEST, SY-LSIND =', sy-lsind.
ENDCASE.
This program uses a status TEST, defined in the Menu Painter.
Function key F5 has the function code TEST and the text Test for demo.
Function code TEST is entered in the List menu.
The function codes PICK and TEST are assigned to pushbuttons.
The user can trigger the AT USER-COMMAND event either by pressing F5 , or by choosing List -> Test for demo, or by choosing the pushbutton 'Test for demo'.The user can trigger the AT LINE-SELECTION event by selecting a line.
Hopr This Will help You.
Regards,
Sujit -
Hy ,
My mac pro (SL 10.6.8) wakes up every minutes when I use wake on lan and I share one of my Hard Drive.
When I unplug the ethernet cable it doesn't wake any more so I suppose that some thing wakes it up on my network ( 1 printer canon MP620, 2 mac books, 2 iPads, 2 IPhones and 2 time capsules !) ...even when all these devices are "sleeping"
Any idea?
THKS
Phil
PS .: I'm french so my english is probably quite strange ! ... Sorry for thatSorry - posted this in the wrong forum. Reposted in Mac Pro.
-
I am trying to use a Logitech USB headset to record with screencast o matic. In the sound file of system preferences the headset is recording audio. However it stops working when I use screen cast o matic. Any advice?
See these threads for some possible solutions:
Bluetooth and 10.7
Bluetooth speaker error -
Bought Lion online, downloaded, when finished an error message appeared and 3,7GB vanished... Anyone with a similar experience???
All I know is that once it is installed it is erased, the Lion Installer is erased from the applications folder.
You won't have to pay for it again if you have to download again. Remember to move it out of the applications folder, then you can trash it when you are ready or even burn a startup DVD.
My knowledge comes from two e-books you can get here
http://www.takecontrolbooks.com/lion-upgrading
and the one about using lion.
Good luck -
Question:
I can not read any contents in my yahoo inbox messages? It is blank when i opened my message. Are there any setting or updated that i missed? Please give me some advices? Thank you. PhuongHi AM_Kidd.
Thanks for your reply.
I have done a complete uninstall and re install of iTunes and all related apple programs from my laptop through control panel, add remove programs and also by going through program files and deleting all tracers of any left over folders remove programs may have missed.
My apologies for forgetting to add this in my original post.
Thanks again -
Satellite Pro 4600: When I use WEP, I can't make any connection anymore
Hey everybody,
When I connect my Tohsiba Satellite Pro 4600 via the build-in wireless network card without WEP to an AP, there is no problem, connection is establische and everything is working fine.
When I use WEP, I can't make any connection anymore.
Is there a solution to use 128 Bit WEP encryption on a Thosiba Pro 4600 laptop with the build-in WLAN.
Thanks in advanced
PokettukWhat WLan card do you use?
As far as I know the notebook should be equipped with the Wireless LAN / WiFi Standard: 802.11b ORiNOCO Mini PCI card.
This card supports security 64 WEP or 128 RC4.
Everything looks like you WLan card doesnt support the same security standard like your WLan router. You should understand that this WLan card is an oldie about 7 years old.
I think the best solution is to use the external USB WLan stick which would support the newest encryption standards
Bye -
Just installed Lion (10.7.3) , but when i use "find" it can't find any files
Just installed Lion (10.7.3) , but when i use "find" it can't find any files, comes with with "filename contains" but then when you press enter nothing happens.
Hi..
Open System Preferences > Security & Privacy > Firewall
Make sure the Firewall is turned off. You may need to click the gold lock icon to make changes.
Using FaceTime behind a firewall
Apple - Support - FaceTime -
There were no results for I've downloaded the kindle app to my new iPad4 but when I went to Amazon UK and tried to download a book it said "this mobile app does not currently support digital downloads. I don't understand! I was told you could download kindle books from amazon straight to iPad if you download the kindle app first. Do I have to do it onto my computer and then sync it onto iPad? surely not?
Can you go here:
http://www.amazon.co.uk/Kindle-eBooks/b/ref=amb_link_173148087_8?ie=UTF8&nav_sdd =aps&node=341689031&pf_rd_m=A3P5ROKL5A1OLE&pf_rd_s=center-1&pf_rd_r=1GDPPW8ZCN9Y 9NQF5VV0&pf_rd_t=101&pf_rd_p=365751407&pf_rd_i=468294
and not log on. See what you can do. -
Benefits/ Limitations when we use SAP HANA Extended and Standard products.
Hi All,
We are going to purchase SAP HANA media. Please let me know what are the benefits/ limitations when we use SAP HANA Extended and Standard products.
Thanks in Advance,
VishallHello,
please check Master Guide (page 9 - chapter 1.6 Software Components)
https://service.sap.com/~sapidb/011000358700000604552011
There you can find edition comparison and detailed description.
To extract the short summary:
Platform edition = SAP HANA Database + Studio + Client + Host Agent + Information Composer
Enterprise edition = (Platform edition) + LT Replication Add-on (SLT) + LT Replication Server (SLT) + SAP BO Data Services
Enterprise extended edition = (Enterprise edition) + Sybase Adaptive Server Enterprise + Sybase Replication Server + Sybase Replication Server Agent + SAP HANA load controller
It depends on what licenses you already have and how do you intends to use HANA.
Platform edition = ETL via BO Data Services (you already have license for BO Data Services)
Enterprise edition = SLT and/or BO Data Services (including licenses)
Enterprise extended edition = all replication technologies
Tomas
Maybe you are looking for
-
My firefox program is regularly updated (automatic update). Normally, after an update, when I start up firefox the "welcome to firefox" (http://www.mozilla.org/en-US/firefox/6.0.2/whatsnew/) with all the new features and stuff display pops up, but on
-
How could I hook my MacBook Pro to my Samsung LCD TV??
I'm using a Mini DisplayPort to HDMI Adapter hooked to an HDMI cable which is hooked to the TV. nothing is showing. How to go from there?
-
Cannot connect iPad Air to VGA Monitor
Hi, I received n Ipad Air for Christmas so gave away my old gen 1 Ipad, now I am beginning to wish I hadnt as there are so many problems! One I am trying to resolve right now is very iportan as I have aconference to attend and need to connect the ipa
-
How to use Filter/Responsewrapper to trap http response
My application deals with various request/responses. How do i write a Responsewrapper or responseoutputstream to trap the contents of the response in a file without fiddling with the actual servletoutputstream, which is thrown back to the browser as
-
Error Converting "1,300" to Float using Float.parseFloat()
I need to convert a string in the format xx,xxx.00 to a float value. But I get java.lang.NumberFormatException by using Float.parseFloat("xx,xxx.00") What can I do?