HT203477 Error - 50 in Final Cut Pro X - HELP!

I feel like I've tried everything. On one project (and every one I duplicate from it) when I try to export to anywhere I get Quicktime error - 50. I can't find the problem. Please hepl!

Check that you do not have any corrupt clip in your timeline and you are using compatible Codecs.
This link may help you further too.

Similar Messages

  • Error 29 using final cut pro X ?

    How to burn a DVD in Final Cut Pro X ? I keep getting error code -29 .

    This has been reported here a few times.
    The solution in this thread may (or may not) apply to your project.
    Russ

  • Error 50 in Final Cut Pro X 10.0.9

    Hi Everyone,
    I am trying to export a video in Final Cut Pro X 10.0.9.  This is the first project that i have tried to export since i upgraded from 10.0.5 and the project was started in 10.0.5
    Every time i try to export the video wether it be as a master file or as apple file to itunes it stops after about 30 minutes and comes up with a message saying error 50.
    Can anyone shed any light on this i am in desperate need of your help.
    Thanks
    Andy
    PS I am using the new Maverick Operating Sytem

    WOW its worked!!
    Gents i cant thank you enough for your help in this!!!!!
    If you are ever in the UK it would be my pleasure to buy you a drink!!!
    Thank you sooooooo much
    Andy

  • Error when downloading Final Cut Pro 10.1.3

    My specs
    When I first got his MacBook about a month ago, I was still using Mavericks. I bought Final Cut Pro and it downloaded just fine. I upgraded to Yosemite shortly after it became available.
    I found soon after that supplemental updates for FCP were hard to install properly (I would press the Install button, it would say Installing then go back as if nothing had happened). After consulting a few articles, I decided the best to do was to delete FCP and re-install it.
    I consulted this article, which explains how to thoroughly uninstall FCP on Mavericks Final Cut Pro X 10.1: How to remove and reinstall Final Cut Pro X - Apple Support and followed its directions. Then I restarted my computer.
    When I try to download and reinstall FCP from the Purchases section of the App Store, I watch the download bar reach 2.28 GB (full download) then receive an error message.
    This is what I'm left with:
    I've done this a few times. I'm not sure what the problem is. Any suggestions?

    This is what's in my Applications folder:
    I've seen this several times also. I'm stumped.

  • Getting error message in Final Cut Pro X for frame 13142 when sharing

    I am sharing a project to Master File and I get an error message: error occured when creating frame 13142.  How can I find that frame?

    I had frame generation error last nigtht trying to make master file  on a short 5 mintue simple video I built. 
    It said error was on frame 6797.
    I seach for soluitons and nothing seem to help.
    I tried copying project contents to new project and that still failed with frame error 6797.
    I then reviewed that frame and it was the one time in project I used any special affects for movement of image, Ken Burns and  Key frame transform affects on a freeze frame image.
    I createa new third project copied contents in and remove the freeze frame image.  added freeze frame image back into project and only did Ken Burnes affect without key frame movement.
    i was then able to complete geneeation and share project.
    So if you get a frame generation error check that frame and see what special affects your using.  There maybe a bug in FInal Cut Pro X when you mix and match affects on one object in a project.
    hope this helps someone... I was stuck for several hours on this last night.
    bill sanderson

  • Moving from Linux to Final Cut Pro, Need Help Creating Same Mpeg-4 videos

    I am seeking to move into Final Cut Pro to develop these types of videos that I have previously been creating in Linux.
    How can Final Cut Pro make these videos in the format specified below (OR VERY CLOSE TO IT)?
    Please let me know what settings with screenshots, etc. will make final cut pro output in this way.
    MINIMUM output requirements Video codec: Mpeg-4 (divx) with 2400 vbitrate, Audio Codec: MP3 and File container .avi
    I look forward to your help, below are the details I've used in Linux, so please help me create these videos using Final Cut Pro.
    I need this information by the end of the week.
    Thanks!
    To Convert from a captured uncompressed video to MPEG-4 (Divx) with MP3
    audio at 2400 bits using mencoder
    http://www.mplayerhq.hu/DOCS/man/en/mplayer.1.html
    mencoder -ffourcc divx capture002.avi -oac mp3lame -ovc lavc -lavcopts
    vcodec=mpeg4:vbitrate=2400:v4mv:mbd=2:trell:cmp=3:subcmp=3:mbcmp=3:autoaspect:vp ass=1
    -vf harddup -noskip -mc 0 -o test.avi
    -------------VIDEO ------------
    Video Encoded to Codec (MPEG-4) with ffourcc divx (divx4)
    Video Bitrate = 2400 (vbitrate=2400),
    Allow 4 motion vectors per macroblock (slightly better quality) (v4mv)
    Motion estimation=2 (mbd=2)
    Trellis searched quantization. This will find the optimal encoding for
    each 8x8 block. Trellis searched quantization is quite simply an optimal
    quantization in the PSNR versus bitrate sense (Assuming that there would
    be no rounding errors introduced by the IDCT, which is obviously not the
    case.). It simply finds a block for the minimum of error and lambda*bits.
    (trell)
    Sets the comparison function for full pel motion estimation (cmp=3)
    Sets the comparison function for sub pel motion estimation (subcmp=3)
    Motion Search Algorithm (mbcmp=3)
    Same as the aspect option, but automatically computes aspect, taking into
    account all the adjustments (crop/expand/scale/ etc.) made in the filter
    chain. Does not incur a performance penalty, so you can safely leave it
    always on. (autoaspect)
    Activates internal two (or more) pass mode, only specify if you wish to
    use two (or more) pass encoding. (vpass=1)
    duplicate frames (harddup)
    no skipping (-noskip)
    ------------- AUDIO ------------
    Audio Encoded to Codec (MPEG-3)
    ------------- FILE CONTAINER ------------
    File Container (.avi)
    DOCUMENTATION FOR MENCODER
    http://www.mplayerhq.hu/DOCS/man/en/mplayer.1.html#GENERAL%20ENCODING%20OPTIONS% 20(MENCODER%20ONLY)

    I need this information by the end of the week.< </div>
    Not likely.
    Easiest solution is to produce your edited material in FCP and then move the fully rendered, self-contained movie, in whatever format you are producing, to your Linux machine and use its encoder/transcoder.
    Compressor will do the job for MP3 and MP4 but you will need to purchase the DIVX codec or transport it to your Mac. You need to talk to DiVX and you need to open the manual for Compressor. Compressor is not easy to learn how to use i na day but whatever you were using on your Linux box was much more difficult to learn.
    bogiesan

  • Second hardrive / final cut pro x help

    I have imported camera footage into my Final Cut Pro X and it has automatically saved onto my Hardrive. I want to make a back up too. I've been told to make a copy to a second drive. How do I create a second drive/Split my hardrive? (I'm worried my external hardrive wont be fast enough/have enough space so assume this is the best way to do it)

    Then you need a second, bigger, faster external hard drive!

  • Slow motion in final cut pro..help!

    hey guys,
    I'm trying to do an ultra slow motion scene for a video, a pill dropping into a glass of water. i'm shooting it with a canon 7d at 60 FPS and for some reason i'm getting this awful warping...not smooth at all. i uploaded a video to show you what kind of result i was getting: http://vimeo.com/37878559
    also, i'm using twixtor...maybe there is a better alternative to accomplish this shot through final cut pro without using a 3rd party plug-in such as twixtor? please help!

    Cinema Tools.  Need to CONFORM...
    http://library.creativecow.net/ross_shane/slow-motion_cinema-tools/1

  • Final Cut Pro 7 - Help!  Can't install, with install disks

    I have been purchasing Final Cut Pro with every version.  I am with the majority that I do not like Final Cut Pro X at all.  The timeline is the worst experience as a pro user.  I was using version 7 and was happy with that.  I upgraded to a new Mac Pro and it has Lion on it.  I can't install Final Cut Pro 7.  My FCP Studio 2 disks wont load.  My FCP studio 3 upgrade disks won't install Final Cut Pro 7 because Final Cut Pro 6 is not on my computer.   Can anyone please help me? 
    Thanks

    Hi Richie,
    FCP6 needs Rosetta, do you have installed Rosetta?
    regards Markus

  • Final Cut Pro 4 Help

    Hi all--
    Hoping someone can help me out. I am looking for the DVD-Rom that comes with the Apple Pro Training Series Instruction book for Final Cut Pro 4 (Peach Pit Press). I have twice purchased this book used on Amazon and twice been burned, with no DVD-Rom being included. The DVD-Rom of course has all the media files to use in the lessons that are spelled out in the book.
    Does anyone know where I can get a copy of this DVD-Rom or perhaps even download the files?
    I really ant to get started on this book and start learning this program.
    Thanks so much for any help--
    Edgar

    Peachpit will send you the DVD's you need if you just contact them I'll wager if they have them still around... FCP 4 was a while ago... THere is no place to download the files you want I'm sure.
    Jerry
    Message was edited by: Jerry Hofmann

  • Final Cut Pro X Help intermittent at best

    "The selected topic is currently unavailable.
    To see all Final Cut Pro Help, you must be connected to the Internet."
    But I am connected to the internet.
    I can go to Apple FCPX support with a browser and get the help that way but the "Help" from within FCPX should work.

    yep it is BAD.  "Print" and save to PDF
    http://help.apple.com/finalcutpro/mac/10.0/
    Click the printer icon in the upper right corner then Save as PDF.

  • Final cut pro Crash ,help ?

    Process:         Final Cut Pro [2233]
    Path:            /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
    Identifier:      com.apple.FinalCutPro
    Version:         7.0.3 (7.0.3)
    Build Info:      FCPApp-1008261348~8
    Code Type:       X86 (Native)
    Parent Process:  launchd [362]
    Date/Time:       2012-11-24 19:10:50.887 +0800
    OS Version:      Mac OS X 10.7.5 (11G63)
    Report Version:  9
    Interval Since Last Report:          174518 sec
    Crashes Since Last Report:           6
    Per-App Interval Since Last Report:  168786 sec
    Per-App Crashes Since Last Report:   6
    Anonymous UUID:                      120CC73B-70DA-4D9A-99E3-EF9407605C2F
    Crashed Thread:  14
    Exception Type:  EXC_BAD_ACCESS (SIGBUS)
    Exception Codes: KERN_PROTECTION_FAILURE at 0x0000000000000094
    VM Regions Near 0x94:
    --> __PAGEZERO             0000000000000000-0000000000001000 [    4K] ---/--- SM=NUL  /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
        __TEXT                 0000000000001000-0000000000871000 [ 8640K] r-x/rwx SM=COW  /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
    Application Specific Information:
    objc[2233]: garbage collection is OFF

    You failed to mention what, specifically, you were doing when FCP crashed.  This app will help interpreting FCP crash logs: http://www.digitalrebellion.com/promaintenance/
    -DH

  • I cant open final cut pro x help!!!!!

    i try to open but appears that
    Process:         Final Cut Pro [572]
    Path:            /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
    Identifier:      com.apple.FinalCut
    Version:         10.0.8 (221398)
    Build Info:      ProEditor-22139008018000000~1
    App Item ID:     424389933
    App External ID: 14685451
    Code Type:       X86-64 (Native)
    Parent Process:  launchd [151]
    User ID:         501
    Date/Time:       2013-06-18 23:25:48.597 -0500
    OS Version:      Mac OS X 10.8.4 (12E55)
    Report Version:  10
    Interval Since Last Report:          2603 sec
    Crashes Since Last Report:           9
    Per-App Interval Since Last Report:  167 sec
    Per-App Crashes Since Last Report:   8
    Anonymous UUID:                      0B658486-3091-368C-2E3D-6BE674A50201
    Crashed Thread:  33  BGTask: MEBackgroundLoadManager  Dispatch queue: com.apple.root.default-priority
    Exception Type:  EXC_BAD_ACCESS (SIGSEGV)
    Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000000
    VM Regions Near 0:
    -->
        __TEXT                 0000000100000000-00000001000cc000 [  816K] r-x/rwx SM=COW  /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
    Thread 0:: Dispatch queue: com.apple.main-thread
    0   libsystem_kernel.dylib                  0x00007fff952ebffa read + 10
    1   com.apple.Foundation                    0x00007fff92e8ac73 _NSReadBytesFromFileWithExtendedAttributes + 696
    2   com.apple.Foundation                    0x00007fff92e8a9b2 _NSReadBytesFromFile + 49
    3   com.apple.Foundation                    0x00007fff92e99461 -[NSData(NSData) initWithContentsOfFile:] + 65
    4   com.apple.Foundation                    0x00007fff92ea09f7 -[NSData(NSData) initWithContentsOfURL:] + 355
    5   com.apple.Foundation                    0x00007fff92eaac3a +[NSDictionary(NSDictionary) newWithContentsOf:immutable:] + 101
    6   com.apple.Foundation                    0x00007fff92eda54e +[NSDictionary(NSDictionary) dictionaryWithContentsOfURL:] + 43
    7   com.noiseindustries.FxFactory.FxPlug          0x0000000127859ce4 0x12780c000 + 318692
    8   com.noiseindustries.FxFactory.FxPlug          0x000000012785c77d 0x12780c000 + 329597
    9   com.noiseindustries.FxFactory.FxPlug          0x000000012785c3cc 0x12780c000 + 328652
    10  com.noiseindustries.FxFactory.FxPlug          0x000000012785ab0d 0x12780c000 + 322317
    11  com.noiseindustries.FxFactory.FxPlug          0x000000012784460c 0x12780c000 + 230924
    12  com.apple.Foundation                    0x00007fff92ed05ca __NSThreadPerformPerform + 225
    13  com.apple.CoreFoundation                0x00007fff94cd2b31 __CFRUNLOOP_IS_CALLING_OUT_TO_A_SOURCE0_PERFORM_FUNCTION__ + 17
    14  com.apple.CoreFoundation                0x00007fff94cd2455 __CFRunLoopDoSources0 + 245
    15  com.apple.CoreFoundation                0x00007fff94cf57f5 __CFRunLoopRun + 789
    16  com.apple.CoreFoundation                0x00007fff94cf50e2 CFRunLoopRunSpecific + 290
    17  com.apple.HIToolbox                     0x00007fff90d16eb4 RunCurrentEventLoopInMode + 209
    18  com.apple.HIToolbox                     0x00007fff90d16b94 ReceiveNextEventCommon + 166
    19  com.apple.HIToolbox                     0x00007fff90d16ae3 BlockUntilNextEventMatchingListInMode + 62
    20  com.apple.AppKit                        0x00007fff8d699533 _DPSNextEvent + 685
    21  com.apple.AppKit                        0x00007fff8d698df2 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 128
    22  com.apple.AppKit                        0x00007fff8d6901a3 -[NSApplication run] + 517
    23  com.apple.prokit                        0x000000010032c6c5 NSProApplicationMain + 378
    24  com.apple.FinalCut                      0x0000000100001e14 start + 52
    i dont know what to do????

    Start by using Preference Manager from Digital Rebellion to trash your prefs.
    Has the application ever opened?
    What are your complete system specs and media specs?

  • HT5103 SPINNING BEACH BALL FINAL CUT PRO..HELP!

    Trying to edit a project and the spinning beach ball appears and continues to spin the second I click onto the project.  Seems so sensitive.I've deleted and clean up files etc..in disk utility, went into my osx, cleaned up there. What else can I do? Help!

    Hi!
    I have to reply to everyone out there having problems with slow Final Cut Pro X.
    Since I got my app I had so much problems. But I upgraded my Powerbook to a 2.5Ghz Intel Core i7 with an external Thunderbold drive.
    I have had no problems with anything since then.
    So my understanding is that there is nothing wrong with FCP X it self. You need a fast machine and (of course) a fast external drive.

  • Error when encoding final cut pro x project, will compressor help?

    Having a problem trying to export a FCP X project.  As it is exporting about half way through it will come up with this error message:
    The Share operation export file has failed.  Quicktime error -50
    I noticed in the project library that there is an error icon next to this project and not sure why.
    I made a duplicate project and cut it in half to see if that would work and getting the same error message.
    How can I trouble shoot this and if I purchased Compressor would that help me export this project?
    I am on a tight deadline and this has never happened before, any ideas?

    OK, you are talking to a newbie with FCP X...came from iMovie and did a number of projects with FCP X already but don't know the ins and outs of this program. If you could talk me through the steps and where to find Repair Permissions (is that using the disk utility and repairing permissions there?), Would I trash all the Render files here including the folders, will they rebuild?, Where do you turn off the background rendering?
    I should mention that I took an older project and exported it to see if it would work and it did, without a problem.  I am now making copies of this project and removing sections to see if I can isolate the corrupt files, if there are any.
    FLASH....I just found the corrupt files. The last section I removed seemed to be the issue. I tried to render it again and it worked fine.
    Now I will have to go back and see if I can narrow that section down to find the file that is causing the issue.  WOW what a mess. Is there any program that can identify these issues that doesn't cost as much as FCP?

Maybe you are looking for