HT203477 FCPX is not recognizing my project files.

When I open FCPX the raw footage is there, but none of the edited projects appear. I did an update and ever since FCPX won't locate my project files.

Hopefully zaimpaine's problem has been solved in this past month. If zampaine or anyone else could provide the solution that would be greatly appreciated. In my case, there also is no Updated Projects Event. Projects started in the last few days disappear from FCPX and the Project Library even though the project file is visible in Finder, both in the Final Cut Projects root file and within its own subfolder and all the other, older projects are still clearly visible in the Project Librarty.
Many thanks in advance,
JT
Oregon

Similar Messages

Not a recognized Help Project File

I need to address two problems which together have me 'dead
in the water'.
First, I am unable to open any RoboHelp HTML Project file.
Attempting to do so produces the following message: The file
"filename.xpj" is not a recognized Help Project file and cannot be
opened.
Second, every attempt to create a new Project produces the
following result: An Adobe RoboHelp 7 message box opens, explains
the RH7 has encountered a problem and needs to close - sorry for
the inconvenience. The 'more information' link identifies
utilities.dll as the module name - I tried registering the dll but
it has no entry point. Anyway, clicking OK crashes RH.
I've tried searching for the first condition but the forum's
search engine is down. Any help is appreciated.

This was a problem seen in an earlier version and the cause
was never really identified. However, some solutions were found and
these are in Snippets on my site.
Haven't heard of it for a while now though and certainly not
with RH7.

Trying to move my iTunes Music and other media from the main drive on my pc to an external hard drive but iTunes is not recognizing the new file location? Ideas?

Trying to move my iTunes Music and other media from the main drive on my pc to an external hard drive but iTunes is not recognizing the new file location? Ideas?

Hello there, Underwriter.
The following Knowledge Base article provides in-depth instructions on how to migrate your content to an external drive:
iTunes: How to move your music to a new computer
http://support.apple.com/kb/ht4527
Particularly of note for your situation:
External drive
This option requires more work than Home Sharing, but it creates a backup of your iTunes library on the external drive in addition to moving your content.
Notes before you start:
You can use most iPods as an external drive.
Windows operating systems don't recognize Mac OS-formatted disks (HFS or HFS Plus formats). Because of this, you can't use a Mac-formatted iPod or external drive to move your music to a Windows PC. See iPod: How to determine iPod's hard disk format if you're not sure how your iPod is formatted.
Mac OS X can read Windows-formatted iPods and drives. This means there are many ways to migrate your information from your old Windows-based PC to your new Mac.
Mac OS X: To be sure external drives appear on your desktop, choose Preferences from the Finder menu. Be sure the options for "External disks" and "Hard disks" are enabled.
Part 1: Locating and consolidating the iTunes Media folder
Part 2: Copy iTunes folder from the old computer:
Part 3: Get iTunes ready on your new computer
Part 4: Back up any music that's already on your new computer
Part 5: Copy music to your new computer
Part 6: Add preexisting music that was on the new computer back into the library
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Why is my Photoshop CS3 not recognizing my NEF file from my new Nikon D7100, but will recognize NEF's from my old Nikon D90?

Help... Why is my Photoshop CS3 not recognizing my NEF file from my new Nikon D7100, but will recognize NEF's from my old Nikon D90?

Because many of the camera makers slightly alter their versions of their raw format whenever they release a new camera model.
Nikon does it, Canon does it, and also several other camera makers.
There is not a single version of NEF that all Nikon cameras use, nor a single version of CR2 for all Canon models.
Here is a list of supported cameras and the required ACR plugin needed to open the raw files.
Camera Raw plug-in | Supported cameras
Versions of ACR are specific to each version of Photoshop.
Older versions of PS cannot use the latest version of ACR.
You need to download the latest version of Adobe DNG Converter.
This will convert your newer 7100 files to DNGs that can then be opened in older versions like CS3.
Be aware DNG only works on folders of files, not individual files. Select the FOLDER not a single file

.jpg files created on iphone 4S are not recognized as .jpg files when uploading them to American Heart Assoc. website?

.jpg files created on Iphone 4S are not recognized as .jpg files when uplaoding to American Heart Association fund raising webpage? .jpg's from Canon camera uploaded without any problems? The website automatically reduces the file size to <100kb.

I haven't contacted AHA about this issue. The .jpg files created on Canon SLR uploaded correctly, but the photo from iPhone which was emailed to my PC using MS IE. The .jpg was browsed to from my desktop and is submitted. It shows up in draft form then when uploading it fails saying it is not a .jpg file or .png file? I have had other issues in the past emailing iPhone pictures. They were not editable after being sent to a PC. I guess we can retake photos with a non-Apple camera.

I can not relink my project files.

Hello,
I have been researching this topic for over an hour and now I'm deciding to post in here. I disconnected my external hard drive on accident without turning off my computer first. Now I'm seeing what you see below. My first and urgent priority is that I relink my project files. After that, I'm going to need to relink all of my files in the library as I have lost every single one of them. Thousands of shots from a documentary to be exact. I have tried file/ relink, but FCP X is not locating my files this way. Can somebody please help me figure this one out. Thank you very much.
Trey

but FCP X is not locating my files this way
FCP will not locate the files for you if they've become unlinked. You have to point the application at the file it's looking for.

Premiere's not recognizing my avi files

I have a bunch of avi files that I made a few years ago. I can't remember what codecs were used exactly. I now have need to use this files again and do some editing to them but Premiere's not recognizing them for some reason. CS6 imports the audio but not the video and CC won't import them at all. The video's play fine off the desktop but won't work with Premiere. Anybody have any suggestions on how I might be able to get these working? Maybe recommend a program I can download to convert them? I have the entire creative cloud so there might even be another adobe program that could help me with this that I'm just not aware of.
Thanks

Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

Storage Captured DV footage in external drive not contained in Project file - How?

How do I store captured DV tape footage in an external drive without being in a Project file?

You could use another program, to do the Capture.
What is the material, that you wish to Capture?
What camera produced it?
What is your OS?
With that info, someone can likely give you a link to a program, that will work for you.
Good luck,
Hunt

Movie Clips in Event Library not Recognized By Project Library

I downloaded Photos but when working on a project in iMovie 9 my iPhoto videos were not found. However if I revert to using iPhoto I regain my ability to move selected photos into my iMovie project so for now I will simply not use Photos. However I still have a problem. The movie clips in the projects in my Project Library don't find the clips in the Event Library in the iPhoto Videos folder. I see either: "This clip's media file is not currently available" or "Source clip is missing." Is there some way to refresh iMovie? Fortunately the projects shared to iTunes are still intact.

Many who post here use Preference Manager from DIgital Rebellion to trash preferences. It's reliable and the price is right – free.
I assume you've tried different events on different drives and the no-playback problem persists.
And just out of curiosity, can you play clips in a project timeline or if you open the clip in its own time line? And does the skimmer skim?
Russ

Reviewer comments not appearing in project file

Hi there,
This is my third month of using Captivate so I'm definitely a 'newbie' here.
My team has created and sent out a handful of Captivate projects to subject-matter experts for their comments. Each .crev file was linked to the appropriate networked folder with a specific 'comments folder' also linked in.
Most of them seem to be working fine: When I open the original file and show the comments bar, the comments all appear. However, there is one that doesn't seem to want to work. The xml files of the comments from people are saved in the correct folder on the network, and when I open the .crev file, I can see the comments. However, they aren't showing up on the original file. Even when I 'import' the comments, there is a sort of page refresh, but nothing happens.
Fortunately, we haven't received tons of comments for this project yet, so one idea I had was to just do it over again. But I'm not sure what I would do differently so I don't get the same problem.
Anyone have any ideas why this might be happening and what I can do to make sure it doesn't happen again?
Thanks very much!
Bridget

Most certainly did :
package com.xxxx.test1;
import javacard.framework.*;
public class Test1 extends Applet
public static byte testMe()
return (byte)1;
}

Site edit not recognizing index.htm file

Going through the Site/Edit function to change server
information, DW told me it can't find the index.htm file. Waiting
on more information from the host - beside the new IP address, the
password has been changed and the upload path.
While I'm waiting on that info want to make sure there's not
something on my end that could be wrong. The file is in the root
directory, the name has not changed, and the default file extension
is set to .htm. Is there something I could have done to cause this?
The site's been up for years, and I last changed it successfully
last month or the month before.

> it can't find the index.htm file
No, it's telling you that you haven't told it which file is
your home page.
Find it, right click, and choose "Set as Home Page". Bada
bing, bada boom.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"oreillers" <[email protected]> wrote in
message
news:gqoi3c$pbj$[email protected]..
> Going through the Site/Edit function to change server
information, DW told
> me
> it can't find the index.htm file. Waiting on more
information from the
> host -
> beside the new IP address, the password has been changed
and the upload
> path.
>
> While I'm waiting on that info want to make sure there's
not something on
> my
> end that could be wrong. The file is in the root
directory, the name has
> not
> changed, and the default file extension is set to .htm.
Is there
> something I
> could have done to cause this? The site's been up for
years, and I last
> changed it successfully last month or the month before.
>

Acrobat Pro XI is not recognizing Word 2013 files when I try to combine files in a single PDF. Please help.

I recently upgraded to Office 2013. Everything seems to be working fine with Acrobat Pro XI, except when I try to combine Word 2013 files into a single PDF, I get this message: "Acrobat does not support the conversion of one or more of your files to PDF. . . ." Please help. Thanks.

I've opened both Word and Excel. The Acrobat ribbon is showing in both programs and I did some test things and they seem to be working fine. However, I still cannot see or use formats other than pdf in the Acrobat Pro program. Is there another setting that needs to be adjusted?

CS6 is not recognizing my PNG files

Hi Everyone,
I cnanot find a PNG forum for the life of me and I cannot open any of my PNG files in CS6. Where do I go for that question? Can someone please point me in the right forum??
Thanks!
Angela

Thanks Curt Y. (I am logged in now as a different person for some reason.. not sure where my previous user name appeared..) In any case, I looked in Bridge and the PNG is not listed under anything.. as if it were wiped out from Adobe completely. Why is that? What could have caused that? The picture itself is visible in Bridge and in mini bridge but I cannot open it no matter how hard I try.

PSE 8 is not recognizing my RAW files from Canon T21 camera

This week I bought a new camera, Canon T2 i (550D), and also upgraded from PSE 7 to PSE8.
The PSE prgram does not recognize RAW files from the Canon T2i camera.
However, it does recognize the RAW files shot with the previous Canon Rebel XTi camera.
I have spend hours trying to figure this out and find different settings to solve this.
Can anyone help?

You need to download and install the latest version (5.7) of the Adobe Camera Raw plug-in:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4685
Be sure to follow the manual installation instructions on that page precisely.

Photoshop Elements 11 not recognizing my CR2 file

I've previously updated Elements 11 so it would recognize my CR2 files from my Canon 6D. But now I get the message when I try to open a file that "the file could not be opened because it appears to be from a model that is not supported by the installed version of Camera Raw." Now what do I do

JanteLaw
Thanks for the update.
A while back, with a Windows 7 64 bit laptop, I ran into that "The update server is not responding. The server might be offline temporarily, or the internet settings may be correct. Please try again later." when I was trying to update Camera Raw in Photoshop Elements with its Full Editor/Help Menu/Update.
A friend suggested the fix that worked for her and then subsequently worked for me. I do not recall all the details but it was based on disabling the laptop's Window 7 64 bit's "Microsoft Virtual Wifi Miniport Adapter". I believe that she said the path to it was:
Control Panel
Network and Internet Sharing Center
Change Adapter Settings
followed by a right click on "Microsoft Virtual Wifi Miniport Adapter" and selection of disable. Are you having the same download problem trying to download from Help Menu/Update from any other version of Photoshop Elements?
She also suggested that a Bluetooth interference was possible. That did not apply in my case.
No guarantees on this one, just a fuzzy recollection for what worked for me on one particular laptop. Proceed with caution if you do find the Microsoft Virtual Wifi Miniport Adapter included on the computer that you have.
Thanks.
ATR

HT203477 FCPX is not recognizing my project files.

Similar Messages

Maybe you are looking for