HT203477 I've been trying to burn a DVD edited with FCP_X. I keep getting a "Quick Time Error 0" and my DVD doesn't burn. Why!

I have been getting a "Quick Time Error 0" when I try to burn a DVD even when using a dual layer DVD. The total length is only 2.5 hours long! I've been trying to burn this DVD for 2 months.

Can you tell us how and what does the burn.
Step be step is useful.
Al

Similar Messages

I trying to download itunes on my laptop several times but I keep getting a Quick Time error -2096. How do I remove this error?

I trying to download itunes on my laptop several times but I keep getting a Quick Time error -2096. How do I remove this error?

Do you see the problem if you turn off Compatibility Mode for QuickTime?
Right-click on the QuickTimePlayer application (located in C:\Program Files\QuickTime) and choose Properties from the shortcut menu.
In the Properties window, click the Compatibility tab
Deselect all checkboxes currently selected in the Compatibility tab.
Click Apply.
Close the Properties window.
Check out this Apple document -> Error -2096 message when opening QuickTime for Windows in Compatibility Mode

I keep getting a run time error on my elements 11 photo editor when trying to upload a photo

I keep getting a run time error on my elements 11 photo editor when trying to upload a photos?

Please try updating to version 19.0
Please check if all your plugins are up-to-date. To do this, go to the [http://mozilla.com/plugincheck Mozilla Plugin Check site].
Once you're there, the site will check if all your plugins have the latest versions.
If you see plugins in the list that have a yellow ''Update'' button or a red ''Update now'' button, please update these immediately.
To do so, please click each red or yellow button. Then you should see a site that allows you to download the latest version. Double-click the downloaded file to start the installation and follow the steps mentioned in the installation procedure.

I keep getting a run time error when trying to update to the current software.

It says that the connection has timed out? I have tried a renaming the file but that does not work either? any help?

Some possibilities:
You are on a network that blocks streaming content or otherwise won't let you access it
You have restrictions set to block some content (Settings App, General, Resrrictions).

I downloaded a TV episode and it looks like it is basically completed (the line is almost at the end) but the download won't finish and I keep getting the message "Download error, tap to retry" which doesn't work. I've tried everything. Any suggestions?

I've tried rebooting, closing out and reopening iTunes, and even tried to repurchase the show in HD (which the iTunes Store won't let me). Any input would be greatly appreciated!

I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not downloading properly. If you can't see "Report a Problem" next to the entry, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.
(Not entirely sure what happens after you click that link, but fingers crossed it should be relatively straightforward.)

Trying to open the download for CS6 but I keep getting a "problem has occurred" message and an error code.

I have downloaded both the 4.5G Adobe Creative Suite 6 package and the 1MB .exe unloader but when I try to open them I keep getting a "problem has occurred while extracting some files," message. That is followed by a "problem has occurred while extracting the archive" message. The error code received is "Exception EAccessViolation in module DesignWebPremium_CS6_LS16(1).exe at 0001B836" This is followed a series of addresses. The extractor will not work when running as administrator either. I do not know what to do. I am using a Windows 8.1 PC, any help?

Hi otterbell
Download the setup from below location and use it to install the products..
http://prodesigntools.com/adobe-cs6-direct-download-links.html
Use the Important instructions on the page to start your download, Use your Serial key to activate them.
~Mandy

I am trying to download the new version of Adobe Flash- keep getting no mountable file error

Please help- how do I get rid of this?
Thanks

Right you are! Go to this page : http://www.adobe.com/support/flashplayer/downloads.html#fp11.9 and download the content debugger and follow the prompts
Thanks

I keep getting support not installed error 2 and tried to unistall all and keep getting it

i uninstalled itunes following the instructions but keep getting the error message that i need apple support error 2 and reinstall itunes

See Troubleshooting issues with iTunes for Windows updates.
Start with the section Install missing components.
tt2

I have been trying to burn a DVD for weeks now and the same message pops up every time..."error during the rendering/encoding of the menus/slideshow." What can I do to burn my DVD? thanks!

I have been trying to burn an iDVD for weeks now and the same message pops up every time..."error during the rendering/encoding of the menus/slideshow." What can I do to burn my DVD? thanks!

iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
 Cheers, Tom

Been trying to burn a movie onto DVD and get this "The disc can't be burned, because the device failed to calibrate the laser power level for this media" Anybody know what it means and what to do? Help! Thanks

Been trying to burn a movie onto DVD and get this "The disc can’t be burned, because the device failed to calibrate the laser power level for this media" Anybody know what it means and what to do? Help! Thanks

It generally means that the media is faulty or of poor quality. Most of us here use Verbatim, Maxell or Taiyo Yuden media.
OR
Your Superdrive may need a clean.
If you have further questions please state what Mac, with what versions of OS X, iMovie and iDVD you are using.

I have been trying to burn a movie in iDVD and it has been VERY slow. Never had problems in the past. HELP!

Hi there, I have been trying to burn a movie I created in iDVD. When in the "creating your DVD" it is VERY slow saying it will take over 6 hours to burn the movie. I have never had this problem before. It also won't let me minimize the screen, I just get the beeping noise that something is wrong, but no pop up window telling me what to do. Does that make sense? Also the black & orange burn wheel is spinning VERY slowly and will often just stop. Any help would be much appreciated. Thank you!

Hi
When iDVD goes slow to ridiculously slow - it usually depends on - low free space on Start-up hard disk
• I set for a minimum of 25Gb free space
• 10Gb might work but slow
• 5Gb - slow and un-stable - DVD usually doesn't play
• <1Gb - iDVD might not even start and even so Mac OS runs into problems.
Else
Not knowing the origin to Your problem - General approach when in trouble is as follows.
• Delete iDVD pref file - *or rather start a new user/account* - log into this and re-try
iDVD pref file resides.
Mac Hard Disk (start-up HD)/Users/"Your account"/Library/Preferences
and is named.
*com.apple.iDVD.plist*
While iDVD is NOT RUNNING - move this file out to desk-top.
Now restart iDVD.
• Free space on internal (start-up) hard disk if it is less than 10Gb should rather have 25Gb
• Hard disk is untidy. Repair Permissions, Repair Hard disk (Apple’s Disk Utilities application)
• Program miss-match. iDVD 5.0.2, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK - DON’T work under Leopard
• Program miss-match. iDVD 6.0.4, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK (might work under Leopard)
• Program miss-match. iDVD’08 v. 7.0.1, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK will work under Leopard)
• Program miss-match. iDVD’09 v. 7.0.4, Mac OS X.5.8 AND QuickTime 7.6.4 - is OK (does work under Leopard)
• iDVD (08) v7 Locate theme folder. Move out iDVD1, iDVD 2 and eventually iDVD4 folders to desktop - re-try
Macintosh HD/Library/Application Support/iDVD/Themes/ zzzzzzzzzz
or
Macintosh HD/Users/Your log-in//Library/Application Support/iDVD/Installed Themes/ zzzzzzzzzz
• Try a Cleaning CD/DVD that cleans the laser lens on the DVD burner/player
iDVD 6.0.4 and iDVD 7.0.1 are compatible with Mac OS X 10.5 Leopard
Last resort. from Craig. Solved the problem!! Finally!!
I deleted every iDVD application and folder from my boot drive,
emptied the trash and then installed iDVD 08 using the customize option
and I am up and running.
If You do a re-install be sure to get rid of all iDVD old parts AND then EMPTY the Trash-basket !
iDVD updated ?
Apple Codec updated ?
Start a New Clean project - or delete project assets
No of Colors - must be set to millions
EdinSF writes that, The 10.6.3 update with an Open GL fix seems to have taken care of the problem.
Yours Bengt W

I'm trying to import photos from my iphoto library, but keep getting a message saying I cant import from 7.1.5, that I need to upgrade to 7.1.5 or later. But I have version 8.1.2. I don't know what to do. I've been able to import in the past.

I'm trying to import photos from my iphoto library, but keep getting a message saying I cant import from 7.1.5, that I need to upgrade to 7.1.5 or later. But I have version 8.1.2. I don't know what to do. I've been able to import in the past.

Sounds like an issue with the iPhoto Library
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

Hello, when trying to insatll itunes on my windows7 pc, I keep getting error occured before installation of itunes was configured. No mdifications have been made to your computer...itunes

Hello, when trying to insatll itunes on my windows7 pc, I keep getting error occured before installation of itunes was configured. No mdifications have been made to your computer...

Hey AJS4862,
Thanks for the question. If I understand correctly, you are having trouble installing iTunes on Windows. I would recommend that you read this article, it may be able to help you isolate or resolve the issue.
Issues installing iTunes for Windows - Apple Support
Thanks for using Apple Support Communities.
Have a great day,
Mario

I have been trying to export a keynote powerpoint with voice over to quick time. It keeps crashing. Can anything be done?

I have been trying to export a keynote powerpoint with voice over to quick time. It keeps crashing. Can anything be done?

Can you explain this better, there appears to be a strange work flow going on, have you imported PowerPoint into Keynote or you are trying to export to PowerPoint?
There are many users who have trouble with a recorded voice over going to Quicktime.
Try this repair, its sorted out many similar problems in the past.
Complete all the tasks and in the order shown:
1 delete all the iWork applications if you have them, not just Keynote by using Appcleaner from Mac Update to           do this, its freeware
2 restart the Mac;   Apple menu > restart
3 immediately after the start chime, press the shift key until you see the Apple symbol.
         let it fully boot up, it will take longer as the OS is repairing the drive
4 when fully booted, go to Applications > Utilities > Disc Utility; click on the boot drive then First Aid tab and           click repair disc permissions
5 when complete, restart the Mac normally
6 install Keynote from the Mac App Store
Please report back to let us know if this helped.

I have been trying to set a new voicemail greeting on my iphone 4s but every time i check the 'save' button it says Voicemail Unavailable, try again later. Any help would be greatly appreciated! thanks

I have been trying to set a new voicemail greeting on my iphone 4s but every time i check the 'save' button it says voicemail unavaliable, try again later. Really do not know what else to try. Any help would be greatly appreciated! thanks

Voicemail is a Carrier feature... Contact your Carrier...
But first... Try This...
Close All Open Apps... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

HT203477 I've been trying to burn a DVD edited with FCP_X. I keep getting a "Quick Time Error 0" and my DVD doesn't burn. Why!

Similar Messages

Maybe you are looking for