HT203548 seri not responding since update to 8.3 on iphone 6

since updating  to ios 8.3 on my iphone6, seri is not working. i am still able to use my mic icon on google etc. but not on my txt messages or when i  press the home button to access it, it dosen't seem to hear me!! HELP!

When you launch Siri, does she not speak out loud? And when you press the mic icon on the Apple keyboard, does the "ding" not sound to let you know when you can start/stop talking? (In my case, both were very, very quiet.) If so, here's what worked for me!
1. Hold the home button to launch Siri.
2. While the "What can I help you with?" screen is showing, turn the volume up!
Not sure what caused the volume to be turned all the way down, or if it will revert back, but so far, so good for me!

Similar Messages

  • Since updating to iOS 7 my iPhone spontaneously shuts down

    Since updating to ios 7 my iphone 5 will suddenly shutdown

    Hello dagger1,
    I would be concerned too if my iPhone was unexpectedly powering off.  I found an article with steps you can take when you encounter an issue like this.  I recommend following the steps below:
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 15 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    You can find the full article here:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Since update 7.0.6 my iphone 5 wont connect to wifi

    since update 7.0.6 my iphone 5 wont connect to wifi, i have tried the network connection reset 3 times it still wont connect to my modem or my range extender can anyone fix this
    thank you
    <Edited by Host>

    dont start on civility cause i wasnt having a go at you, i just dont appreciate having a new problem with my phone after every update.
    so sorry if i offended you, also as you my see in my last post i have already restarted my router and disconnected it a number of times and it still does not work - so for civilities sake i dont appreciate being accused of not knowing something that i have not admitted too

  • Ever since updating to new OS, my iphone won't sync to itunes. When I plug in the phone to the PC, it says I need to update itunes to 10.6.3 or later. I did, but still get the same error message.

    Ever since updating to new OS, my iphone won't sync to itunes. When I plug in the phone to the PC, dialog box says I need to update itunes to 10.6.3 or later. I did that update, but still get the same error message.
    Can anyone offer suggestions?
    Thanks!

    Since it told me to update, I updated to 10.7.
    Then when I plugged in the phone again, it gave the same message that I need to update itunes.

  • I have updated iOS7 today via iTunes as I was not able to update it directly in the iPhone. After the update I restored the back up and now the iPhone is not getting started. Please advice?

    I have updated iOS7 today via iTunes as I was not able to update it directly in the iPhone. After the update I restored the back up and now the iPhone is not getting started. Please advice?

    That error message suggest you have a permissions issue. Make sure you have full read/write privileges for the Drive/ Folder location that you are copying the files to. 

  • I am not able to update newer version on my iphone. Getting error An unknown error occurred (-9808)., I am not able to update newer version on my iphone. Getting error An unknown error occurred (-9808).

    I am not able to update newer version on my iphone. Getting error An unknown error occurred (-9808). PLease provide solution for this. I have tried connection setting all in existing discussions. Still facing issues with update iOS.

    Hi there,
    I would recommend taking a look at the troubleshooting found in the article below.
    iTunes Store: "An unknown error occurred (-9808)"
    http://support.apple.com/kb/ts2753
    -Griff W.

  • Windows 7 will not let me update the driver for my iphone 4s so I can see it in iTunes. Any suggestions?

    Windows 7 will not let me update the driver for my iphone 4s so I can see it in iTunes. Any suggestions?

    You turned off all firewall and antivirus ? You could try downloading the update via a browser - what device are your trying to download the update for ? If it's an iPhone 4 :
    GSM / sim card model
    CDMA model
    Then in iTunes press and hold the shift key on Windows when clicking the Check For Updates button which should let you navigate to the downloaded file

  • HT3702 I am not able to update my apps on my iphone and i am trying to update my billling info

    I am not able to Update my apps on my iphone.  there are certain songs and ringtones that you all are showing that I purchased and I have paid for them according to my billing records.  Apple said that the security question is in correct.  Please help.

    Apple ID: Resetting Forgotten Security Questions

  • Why has my FireFox gone painfully slow/Not responding since last update?

    Since the last update Firefox just does not want to work for me most webpages take 20-30 seconds to load and often It will just not respond and take a minute to load and when it does it will have a script error as for google images forget about it well into 2 mins to load after the not responding message finally goes My brother also uses Firefox and his works perfectly fine, I have disabled all addons and it is the same. If i use another browser (Chrome) It is super fast I have tried some suggestions from other posts like making firefox high priority and such there is little difference if any please dont makeme use chrome

    Hello,
    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information. <br>
    '''Note''': ''This will cause you to lose any Extensions and some Preferences.''
    *Open websites will not be saved in Firefox versions lower than 25.
    To Reset Firefox do the following:
    '''For Firefox versions previous to 29.0:'''
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox"[[Image:Button reset]] button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    '''For Firefox 29.0 and above:'''
    #Click the menu button [[Image:New Fx Menu]], click help [[Image:Help-29]] and select ''Troubleshooting Information''.
    Now, a new tab containing your troubleshooting information should open.
    #At the top right corner of the page, you should see a button that says "Reset Firefox"[[Image:Button reset]]. Click on it.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!
    Thank you.

  • Safari still not responding after updating to 8.1.2

    My iPad is fully up to date but still does not open the browser every time.  It comes up with Server not responding.  Mac Format suggested changing the DNS settings but why would you do this when the iMac and iPhone are working fine.  An iPad that can't access the internet is not fit for purpose in my view.  Inly a complete restart cures it.
    Any other ideas?
    Kaibil

    Hi Kaibil,
    It sounds like there’s an issue with Safari not launching on your iPad or it’s not loading webpages since updating iOS.
    If the issue is related to launching Safari, try restoring the iPad as shown in the article below.
    Back up and restore your iPhone, iPad, or iPod touch using iCloud or iTunes - Apple Support
    If Safari launches normally and the issue is related to all webpages not loading and other apps not accessing the Internet, try troubleshooting the Wi-Fi connection as shown here:
    iOS: Troubleshooting Wi-Fi networks and connections - Apple Support
    Ciao,
    -Jason

  • Hdmi does not work since updating to jelly bean

    Since updating my at305-16 to JB hdmi will not work . I go into settings and select hdmi out but get no signal on tv.

    I think it might be a JB driver issue. I was having the same problem connecting it to my LCD, but when I switched to my plasma it works. The LCD is 1080P Auto the plasma is 720P auto. But fropping my LCD to 7120P didn't help. I don;t know if you have two TVs to try on, but it couldn't hurt.

  • Pages 5.1 not responding after updated from AppStore

    I've update my Pages app to v.5.1 in my MacBook Pro and I can't open it after updated. When I open it, it still not responding all time. I've replace Pages app with older version and it can open but I can't open my newer version document that I've edited on New iMac. Anybody can help me? I have to use an iCloud beta now. Thank you

    In Pages 5 .plists are now stored within the application bundle.
    I will resist telling you to trash any because I am not sure if there are consequences doing so. With Pages '09 it was fine, but they weren't part of the application.
    You can validate fonts in Font Book:
    select all the fonts > Menu > File > Validate Fonts > turn off or remove those that report errors etc
    Also try starting PAges holding down the shift key in case it is simply a damaged Pages file.
    Peter

  • Tv adapter not working since updating ios

    since  updating my iPad 2  to iOS 8 my tv adapter no longer works, when I plug the adapter in a message comes up stating this device is not supported by apple

    Hello jimtallis,
    The steps detailed below may help get your TV adapter to function correctly.
    Check the compatibility
    Make sure the accessory is compatible with your device. If the accessory is on the Apple Online Store, you can see if your iPhone, iPad, or iPod touch model is listed as compatible.
    If your accessory uses the 30-pin connector, you might be able to connect it to your device using the Lightning to 30-pin Adapter or Lightning to 30-pin Adapter (0.2 m).
    See if your accessory's compatibility is limited. For example, some accessories might not charge iOS devices if they use FireWire instead of USB to charge.
    Disconnect and inspect the accessory, then restart your device
    Disconnect the accessory and turn it off, if possible.
    Inspect the connection between the accessory and device and make sure that no debris or other damage is present.
    Restart your iOS device by turning it off, then back on. When the Home screen appears, reconnect the accessory.
    Try a different device
    Make sure the issue is with the accessory, if possible. Always use an identical or similar, compatible device with the accessory you're troubleshooting.
    If there's static coming from the left audio channel when you use headphones, try connecting the headphones to a similar device.
    If the device isn't syncing when connected to the dock, connect it directly to the computer using the Apple 30-pin to USB Cable or try another USB port.
    If you're using Lightning to 30-pin Adapter in a connection chain, try using the same adapter on a similar or identical device.
    Restore iPhone, iPad, or iPod touch
    Restore your iOS device. You should rarely need to use this step with an accessory issue. If the issue only affects a third-party accessory, contact the manufacturer before restoring the device.
    Resolve issues with iPhone, iPad, and iPod touch accessories
    http://support.apple.com/kb/TS2634
    Cheers,
    Allen

  • My HP C4600 is not working since updating to 10.10.2

    My HP C4600 all in one printer is not correctly aligning, nor can I fix the issue by realigning, since updating to 10.10.2

    in addition, my internet now seems to be intolarably slow! Frankly, the new operating system 10 has been a total nightmare from the get go. I keep updating in hopes of getting back to Mac as I knew it, and it just causes more and more issues!!!!!!!

  • Quicktime 7 not responding when updated from QT6

    To any out there who've heard about this problem, please tell me what I'm doing wrong. QT7 looks amazing and I wanted in but I don't seem to have the right setup?!
    After I restart from the download and attempt to play anything from Apple's QT site, QT opens but no window comes up and the dock shows it's active (the little black triangle). I click and hold the QT icon to Force Quit and I notice that at the top of the menu it states "Not responding". I can successfully quit but upon successive restarts and re-attempts to play anything in QT7 it does the same thing. I've tried updating to QT7 three times now with each new update hoping this problem is resolved but to no avail.
    This also seems to affect my iTunes, doing the same thing to that app as well. No other apps seem to be affected and the QT plugin for Safari works. I don't have QT Pro and I'm running a MIDI rig with a MOTU MTP/AV through the Geethree Serial adapter plus a firewire MOTU 896 and ProTools Audiomedia 3 card. Anybody else going through this and found a fix?

    Hi
    Here is a protools/itunes/quicktime solution I found. It worked for me!
    "Basically the problem has been that the new Quicktime freezes, and takes ITunes with it, when you also have Pro Tools loaded on OSX 10.3.9. Some have remedied this by disconnecting their Digidesign hardware, but it's a temp fix only.
    Re-Installing ITunes will not solve this. You must go to your Digidesign Folder and run your Digidesign Core Audio Setup then remove ITunes from the list. At this point quicktime/ITunes should work fine.
    Also Apple has issued a Quicktime 6.5.2 Re-Installer for anyone who's havimg trouble with the Quicktime 7. Here is the link
    http://www.apple.com/support/downloads/quicktime652reinstallerformac.html

Maybe you are looking for

  • Macbook to macbook pro

    if i take my computer to the mac store and give my computer and the money, would you change it ?

  • When to use Java Web Service from WSDL, Webservice proxy, Web Service DataControl -- JDeveloper 11.1.1.7

    Hi Experts! I am having confusion among these 3 services provided in Oracle ADF. When to use and what service needs to be used? Once we generate Webservice WSDL. With the WSDL we have 3  options in Jdeveloper to invoke this service. 1. Java Web Servi

  • New to java - glitch in my program/game? should be a simple fix :)

    hey everyone, I'm a student who's new to java programming :) It's is also the first programming language that I'm learning. I know the basics, but nothing very complicated. I'm making a pong-like game, in an applet. As I was making the paddle and usi

  • Games centre: Cannot Send Friend Requests

    When I try to add a friend on my iphone 4 I get this: "Games centre: Cannot Send Friend Requests You are not allowed to send friend requests on this device" Why not? How can I play a game against a friend?! How can I invite my friend? Help please!!!!

  • What to Save to Make Space on Hard Drive

    I'm out of space on my internal hard drive and things have come to a crawl. I downloaded the nifty "Disk Inventory X" and it reveals many large files 2-4 GB. Some of them are iDVD files and some are iMovie files. How do I know what to save? If I made