HT203646 Apply wireless keyboard no longer will connect to MacBook Pro?

I'm on the latest version of OS and my Apply wireless keyboard has been working find for a couple of months until today.  It will not even find the keyboard when i go into settings and try to setup a wireless keyboard.  If i go into bluetooth settings, the keyboard shows but not connected.  If i click and tell it to connect it will not.  My Apple wireless mouse is working fine.
I changed the batteries in my keyboard still nothing.  I restarted my macbook and still nothing.  I can take my wireless keyboard and it will sync up fine with my iPad.
Any suggestions?
thank you

What wireless router do you have exactly??
Could it have failed? If it is an apple router.. do a full factory reset and start over.
Give all short names to the airport.. eg AEgenx and AE24ghz and AE5ghz for each band.. this helps to figure out what is wrong. No security for now until the test proves it is connecting.
Now connect to either band.. no luck then also try AE24ghz on fixed channels.. test 11, 9, 6, 1 in that order..
If it is successful immediately put on security.. WPA2 Personal with a 10-20 character pure alphanumeric password.
No luck or you have a non-apple router tell us more.

Similar Messages

  • Will the new Apple wireless keyboard and mouse work with my Macbook Pro?

    Looking at purchasing a wireless keyboard and mouse for my Macbook Pro. Figured the one made by apple will work, but not sure... Any suggestions on a good wireless keyboard and mouse, or knowledge on whether Apples will work or not?

    keyboard: http://eshop.macsales.com/item/Apple/MC184LLANB/
    magic mouse: http://eshop.macsales.com/item/Apple/MB829LLABB/
    I just got them last week and the keyboard is new and the mouse is used but looks brand new.  And you get a free pair of AA bateries with the mouse.  And you can get 2AA batteries for the keyboard for an extra $1.29 I highly recommend going this route as I did very recently and am very pleased.

  • Wireless Mighty Mouse won't connect with MacBook Pro in Bootcamp

    I recently swapped my Bootcamp-partitioned hard drive from an older Core Duo MacBook to a late-2007 Core 2 Duo MacBook Pro.  I had no problem using the wireless mouse with the MacBook.  I'd click on the Windows desktop once it booted up and it worked flawlessly.
    But on the newer MacBook Pro it won't stay connected.  I have to pair it with the Windows Bluetooth control panel each time I log in.
    I'm not sure if this is connected to the issue or not, but I'm not able to use the trackpad and buttons on the MacBook Pro keyboard either.
    I've seached the discussions without any success.  Advice anyone?
    Thanks in advance.
    Patrick

    Well, by some stroke of dumb luck it finally connected. I slid the on/off switch open until the green light started to blink, when the mouse connected I opened it all the way and decided to work.

  • How can I connect my macbook pro to printers on my windows wireless network, How can I connect my macbook pro to printers on my windows wireless network

    My Macbook Pro running lion 10.7.2 is connected to my wifi network, which also has a PC, an hp photosmart and an hp laserjet connected to a server.
    I have been able to set up printing from my mac to the photosmart by entering the ip address, although it can be tempremental.
    The problem is that I cannot even find the HP Laserjet on the network at all and cannot link up to it to print.
    Any ideas??

    Look in the printer manual for instructions.

  • Apple USB Keyboard not working when connected in Macbook PRO retina

    I have this problem. When I connect my new Apple usb keyboard directly to the laptop it does work. Is there any way to solve this problem?
    BR

    I just did the latest update and my Apple USB keyboard stopped working. The keyboard works fine with other computers and other keyboards work with my Macbook.
    The keyboard ships with a three foot extension cable. I plugged the keyboard into the Macbook with this cable and now it's working fine. I think it has something to do with the USB port being 3.0. A USB hub may also solve the issue.
    JD

  • My wireless keyboard no longer connects with my iMac since changing the batteries. It now shows as not connected, not paired and not configured. A friend recently connected his iPad to the iMac and since then the problem started. Any ideas to resolve this

    My wireless keyboard no longer connects with my iMac since changing the batteries. It now shows as not connected, not paired and not configured. A friend recently connected his iPad to the iMac and since then the problem started. Any ideas to resolve this?

    a friend told me that he wants my os x cd for my macbook pro to upgrade his imac.
    The discs that come with your Mac are "machine specfic" and cannot be used on another Mac.

  • Ultraslim Plus Wireless Keyboard and Mouse not connecting

    I just bought the Ultraslim Plus Wireless Keyboard and Mouse, but I can't get either to work.  My machine (ThinkPad X230-2324-HQ4) does not have a CD drive for me to use the install CD, so I found and downloaded the driver from your support site:
    http://support.lenovo.com/en_US/product-and-parts/​detail.page?&LegacyDocID=MIGR-77112
    I installed the driver properly and restarted my computer, but neither the keyboard or mouse will connect still.  I've checked the batteries, and I've verified that my ThankPad's Bluetooth drivers are up to date and working properly, but I still can't seem to get it to work.  I've found posts on here from people with similar issues, but they seem to all be related to the Ultraslim, not the Ultraslim Plus.  The Ultraslim Plus does not include a USB dongle for connection.
    Please help!

    The Ultraslim Plus Wireless Kit is Wireless 2.4G solution, it is not Bluetooth solution. It has a dongle when shipping. Maybe you can check the mouse or Keyboard inside and find the dongle. You can open the mouse battery bin, it should be a dongle at top of two batteries. If you still can not find the dongle, I suggest you call the Lenovo help center since you don't have the dongle.

  • The arrow keys on my wireless keyboard no longer scroll.

    The arrow keys on my wireless keyboard no longer respond or scroll. They will page down with the fn/command key, but do not respond by themselves. How can I fix this? This is with an iMac, 10.7.5. Thanks..

    I'm having similar issues with the wireless keyboard, the brightness buttons aren't working and Apple can't seem to fix the issue. They replaced the keyboard for me and the initially worked but now they aren't and this was replaced today.
    Can you please let me know how you fixed the f1 and f2 keys? Everything else works for me...

  • I am battling to connect my MacBook Pro to my new Samsung D7000 Smart tv. Both the tv and the macbook are on the same wireless network. Any ideas on how to solve this problem?

    How do I connect my macbook pro to my samsung smart tv its the D7000 and has all share?

    My suggestion is to get the magic trackpad, magic keyboard and magic wand and connect a DVI to HDMI cable and use the MBP in clamshell (closed) mode. This will allow you to run 1080P into the TV and essentially use the Samsung as a HUGE monitor. At that point you can use the TV itself to display whatever you want off the laptop or simply switch inputs and stream stuff out of smarthub as usual. I tried to connect mine via allshare (by the way samsung has the free allshare download of software for the PC but not the mac.) and while i DID have some succes (under windws) i had to run a non secure connection and in the end the cool factor wasn't worth the hassle, to me anyway. It was sort of a "cool i did it" now why bother..... Hope this helps.

  • HT204291 My airplay icon is no longer appearing on my Macbook Pro. How can I connect to my Apple TV?

    My airplay icon is no longer appearing on my Macbook Pro. How can I connect to my Apple TV?

    Restarting MacBook Pro, Apple TV and WiFi router could solve the problem.

  • HT1338 When I connect my Macbook Pro to my Dell DLP projector, either via cable or wirelessly, I just see a dark screen with the mouse and mouse trails only, can any one help?

    When I connect my Macbook Pro to my Dell DLP projector, either via cable or wirelessly, I just see a dark screen with the mouse and mouse trails only, can any one help?

    jpmarkques post is a good start point, after folling his directions, you can try detect displays. Also try different rsolution and refresh rates.
    Most of the projectors I have used support a 1024X768 res.
    Youcan also try a pram reset if it still does not detect.
    Leave theproctor connected and powered up, power down the MBP.
    Power back up the MBP and hold the following keys before you hear the start up chime:
    Option, command, P,R (no commas) continue to hold these keys till you hear the start up chime 2 times.

  • How do i connect my macbook pro to my tv wirelessly?

    How do i connect my macbook pro to my tv wirelessly? I have MacBoock Pro 13 inch OS X 10.6.8 and Samsung LED 8000 series

    Thanks for your reply.
    I am able to print wirelessly through my MacBoock Pro
    My TV discover other devices PC etc but not my Mac

  • Java will no longer run on my MacBook pro since I updated my java

    Java will no longer run on my MacBook pro since I updated my java - what the heck is with that? When I try to do as suggested and go under Java preferences it wont allow me make any changes this is the error message I get "Cannot launch "java preference" no compatible version of Java 1.5 + is available."
    Then it gives the option to open java preferences or quit. It will only allow me to quit as it won't open java preferences. Stupid updates!

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Is it possible to connect a MacBook Pro (prev model 2009, 2.26ghz) to an Apple Thunderbolt display:  will the cable fit?

    Is it possible to connect a MacBook Pro (prev model 2009, 2.26ghz) to an Apple Thunderbolt display:  will the cable fit?

    Sorry it won't work.  It will fit but the laptop can't communicate with it.  Please see many of the other threads here, specifically this one just above your post, that is discussing this exact question.
    Apple's specs for the ThunderBolt display state that it needs a ThunderBolt-enabled computer.  Your laptop has a mini-display port connection so it is not compatible with the new displays.

  • HT3500 how can i connect my macbook pro wirelessly to an hp printer with a asus rt 66acr router?

    how can i connect my macbook pro wirelessly to an hp printer with a asus rt 66acr router?

    Firstly, the HP printer must be connected to the ASUS' network. Then, simply connect your MBP to the network and your printer should be addable in Print & Fax in System Preferences.

Maybe you are looking for

  • AP Credit Memo error

    Hello, I'm creating a AP Credit Memo but wouldn't like to match, while entering manually the Oracle Forms allows me to create lines with out PO_NUMBER,PO_LINE_NUM but where as from Interface it is rejecting with  " No PO Line Num " as Reason. But if

  • Problem Installing ABAP Engine of SAP  WAS 6.20(TEST DRIVE VERSION)

    Hi I am trying to install ABAP Engine of SAP  WAS 6.20(TEST DRIVE VERSION) which I got with the official ABAP Reference book of SAP press. It is installing upto 91% and giving the following errors: RC code form SyCoprocessWait  = -2 . Error: DBR3LICE

  • Usage of PI SR in CE 7.2

    Hi, What are the configurations required in CE 7.2 to access PI wsdl published in PI SR. For this instance, I have create PI system in CE SR, but while I tried to search by selecting PI system, nothing displayed. I presume, I should display PI wsdl w

  • How do the Entity Bean in SUN J2EE1.3 Connect to Oracle Database9i

    I can connect to Database in my applications with codes: Connection conn = DriverManager.getConnection( "jdbc:oracle:thin:@172.28.200.43:1521:s hcd", "system", "manager"); Statement stmt = conn.createStatement(); But I can not connect to DB in my EJB

  • Multiple Row Data Selection in Popup Table

    In my Popup window there is a table control with ten rows. All the rows are editable. After i enter velue in all the rows and click submit button , all the values needs to be selected in main window. But the problem is in main window only one input f