HT203977 After Update my phone from IOS 7 to 8 . m phone become really bad losing signal all the time now i did update to 8.1 and still losing signal appearing  gprs  on display at place of 4 g or 3 g  and the needs turn to Airplane mode and come back to

After update my Iphone 4 s to ios 8.1 this device keep losing signal from 3 G  and  wifi , to fix that is necessary to me  turn on and off airplane mode  ,
How can i fix  this mess from Apple ios 8.1  ??? I do not have this problem before  when was ios 7

hello...
I am having the same issue here... just upgraded my 5s to 7.1.1 (never jailbroken - factory unlocked) and then boom... NO Service!!! Searching ... that's it. currently using Smart Telecom Sim... at first it was working for me... after 6-7 hours, it started the No Service issue. I cannot send a text or make a call...
I did the steps you have taken but it is still not working... any updates on your end?

Similar Messages

  • My ipod says disconnect all; the time now i have updated and restored it

    I just opened itunes & connected my ipod. I restored my ipod because i deleted the songs from my ipod and updated it but they didnt come of so i used iupod updater and now it just say "do not disconnect" but it is not showing "do not disconnect" in itunes, but it is on my ipod.This is my second ipod and the same happened last time. can someone please help?. Thanks

    If you automatically update your ipod, here's what to do, connect your ipod and WAIT untill itunes knows it's there, then go to edit, preferences, then go to ipod, then if you auto update it, make sure that the box that says "enable disk use" is unchecked. Then click ok. If you manually update, slect auto-update without the "enable disk use" selected.

  • HT4972 I tried updating my ipod from iOS 4 to iOS 5 but after it restored and i tried configuring it i receive an unable to activate message?

    I tried updating my ipod from iOS 4 to iOS 5 but after it restored and i tried configuring it i receive an unable to activate message?

    Well that is likely to be your problem. After the upgrade the phone locked to the orginal carrier.  You will need to find out who that was and either use a compatible SIM from that carrier or have that carrier offically unlock the phone

  • What cause searching network problem after updating iphone 6 from iOS 8.1.2 TO iOS 8.1.3?

    what cause searching network problem after updating iphone 6 from iOS 8.1.2 TO iOS 8.1.3?

    SSince Apple does not support downgrading the iOS I suggest you start a new question that gives a good title to a specific problem. Then in the body of the thread describe the problem in detail, tell us what steps you have tried so far to correct the problem, what happened, and what error messages you received.

  • If I update my 3gs from ios 4.1 to 6.1.3 will it crash the phone?

    if I update my 3gs from ios 4.1 to 6.1.3 will it crash the phone?

    If you are running iOS 4.1 on a stock, unmodified 3gs, you should
    have no problem. Do a backup of all your data, music, pictures, etc
    before as protection.
    If your iPhone has been jailbroken or hacked to work with a carrier
    other than the one the iPhone was originally locked to, you may
    have problems.

  • Hello everyone,   I just updated my 3GS from iOS 5.0.0 to 5.0.1   Since the update, Itunes says that no SIM card is detected, and the iPhone says that it cannot be activated. It also obviously does not detect any network.   I tried restarting the phone se

    Hello everyone,
    I just updated my 3GS from iOS 5.0.0 to 5.0.1
    Since the update, Itunes says that no SIM card is detected, and the iPhone says that it cannot be activated. It also obviously does not detect any network.
    I tried restarting the phone several times, removing the SIM card several times, but it did not change anything, the SIM is still not detected.

    You do not need to keep posting the same thing over and over again.
    Look to the right side of this page at "more Like this" or do a forum search.

  • HT1222 after updating my IPod from IOS 4.3.3 to IOS 5.1.1 . why it cannot be synchronized on the itunes ? i have itunes version 10.5 .

    after updating my IPod from IOS 4.3.3 to IOS 5.1.1 . why it cannot be synchronized on the itunes ? i have itunes version 10.5 .

    Try updating your iTunes, updated version I think is already on 10.6.something

  • How to update Ipad 2 from IOS 4.3.5 to IOS 5. Itunes won't let me do it because it keeps showing error messages asking me to check if my network is active.

    how to update Ipad 2 from IOS 4.3.5 to IOS 5? Itunes won't let me do it because it keeps showing error messages asking me to check if my network is active.

    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 7.1.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    You can no longer update to iOS 6.x, or down grade the iOS.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and antivirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 7.x, the next update can be installed via wifi (i.e., not connected to your computer).
    Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
    How to Upgrade to iOS 7
    The iOS 7.0 update requires around 2.5 GB of storage space, so if your iPad is almost full, you may need to clear up some space. You can check your available space in Settings -> General -> Usage.
    There are two ways to upgrade to iOS 7: You can use your Wi-Fi connection, or you can connect your iPad to your PC and update through iTunes. We'll go over each method.
    To upgrade using Wi-Fi:
    Note: If your iPad's battery is under 50%, you will want to plug it into your charger while performing the update.
    Go into the iPad's Settings.
    Locate and tap "General" from the menu on the left.
    The second option from the top is "Software Update". Tap this to move into the update settings.
    Tap "Download and Install". This will start the upgrade, which will take several minutes and will reboot your iPad during the process. If the Download and Install button is grayed out, trying clearing up some space. The space required by the update is mostly temporary, so you should gain most of it back after iOS 7 is installed.
    Once the update is installed, you may have to run through the initial steps of setting up your iPad again. This is to account for new features and settings.
    To upgrade using iTunes:
    First, connect your iPad to your PC or Mac using the cable provided when you purchased your device. This will allow iTunes to communicate with your iPad.
    You will also need the latest version of iTunes. Don't worry, you will be prompted to download the latest version when you launch iTunes. Once it installs, you may be asked to setup iCloud by logging into your iTunes account. If you have a Mac, you may be prompted on whether or not you want to enable the Find my Mac feature.
    Now you are ready to begin the process:
    If you upgraded iTunes earlier, go ahead and launch it. (For many, it will launch automatically when you plug in your iPad.)
    Once iTunes is launched, it should automatically detect that a new version of the operating system exists and prompt you to upgrade to it. Choose Cancel. Before updating, you will want to manually sync your iPad to make sure everything is up to date.
    After canceling the dialog box, iTunes should automatically sync with your iPad.
    If iTunes doesn't automatically sync, you can manually do it by selecting your iPad within iTunes, clicking on the File menu and choosing Sync iPad from the list.
    After your iPad has been synced to iTunes, select your iPad within iTunes. You can find it on the left side menu under Devices.
    From the iPad screen, click on the Update button.
    After verifying that you want to update your iPad, the process will begin. It takes a few minutes to update the operating system during which time your iPad may reboot a few times.
    After updating, you may be asked a few questions when your device finally boots back up. This is to account for new settings and features.
     Cheers, Tom

  • HT4972 I am trying to update ipod touch from ios 4.3.2 to ios 6.1.3.  I have it connected to my computer, and the summary in itunes indicates the update is available.  However, when I click "update", it opens Windows Explorer and waits for a file name to

    I am trying to update ipod touch from ios 4.3.2 to ios 6.1.3.  I have it connected to my computer, and the summary in itunes indicates the update is available.  However, when I click "update", it opens Windows Explorer and waits for a file name to open.

    I am not at that computer now, but I did check via windows update & with the check updates menu choice in the itunes program  - neither indicated a newer version of itunes is available. (it is a vista computer).
    The itunes software on the computer displays my ipod & the current ios (4.3.2), and indicates a newer ios is available (6.1.3). When I choose "update", I am taken to Windows Exploer and prompted to choose a file to open. it is as if the "update" button has the incorrect code attached to it.
    The ipod is working, but there are several app I would like to install, but I can't with the current ooperating system.

  • HT201442 hi, i am trying to update my Ipad2 from ios 4.3.3 to ios 7.0.4 i donwloaded the file but i am getting error 3194 and i cant update it what can i do

    Hi, I am trying to update my ipad2 from ios 4.3.3 to ios 7.0.4 after i have downloaded the update it cant update my ipad it gave me error 3194
    what can i do. Thanks

    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    Update and restore alert messages on iPhone, iPad, and iPod touch
    http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
     Cheers, Tom

  • HT4623 i had a problem when i update iphone 3gs from ios 5.1.1 to 6.1. How could i fix it?

    i had a problem when i update iphone 3gs from ios 5.1.1 to 6.1. How could i fix it?. I can active my phone?help me, please!

    Well we need to know what your problem is if you want someone to offer a solution for you

  • HT4623 i just upgraded my phone from ios 4 to ios 5 but now its not responding at all

    i just upgraded my phone from ios 4 to ios 5 but now its not responding at all, its just showing connect to the itunes

    If you just updated to iOS 5, then you had to hack it to do so. You can only update to the current version, which is 6.1.2.

  • Once i go to a place wherein there is no network, my phone says no network, but after i recover my network, its still saying that it still has no service. I try to put to airplane mode then put back to normal. I restart, then the network recovers.

    Once i go to a place wherein there is no network, my phone says no network, but after i recover my network, its still saying that it still has no service. I try to put to airplane mode then put back to normal. I restart, then the network recovers. Do you experience this kind of problem? Any solutions? It seems that upgrades are not a good idea. I have an iphone4s, but with updated 6.0.1...

    try to enter a gift card to cover your previous balance. Once covered it probably will allow you to change payment.

  • I tried to update my ipad from ios 4 to 5 and now it won't connect to my computer - it is fully restored and can't connect - getting an error message. Help!

    I just recently tried to update my ipad from ios 4 to 5 and now I am getting an error message when I try to connect it to the computer so that I can download all of my apps, etc. please help! Error message says iTunes could not connect to this iPad. An unknown error occurred (oxE8000000A).
    Help!

    Syncing with iTunes on a Mac or PC requires:
    Mac: OS X v10.6.8 or later
    PC: Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 3 or later
    iTunes 10.7 or later (free download from www.apple.com/nz/itunes/download)

  • HT4623 I am trying to update my ipad from ios 4.3 but when connected to itunes I get an  error messagesaying that the internet is not accessible when it is. How do I resolve this?

    Hi
    I am trying to update my ipad from ios 4.3 but when connected to itunes I get an  error message saying that the internet is not accessible when it is. How do I resolve this?

    Disable your firewall and antivirus software, restart your iPad, quit iTunes, restart your computer and then try to update again.

Maybe you are looking for

  • Daily Invoice Posting Report

    Hello, We would like to create a query that shows invoices and credit memos posted each day.  The columns would be the following and in this order: Doc Type...Invoice or Credit Memo No...Customer Code...Company Name...Posting Date...Cust Ref #...Due

  • How can I cancel a query?

    If a query run too long time,I need to cancel it.However, even if I force user logout,the query is still runing.How can I do?

  • Images merging and movies merging

    Hello! I am new to Java Media Framework and I'm sorry about my English is really poor. I read articles , like : [Generating a Movie File from a List of (JPEG) Images|http://java.sun.com/javase/technologies/desktop/media/jmf/2.1.1/solutions/JpegImages

  • Flash.media::H264VideoStreamSettings could not be found

    hi,everyone All of my efforts to load H264 class inside flash has been failed. I did all instruction to load this class , but this error occur at runtime: " VerifyError: Error #1014: Class flash.media::H264VideoStreamSettings could not be found. " Ad

  • Use on a Dual OS iMac

    I am running a 2.93 GHz 24" iMac with both Snow Leopard & Windows 7. I am wondering if there is a way to have iTunes on both sides but operate off of the same library without me need ing to add to library on both sides. In Mac OS X I have my iTunes s