HT204017 Yosemite update does not solve wifi problems

yosemite update does not solve wifi. Apple are as garbage as Microsoft now, but they have the cheek to charge twice as much!,
Apple, you have lost my future business...might as well buy a cheap windows laptop now.

Hello Chutley,
Thank you for using Apple Support Communities.
Depending on what is happing with your Wi-FI connection, the update may or may not resolve your issues. Since updating didn't resolve your issues, you might want to take a look at the following article for additional steps to try:
Wi-Fi: How to troubleshoot Wi-Fi connectivity - Apple Support
Regards,
Jeff D.

Similar Messages

Since I updated my 4S iphone to the latest iOS7 version, I can no longer close any of my apps. As a result, all my apps remain open on my phone. Even powering down and restarting does not solve the problem. Specifically, the icons don't wiggle anymore.

Since I updated my 4S iphone to the latest iOS7 version, I can no longer close any of my apps. As a result, all my apps remain open on my phone. Even powering down and restarting does not solve the problem. Specifically, when I double-click the start button, my open app icons display. But when I hold my finger on an icon, the apps do not wiggle and display an "x" to close. Any advice... thanks?!

Double tap the Home button, then swop upwards on the App Preview (not the App Icon). Tap the Home button again when done to return to normal screen.

Comcast just replaced my cable modem/wireless router. All devices connect properly except my iPhone 4. It shows itself to be connected to the network, but it does not load any web page. Resetting the iPhone does not solve the problem. Any suggestions?

Comcast just replaced my cable modem/wireless router. All devices connect properly except my iPhone 4. It shows itself to be connected to the network, but it does not load any web page. Resetting the iPhone does not solve the problem. Any suggestions?

Thank you for your response.
I had rebooted the router (several times, actually), to no avail.
I do not know the answer to whether MAC filtering is enabled on the router. Have tried to find info about that, but unsuccessfully. Router is an Arris TG852G, supplied by Comcast. I would be surprised if MAC filtering were the issue, since in addition to the computer, we have successfully connected several other devices to the wifi, namely an iPad, a Android phone and a Kindle Fire - all able to access internet pages through the wifi, and all without a need to add the device to a MAC address whitelist. To add to the mystery, the Comcast tech was able to connect his iPhone 4 to my network and access web pages. He was unable to connect my iPhone, however, after trying for some time.
I seem to recall reading somewhere that an iPhone cannot connect to a wireless "n" router, only "b" or "g". The Arris router is described as a n/g/b compliant router, and as noted the Comcast tech was able to connect his iPhone, so don't know why that would be the issue here.
By the way, my iPhone does connect wirelessly to my network at home. This difficulty is at a second home.
Any other thoughts would be appreciated.

My new iPhone 5 has black and white lines on the screen. It's not been damaged. I've tried turning it off but this does not solve the problem? Please help.

My new iPhone 5 has black and white lines on the screen. It's not been damaged. I've tried turning it off but this does not solve the problem? Please help. I can't find my answer on the Internet.

By far the most common problem hardware-wise seems to be scuffs on the aluminium. Yours is the first report of a faulty screen I've seen.
If you use the same Apple ID on both devices it'll sync whatever you want it to - music/apps/photos/messages/etc.
I've just switched from a Galaxy S3 to iPhone 5 (having already owned an iPad for a while) so I'm in a similar position!

Fire FTP does not work with Firesfox 4. It worked OK with version 3. How can I get a New Fire FTP? Last version of FTP does not solve the problem

Fire FTP does not work with Firesfox 4. It worked OK with version 3. How can I get a New Fire FTP? Last version of FTP does not solve the problem

I need to know if it's 64-bit or 32-bit.
If it's 64-bit, try copying the mms.cfg file from C:\WINDOWS\syswow64\Macromed\Flash to C:\WINDOWS\system32\Macromed\Flash

HT1202 It simply does not solve the problem.

It simply does not solve the problem:
When I set/check "manually mange" on the primary iTunes (OS X 10.6), it is not selected/checked, when connecting to my iTunes on Windows.
It works as proposed with my new iPad, but not with the iPhone. There, I will still be asked to erease all my data.

Yes, indeed; the reason is the last sentence in the post by apple:
iPod shuffle and iPhone are intended for use with a single computer. You cannot load music from multiple computers or iTunes libraries onto iPod shuffle and iPhone like you can with other devices.
Brilliant Apple... truly brillant... why are you doing this only for iPod and iPad but not for the most mobile device ?????? I just don't get this policy but it never ceases to amaze me

TS1559 Because the company does not solve this problem?

Because the company does not solve this problem?
My iphone 4s has 14 months of use, this new and does not work!
So I want a "smartphone" that does not work?
Here in Brazil, to exchange charged me around 400 dollars. I have not changed because I can not, I paid the apple store around 1,360 dollares and does not work?
I am very disappointed with the apple!

Thanks Michael,
I take the device into Apple and they said that if I pay $ 400 they give me a new one.
I personally think this is absurd considering that I paid so dearly,
but in the end, I am very disappointed.
Probably my first and last iPhone.

Bridge update does not fix caching problems.

Dear Adobe,
The 5.0.1.23 update for Bridge CS6 does NOT fix the problem of constantly re-caching layered TIF files.
I originaly reported the problem here on May 16, 2012.
http://forums.adobe.com/thread/1007560
At that time I also submitted a bug report via photoshop.com, and received an e-mail response from Adobe support confirming the problem had been replicated in their lab and promising a fix in the next update.
I've since tracked several other reports of this bug and related cache problems.
I assume that, at best, we will have to wait another 6 months or more for the next update. How can I assure this bug will be addressed?

redcrown on guard wrote:
The 5.0.1.23 update for Bridge CS6 does NOT fix the problem of constantly re-caching layered TIF files.
At that time I also submitted a bug report via photoshop.com, and received an e-mail response from Adobe support confirming the problem had been replicated in their lab and promising a fix in the next update.
Thank you for this bit of information. Maybe it means I can stop the deactivations/uninstall/reinstall/reactivate cycle to try yet another solution. And hopefully, this will stop the re-caching problem with other than tif files.
regards
*S*

ITunes 11.2.1 does not solve unsync problem

Just did update iTunes 11.2.1 but it can not solve the problem. My macbook pro can not sync to iPad Air, iPad 2, iPhone 4. Pls help me. What should I do? Do I have to wait another updates from apple? Thanks

"This movie requires QuickTime, which is not supported by this version of iTunes" - https://discussions.apple.com/thread/3832288 - switch iTunes to 32 bit mode.
Another solution involving deleting files and re-adding them - https://discussions.apple.com/message/20074664

FCPX10.1.1 does not solve the problem with long-time clip editing!

OS: clean installed mac os10.9.1
FCPX: FCPX10.1.1
Project: 4clips, all of the clips is about 1 hour long (dvcprohd)
Disk: 900MB/S++
machine specs:
2*3.06Ghz 6-core
24GB DDR3
and I've tried these graphic cards:
K5000
and
2 5770
all get the same results:
If I double press the "L" key, the response of FCPX is too slow
If I do other operation like browse the clip, or import long time clip,
the FCPX will become too slow to browse the timeline.
I've found the FCPX like to generate audio waves of the clip and
there's no option to shutdown this! I've tried all the options in FCPX like
do not show the waveform of audio in preference and close the audio waveform in timeline
I don't think I can work the project with 10.1.x.
the 10.0.9 also has the 1st problem, but don't have the 2nd problem.
Another project: 2000++ 4K 50P clips(XAVC), but on FCPX 10.0.9, all of the clips is less than 40mins, always 20seconds.
though it will get slower when we import clips day after day,
it's much more smoother than 10.1.1!!!!!!
so,
I don't think we should update to 10.1.x for the little promotion of performance.
and 10.1.x also do not support nvidia K5000 card.
the render is slower than ait5700.....
I hope apple can solve the problem,
all of the above is just basic editing needs!
if the fcpx can not do even a long-time clip editing
why should I use it?

2 project:
1. 4*1 hour clips dvcprohd
that's the problem! I can not bear it.
2. 2000++clips 4K XAVC 50P project which I don't run on FCPX 10.1.1
I run it in fcpx10.0.9, it's fine, but slower when I imported more and more clips.
until now I can bear it.
the fcpx10.1.1 editing long-time clip has problem:
1.
it use 150MB/s harddisk speed to generate the waveform.
I have 900MB/s disk speed, so that's not the problem,
but it generate all the time!
1 hour clip's wavefrom generates for 1 hour without stopping, if I stop it , the fcpx crashed!
2.
when I skimming the clip for editing, the fcpx gets slower, always 2mins to response my operation.
3.
when I double press J or L key, the fcpx will need about 1 min to response.
the FCPX10.0.9 editing long-time clip problem:
the fcpx10.0.9 can handle the long-time clips, but also has very slow response when I doulbe press J or L key.

9.0.2 does NOT solve synchronization problems

Since we have one title that says 9.0.1 solves the synchronization problem and one that says it does not, we truly have an issue, i.e., conflicting claims that need to be adjudicated.

Ok starting to understand what you are describing. My only other suggestion is to do this:
1. Quit iMoive, then go to the event in the Finder where you DV clips live.
2. Delete ALL of the iMovie cache folders INCLUDING the one that is inside the Thumbnail folder.
3. Relaunch iMovie and wait for everything to regenerate
Try that, I've had success in the past using this method
Thank you for your patience. Since I have quite a few such cache folders, unless I hear different from you, I will try this out on one carefully chosen event. By carefully chosen, I mean one in which there is a scene near the end of the long event that now clearly exhibits a lack of synchronization.
(My tentative guess is that 9.0.2 solves the problems caused by 9.01, but not the lesser ones caused by 9.0. In the latter case, only people with very long events will notice a problem.)

I cannot send or receive group text messages as well as pictures messages / MMS. What should I do? The settings on Messages was set to receive group texts but it does not solve the problem.

I cannot send or receive group text messages and picture messages / MMS. The settings on Messages are already set to receive group texts but it does not help. What should I do?

Wow, 1yerdua. That's far too long to be having this messaging trouble. We want to find the resolution fast! If you turn off your Lumia's WiFi (Menu > Settings > WiFi), are you still able to access data-oriented applications like Internet Explorer? Have you been to other areas of the state/country and experienced the same trouble?
JenniferH_VZW
Follow us on Twitter www.twitter.com/vzwsupport

What is my next step if Apple Tech support does not solve a problem?

Apple Tech support and engineers have not been able to solve an iCal / iCloud issue.
What do I have to do next to be able to use native apple Calendar app with my iCloud calendar?
Ron
<Email Edited by Host>

Perhaps tell us what the problem is, and maybe someone here can help?
Make sure to include all relevant info (OS versions, what the problem is, what you have tried to resolve it).

I'm getting an Error mesage 148:3 when opening Premiere Pro CS4 it's telling me I have to restart computer. This does not solve the problem however. Working on a PC.

This message came out of the blue. I have made no changes to my computer or Premiere Pro.

I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

My FF on Windows 7 freezes on every page for 3-5 minutes (no kidding). Reinstallation does not solve the problem. Thanks for suggestions!

FF18, Win7 64bit edition. Extremely annoying and basically makes it impossible to use FF completely.
Like others mentioned, the webpages probably contain Flash -- but it is impossible to circumvent this these days.

You can check for problems caused by recent Flash updates and try these:
*disable a possible RealPlayer Browser Record Plugin extension for Firefox and update the RealPlayer if installed
*disable protected mode in Flash 11.3 and later
*disable hardware acceleration in the Flash plugin
*downgrade the Flash player to version 10.3 or 11.2
*http://kb.mozillazine.org/Flash#Troubleshooting
*http://helpx.adobe.com/flash-player/kb/flash-player-113-crash-mozilla.html
A possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls

HT204017 Yosemite update does not solve wifi problems

Similar Messages

Maybe you are looking for