HT204023 Can you connect to a Wii using Hotspot?

I am trying to connect my Wii to my Hotspot using Netflix. It sees me but when i put in my PW i get an error code about my PW. It is correct but i still cant connet. Is this possible or am i just spinning my wheels trying to do this?

FisherLady wrote:
I am trying to connect my Wii to my Hotspot using Netflix.
Do what?
Netflix has nothing to do with using a Hotspot feature on your device.

Similar Messages

HT204023 Can you connect the latest version iPad to a personal hot spot?

Can the latest iPad be connected to a personal hot spot?

Of course! I connect mine to my phone's personal hotspot all the time.

Can you connect a ps3 to your Mac using apple tv?

Can you connect a ps3 to your Mac using apple tv?

24r wrote:
Can you connect a ps3 to your Mac using apple tv?
I'm not quite sure what you mean by this - do you mena connect to the Mac to access streaming media or perhaps you were wondering if the AppleTV can behave as a wireless extender to give network access to the PS3 - it can't.
If you are looking for media server solutions there are several available that run on Mac, some free some commercial.
Free include:
http://en.wikipedia.org/wiki/PS3MediaServer

Can you connect Wii to Mac?

Can you connect Wii to Mac?

Welcome to Apple Support Communities
No. Nintendo does not support that option.

Can you connect your Ipad to a projector using Bluetooth

Can you connect your Ipad to a projector using Bluetooth, if so what projectors, My situation is that I want to connect my Ipad3 wireless to a projector where there is no wifi available so the apple TV and airplay won't work.

No.
If you have an Apple TV, get an Apple Airport Express wireless router which is small enough to fit on your pocket. You can set up a wireless network without having to have internet for your iPad and Apple TV to be connected to.
Or use a wired connection.

Can you connect via thunderbolt a mac book air 13" (2013) and a imac 21" (2013) together, using the iMac 21" as a 2nd screen

Can you connect via thunderbolt a mac book air 13" (2013) and a imac 21" (2013) together, using the iMac 21" as a 2nd screen

Welcome to Apple Support Communities
Of course. As both have Thunderbolt, it's as simple as buying a Thunderbolt cable, connect them and press Command and F2 keys on the iMac, so the iMac will be used as an external display for the MacBook Air. If you want more information, see > http://support.apple.com/kb/PH11302

TS3581 CAN YOU CONNECT A SHUFFLE (gen4) TO A KENWOOD CAR STEREO USING THE SHUFFLE USB CABLE ?

HELLO TO ALL
ABIGMAC1 HERE! GOOD DAY TO ALL
JUST WONDERING IF ANYONE COULD ANSWER THIS
CAN YOU CONNECT A SHUFFLE (gen4) TO A KENWOOD CAR STEREO USING THE SHUFFLE USB CABLE ?
I CAN USE AN AUX 3.5 TO 3.5 BUT NO WAY TO READ THE LIBRARY. PLEASE HELP ME!
THANK-YOU
ABIGMAC1

Check the documentation for the car audio system for device compatibility. A shuffle may not be compatible.
If the car audio system is able to use a regular USB flash drive connected to the USB port, you should just get an 8GB USB flash drive for $5-10, load it with your "car songs" and leave it connected to the car audio system, instead of constantly connecting and disconnecting an iPod.
If the car audio system has an aux. audio input mini-stereo jack, you can get something like this
http://www.amazon.com/Monster-iCable-Player-Auxiliary-Input/dp/B002AR5XIK
and connect your shuffle's headphones jack to the car audio system. You can then use your shuffle to play through the car audio system.

Can you set up apple tv using 2 different itunes accounts from 2 different macs in same household?

can you set up apple tv using 2 different itunes accounts from 2 different macs in same household?

No, you can only connect to one Home Sharing account at a time. If you want to see the content of the other Mac's library you will have to turn off Home Sharing on the Apple TV and log back in with the other iTunes account.

How can I connect to the database using ODBC within excel.

Hi,
How can I connect to the database using ODBC within excel and just refresh the data when needed.
Thanks,
Priyanka
Edited by: user554934 on Jun 9, 2009 2:53 AM

This is NOT an APEX relevant question, try posting it in the SQL/PL/SQL Forum..
Thank you,
Tony Miller
Webster, TX

How can you keep your iPhone 4 (using it as my car's iPod) staying on the Audible app? When I leave the car and return to continue hearing a book, it has switched to iTunes.

How can you keep your iPhone 4 (using it as my car's iPod) staying on the Audible app? When I leave the car and return to continue hearing a book, it has switched to iTunes.

The first time an iPhone is connected to iTunes that is used to sync with another iPhone or iOS device, you are prompted to transfer the backup for the other iPhone or iOS device or to set up the iPhone as a new iPhone.
The former does as provided - it transfers the backup for the other iPhone or iOS device to the iPhone replacing all data on the iPhone that is included with the backup being transferred. The latter does nothing allowing you to make your various selections for the iPhone sync preferences with iTunes.
This is designed to be done right away with a new iPhone.
If you don't have a backup for the iPhone with iTunes on your computer and don't have an iCloud backup that hasn't been updated since choosing to transfer the backup for your iPod Touch to the iPhone, the data that was on the iPhone is gone.

How can you connect your 4th gen ipod touch to a 3g network?

how can you connect your 4th gen ipod touch to a 3g network?

Yu need a device like the following:
- A MiFi or similar. They are credit-card size devices that act a wifi hotspot and then connect to a cellulare network
- Use a smart phone that can act as a wifi hotspot to share it s cellular connection. An iPhone will also do that via bluetooth. You need to purchase a tethering plan .

Can you connect a 4th generation iPad to a printer with a cable?

Can you connect a 4th generation iPad to a printer with a cable?

And more specifically ringing over Wi-Fi uses AirPrint. The printer must be compatible with AirPrint. Not all printers are.
http://support.apple.com/kb/ht4356

My X61 can't connect wireless when i use battery!!!

TYPE NO.: 7673-AN6
i confused why it can not connect wireless when i use battery?!
the problem drive me crazy nearly, it means i must take adapter every time
i help every one can help me!
cheers,

Most of the functionality and problems are in the drivers. The hardware tends to be discrete testable functions though these days there is a fair bit of functionality in the hardware. The hardware tends to be implementing better defined protocols where as the to and fro of the higher level protocols tend to be what varies from Access Point to Access Point. The 4965AGN is a fairly recent chip set and the drivers are far from smoothly running.
The problems can vary from AP to AP so may work at home but not at work etc. Some have reported here that the 4965AGN setup doesn't work with the Cisco 1200 Access Point and I have yet to be able to get it to work under Vista with the equipment at any New York Starbucks. T-mobile do use Cisco equipment but I don't know which models.
Anything you can do to simplify the situation helps. Maximum power. No security. Disable IPv6 on the connection etc. Just to give a rough idea of the kind of thing that might be wrong here are some of the things listed as known issues or fixed according to the readme of the driver (Originating from Intel) that was released for the 4965AGN on 4/11/08.
There are several authentication issues with EAP, PEAP and LEAP which will cause it not to authenticate. There are also Vista EAP issues and some things which may resolve with SP1 which was pushed out on update last week. So there are many comnbinations of situations which may not work and it is important to test with different access points. Authentication and security has more issues. Also at the higher speeds such as 54Mb some of the security mechanisms will not be able to keep up. AES is the only mechanism which Intel expects to work at 54Mb.
http://downloadmirror.intel.com/15806/ENG/relnotes.htm
There have also been past issues where the cards are silenced for twenty minutes after a failure to authenticate and in many cases the card will not be in a valid state after hibernation. It is noticable that when you phone T-mobile the first thing the tech has you do is completely shut the machine down - not hibernate - and begin afresh.
Once you have uninstalled and re-installed the drivers and connection manager a few times it is also possible to be having problems with junk left in the registry.
I don't recommend adding the 4965 drivers directly from the Intel site. I would wait for the one that has come through the Lenovo testing cycle.
In reality for those who don't want to make maintaining their laptop a serious hobby (Hopefully all of us - Far too much time is wasted on wireless) it is really a matter of rebooting your machine at a given access point. Trying your luck and then shutting it down and going somewhere else if it doesn't work. Use wires when you can. At home if your access point doesn't work check your configuratiions, temporarily remove all security, restore factory settings on the AP, reinstall from scratch and if it still doesn't work replace it with a different brand of Access Point.
Of course it is intended to just work and for 95+% of situations Wi-Fi does. The 4965AGN is newer so it has its fair share of early life issues to get resolved. Vista also still has issues. If the problem you are seeing is only when you are on batteries you are lucky and LANOgre's instructions may well solve it.
Message Edited by hiker on 05-19-2008 09:23 PM

Equium A200 can not connect to the interest using Wifi

Hi,
Since having to reinstall Windows Vista Ultimate, I can not connect to the interest using Wifi. It works fine for Ethernet, but when choosing the "Connect to the Internet" screen, its blank and will not find any wifi connects or let me manually connect to one.
In Device Manager under Network Adaptors, it now only shows the Ethernet Controller and not the Wifi adaptor. I have tried to download the driver from this site and after rebooting nothing has changed. I have made sure the machine has all the latest Windows updates as well. I have also mader sure that the wifi button is switched on at the front of the machine.
Also one a side note I cant seem to find the exact name of the Laptop in the system section of Control Panel other than Equum A200. On the download driver page there is NOT a A200 listed only A300 and A300D.
http://uk.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=UK&mode=allMachi nes&action=search&teddProduct=759&selShortMod=667
Any help would be grateful.
Spec:
Windows Vista Ultimate
Toshiba Equium A200
32-bit Operating System

>Also one a side note I cant seem to find the exact name of the Laptop in the system section of Control Panel other than Equum A200. On the download driver page there is NOT a A200 listed only A300 and A300D.
I guess you didnt look into the Archive the A200 is a little bit older therefore the drivers are placed in Archive!
If you want to know what driver you need then I recommend checking this faq:
http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=78
All Wlan drivers can be found here:
http://aps2.toshiba-tro.de/wlan/

How can I connect 1-wire sensor using DAQ?

Hi,
How can I connect 1-wire sensor using DIO in DAQ? I didn't find anything about it on this site.
Thanks.

Hello Depablo,
When making any voltage measurement you need to provide two wires and signal and a reference voltage. If you have a digital sensor or device with a number of outputs there should also be a reference or ground voltage output so that you're measurement device can read the correct value. If you don't connect the ground/reference voltage to the DAQ device then you'll be measuring a floating voltage and it won't be accurate. Voltage is a relative measurement--your sensor may be outputting 5 volts relative to its internal ground, but that ground may be 10 volts above your DAQ cards ground. If you measure the 5 volt line with your DAQ card you'll read 15 volts and not 5 volts unless you also connect the sensors ground to the DAQ card. If you're unsure which wire to use as a reference you can either contact your sensor manufacturer, or if you like you can post back with a link to your sensor's data sheet and I can see if I can identify the correct wire.
I hope this helps, and have a great day!
Brooks

HT204023 Can you connect to a Wii using Hotspot?

Similar Messages

Maybe you are looking for