HT204023 how to know the detail device that connected to the personal hotspot?

when i setup a personal hotspot , i can just know how many devices connected to the hotspot, but don't know the detail devices.
How can i konw? It's a security problem.

Concurrently (at the same time) if you are using bluetooth its one. If on WiFi, I'm not sure. I've never connected more than one, but it is possible that it can handle multiple devices. Consecutively (not at the same time) there isn't a limit.
Why is this a security problem? For both WiFi and bluetooth, there is as code required.

Similar Messages

The replication agent has not logged a progress message in 5 minutes. This might indicate an unresponsive agent or high system activity. Verify that records are being replicated to the destination and that connections to the Subscriber,

Hello Everyone,
Suddnly stop merge replication. transaction cannot replicated from publiser to sunscriber.
I tried to set heartbeat_interval= 5 but still not working..
The replication agent has not logged a progress message in 5 minutes. This might indicate an unresponsive agent or high system activity. Verify that records are being replicated to the destination and that connections to the Subscriber, Publisher, and Distributor
are still active.
What is the problem with merge replication and why this erroe comes..
any solution of this error or reconfigure merge replication?
please give me a solution

Run profiler on the subscriber to see what the merge agent is doing there. It is possible that there is some blocking that is causing the agent to hang. You might want to set the heartbeat to 10 or higher. The default is IIRC 5.
looking for a book on SQL Server 2008 Administration?
http://www.amazon.com/Microsoft-Server-2008-Management-Administration/dp/067233044X looking for a book on SQL Server 2008 Full-Text Search?
http://www.amazon.com/Pro-Full-Text-Search-Server-2008/dp/1430215941

Can I get the IP of a device that connects to the internet? My device stolen. Need this info to get police help

Hi, My iPad1 is stolen. There is no way to track - the only option is erase. So I did. It was erased yesterday, which means it connects to the internet. If I can have the IP, the police can help me.
Yesterday some agent told me you apple guys can only reveal the IP information to the police. But when I call the police officer and talked to your Higher Agent, even sharing his police badge Number, She told me that you don't store IP info. I felt being fooled. Sorry to say so.
Could u please do me a favor to escalate this? Since there are lots of Valuable and Sensitive data on my other stolen devices. I definitely will be super appreciated if I can get my stuff back.
Please don't say no to me. I am a IT person myself. I am pretty sure there must be some traces on the server(s) of Apple, maybe in some log files.
Please do HELP me!
Thanks!
Peng

Please be aware that you are not communicating with Apple when you post in these forums. These are user-to-user support forums, so in almost all cases the only people who will reply to your posts are, like me, your fellow users.
And no, Apple cannot determine the IP address of your device. There is absolutely no way they could. Nothing they do would track and store the IP address of your iPad. Even with an IP address, and even assuming it was a current IP address, locating the device from that IP address would be very difficult and require probably multiple court orders and a lot of effort. I very much doubt that the police would go to that much trouble for a single stolen iPad.
Sorry, but there is nothing Apple nor any of us here can do to help you.
Regards.

The replication agent has not logged a progress message in 5 minutes. This might indicate an unresponsive agent or high system activity. Verify that records are being replicated to the destination and that connections to the Subscriber, Publisher, and Dis

Does anyone know what is this mean and how to fix this?
I checked the records and they are not being replicated, and the connection to the subscriber are not active for some reason; but I don't know how to fix it.
Thanks
Philly Database developer

It basically means that the replication agent has not logged a status message back to the replication subsystem.
Basically you can't stop it, and these messages let you know if the agent has hung.
However you can delay the time before the subsystem will report this message. Do this by the following query - this will delay this message to 10 minutes from the default of 5 minutes. I have set this to days when replicating over ISDN/Phone lines.
USE master
exec sp_changedistributor_property
@property = N'heartbeat_interval',
@value = 10;
GO
looking for a book on SQL Server 2008 Administration?
http://www.amazon.com/Microsoft-Server-2008-Management-Administration/dp/067233044X looking for a book on SQL Server 2008 Full-Text Search?
http://www.amazon.com/Pro-Full-Text-Search-Server-2008/dp/1430215941
after changes below query...USE master
exec sp_changedistributor_property
@property = N'heartbeat_interval',
@value = 10;
GO still not working...

What is the name of the iPad cord that connects to the adapter

What is the name of the cord that hoos up to my iPad

Dock connector to USB cable - AFAIK - that is what it is called. From my Google search ...
Apple - iPad 2 - View the technical specifications for iPad 2.
www.apple.com/ipad/specs/
See full tech specs for iPad, including screen resolution, height, weight, performance,... VoiceOver screen reader; Support for playback of closed- captioned content ... In theBox. iPad; Dock Connector to USB Cable; 10W USB Power Adapter ...
You've visited this page 46 times. Last visit: 1/22/12

How can I get Windows computers to connect to iPhone Personal Hotspot?

I've had two different Windows laptops connect for a short while but once it loses the connection, I can't get it back.

Hi
Try
Right click My Compute / Select - Manage / Select - Services and Applications / Double Click - Services.
You should see in this list your mobile device which maybe name "Apple Mobile Device" or "iPhone Mobile Device".
See what it says in "Status" column. If there is nothing in it, right click on it and click "Restart"
Open iTunes and it should be recognised
If the status shows as "Started" come back and we'll try something else
Thanks

Does anyone know how to permanently remove a device that is trying to pair with my computer? I don't know what this device is or where it came from. I just want it gone. Thanks

Does anyone know how to permanently remove a device that is trying to pair with my computer? I don't know what this device is or where it came from. I just want it gone. This is the name of the device ArbAx6h2P6.

If it's a bluetooth device:
Bluetooth: How to delete a paired device:
http://support.apple.com/kb/ta27116

Does anyone know of a VI or how to go about writing one that will prevent the computers time/date from being disabled while an application is running.

Does anyone know of a VI or how to go about writing one that will prevent the computers clock/time from being disabled while an application is running. The time and date can normally be reset while an application is running by clicking on the time/date in the lower right-hand corner of the computer screen. I have an application that runs over several days and it is critical that the time and date of the computer not be changed. Is there an easy way to lock this out from the user? Note that I am what I consider an advanced beginner in LV.
Thank you,
Chuck
Solved!
Go to Solution.

That is not something you can do from LabVIEW, as it is an operating system operation, and it will depend on the operating system that you're using. On Windows you can use a group policy to control this. Please Google on "prevent time and date change in windows".
Also, please try to refrain from stuffing your entire message in the subject block. Keep the subject short, but descriptive enough so it can be understood what you are basically asking. Thanks.

Friend of mine bought movies(ITunesStore)one of the 5 devices that she could use is my Mac.She needs to use the movies on another device and for that I have to erase them,how do I do that?I deleted them but she can't still used them?How delete themsurely?

Friend of mine bought some movies (ITunesStore) one of the 5 devices that she could use them in is my Mac. She needs to use the movies on another device and ask me for delete the conection in my laptop. For that I erase them in Itunes, but she can't still used them? How delete the conections between my computer and her account?
Thank you for your answer.

Hello there, Ingridvon.
The following Knowledge Base article provides the information you are looking for:
iTunes Store: About authorization and deauthorization
http://support.apple.com/kb/HT1420
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

HT2589 Could you show me the full account information (account information)? How can I get the detail information that who charge me?

Could you show me the full account information (account information)? How can I get the detail information that who charge me?

I'm not entirely sure what you are asking, but you can view the purchase history on your account (and view your payment method) on your computer's iTunes : if you log into your account on your computer's iTunes via the Store > View Account menu option, you should then see a Purchase History section with a 'see all' link to the right of it. Click on that and you should then see a list of your purchases. On your iPad you can only see a cut-down version via this page (which also allows you to contact iTunes Support if you have a problem with a purchase) : http://reportaproblem.apple.com
There are instructions on this page for managing and stopping auto-renewing subscriptions : http://support.apple.com/kb/HT4098
Or do you mean something else ?

My Theme disappears from the DVD after I burn it on to a disc. I know it's there but my DVD player doesn't "see" it. How do I burn an iDVD that will play the theme?

My Theme disappears from the DVD after I burn it on to a disc. I know it's there but my DVD player doesn't "see" it. How do I burn an iDVD that will play the theme?

It sure is. It also plays on my PC using VLC Player. So, I know that it was burned onto the DVD.

HT204023 How do you view the devices connected to your personal hotspot?

My mac book is connected to my iPhone, and it is the only device I have allowed to connect, but in the menu bar on the iphone it shows that there are two connections to my personal hotspot.

You must do this in iTunes on a computer. Read this for the instructions.
iTunes Store: Associating a device or computer to your Apple ID

How do I read detailed device information in DAQmx?

Hi,
I'm developing an application using the DAQmx C API and the 6602 Counter/Timer. I would like to know how to read more detailed device information using the C API, i.e. more than just the type, serial number, and whether it's simulated. I have seen several posts about this topic, but none appeared to give a satisfactory solution. It has been mentioned that the DAQmxGetSystemInfoAttribute() serves this purpose, but it's not documented in the DAQmx C Reference Help files, so I don't know what attribute values ( DAQmxGetSystemInfoAttribute (int32 attribute, void *value, ...) ) are valid, and therefore am unsure as to what information can be obtained by this function. To be more specific, I would like to read device information such as pin names and function, number of counters, number and name of digital I/O ports, etc, so that the application could automatically identify and list the available resources (similar to the way MAX does as you go through the task creation procedure). Is this possible with DAQmxGetSystemInfoAttribute() or any other function?
Thanks,
Jeff

Hi Serges,
Thanks for your reply. I'm OK with retrieving the device names, the question is whether there is a way to obtain detailed information once I have the name. For instance, if I find (via DAQmxGetSysDevNames() and DAQmxGetDevProductType( )) that there is a PCI-6602 board installed, can I then call a function to retrieve details about the PCI-6602 (e.g. physical channel names, DIO port capabilities, etc.) rather than hard coding (yuck!) this stuff into the program. It seems plausible that there might be a set of files somewhere within DAQmx which provide this sort of device information - if so, how can they be accessed?
Jeff

How to recover photos from device that screen doesnt work, and didn't use cloud or a memory card. (chip)

How to recover photos from device that screen doesnt work, and didn't use cloud or a memory card. (chip)

I'm sorry to hear you no longer have access to your pictures ItzKB11. I know they're important, we'll do everything we can to help. However, since you did not back them up to any source and the screen does not work, we only have a couple options. Try using the USB cable to tranfer to PC:
From the Device to a Computer
• Launch Windows Explorer.
Using the computer keyboard, press Windows E ( E) keys.
Alternatively, right-click Start then click Explore.
• Using Windows Explorer, navigate to:
• SCH-I545 > Phone
• Utilize the computer to copy video/picture files from the following folders into the desired folder(s) on the computer's hard drive:
• DCIM
• Download
• Movies
• Pictures
• Disconnect the USB cable from the computer.
If you're unable to retrieve them that way, use this http://vz.to/1zyIQwo.
AdaS_VZW
Follow us on Twitter at @VZWSupport

MI 7.1: how can know my id device?

Hi, i sync with my device with the server, all work fine, but, in the device, how can know my id device?
Thanks,

Hi,
Its actually very long process but just a one time job and not tough either.
1. First in DOE you have to create all Dataobjects which are similar to syncbo's earlier.
2. For that go to MI 7.0 system and get the syncbo definition file.
3. Now in DOE go to transaction SDOE_WB and create a new software component version(SWCV) and make sure there is a check box which tells that this appliation runs in backward compatibility mode.
4. Now right click on SWCV and click on import syncbo definition file.
5. This will create all data objects in the DOE but you need to activate each of them which in turn generates all the dataobjects and also the distribution models for them.
6. If there are any rules you also need to activate them.
Now the client side changes:
1. Import your old applications "eclipse.war" file as a project into NWDS 7.1.
2. Go to preferences in NWDS 7.1 and in general setting configure your DOE system.
3. You have a button which says "Import meta data" i guess, if you click on that
it will take you to DOE system and in that choose the SWCV you have created and also all the data objects (synbo's earlier) and now a new mi_meta.xml file will be created in your project.
4. Now export this project as .sda file and upload it to DOE.
Best Regards,
Siva.

HT204023 how to know the detail device that connected to the personal hotspot?

Similar Messages

Maybe you are looking for