HT204023 I think there is a setting in my I pad forbed me from using hot spot , my sim works at diffrent I pad while it does not work with my I pad
Trying to use personal hot spot , it des not work . Using the same sim in a different device of the same type and operating system and generation it works correctly . It was working before in my I pad , why it is stopped , I wish to know , did I made a mistake ? what is it , did I changed the setting by mistake hindering the work of hotspot , advice me please
Yasser
Please do not give this any thought. I was such a dummy.. duh, you have to have something running to PLAY the input!!! I thought the Monitor was on in garage band, and found it was not.....
have a nice day
Sure wish you could remove posts you've made after you do the "DUH" thing.
dale
Similar Messages
-
adobe photoshop elements 12 organizer works, but adobe photoshop elements 12 editor does not work--it thinks it is a trial version.HELP
If I try to register 4 boxes circle endlessly.Why should I have to register editor separately from organizer?jaroFocb'15 wrote:
This is almost the same as the problem I had. I'm my case the Editor installed but not the Organizer! Adobe chat told me they no longer have chat or any other services for Elements 12. I guess they want people to buy their new Elements 13, but that leaves us in a bad place and doesn't say much for how Adobe cares about their customers After it moves on to their next version. I posted a message like yours over a week ago, and only got one email from an Adobe staff person, asking me to answer a couple of clarifying questions, but he never followed up on my response, so my problem is still unresolved. If you are luckier and are given a solution please let me know what it is -- it might work for me too, and I'd be very grateful! My email: [email protected]
Good luck.
Have you checked whether you have folder for PSE Organizer? It is normally at this location in Windows 7 and Windows 8/8.1:
<C:\Program Files (x86)\Adobe\Elements 12 Organizer>
If the folder is there then try double-clicking on the file called: PhotoshopElementsOrganizer.exe
If the folder isn't there at all then you need to re-install the package again using your original disks or from download from Adobe website. <Download Photoshop Elements products | 13, 12, 11, 10>
Hope this helps. -
Using Acrobat Pro X on windows 7. The replace pages feature does not work. Is this a known issue? Is there a fix?
Hi Todd,
I haven't heard other reports of this (though there was an issue quite some time ago where deleting pages on this combination of Acrobat/OS was challenging).
Can you please tell me what happens when you try to replace pages? Do you get an error message? Are you able to manipulate pages otherwise (delete, extract, and so on)? Is this issue unique to one file, or does it happen with all PDF files?
I look forward to hearing back from you.
Best,
Sara -
As above, I have also tried downloading a later version, also tried downloading Google Chrome, none work. I have tried using my laptop at several different wifi connections in USA and Firefox does not work on any. So it is not a wifi set up problem in our home in USA. I am running X.P and I.E 6. When I downloaded I.E 8 that would not work either, so I had to re set the laptop back to a date a week ago.
Unable to access certain bank sites with I.E 6, that is why I use Firefox. Any suggestions appreciated.
This is the message I get
"Unable to connect
Firefox can't establish a connection to the server at webmail.apscontrol.com.
The site could be temporarily unavailable or too busy. Try again in a few
moments.
If you are unable to load any pages, check your computer's network
connection.
If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies" -
Is there a way to configure sync over wifi in itunes that works. I have done a bunch of reading and it seems many people are having issues making this work. My experience is that it sometimes works, and sometimes does not.
I have had limited sucess with three different iphones, ipads, and two different computers and two different wireless networks.
Same poor sucess as others..
What is advertized by apple does not work 100% of the time. Is there a fix coming for this.shooternz wrote:
Here is the solution: Slow down. Give your project some love. Smell the roses.
Agreed about the roses but alas my next project always calls. Actually, I think what happens is I give each project SO much love that when it comes to exporting, I've run out of time.
shooternz wrote:
Then it would not be a default...it would be an option and you already have that option.
Semantics aside, I would love to be able to have it at least default to whatever option was last chosen. Or, perhaps I shouldn't use the word default again...I'd love it to simply remember my preferred setting. That's all. -
My left click does not work on my track pad on my macbook pro 13 inch, is there a fix
my left click does not work on my track pad on my macbook pro 13 inch, is there a fix
I recommend you to run Apple Hardware Test > http://support.apple.com/kb/ht1509 It's possible that something is damaged, and Apple Hardware Test will help you finding it. Make sure you tick the option to run an extended test, and connect your Mac to the charger.
If your Mac came with DVDs, you have to insert the Mac OS X DVD to run Apple Hardware Test. As you haven't got the SuperDrive, you will have to buy an external optical drive -
My problem is pretty easy to reproduce.
I created a project from scratch with a view model.
As you can see in the setter of "Age" property I have a simple logic.
public class MainViewModel : INotifyPropertyChanged
public event PropertyChangedEventHandler PropertyChanged;
private int age;
public int Age
get
return age;
set
/*Age has to be over 18* - a simple condition in the setter*/
age = value;
if(age <= 18)
age = 18;
OnPropertyChanged("Age");
public MainViewModel(int age)
this.Age = age;
private void OnPropertyChanged(string propertyName)
if (this.PropertyChanged != null)
PropertyChanged(this, new PropertyChangedEventArgs(propertyName));
In the MainPage.xaml
<Grid x:Name="LayoutRoot" Background="White">
<TextBox
Text="{Binding Path=Age, Mode=TwoWay}"
HorizontalAlignment="Left"
Width="100"
Height="25"/>
<TextBlock
Text="{Binding Path=Age, Mode=OneWay}"
HorizontalAlignment="Right"
Width="100"
Height="25"/>
</Grid>
And MainPage.xaml.cs I simply instantiate the view model and set it as a DataContext.
public partial class MainPage : UserControl
private MainViewModel mvm;
public MainPage()
InitializeComponent();
mvm = new MainViewModel(20);
this.DataContext = mvm;
I expect that this code will limit set the Age to 18 if the value entered in the TextBox is lower than 18.
Scenario: Insert into TextBox the value "5" and press tab (for the binding the take effect, TextBox needs to lose the focus)
Case 1: Debugger is attached =>
TextBox value will be "5" and TextBlock value will be "18" as expected. - WRONG
Case 2: Debugger is NOT attached =>
TextBox value will be "18" and TextBlock value will be "18" - CORRECT
It seems that when debugger is attached the binding does not work as expected on the object that triggered the update of the property value. This happens only if the property to which we are binding has some logic into the setter or getter.
Has something changed in SL5 and logic in setters is not allowed anymore?
Configuration:
VisualStudio 2010 SP1
SL 5 Tools 5.1.30214.0
SL5 sdk 5.0.61118.0
IE 10
Thanks!Inputting the value and changing it straight away is relatively rare.
Very few people are now using Silverlight because it's kind of deprecated...
This is why nobody has reported this.
I certainly never noticed this problem and I have a number of live Silverlight systems out there.
Some of which are huge.
If you want a "fix":
private void OnPropertyChanged(string propertyName)
if (this.PropertyChanged != null)
//PropertyChanged(this, new PropertyChangedEventArgs(propertyName));
Storyboard sb = new Storyboard();
sb.Duration = new Duration(new TimeSpan(0, 0, 0, 0, 100));
sb.Completed += delegate
PropertyChanged(this, new PropertyChangedEventArgs(propertyName));
sb.Begin();
The fact this works is interesting because (I think ) it means the textbox can't be updated at the point the propertychanged is raised.
Please don't forget to upvote posts which you like and mark those which answer your question.
My latest Technet article - Dynamic XAML -
XP windows restore does not work yet all is set correctly
XP windows restore function does not work. All the restore points exist with descriptions of the changes that prompted them. It will let me select them (restore points) and restore process will strart but after rebooting it will ultimatly let me know that it could not restore.
Does the Lenovo Restore and Rescue utility disable this function of XP ? ?
ThanksWell I have a 6460-8WU that came with Vista and I got the downgrade CD set and tried to restore to XP. The first time it said it failed to restore my system, but it seem to have XP and all the applications that I expected to see. Later I had a problem with the Welcome Windows screen being unavailable... used only the Classic Windows Logon, I called Microsoft and they suggested using their system restore.... which didn't work at all... I tried 5 or 6 different backup files from different days and none of them worked. At that point I decided to use the Lenovo downgrade CDs and format the hard drive restoring everything from scratch. It took me a few tries but eventually I did get it to say that it had successfully restored my system. The items I learned from like 4 failed attempts to restore it are this:
1. Don't try to restore it while in the advanced dock.
2. When the restore process says to remove Disk # x and press OK, remove Disk # x-1 (the currently inserted Disk, and insert Disk # x, and then do not press OK until you wait 20 or 30 seconds or until the little icon of a CD that flashes when Windows reads a newly inserted disk has finished. When I tried clicking OK either before I had actually inserted the next CD or too soon after I had inserted the next CD the process went downhill from there and failed to restore properly.
3. When it seemingly has read all the CD's and says it will now start the restoration process, but you are asked to press Next... well firstly there *is* no Next button to press and the other buttons other than Cancel are greyed out. The solution there is to wait, and wait, and wait... so long that you may think the process has failed and the computer is hung... but it is not. Eventually it will continue from that point.
Aside from that, I notice that there is a new version of the Recovery Application on the Support site, but
if you install the latest Rescue and Recovery 4.20.0511.00 in the readme there are 31 "considerations" listed, which are basically conditions under which it does not work properly or as expected, so I won't be trusting it to recover my system. I will make a Paragon Drive Manager image after I get the updates all installed and use that to restore from. -
My Bose SIE2i volume control does not work. (pause/play does work). This is the second set - the apple store in Sydney replaced the first set that had the same problem. It was working OK and has stopped.
Thanks again V.K. I did check the layout, and it was listed as alphabet when I inputted the password. So that doesn't seems to the the issue.
Just finished a truly mystifying experiment, but I put in a shorter password in the way mentioned earlier and it worked. I then systematically kept increasing the characters of that password and it seems that if the password starts to exceed about 16, it stops recognizing it. I am fairly sure it is not the password itself since it never gives an error when typing in the verification password. So unless I systematically make the exact mistake twice at the setup screen, and then don't or make a different mistake every time at the login screen, I don't think its my typing skill.
So problem solved for now, but I am still a bit worried. Maybe I should completely reinstall and use a shorter password.
Is there supposed to be a length limit? -
I installed windows 7 to my macbook pro, but my mousepad does not work in windows 7 and also i can not connect my windows 7 to projector, but i can use my macbook's mouse pad and i can connect my mac to projector,so please help me for windows 7 problem
i try to download now, do you think when i download and install the windows support software, can i fix the problem?
-
Lead Selection does not work after setting filter for ALV.
Hi, Can you please suggest on below scenario :
I have a Node with a sub node in it .
I am using the supply function on Sub Node to retrieve the date based on Parent Node.
There are two ALV's to display parent and item data. The issue is when a filter(user defined filter) is done on Parent table, the supply function does not work. The value is that of the selected row before setting the filter. Even after removing the filter, the item data is stuck and does not change on Lead Selection.
One thing I noticed is if the child table is a table UI, there is no issue. The only problem is when the second table is ALV
Thanks In AdvanceHi Prashanthi,
Your issue can be resolved as below
Create an event handler method 'set_alv_data' for the event 'ON_LEAD_SELECT' of parent alv
Write the below code inside the event handler method
METHOD set_alv_data.
DATA lo_node TYPE REF TO if_wd_context_node.
DATA lv_path TYPE string.
DATA lv_index TYPE string.
lv_index = r_param->index.
CONDENSE lv_index.
CONCATENATE wd_this->wdctx_my_parent_node
lv_index
wd_this->wdctx_my_child_node
INTO lv_path SEPARATED BY '.'.
lo_node = wd_context->path_get_node(
path = lv_path
DATA lo_interface TYPE REF TO iwci_salv_wd_table.
lo_interface = wd_this->wd_cpifc_alv_child( ). "get the ref of alv comp of child
lo_interface->set_data(
EXPORTING
* only_if_new_descr =
r_node_data = lo_node
ENDMETHOD.
The above code sets the data node of child alv based on lead selection of parent alv data.
Note: Replace 'parent_node', 'child_node' with your nodes & 'alv_child' with your alv component name of child alv.
If you want to control the data of child alv on filter function, you can use the event ON_STD_FUNCTION_AFTE and once you define the filter you get the r_param->id = 'SALV_WD_FILTER_DEFINE' & now you can clear data of child alv.
Hope this helps you.
Regards,
Rama -
I was running KeyPassFox with Firefox 8.0.1, but the plugin does not work in the new release (9) . Is there a way to restore my previous version with all of my bookmarks intact? I do not mind if I have to restore the plugins myself.
The plugin shows on the list as enabled and functioning, yet the tool does not show on the toolbar. It would appear that I need to restore the previous version of Firefox and wait until a newer release of the plugin is available before upgrading the browser.I copied the iTunes file from the external drive and it's in both places. I thought all I would need is the iTunes program (which I downloaded to new computer) and my iTunes library file. There must be something else that's missing. My iTunes library looks the same on the new computer as it does when I open it on the external drive. If I click on an iTunes library song from my new computer, it will only play if I have the external drive plugged in.
My back-up drive is a mess. I have multiple copies of music, video, photo, and document files and I don't know how that happened. ={ Obviously, I don't know how to back up stuff properly and there are back-up files extending over a 6- to 8-year period. I think all I did was just drag and drop the main folders from the back-up drive to the same main folders on the C: drive. Also (and I'm kind of fuzzy on this) Windows used to automatically save music files in a folder within my document files (which makes no sense to me). As my Jewish friends would say, "Oy Vey!" -
My old 17" MBP (2005) often crashes, freezes or shows grey screen at start up. Also track pad often does not work. I have re fomatted the HD and reinstalled system but to no avail. Genius bar says possible faulty HD, but I suspect logic board. All checks out OK on the Apple Diagnostic bench. Can a Logic board go intermittant?? Any Ideas any body??
Ive repaired 1000s of laptops over the years (translate: diagnose and replace parts).
Its not that old, Ive owned 100s of laptops (most were free) ....some I still have are nearly 13 years old and still perfect, ....some extremely expensive ones died in under a year.
other than becoming obsolete at some point, there isnt really any "will spoil on" data like Milk for solid state computer parts, ....alas.
You can have a $5000 laptop die in 4 months, and a junker one keep kicking after 10 years.... Ive seen that firsthand countless times.
Common logic dictates that "very expensive = long life" in computers,..... but all the repair people will tell you just the opposite.
I know you have a gripe, I get that all too well honestly . -
When I click on a .docx document Firefox thinks it is binary and saves it but does not open with MS Word. But it knows .doc is MS Word and opens it automatically (this is the behavior I would like with .docx docs.) In preferences -- applications - it is just says "content type" is "microsoft word document" but doesn't give a way to choose .docx specifically. Is there another way to do this?
Iam running Mac OS X 10.6.4 and Firefox 3.6.8 with MS Word Mac 2008Hi ,
According to your description, my understanding is that you could not edit documents with Office client application in SharePoint 2010.
Let’s do a troubleshooting about this issue:
1. Make sure that you have installed Office application on your machine.
2. Which explorer did you use for your SharePoint. Please test it with IE 10 32-bit, compare the result.
3. Please try to reset IE, compare the result.
4. Add your SharePoint site into Trusted site on your IE options.
5. Make sure all add-ons related to SharePoint are enable, special for SharePoint OpenDocument Class and SharePointOpenXMLDocuments.
6. Since you used OWA for your SharePoint site, please try to disable OWA, then open documents with client application, compare the result.
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support -
The scroll function from the pad/mouse does not work for the other tabs when a PDF file is opened.
Hi NSHS,
Have you checked to see if your PDF add-on is up to date? You should take a look at the [[Opening PDF files within Firefox]] Knowledge Base article. There is a lot of good information in there. You should try both of the suggested PDF add-ons to see if that fixes the issue.
Hopefully this helps!
Maybe you are looking for
-
Getting unwanted calls and messages
eventhough i have set my privacy policy, still i am getting unwated calls and messages. can you please advise
-
Artwork Issue (newbie question)
Hi guys, I have just submitted my first ever podcast but have a couple of questions re: the arwork. the feed is at http://www.new-images.com/podcasts/feed.xml the link to the podcast in the store is at http://itunes.apple.com/WebObjects/MZStore.woa/w
-
Error Using Screen Sharing (Not iChat)
I have a PowerBook and a G4 tower, both 10.5.6 and when I am using screen sharing I get an error: "Connection Failed to "********" Please make sure that Screen Sharing (in the Sharing Preferences section of System Preferences) is enabled on the compu
-
So here I am on a Saturday night looking at my photos and realized that iPhoto has gone completely cadywopmus. Viewing photos in iPhoto everything looks fine. Looking at my photos using Finder I now see, only in a few folders, that there are up to 5
-
TS1702 what happened to all of my purchased books in the iBook library?
What happened to all of my purchased books in iBook? When I go to store and purchased the message now says none available for download. I did have a lot.