HT204023 Personal hotspot does not appear

my personal hotspot does not appear ever since I updated my iPhone. How do I fix this??

My carrier AT&T DOES support this feature, and I have been a loyal user up until the 4.3.3 update, when it's totally not there anymore. What's going on? I'm seeing many who have this issue!

Similar Messages

Personas button does not appear in HTML

Personas button does not appear in HTML
Hi! I installed Personas 2.0 and finished most of the configuration. The Sliverlight component is working fine but when I switch to html component the personas button not appear.
I did all the settings. User have SAPALL and /PERSOS/ADMIN_ROLE with /PERS/AUTH and /PERS/AOBJ full authorizations. I use sap-ie=edge as part of the URL: http://xxxxxxxxxxxx:8000/sap/bc/gui/sap/its/webgui?sap-ie=edge&sap-client=100&sap-language=EN
Is there any other settings I can do?
I've SAP_BASIS 740 level 05 and Kernel 741 level 11 in Personas 200 SP 02.
Thanks,
Juan Manuel.

Hi Tamas! Does this mean that in SAP_BASIS 740 level 05 HTML is disabled and button never appears? Do you have any note or link where talk about it? I just need to access HTML for comparison with Silverlight.
thank you very much!

TA48312 now my iphone4 version is 6.0.1, personal hotspot does not works well as before, so i want to upgrade back to the old version 4.3.5,please help me

now my iphone4 version is 6.0.1, personal hotspot does not works well as before, so i want to upgrade back to the old version 4.3.5,please help me.

Downgrading is Not supported by Apple.
Unauthorized modification of iOS
http://support.apple.com/kb/HT3743

Personal Hotspot does not work after update to 10.10.2

Good morning!
After my update to 10.10.2 on my MBP (15" mid 2010) my connection to the internet via personal hotspot (iPhone 5s, iOS 8.1.3) does not work.
The MBP connect to the hotspot, but there is no connection to the internet. My iPad (Retina, iOS 8.1.3) works fine simultaniously with good bandwidth.
Rebooting Mac, rebooting iPhone etc does not work.
Anyone else has this problem?
Any suggestions?

Just saw same problem with a client's computer.
MacBook Pro
WAS 10.5.1.
Installed 10.5.2, booted up. Fire up ichat, get your buddy list. Double click a name, says "Cannot Chat" in bold then says "Add at least one person to this chat before sending the first messsage." with an OK button.

TS2756 iOS personal hotspot does not let any device connect after a connection from a 5 GHz band

I used my iPhone 5 with latest iOS version. When I connect my iphone to a 5GHz band at home and then ON the Personal Hotspot (PH), my ipad mini retina can't connect to the wifi of the iphone, it said "Unable to connect". I tried it with my laptop and got the same result. But if I disconnect it from the 5GHz and reconnect to a 2.4GHz band (at home too), then turn on PH, it will let other device connect normally.
I know that I can solve the problem by connect to a 2.4GHz and then turn on PH. But the problem is when I go out, every wifi around me is password protected, and I need to share PH to my laptop. it just won't connect. Do a Network reset solve the problem too, but when I come back home and connect to my 5GHz band, the problem still raise, PH will not let any device connect to it until I connect my iphone to a 2.4GHz and then turn on PH again.

Hi, thanks for your answers.
I have tried bluetooth tethering and it does work, but often i find has the same issue after a few minutes or if i let my device sleep, i have to reinitiate the hotspot. Whats worse is that i can go into the hotspot settings sometimes and it says "NOW DISCOVERABLE!" but nothing can see it, not my iPad, not my laptop, nor any other wifi enabled device until i toggle Hotspot off and on again.
Also, distance is an issue. Occasionally I like leaving my iPhone to charge on my desk to charge as tethering beats the battery up and if i go to the room next door, the bluetooth drops. If i don't come back within range in a few seconds, the hotspot becomes undiscoverable and I have to go through the process again. Overall this has not been a feasible solution for my issues.
As for resetting the network settings, I had to do this initially when I upgraded to iOS 5 as the Personal hotspot setting disappeared entirely. I had to do a full network reset, and reboot my handset once more for Personal hotspot to even return as a usable option but it didn't help the flakiness. This isn't an iOS 5 new issue though, as i said, it's been happening since 4.3...
All these super annoying first world pains eh? Again, thanks for your feedback but it doesn't help my particular issues.

Updated to iOS6 personal hotspot does not work

I just updated my phone to iOS6...I am now not able to use my phone to 'tether' internet service through my phone to my computer via USB...All was working well before iOS upgrade...
windows error says 'Windows couldn't automatically bind the IP protocal stack to the network adapter'
i've check all the drivers and they are up to date.
I've un-installed all Apple/itunes related programs and re-installed them....
I've restored my phone to factory and re-synced
Any suggestions?
Is there a way to roll back to iOS 5.1.1
Cheers
Computer is currently running Win7 in 64bit mode...

Well....
After some more digging..It turns out that AVG was the culprit for not letting my bind the protocol stack...
For those that have the same problem do the following:
Make sure that your phone is plugged into your computer, this way you will be able to see the network adapter for the phone
Running Windows 7(or any version, i would imagine)
a: Click start menu >Open control Panel
b: In the control panel search bar type in "Network"
c: In Network sharing >select 'View Network Connections"
d: Select the Network that is for the phone> Right Click> Select 'Properties'
e: Un-Install the protocol that has been installed by the security software..By highlighting the security protocol and selecting the un-install button
f: Re-start your computer....
Everything should be good to go

HT4623 person contact image does not appear while on a call,why?

person contact image does not appear while on a call,why?

when you say "Re-upload the image", do you mean reinsert it, or re-link it?
Neither.
Re-upload it to the web server from your local hard drive. In DW, click on the image file in the Files panel then click the Up arrow to Put the image to the server.
If that does not work, do as Nancy suggests and re-create the image in your image editor then re-upload.

How can I show the photos of the person that im calling? now that im using IOS 7 when i want to call someone the photo /imagine does not appear , how can i fix it? iPhone 5, iOS 7

how can I show the photos of the person that im calling? now that im using IOS 7 when i want to call someone the photo /imagine does not appear , how can i fix it?
iPhone 5, iOS 7

jlfcba wrote:
IOS 7.1.1 doesn't show a "days to sync" parameter anywhere in SETTINGS/Mail,Contacts,Calendars/ACCOUNTS/GMAIL Account/ GMAIL Acccount Info. There is nothing in iTunes relating to such an option either. So, it seems I'm back to square one.
If you have a decent mail provider like Microsoft Hotmail or Outlook.com mail it does.
If you have Gmail it does not. Quite right. Gmail is rubbish.

My DigitalPersona Personal is no longer working. It does not appear so I can use my fingerprint to fill in user names and passwords.

The DigitalPersona Personal icon does not come up now that I've installed Firefox 4.0 beta.

I found a reference to workaround on an HP forum that has solved the problem for me. DP does not support FF 4 and the company does not plan to do so in the future. However, there is a Firefox AddOn called FingerFoxSE that bridges the incompatibility of DP and FF 4. I have installed it and it works fine. You will have to manually register all of your user names and passwords again but FingerFox handles the web pages and then calls DP to verify the password instead of having FF call DP directly. I am running Windows 7 with FF 4 final ad DigitalPersona 4.10.3790.
https://addons.mozilla.org/en-US/firefox/addon/fingerfox-se/

Why is elements better at photomerge than CC- CC does not appear to automatically fill image based on content but elements does when merging a panorama. Also the stitching is visable in CC but almost perfect in elements- why?

I took 6 panorama shots of a scene and used CC to Photomerge them as one. Couldn't see where to automatic blend the edges and there was 'stitch' lines when the images were merged. So i did the same in Elements 11 and it was perfect. Am i doing something wrong in CC or perhaps not doing something at all?
Any help, please?
Dave

Hi - Thanks for taking the time to reply and i appreciate the remarks- if a little harsh- we all have to start somewhere and i am fully aware of the limitations of Elements which is why i decided to add CC to my software. I can only say that if an inferior quality software from Adobe does the job well then CC must also be suited to doing the same which is why i can only think, from your comments, that i have not done something simple- however- following tutorials to get to the end result should have sufficed- it didn't so perhaps i will consider posting the difference between the two applications- and, perhaps suffer a few more 'harsh' comments. The learning curve is quite steep and i am a visual learner, but i'm also not totally incompetent:)
Kind Regards
Dave Munn
Original message----
From : [email protected]
Date : 02/02/2015 - 06:45 (GMTST)
To : [email protected]
Subject : why is elements better at photomerge than CC- CC does not appear to automatically fill image based on content but elements does when merging a panorama. Also the stitching is visable in CC but almost perfect in elements- why?
why is elements better at photomerge than CC- CC does not appear to automatically fill image based on content but elements does when merging a panorama. Also the stitching is visable in CC but almost perfect in elements- why?
created by station_two in Photoshop General Discussion - View the full discussion
First a clarification: you are not addressing Adobe here in these user forums. You are requesting help from volunteers users just like you who give their time free of charge. No one has any obligation to answer your questions.
I'll give it my best shot anyway.
Few folks in this forum are really familiar with Elements, for which there's a dedicated, totally separate forum.
Different engineering teams, also.
From this perspective, it will be difficult to give you a direct answer to your "why?" question.
Personally, I blend very large panorama shots in Photoshop proper since I can't even remember when without any issues whatsoever, up to and including in Photoshop CS6 13.0.6.
Without being at your computer and without looking at your images, I couldn't even begin to speculate what you are doing wrong in Photoshop, which I suspect you are. The least you could show is post examples from your panoramas that have gone wrong.
I can tell you that panorama stitching requires significant overlap between the individual shots, besides common-sdense techniques like a very solid tripod and precision heads.
The only version of Elements I have ever used for any significant time was Elements 6 for Windows, which I bought in 2008 to use on a PC (I've been an avid Mac user for 30 years). I found Elements so limited and so bad that I successfully demanded a refund from Adobe. IU mention this only to emphasize that I can truly only address your question from a Photoshop (proper) and Mac user point of view. I couldn't care less about Elements, but if you have comparison examples of panoramas processed in both applications, by all means post those two.
Generally speaking Photoshop is a professional level application that makes no apologies for its very long and steep learning curve, while Photoshop has many hand-holding features for amateurs and beginners.
Perhaps the bottom line is that you should stick with Elements if you personally manage to get better results there.
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7152397#7152397 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7152397#7152397
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Photoshop General Discussion by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Why new Spacer Item cretaed through personalization does not appear in SSHR

SR # 6987444.993
Customer : VIRGIN ATLANTIC LIMITED
RELEASE : 11.5.10 CU 2
Patchset: FP K RUP 2
A Space Item created through Self Service Personalization Does Not Appear in Self Service HRMS Page.
Responsibility : Employee Self-Service
Click on "Personal Information".
Navigate to : Personal Details Region
Click on : "Personalize Basic Details" hyperlink.
In the "Personalize Region : Basic Details" page that opens, in the
Personalize Structure Region : "Complete View" option button is enabled.
In the Style column choose the Value : Default Single Column
Click on "Go" button.
Corresponding to : Default Single Column: Basic Details, Click on "Create Item" icon.
In the "Create Item" page that opens, choose : Level: Function: Personal Information
Item Style : Spacer
ID : Vishu
Admin Personaliation : True
Height : 30
Width : 10
Click on "Apply" button.
Click on "Return to Application".
Simulated in CELALNX10 and crm-au-r12 instance but in both the instances the Spacer items is not appearing.
Does the information specified in Note # 236618.1 - OA Framework Personalization and Extensibility Guide: Version 5.7+
under the Section : Create/Update View Page
is related to this?

Check that you have specified the HEIGHT and WIDTH properties of the spacer!
Also, you have created an item, but make sure that it is RENDERED=TRUE at the personalisation level for your responsibility.
It is good prectice to create an item and render it FALSE. Then go to the specific personalisation level you require and set RENDER=TRUE.
Also, there is a better document than the one you refer to. Try looking at MetaLink document id 268969.1 - Oracle Framework Personalization Guide (OA Framework 11.5.10).
Let me know if that helps.
Regards
Tim

When an image is inserted here using clipboard, it appears in the editor, but it does not appear in

when an image is inserted here in forum po editor using clipboard, it appears in the editor, but it does not appear in the post. When the image is inserted from a file, it works

Im not completely sure, why you are pointing out the very same thing I'm pointing out too. If you re-read my original post thoroughly, you will find - at its very end - the sentence "When the image is inserted from a file, it works". Since I'm not aware of the way how to insert the image from a file in a procedure other, then clicking the "camera" icon, I hold such a sentence for more then enough to point out, that the camera icon works fine for me (if you re-read my post thoroughly and pay detailed attention of my expression "using clipboard", then you shall definitely evaluate this expression as covering both ways an image can reach the cliboard, eg. Copying from a graphical editor/processor or dragging&dropping a graphical file).
However more then this, your post does in fact NOT reply to the fact, why the WYSIWYG editor box allows the insertion of an image from clipboard, but then fails to upload it and thus it is not displayed in the post.
For the sake of completness, I must also point out, that your last sentence of your post "And that's what it is there for" does not bring much clarity about that thing - while I fully understand, as one can observe from my "When the image...it works" sentence, the functionality, purpose and propper handling of the "camera" icon, I cannot agree with such a behaviour of the editor, that allows an operation to be done (What You See) that does not affect the outcoming result (Is What You Get).
From the theory of designing (G)UIs one may learn, that in such a case the operation should either fulfill completly (eg. display the clipboard-inserted image in the resulting post) or fail completly in the beginning (when Pasting the image into the text), either silently (just not displaying the image in the editor field) or with an error warning such as "Insertion of images/bitmaps from clipboard is not permitted". For Windows-like environments (such as, but not limited to, Microsoft Explorer, KDE, Gnome, IceWm....) the change of the dragging cursor to display a kind of "No way" or "no entry" pictogram, is also advisable.
For the sake of completness of my reaction I also might percieve your last sentence as a kind of irony or sarcasm, which however I definitely do not find appropriate behaviour, more over I might call it an "arogant rudeness" in case of such a "VIP" member with more then 9000 posts in the time when this post is being written, with a hint of overworking, malicous intends, inattention, ego-centricism or any other personal failure(s) or a combination of them, that you should - in case they are present - definitely pay attention to in your private life.
Moreover, let me please point out, that Im not much pleased about the way this forum works with its users, since I find the bug I have discovered, only a small one (a category B one might say in the A-B-C scheme, eg. a category, that does not directly influence or prohibit the execution of the main business cases, however it may result in discomfort, data loss or operation repetition, such a category would be most possibly a category C in the A-B-C-D scheme). Therefore I must explicitly express my annoyance that you have the guts to handle the post I did like this, when - in my opinion - the post has been written in such a manner that it was merly a polite point out of a small bug, thus it was kept as brief as possible, but fully covering the description of the scenario, alternate scenarios and their outcomes. Moreover, I'm definitely displeased, that you allow yourself to post such a post, that - instead of exploring the matter - throws the whole matter on the head and inside-out, or, one may say, kicks the bucket, and forces the original author, in this case me, for re-accounting for himself, moreover the ambivalency of your post opens such many possibilities to account for, that the time and resources the self-accounting autor has to spent, heavily overweighting the importance, significance and impact of the bug itslef.
So let me please advise you for the next time:
- to explore posts with more thoroughness, evaluating their expressions and sentences much more deeply, rather then just glance through on their surface
- think twice before answering and try to figure out how such answer might be percieved
- try to do less posts, but with higher quality
- try to employ more politeness and correct behaviour
- approach the matter with more humble and curious attitude rather then with a "I-know-everyting-better" standpoint
With regards
Lukas Plachy
Misstypes corrected by rheingold.

HT4053 How do I delete photos, the delete button does not appear to be working?

I have downloaded all my photos to my new IPad. I need to delete some I do not want, how do I do it. The delete button does not appear to be working?

I personally don't know of any other software that does syncing, however, you can use another cloud service like Dropbox or Flikr to house your photos, add and delete them and have them available for viewing on any device or comuter that has an internet connection.
I'm not sure why you would be having trouble not getting photos that you put into your Photo Stream Uploads folder on your iPad. Photo Stream is Photo Stream. Also, just so you know, photo management and Photo Stream have nothing to do with iTunes. Photo management on the computer is done through your photos folder and app (on a Mac, it's iPhoto). You only use iTunes to tell the sync process which items to retrieve and sync from that library. Photo Stream is completely independent of iTunes altogether.
If you want to get photos from a camera to your iPad without having to use a computer, get a camera connection kit which will allow you to physically hook the camera to the iPad, and to directly download the photos from the camera to the iPad.
You would still want to also hook the camera up to the computer to back those photos up to your photo library on your computer.
Also you might want to look into purchasing (for under $5) iPhoto for your iPad:
https://itunes.apple.com/us/app/iphoto/id497786065?mt=8
Seems like you might benefit from talking to your local Apple Store about when they might have some sessions for learning photo management and sharing between your device and computer, because what you appear to be wanting to do is all do-able. I guess I'm just missing what your issue is. You can many things with photos on your iPad, however, your device will never be a substitue for your computer for backing up and managing your photos.
So, best of luck, I hope one of the suggestions above will help you to achieve what you are trying to do.
Cheers,
GB

"@" symbol does not appear in recipients SMS messa...

When I type the message on my MAC (OSX10. or on my iPhone 4S (os6) it looks good but the reciepient does not see the "@" symbol. It instead shows as a "Space" I have contacted the skype team by a chat window and went through to the etchnical support person who was still unable to provide a solution. I have sent screen dumps of all this to them 10 days agao but have not had a reply. I hope the community can help. I want to sent an SMS message advising of my email address but as the "@" symboll does not appear, I can't use this method. I have tried to send it to my iphone 4S from my mac and also tried to send it from my iphone 4s to my wife's iphone 3gs. Each time the "@" sysmbol appears fine on the sent side but only shows as a "Space" on the reciving side.

I am having this same problem when I send a text message to a customer I have been symply been ending my text with my email address so they have a means to reply but unbeknownst to me it has sent with the @ symbol my end but not recieved. Why?

Calendar item does not appear in day view for Sunday August 1, 2010

I have a strange problem. I have an appointment on Sunday August 1, 2010. When in day view, and move from Saturday July 31 to Sunday Augsust 1 the appointment does not appear. However, if you look at list view or month view, it is there. If you continue to Monday and then go back to Sunday (all in day view) it appears. There is another person in my office with the exact same problem, so I know it is not just my phone. Anyone else have this issue? Any fix? I am concerned about appointments I will miss because of this. I added appoinments directly into the phone, no server, no exchange, no sync, same problem. It appears to be a bug in OS4.

Refer following link for understanding & solution:
Accounting document not posted from billing document SD module
Hopefully this can assist you.
Thanks & Regards
JP

HT204023 Personal hotspot does not appear

Similar Messages

Maybe you are looking for