HT204023 Xbox keeps telling me to change it's Nat type to open for them to run properly together, how do I do that?

When using iphone 5 as hotspot for Xbox 360, how do I change Nat

When I manually download and install I get the message I already have a later version.
Doublechecking before proceeding. Do you also get that message if you try to install the most recent version of Bonjour?
(There's a few different possibilities afoot relating to damaged installation configuration information for Bonjour on the PC here ... fingers crossed, the answer to my question will help narrow down the possibilities.)

Similar Messages

(PS3)Changing NAT TYPE to Open for router WRT150N

I need help chaning the NAT Type to open because I can't play with some of my friends on Playstation. Tell me how please
loans personal

A known issue with Linksys routers is the NAT Type 3 or anything related to dropping of Internet connectivity during play time. Network Address Translation (NAT) is the ability of a router or firewall to translate a public IP address to a private IP address and vice versa. It adds security to the network by keeping the private IP addresses hidden from the outside world.
Gaming consoles such as Xbox 360®, PlayStation®3, and Wii™ often encounter NAT related issues resulting to poor gaming experience. This problem is resolved by checking the settings on your router which contribute to NAT issues.
This is due to the built-in firewall of the router and to get past this, you will need to open ports on the router. You may do this by either doing Port Forwarding or Port Triggering. Once the ports are successfully opened, the NAT Type issue will change to Open or Moderate thus, making the gaming console work.
Here is the link which resolve the issue: http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=2902de6218ed4dc1a4c595595ca1f60a_Resolving_NAT_Typ...

I created an new apple id and want to change my billing information from the old id to the new id. How do i do that, as i have been trying it like always and it keeps saying that i have to contact apple support? I have an iphone 5S.

I created an new apple id and want to change my billing information from the old id to the new id. How do i do that, as i have been trying it like always and it keeps saying that i have to contact apple support? I have an iphone 5S.

Good day BenithaK,
Once you have changed your Apple ID, you need to set it up for use in the various systems such as iTunes, the App Store, etc so it can be used as intended. This article shows how to do that -
Apple ID: What to do after you change your Apple ID - Apple Support
To change your iTunes billing information for either Apple ID account, follow the directions in this article -
iTunes 12 for Mac: Manage your iTunes Store account
Thanks for using Apple Support Communities.
Safe computing,
Brett L

HT1766 I cannot backup my iphone, it keeps telling me the backup is corrupt and not compatible. All forums have suggested I delete the last backup but that was months ago and I'm afraid if I do that and it still doesn't work, I won't have anything saved

I cannot backup my iphone, it keeps telling me the backup is corrupt and not compatible. All forums have suggested I delete the last backup but that was months ago and I'm afraid if I do that and it still doesn't work, I won't have anything saved. Can anyone help?

Try to connect in recovery mode, explained in this article:
iOS: Unable to update or restore
Before that, back up your device, explained here:
iOS: Back up and restore your iOS device with iCloud or iTunes
How to back up your data and set up as a new device
You can check your warranty status here:
https://selfsolve.apple.com/agreementWarrantyDynamic.do

Trying to change my NAT type from Open to Strict or Moderate.

My NAT type is open but I can't get any games. I told my friend and he said try and change my NAT type from Open to Strict, and that it might help in joining games. I can join CoD4 games, but not MW2 or MW3 games. Can anyone help me? I am playing on XBOX360 and I use wireless internet.

A known issue with Linksys routers is the NAT Type 3 or anything related to dropping of Internet connectivity during play time. Network Address Translation (NAT) is the ability of a router or firewall to translate a public IP address to a private IP address and vice versa. It adds security to the network by keeping the private IP addresses hidden from the outside world.
Here is the link, which will you in resolving the concern: http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=2902de6218ed4dc1a4c595595ca1f60a_Resolving_NAT_Typ...

Is it possible to change the tempo mid-song in GarageBand for iPad? And if so, how do you do it?, Is it possible to change the tempo mid-song in GarageBand for iPad? And if so, how do you do it?

Is it possible to change the tempo mid-song in GarageBand for iPad? And if so, how do you do it?

The tempo setting applies to the whole song, but only to the recorded midi instruments or loops. It's a bit of a kludge, but you could record different sections at different tempos, export each as an AIFF file, then glue them together in a new project.
The same goes for the key.
tt2

I keep geting re-directed to a wrong site after I click on the search result site. How can I prevent that?

I keep geting re-directed to a wrong site after I click on the search result site. How can I prevent that?

iPad or Mac?

[svn:fx-4.x] 14731: change the line ending to LF so this script will run properly on Mac and Unix .

Revision: 14731
Revision: 14731
Author:   [email protected]
Date:     2010-03-12 11:06:04 -0800 (Fri, 12 Mar 2010)
Log Message:
change the line ending to LF so this script will run properly on Mac and Unix. Some testsuites were breaking because this script was not executing properly on mac
QE notes: fix for testsuites
Doc notes: no
Bugs: no
Reviewer: no
Tests run: no
Is noteworthy for integration: no
Modified Paths:
    flex/sdk/branches/4.x/bin/fontswf

On reflection, it seems much easier/safer to do something like this instead...
When running in Arch, but viewing a partition with another installation's data on it, do directory listings like this:
ls -l | FILTER
where FILTER is a script that pulls out the Arch-announced users and groups, converts them to numeric if necessary (according to Arch's understanding), and then stuffs back in what the other installation thinks are the symbols corresponding to those numbers. This was easy enough to do, and doesn't risk breaking anything.
Marking as SOLVED, but I'd still welcome feedback about the different ways different distributions understand the groups I cited. It's very hard to track this info down.

Need help opening NAT type to OPEN on a model WRT54GS router for xbox 360

I have tried from other people's advice and when i test Xbox Live i always get a Moderate NAT type. I am becoming frustrated with how it is not working and I am hoping someone can help me. Please leave advice/suggestions and thank you for your time.

Open the setup page of the router using 192.168.1.1 by putting the password as admin with username as blank & click the Administration tab & on the same page you will see UPNP.You need to select it as disable in order to help opening NAT type to OPEN.

Apple update keeps telling me I need Bonjour installed but, fails to install. when I Download and install manually I get the massage that I already have a later version. How do I get apple to recognize its already there?

Apple update keeps telling me new software is available "Bonjour for Windows 1.0.6" When I try to install it, it fails. When I manually download and install I get the message I already have a later version. How do I get apple to recognize it's already there?

When I manually download and install I get the message I already have a later version.
Doublechecking before proceeding. Do you also get that message if you try to install the most recent version of Bonjour?
(There's a few different possibilities afoot relating to damaged installation configuration information for Bonjour on the PC here ... fingers crossed, the answer to my question will help narrow down the possibilities.)

Window sizes settings have somehow changed and my windows do not open in the correct size anymore. How do I get my original window sizes to come back PERMANENTLY?

After upgrading to FF 10.0, my window sizes are not correct. I use a web-based invoicing system and my invoice windows used to open to the size of the invoice. Now, it opens invoices in full screen. I need the invoice windows to open the way the site tells them to open. How do I make that happen again and never change after that?

Safe mode disables the installed '''Extensions''', themes ('''Appearance''') and '''Plugins''' in '''Tools''' ('''Alt''' + '''T''') > '''Add-ons'''. So it could be that an extension is causing it. You can try to isolate it starting with script blockers and similar extensions and '''Disable''' or '''Remove''' it.
Please also note that safe mode also disables hardware acceleration: '''Tools''' > '''Options''' > '''Advanced''' > '''General''': '''Use hardware acceleration when possible'''.
[http://kb.mozillazine.org/Problematic_extensions Problematic Extensions]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
[http://support.mozilla.com/en-US/kb/Uninstalling+add-ons Uninstalling Add-ons]
[http://kb.mozillazine.org/Uninstalling_toolbars Uninstalling Toolbars]

How to change the NAT type to Open on a Imac using bridged connections

Hey everyone I have a problem. I play xbox live with my friends and i just moved and dont have a wireless adapter anymore. so i have bridged connections with my imac and xbox via ethernet. It works perfectly, but the only problem is that when i connect it say that my NAT type is strict. To play with all my friends i need a open NAT type. Does anyone know how to make the NAT type on the Imac open. And i do have a D-link router model DIR-625. When i called D-link they said to port forward, i did and it still didnt work, they said it must be the fire wall on the mac, microsoft said the same thing, that it might be the fire wall. I checked the fire wall and it said "All Incoming connections are allowed".
I would really much appreciate it if someone helped me. Thank you!

Yes, most likely. Microsoft has provided a list of XBox LIVE!-compatible routers. Since the OS X Internet Sharing feature is limited, there is no way to configure port mapping or placing the XBox in a DMZ with it. Typically, you either use a compatible router or configure port mapping/DMZ for non-compatible routers.

How do you change the NAT Type to Open?

Hey everyone, I bought the apple AirPort Extreme Base Station (The tall one) and I've bought the xbox one. So I tried joining a party and it didn't work so I checked my nat type and it showed strict how do I make it open ?

You must manually port forward all the ports required because the AEBS does not conform to upnp standard used by MS.
See Tesserax documents for port opening.
https://discussions.apple.com/docs/DOC-3415
Just look up what ports the game requires.
This is the min required for xbox live to work.
Xbox Live requires the following ports to be open:
Port 88 (UDP)
Port 3074 (UDP and TCP)
Port 53 (UDP and TCP)
Port 80 (TCP)
Port 500 (UDP)
UDP Port 3544 (UDP)
UDP Port 4500 (UDP)
http://support.xbox.com/en-AU/xbox-one/networking/network-ports-used-xbox-live
About time apple realise since they don't make consoles anyway it is time to actually help people who do.

Trying to change NAT type to open from strict

I'm trying to change my NAT type on my PS3 from strict to open. My router is a WRT120N and I'm using cable internet. Please help me, and sort of dumb it down so I can understand what you're saying. Thanks a ton!!
fake watches

i think strict NAT type is a double-NAT setup. it would really depend on your modem. what's the brand and model of your modem? does it have routing capabilities? what IP address does it give off?

I have icloud on all my devices I changed my email address and my password for them, but I can't seem to change it all for icloud. It won't let me. I keep getting a window popping up on all them asking to go to settings but in settings it won't allow me

I cannot seem to change my email address and password on icloud. I have changed it in itunes. But On all my apple products it will not let me, I just keep getting a window popping up on all of them asking me to go to settings but when I go into setting I cannot get it to change. Help !!!

Go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iPhone, then sign back in with your new credentials. If all you did was modify your existing ID rather than creating and entirely new ID, you can choose Delete from My iPhone when prompted. Your data will still be in iCloud and will download to your phone when you sign back in.

HT204023 Xbox keeps telling me to change it's Nat type to open for them to run properly together, how do I do that?

Similar Messages

Maybe you are looking for