HT204032 how can i figure out if my pro retina is mid 2012

update for powernap
what does mid 2012 mean.

Ok, this is what the support told me. I don't know is this is right but...
If I have done the update over the App-Store to 10.8.2, then it should not be necessary to update the Firmware. SHOULD... :-)
But still I tried and my mac told me that the update is not compatible with my system. It didn't tell me if it is updated or not, but it stopped the update. So I have not the possibility to update. Even I would need it...
What now. Are they right or not?!
And, is there a possibility to check the version I have on my EVI Firmware??

Similar Messages

  • How can I use airplay with Macbook Pro 9,2 Mid 2012/ Mac OSX Lion 10.7.5

    What do I need to do to play Airplay on Apple TV from my computer.  The option is not in my display setting, so, obviously, I do not have the capability.  Do i need to upgrade my software?

    You can't.
    About AirPlay and Airplay Mirroring
    AirPlay Mirroring requires a second-generation Apple TV or later, and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer). For non-qualifying Macs you can try using Air Parrot.
    Several Apple Articles Regarding AirPlay
    Apple TV (2nd and 3rd gen)- How to use AirPlay Mirroring
    How to set up and configure AirPort Express for AirPlay and iTunes
    iTunes- Troubleshooting AirPlay and AirPlay Mirroring
    iTunes- Using AirPlay
    Apple TV (2nd and 3rd gen)- Understanding AirPlay settings
    About AirPlay Mirroring in OS X Mountain Lion
    iTunes 10- About playing music with AirPlay
    Troubleshooting AirPlay and AirPlay Mirroring
    Using AirPlay
    Thanks to the $15 Beamer, AirPlay streaming is still possible on Macs  that do not support Airplay and mirroring.
    Other solutions are the Air Parrot, StreamToMe, and AirServer.

  • How can i figure out from my account page which kids ipad made purchases

    How can I figure out which childs ipad made an in app purchase from my main account - recent purchases page?

    As far as I know there isn't any way to see which device made the purchase

  • How can i figure out the answers to my security questions if i forgot the answers

    how can i figure out the answers to my security questions if i forgot the answers

    Welcome to the Apple Community.
    Start here, and reset your password, you will receive an email with your new password, then go tomanage your account > Password and Security and change your security questions.
    If that doesn't help you might try contacting Apple through iTunes Store Support

  • How can I figure out where are the heaviest volumes in order to get rid of the useless stuff?.

    How can I figure out where are the heaviest volumes in order to get rid of the useless stuff?.

    How about a few specific NOUNs to replace the vague references you have made. A little context.
    Volumes of WHAT ?
    What sort of STUFF are you trying to eliminate ?

  • How can I figure out if my bmp has Nvidia graphics

    How can I figure out if my bmp has the Nvidia graphics ?

    Does the label on the original retail carton spell out the detail further?
    Depending on the build model year and other identifier, more information
    may be obtained, even by use of serial number or model number online.
    Some private sites that may or may not be secure, are available; some
    may show varying degrees of the build information and specification...
    And there is this Support article from Apple:
    •How to identify MacBook Pro models - Apple Support
    Looks to be a newer model with Retina display, and Iris graphics.
    Good luck & happy computing!

  • How can i figure out my security question answers

    how can i figure out my security questions answers

    The Three Best Alternatives for Security Questions and Rescue Mail
         1.  Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
         2.  Call Apple Support in your country: Customer Service: Contact Apple support.
         3.  Rescue email address and how to reset Apple ID security questions.
    A substitute for using the security questions is to use 2-step verification:
    Two-step verification FAQ Get answers to frequently asked questions about two-step verification for Apple ID.

  • HT1688 how can i figure out a passcode on my cellphone?

    how can i figure out a passcode that was put on my phone, person locked me out of my phone

    You probably can't figure it out.
    You will need to restore the iphone

  • I see "imac-54f9d5" under the "Shared" heading in my finder. I am not connected to any printers or other Mac devices. Is it possible that someone is remotely accessing my system? How can I figure out what this is?

    I see "imac-54f9d5" under the "Shared" heading in my finder. I am not connected to any printers or other Mac devices. Is it possible that someone is remotely accessing my system? How can I figure out what this is?

    is it your imac?
    is it your your router's name?
    are you by any chance connected to another wifi router then your own because the other one was open and not password protected?

  • How can i figure out what device downloaded apps

    how can i figure out what device downloaded certain apps?

    One way is to remove all apps and then reinstall a few at a time while watching the "Other" memory indicator, but this will cause a loss of any data the apps are storing, like files, high scores, settings, etc.
    I don't know of an 'electronic' way of find this out.

  • How can I figure out what my password is and keep it unlocked?  Every time I do a system update, it requires the password and sends me into cyber trouble with the remember my keychain access, requiring it every time I log in.  A real hassle to be avoided

    How can I find out what my password on the computer is?  I had to change it due to my teenagers helping themselves, and now every time there is a system update, I have to have the password, which I cannot remember or find.  It then wants it every time I log in and pops up Key Chain Access as well.  Very annoying.  I do not have the disc to reload it and fear I would loose everything on my computer as there is also trouble with the back up system.  Too many issues and not enough solutions.  Many thanks in advance!

    I do not have the disc to reload
    Why not?  You need your system dvds to troubleshoot & to reset/change passwords in view of your current OS listed in your  profile. 
    You can get replacement System Install & Restore CD/DVDs from Apple's Customer Support - in the US, (800) 767-2775 - for a nominal S&H fee. You'll need to have the model and/or serial number of your Mac available.
    If you're not in the US, you may need to go through the regional Apple Store that serves your location to find the contact number. Here's a list of links to all of those - http://store.apple.com/Catalog/US/Images/intlstoreroutingpage.html Another resource:  International Support Phone #s.
    ===============
    I have to have the password, which I cannot remember or find.
    When selecting passwords, make sure it's one that you will NEVER forget AND no one else can figure out. 
    Old school--- > Print it out & keep in a safe place.  A place that ONLY you know about AND never forget.
    New school---> Get a password manager utility.  Highly recommend 1Password which is shareware.  Do a Google search for free password managers.

  • How can i figure out what my pin number is?

    i need my pin number but don't remember what it is how can I figure this out?

        josh0921, I know that being without your PIN can be quite the hassel. Just to be sure, are you referring to your billing account password or are you referring to a PIN used to unlock the device? If this is regarding your billing PIN when calling into customer service that cannot be changed, but can certainly be updated after completeing secondary verification over the phone. If you need to reach out customer service you can give them a call at 800-922-0204.  http://vz.to/XNtW61
    AdamG_VZW
    Follow us on Twitter @VZWSupport

  • I have a two different charges for one album. How can I figure out what each charge is?

    I purchased an album and got charged two different prices. How can I figure this out?

    As has already been said,  The onboard ethernet is 10/100/1000 and capable of autosensing which speed it's connected at.  
    What is more in question is the service you have.  I don't remember if cable is the same, but with DSL, there are two connection methods.
    1.  IP Based.  A static IP internet connection that is always on.  Usually three things are required information that can be given via your ISP.
    A) IP Address
    B) Gateway
    C) DNS Servers (Without these the PC cannot resolve DNS names so it doesn't know that http://www.website.com = xxx.xxx.xxx.xxx IP address.
    You can get there by right clicking Network Neighborhood, and click PROPERTIES.  Then right lick Local Area Connection and click PROPERTIES.  You can click the TCP/IP setting and click the properties button and enter the proper information to get you online.
    2.  PPPoE (Point to Point Protocol Over Ethernet).  PPPoE requires software from the ISP and usually all that is required is installation of the software and a USER NAME AND PASSWORD.  IP, DNS, and Gateway are all auto-determined by the remote server that the PPPoE software connects to.
    Does yours use one of these?  Most people use a combination router/firewall and plug in either settings.  If you've already configured your settings and are still getting no access, suggest the following:
    a) Reset your cable-modem, then your PC and try again.
    b) Check your cable connections.  You may have an intermittent connection on your net card/wire.  check the pins and look to make sure they make clean contact.  Try another cable to make sure there are no broken/intermittent conductors in the cable.

  • HT201472 If my ipod was stolen, how can I figure out if the find my ipod app is activated

    If my ipod was stolen, how can I figure outg if the find my ipod app is activated.

    - If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up.
    - You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
    - If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
    - Change the passwords for all accounts used on the iPod and report to police
    - There is no way to prevent someone from restoring the iPod (it erases it) using it.
    - Apple will do nothing without a court order                         
    Reporting a lost or stolen Apple product                                        
    - iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

  • How can I figure out, (and control), the sampling rate of my IMAQ board using LabVIEW?

    My IMAQ board is sampling at a certain rate and I do not know what it is... how do I figure this out using labVIEW? Also, how can I make sure that it is not waiting any time at all for sampling i.e. it is not waiting for any wait time functions or any of them other things that cause the program to slow. The reason that I want to do this is because the Kodak Imaging board that I am using seems to be delivering at a much higher rate and no my graph there are major gaps between each sample according to the time plot (for instance it goes from 178280 to 178290 all the way by 10's to 178340. But when the program is running continuously it has gaps of like 355 or so miliseconds I guess.
    Maybe that is just the time that it takes for the program to refresh itself, I am not sure. where could I find where this missing information is going?
    Thanks much,
    Brian

    Brian,
    Your IMAQ card should be sampling at the same speed of the camera, as long as your camera isn't exceeding the cards limits.
    As for how many images you're acquiring in your program, it depends on how long it takes for you to finish one loop of your code. It sounds to me that you may have a lot of processing happening after each grab, therefore slowing down the system.
    Try to comment out your processing (maybe with a case structure set to false) and output only your acquired images. See if that makes a difference. You might also try running this on a faster computer.
    BB_Phil

Maybe you are looking for

  • Philips Pico Pix PPX1020

    For the last 15 days I haver been struggling to get information whether the PPX1020 projector is compatible with macs. Having downloaded the Drivers for Philips - without any support or advise - I resorted to try the product before returning it to Am

  • Pages not syncing

    I have pages on my ipad. I sync files from my mac by dragging dem into icloud.com/#pages. Altough recently it won't sync either way. Not when I change a document, change folder name or when I make a new document. Does anyone have a solution? Both my

  • FC disk not available after storage repository creation failure

    Hi, A storage repo creation job failed because of some network problems. After I fixed up the network problem, I can create another storage repo with another FC disk. When I try creating the failed storage repo again, the FC disk is no longer availab

  • .qzt screensaver problem

    I have made a screensaver from a .mov with Quartz Composer, and it works fine on my mac. But when I send it to my friend (who has the exact same mac), she only gets a black screen in the previews in System Preferences.

  • Having trouble adding action script to button symbol

    Hello everyone: I am hoping someone will read this as I am a developer in 'dires straits' with Flash ( a newbie). My problem regards a layer called "button" which has already been converted to symbol and turned into an invisible button. The problem l