HT204051 Can you set a default WiFi network? Or is it possible to remove a near field WiFi network?

I want to set a default a default network to connect via wifi . Is it possible to automatically connect when in range?

Hi GymJockey67,
Thanks for your question. The resource below explains how to set your preferred Wi-Fi network as the default connection.
OS X Yosemite: Choose preferred wireless networks
https://support.apple.com/kb/PH18525?locale=en_US
Cheers,
Judy

Similar Messages

Can you set the Duration of a Transition to instant? Or Remove a previous?

Can you set the duration of a Transition to instant? (Rotate and Translate).
Or if not, remove a previous transition done? (Reset the transitioned object back to its original). Ihave tried setting Duration.millus(.000001), but I can still see it translate/rotate. if I set it to zero, it doesn't do anything at all.
Goal:
I have a Connect4 type grid that Flips. It rotates upside down 180degrees, the pieces 'fall' down. Then I ACTUALLY flip the game board (not just effects) using a matrix calculation. But since my grid is upside down, my pieces appear upside down.
So here is the method I was thinking:
-Flip the board upside down
-Translate the pieces down (gravity)
-Actually flip the game board's internals and positions.
-Undo the previous rotate/translate so the user thinks the 'animation' actually flipped the board.

You cannot create an instant Transition. An Animation with a duration of 0ms is considered invalid and does not do anything when play() is called.
Why do you have to use Transitions to set the values? They just modify Node properties over time, if you want to change the properties instantly, you can just access them directly. TranslateTransition modifies translateX, translateY, and translateZ, RotateTransition modifies rotate and rotationAxis.

Can you set a "default" web page in a KM folder?

Hi there,
I've been playing around with using Adobe Contribute to edit web pages in a CM Repository. It was easy to create a CM repository, put some web pages and supporting CSS, images etc. in there, and create a KM navigation iView that displays the default page. Setting up Adobe Contribute to edit those pages via a WebDAV protocol was simple too, and to be honest I find the Contribute interface and functionality easier to use (particularly from the average end user's point of view) and implement than the Portal's built-in HTML editor, or the Web Page Composer.
But then I ran into a snag. In order to be able to "administer" the site with Contribute (or Dreamweaver), it creates an _mm folder and puts a "guard" page in it. The guard page is a file which would be returned to the browser when it tries to access a folder. In a normal website that would be a "default" page (e..g index.htm, default.htm etc.), but in the Portal there doesn't seem to be a way to have one. I believe that's why if you try to access a folder through a browser you get:
"The folder you are looking for has no displayable content.
You can try one of the following:
Access the folder using the Navigation user interface.
Access the folder as a Web folder. Your operating system and browser dictate whether or not this will work."
That's what happens if I use something like http://<host name>:<port number>/irj/go/km/docs/<repository prefix>/<folder name>/ as a URL, though http://<host name>:<port number>/irj/go/km/docs/<repository prefix>/<folder name>/default.htm works just fine (as you would expect). And I can retrieve a fake "guard" page using http://<host name>:<port number>/irj/go/km/docs/<repository prefix>/<folder name>/_mm/default.htm
An Adobe technote confirms this as problem - [Guard Page not found|http://go.adobe.com/kb/ts_f3675780_en-us]. Does any one know if a default page can be set in a CM repository.
Regards,
Tom

I don't think you can.
What is possible is to set content on the folder resource itself; that would be returned instead of the page you mentioned.

Can you set the default alarm to be an email alert?

Just curious. I noticed that in the preference window, it allows you to set a default alarm that always starts as a sound.
Any plug-ins that will do this?
Thanks a bunch.

Try this add-on so you can schedule the sending of multiple emails:
https://addons.mozilla.org/en-US/thunderbird/addon/send-later-3/
http://chrisramsden.vfast.co.uk/3_How_to_install_Add-ons_in_Thunderbird.html
There's another add-on that might work in current TB versions:
https://addons.mozilla.org/en-US/thunderbird/addon/blunderdelay/

Can you set a default "Reply-To:" on a per account basis?

I have two accounts set up in Apple Mail. One is a work account, and the other is my personal iCloud account.
For my personal emails, I would prefer to have any replies directed to an "email-for-life" address. My college alumni association has a service, which is essentially an email forwarder. The beauty of this is that I am not tied to a particular ISP such as iCloud, mobileme, .mac, etc. If I change ISPs, I only have to update the infomation on the forwarding system rather that letting all my personal contacts know that my email address has changed. For them, my permanent email address is of the form "<firstname.lastname>@<college>.alumni.edu". As such, I cannot use that address as my "From" address, as mosts ISP requirethe From address for authentication. I suppose this helps prevent spoofing.
I have seen instructions for setting a Default "Reply-To:" address in Apple Mail by setting the UserHeaders in Mail prefs via a Terminal window:
To set: Enter the following in a terminal window:
defaults write com.apple.mail UserHeaders '{"Reply-To:"="[email protected]";}'
To review settings: Enter the following in a terminal window:
defaults read com.apple.mail UserHeaders
To clear settings: Enter the following in a terminal window:
defaults delete com.apple.mail UserHeaders
My problem is that this sets the default for all email accounts in Apple Mail. I only want to do this for my personal email account. I want emails sent from my work account to reply to the work email addresss.
Is there a setting on the defaults write ... command such that I can apply the UserHeaders to only one account?
Regards,
Tim

What you could do is first rename the record to be imported
IMPORT SOURCE_TBL AS PS_SOURCE_TBL_ORG;
Then write a insert/select script from PS_SOURCE_TBL_ORG to PS_SOURCE_TBL defaulting column EXCHANGE_RATE_OPTN
Insert into PS_SOURCE_TBL (COLUMN,COLUMN,COLUMN,COLUMN, EXCHANGE_RATE_OPTN)
select PS_SOURCE_TBL_ORG (COLUMN,COLUMN,COLUMN,COLUMN, 'defaultvalue');
And then drop table PS_SOURCE_TBL_ORG to clean up your database.

Tax codes - can you set up default value for rows and freight? HELP!

Hello - I have two issues with tax codes:
1. When adding a sales order if any of the rows do not have a value for "Tax Code" I will get an error "Row without tax was found".
- How can I get all rows on my sales orders, documents, etc to default to a specific tax code? Or will users ALWAYS have to enter the tax code?
2. When addring a sales order with Freight, if the order is added without adding a tax code to the freight I will get an error "Expense with tax was found"
- How can I get the tax code have a default value? We always use the same tax code, so it is redundant to have to enter this information.
Any suggestions?

Hi Jhon,
this is the simplest and best way to make a Tax Code default is Go to
Answer for Question 1
Administration -> Setup -> Financial -> Tax -> Tax Code Determination (Click on this)
in that screen you can set a default tax code for both sales as well as Purchase.
If you want to set Tax Code based on Vendors or Customers or Items separately then you can use the Key Fields.
Answer for Question 2
Once you enter the Tax Code in the freight i think it takes the Tax Code itself, I'm not so sure about this one though.
Hope this helps you out
regards,
Shreyas

Can you set a default value using Data Mover Scripts?

Hi,
We're going through a upgrade of PS Fin 8.9 -> 9.1. We've found some existing tables with new columns that are marked as NOT NULL so we're having trouble migrating the data using DMS.
Is there a way to Export the data from 8.9 and when importing into 9.1, set a default value for the new column using DMS?
A specific example would be the PS_SOURCE_TBL where EXCHANGE_RATE_OPTN is new and NOT NULL.
Thanks for any assistance.

What you could do is first rename the record to be imported
IMPORT SOURCE_TBL AS PS_SOURCE_TBL_ORG;
Then write a insert/select script from PS_SOURCE_TBL_ORG to PS_SOURCE_TBL defaulting column EXCHANGE_RATE_OPTN
Insert into PS_SOURCE_TBL (COLUMN,COLUMN,COLUMN,COLUMN, EXCHANGE_RATE_OPTN)
select PS_SOURCE_TBL_ORG (COLUMN,COLUMN,COLUMN,COLUMN, 'defaultvalue');
And then drop table PS_SOURCE_TBL_ORG to clean up your database.

CSV Export - can you set a default directory?

Can the "Save As" folder be defaulted to a specific location when exporting a report as CSV?
I want to try and get all users to store the exported csv files in the same location rather than having them saved on local C:\ drives or various other network locations.
I'm using HTMLDB 1.6 on Ora9.2

Theoretically yes but practically NO!
If yes, then user should install ActiveX(for IE) or java (FF and others) which will be called to determine that setting.
But my suggestion is to leave that setting alone...
BTW, any download that you have done on Interent...was it automatically or was guided by your decision?
;-)

Can you set a default print quality?

Good Morning Everyone,
I've been putting up with this annoyance since I install PSE 8. I've looked for a solution but can't find one. Hope you can help.
Here's the problem.
Every time I print a document PSE 8 defaults to a print quality of 1200 dpi, which take forever to print. So I have been clicking on
Change setting, then if I click on the drop down box for print quality the only choice is 1200, so I click on advanced setting and choose
normal (which is 600) click ok and print. But I have to do this every time I print. I'm using a HP C3100 all in one printer and I've check the printer
properities and they are set to a default of normal (600 dpi). Any ideas?
Thanks
Nancy

Nancy,
We have had several posts recently relating to printers and PSEv.8. Check on the HP site for updated drivers for your model. If there is an updated driver, install it. Let us know how you make out.

Can you set the default Filter under Admin tab in UCSM?

Such a minor and trivial question but just curious. It defaults to 'Faults, Events, and Audit Log'. A majority of the time that's all you'll need after initial setup, but I was wondering if I could somehow set the filter to 'All' as the default view.
Is this possible?

You can't, Apple would have to do this.

Can You set a Default Email Address when sending Emails

I have multiple email accounts set up. When I compose a new message, it always uses the send address of the message that is selected in the open window. Is there anyway to set a particular address as default or better yet don't pick an address and force me to select one from the pull down list?
Doug Eaton

Hello Doug.
Copied from Setting the account your email is sent from.
If you have set up multiple accounts in Mail, when you create a new message, the account the message is sent from is the one associated with the currently selected mailbox. If the current mailbox is listed in the On My Mac section of the mailbox list and is not associated with any particular account, then your message is sent from the first account listed in the Accounts pane of Mail Preferences.
You can select a different account to use to send the mail.
To send a message from a different account, choose the account from the Account pop-up menu when you're composing the message.
To change the order in which accounts are listed in the mailbox list, drag the account names into the order you want. You can also rearrange the account order in the Accounts pane of Mail Preferences.
Tiger Mail includes a default email account selection when selecting New to compose a new message regardless which mailbox is currently selected.

How can you set the default width of the 'Detailed Navigation iView'?

Hello,
we would like to reduce the default width of the 'Detailed Navigation iView' in order to save some screen space.
So far, we havn't found the right item in the portal admin to do this.
Any help would be much appreciated! Thanks in advance.
Frank Schülke, E.ON Ruhrgas, Germany

Hi Frank,
You can change the width of this navigation iview by changing the value of "defaultExpWidth" in the file WAandNAVPanel.js present in the par file com.sap.layouts.framework.par from default value 220 pixels to the value you want.
upload the changed par file and restart the server.
Hope this helps,
(if not do get back )
Regards,
Uma.
Do award points for helpful answers in SDN!!!!!!!:-)

HT1677 Where can you set default in Safari to view as web page instead of Mobile Version?

Where can you set the default setting in Safari to open page as web page instead of Mobile Version on iPad running iOS6.01?

And, to make it even more fun, sometimes a website changes how it deals with Safari Mobile. A website that treated it like a desktop browser suddenly starts treating it like a cell phone. Just to mess with you. Or push an app.
Best of luck.

Can you set PDF import 'Crop to' box to 'Media Box' as default (PSD)?

When importing PDFs into Photoshop, can you set the default selection in the Crop To box as Media Box so that it is pre-selected every time you import a PDF?

I have the same wish. Any solution?
Fredrik

Can you set default values for person/group picker fields? To current user?

Two-part question/issue . . .
Part 1:
In InfoPath 2013 in use with SharePoint 2013, how do you set a Default Value for Person/Group Picker fields? Other field types like Text Boxes have a Default Value section in the Data tab of Properties. There doesn't appear to be any equivalent for
the Person/Group Picker field type in Properties. I'd like to set a default person for a few fields in a form I've created. Is this possible?
Part 2:
The default user I want to set for one of those Person/Group fields is the "current user." I want a user to log into our SharePoint 2013 intranet, load a new form for edit/creation, and have one of the Person/Group fields in that form to
automatically populate this particular user. Is this possible?

Hi Stephen,
You can auto populate your InfoPath farm with current user Name and all other property that you have in your User profile, you have couple of options.
First you can make a secondary connection in your InfoPath form with user profile and can use the UserProfileService.asmx and call the GetUserProfileByName method. Here is the steps you can follow.
http://blogs.technet.com/b/anneste/archive/2011/11/02/how-to-create-an-infopath-form-to-auto-populate-data-in-sharepoint-2010.aspx
Secondly you can use JQuery and SPServices ,
$().SPServices.SPGetCurrentUser function to populate the values with script to achieve the same in this case you no need to use InfoPath form just create simple text type column in SharePoint
list and auto populate it with getting the current user Name from User Profile here is the scripts
<script language="javascript" type="text/javascript" src="../../jQuery%20Libraries/jquery-1.4.2.min.js"></script>
<script language="javascript" type="text/javascript" src="../../jQuery%20Libraries/jquery.SPServices-0.5.4.min.js"></script>
<script language="javascript" type="text/javascript">
$(document).ready(function() {
var userCurrentName = $().SPServices.SPGetCurrentUser({
fieldName: "CurrentUser"
$("input[Title='CurrentUser']").val(userCurrentName);
var userPhone = $().SPServices.SPGetCurrentUser({
fieldName: "WorkPhone"
$("input[Title='Phone']").val(userPhone);
</script>
Krishana Kumar http://www.mosstechnet-kk.com

HT204051 Can you set a default WiFi network? Or is it possible to remove a near field WiFi network?

Similar Messages

Maybe you are looking for