HT204053 2nd SD Card does not show up on desktop with out Restarting computer.

I have iMac. I use 2 sets (A1-A2 and B1-B2) of dual SD cards for 2 videography cameras. A1 and A2 are identical. B1 and B2 are identical. Initally all SD cards showed up on desktop. They erased in Disk Utility when I'd downloaded the data. Then suddenly w/ no changes to computer or software, only 1 card would show up when I inserted it into the SD slot. If I insert 2nd card, nothing showed up on desktop, in finder or in disk utility. BUT, if I did a Restart, with the 2nd card in the slot, when the computer came back on, behold, there it was. I downloaded the contents, erased it in disk utility. I need to erase 4 32 Gb SD cards and erase them. I'm currently rebooting 3 times to accomplish this. It's a HUGE HUGE time sink to do this every time I want to download from cards. What's going on with the rebook solution? and how can I get back to better functioning? Solutions please. Thank you.

Are you using the USB cable that came with the shuffle? The 2nd gen shuffle uses the USB cable with a mini-dock at the shuffle end. The USB cable for the 3rd and 4th (current) gen shuffle does not work, because the connector is different.
If you are using the correct USB cable... The shuffle will not continously appear on the Mac's desktop unless it is set to Enable disk use. So "does not appear on desktop" may be OK.
It should appear in iTunes. The latest version of iTunes may hide the sidebar. To show the sidebar, from the iTunes menu bar, under View, select Show Sidebar. With the sidebar visible, the shuffle does not appear under DEVICES in the sidebar when connected?

Similar Messages

What causes iphone 3gs every time I insert the SIM card does not show the screen or no service?

what causes iphone 3gs every time I insert the SIM card does not show the screen or no service?

If the iPhone was unlocked unofficially, it has been locked to original carrier again.

How do I eject a dvd that does not show on the desktop

How do I eject a dvd from the drive when it does not show on the desktop? I tried restarting and the drive makes noise but does not eject the dvd.

oldlarry wrote:
How do I eject a dvd from the drive when it does not show on the desktop? I tried restarting and the drive makes noise but does not eject the dvd.
Hold down the mouse button while restarting. This should eject any disc in the drive.

My iPad does not show me iTunes Radio with the new iOS 7 update

My iPad does not show me iTunes Radio with the new iOS 7 update

Hi, Abhishek642.
Thank you for visiting Apple Support Communities.
If you are a U.S. customer try forcing all applications to close and power cycle the device.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
If the issue persists, try signing our of the iTunes & App Store on the device and signing back in.
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/HT1311
For more information on iTunes Radio and it's availability, see the article below.
About iTunes Radio
http://support.apple.com/kb/HT5848
Cheers,
Jason H.

2nd video card does not work

I have a spare Mac Pro here so I decided to remove the video card and put it in the one I'm using. Both machines were purchased in '09 and use the same video card (ATI Radeon HD 2600). The two monitors I have hooked into the original video card work fine but the monitors I hooked into the newly placed video card are not working. Under the About This Mac specs >> PCI cards it shows up and says driver is installed. Is there anything special you need to do to get a second video card to work?
Thanks.

I tried the SMC reset. I removed the card and reseated it. I'm seating it in slot 2 because that's the only other one that is x16. The other slots 3-4 are x4. Still nothing is showing up. When I go to System Preferences >> Displays >> Detect Dispalys nothing happens. The two displays plugged into the original video card work fine but the newly installed on does not show up. Here is what the Mac Info is detecting. Maybe this makes sense to someone. Not sure what MSI is referring to and the second video card is reading as "display" instead of "ATI Radeon HD 2600". Link speed on the second card is half that of the original.
About This Mac >> More Info >> PCI Cards >> Slot-1
ATI Radeon HD 2600:
Name:    ATY,Lamna
Type:    Display Controller
Driver Installed:    Yes
MSI:    Yes
Bus:    PCI
Slot:    Slot-1
Vendor ID:    0x1002
Device ID:    0x9588
Subsystem Vendor ID:    0x106b
Subsystem ID:    0x00a6
Revision ID:    0x0000
Link Width:    x16
Link Speed:    5.0 GT/s
About This Mac >> More Info >> PCI Cards >> Slot-2
display:
Type:    VGA-Compatible Controller
Driver Installed:    Yes
MSI:    No
Bus:    PCI
Slot:    Slot-2
Vendor ID:    0x10de
Device ID:    0x0393
Subsystem Vendor ID:    0x0000
Subsystem ID:    0x0400
Revision ID:    0x00a1
Link Width:    x16
Link Speed:    2.5 GT/s

Graphics Card Does Not Show Up In Device Manager (Re: Installing AMD Video Drivers - Windows 8.1 (Step-By-Step Tutorial)

This tutorial is a step-by-step tutorial on how to "fix" issues of a new graphics card not appearing in Windows 8.1 Pro, or not appearing (as a device) in Device Manager, or it's not being detected by Windows 8.1.
This is the "second part" of a Step-by-Step Tutorial on how to install AMD Radeon graphics card drivers in Windows 8.1 Pro.
GRAPHICS CARD IS NOT DETECTED AND DOES NOT SHOW UP IN WINDOWS 8.1 DEVICE MANAGER
This problem can appear if the video card is not installed properly in the PCI slot and as a result the card is not detected in device manager. Check the physical connections again, reinsert the card properly in the PCI slot, check the connections (including the power cables going to the video card, and ensure that the fan on the graphics card is spinning and the card does have power and is properly seated/inserted) and then install the drivers from the manufacturer’s website.
If the video card is in fact installed properly, but the problem of the video card not being discovered/found by the operating system persists, then try these following methods below to check if this solves the problem.
Method 1:
First, I would suggest you to run the following Microsoft Fixit to get the problem automatically detected and fixed. This Microsoft "fixit" App checks if the device is currently disabled or turned off or the driver is not installed.
Hardware devices are not working or are not detected in Windows.
http://support.microsoft.com/mats/hardware_device_problems/en-us
Method 2:
Sometimes, some devices in device manager are hidden due to corrupt or missing drivers.
Follow the steps below to show hidden devices in the device manager and troubleshoot accordingly.
Press the Windows key + X
Select Command Prompt (Admin)
Type set devmgr_show_nonpresent_devices=1 and hit enter
Type Start DEVMGMT.MSC and hit enter.
Once in Device Manager hit the View menu and select show hidden devices.
From here, remove each instance of the AMD or Nvidia card you see as well as each unknown device. Exit Device Manager and reinstall the latest drivers you can find for your graphics card.
After you install the drivers, reboot and see if you get any different results.
If the above solved your problems and the Graphics Card is now working and is now being properly detected/displayed in Windows Device Manager:
If your graphics card is now being detected by Windows 8.1 in Device Manager, but has a "yellow exclamation" mark (or video drivers are not found or not properly installed or the device is disabled) then install the latest graphics card drivers and proceed with this Step-by-Step Tutorial on how to install AMD Radeon graphics card drivers in Windows 8.1 Pro.
Method 3:
If methods suggested above does not help, I would recommend you to contact Apple/AMD/NVIDIA to get the latest chipset, BIOS, graphics card drivers installed properly.

This tutorial is a step-by-step tutorial on how to "fix" issues of a new graphics card not appearing in Windows 8.1 Pro, or not appearing (as a device) in Device Manager, or it's not being detected by Windows 8.1.
This is the "second part" of a Step-by-Step Tutorial on how to install AMD Radeon graphics card drivers in Windows 8.1 Pro.
GRAPHICS CARD IS NOT DETECTED AND DOES NOT SHOW UP IN WINDOWS 8.1 DEVICE MANAGER
This problem can appear if the video card is not installed properly in the PCI slot and as a result the card is not detected in device manager. Check the physical connections again, reinsert the card properly in the PCI slot, check the connections (including the power cables going to the video card, and ensure that the fan on the graphics card is spinning and the card does have power and is properly seated/inserted) and then install the drivers from the manufacturer’s website.
If the video card is in fact installed properly, but the problem of the video card not being discovered/found by the operating system persists, then try these following methods below to check if this solves the problem.
Method 1:
First, I would suggest you to run the following Microsoft Fixit to get the problem automatically detected and fixed. This Microsoft "fixit" App checks if the device is currently disabled or turned off or the driver is not installed.
Hardware devices are not working or are not detected in Windows.
http://support.microsoft.com/mats/hardware_device_problems/en-us
Method 2:
Sometimes, some devices in device manager are hidden due to corrupt or missing drivers.
Follow the steps below to show hidden devices in the device manager and troubleshoot accordingly.
Press the Windows key + X
Select Command Prompt (Admin)
Type set devmgr_show_nonpresent_devices=1 and hit enter
Type Start DEVMGMT.MSC and hit enter.
Once in Device Manager hit the View menu and select show hidden devices.
From here, remove each instance of the AMD or Nvidia card you see as well as each unknown device. Exit Device Manager and reinstall the latest drivers you can find for your graphics card.
After you install the drivers, reboot and see if you get any different results.
If the above solved your problems and the Graphics Card is now working and is now being properly detected/displayed in Windows Device Manager:
If your graphics card is now being detected by Windows 8.1 in Device Manager, but has a "yellow exclamation" mark (or video drivers are not found or not properly installed or the device is disabled) then install the latest graphics card drivers and proceed with this Step-by-Step Tutorial on how to install AMD Radeon graphics card drivers in Windows 8.1 Pro.
Method 3:
If methods suggested above does not help, I would recommend you to contact Apple/AMD/NVIDIA to get the latest chipset, BIOS, graphics card drivers installed properly.

My ext HD Icon from a portioned drive does not show up on Desktop

I have an external hard drive with two partitions that both showed up on the the desktop. For some reason, one of the partitions stopped showing up on the desktop but does show up when viewed from finder, disk utility, etc.
I ran permissions, relaunched, etc. One of the partitions still does not show up- very frustrating. I looked at info, preferences, etc. and can't figure it out.
I plugged the hard drive into another computer and both show up there...
So any help will be greatly appreciated.
Skip

Hello markshepherd1,
Thanks for using Apple Support Communities.
According to the following article, when you're going through the process of burning a playlist to a disc, you have the option to select "Include CD Text".
If you’re creating an audio CD, choose your options:
Change the recording speed:
Choose an option from the Preferred Speed pop-up menu.
When you burn an audio CD, iTunes automatically uses the best recording speed for the CD. However, if your blank CD is rated for a slower speed than the maximum speed of your drive, or if you experience problems creating CDs, you may want to change the recording speed to match the CD’s rating.
Change the amount of silence between songs:
Choose an option from the Gap Between Songs pop-up menu.
Have all the songs on the disc play at the same volume:
Select Use Sound Check.
Include information that disc players in some vehicles can display:
Select Include CD Text.
iTunes 11 for Mac: Create your own CDs and DVDs
http://support.apple.com/kb/PH12148
Take care,
Alex H.

INPUT textfield does not show non-English letters with transparent mode

INPUT textfield does not show non-English letters when i
type, if transparent mode turn on
this is bug of Flash Player 9?
will this bug had be fixed?

I just tested Firefox and Chrome on linux, i doesn't work either, but i get different weird chars: Ã©Ã¨Ã§a
However, on both mac and linux, if i copy the chars and paste them in the input field, it passes.

LightRoom 2.3 Does not show up in "open With" when image right clicked..Why?

Hi,
I noticed that when I right click on an image and highlight OPEN WITH LightRoom does not show up as a choice.. Just CS4 and other programs. Is there a way to get it to show up?

You can do it. Right-clicking and "opening with" LR is no different than dragging a file from Windows Explorer into the grid view. In either case the import dialog will be launched. If it's already in the catalog you'll get that dialog.
Windows is seemingly unpredictable from time to time as to adding file associations to the context menu. In any case, if you go to the bottom and click "choose program" you can select LR from the expanded list, or navigate to find it if necessary (which shouldn't be necessary).
Typically once you choose it once, it will continue to appear in the short list for that file type, though it depends what new pieces of software you install and how they're associated with file types either upon or after installation.
You can also drag the file(s) from your Explorer window into the grid view, or drag onto the LR icon on your desktop or in your quick launch, which will launch LR and bring up the appropriate dialog.

White swatch does not show on PDF or print-outs...

Hi,
I've been noticing this glitch with the white swatch option more and more:
When I apply it to objects, it appears in the file, but when I generate a PDF it vanishes, and of course does not show on the print-out either.
Also, it won't show up on the print-out directly output from Illustrator.
Anyone seen this issue?
When I change the color to anything else but white, the graphics show up again.
Thank you.

If you turn on Overprint Preview in Illustrator, does it also disappear?
Overprint may be turned on, check the Attributes pallet, and uncheck Overprint Fill and/or Overprint Stroke.

I have been trying to download a new update and it goes thru the strokes and restarts but the update version does not show when I go to "about this computer" to see what version is on. Any ideas what is wrong?

I have been trying to download an update on my MacBook Air and it goes thru the process and restarts but the update does not load. I know it is not loading because when I go to " About this computer" the version does not show it updated. Any help would be appreciated. Thanks

trying to download an update
v10.6.8 is as far as Snow Leopard can be updated.
Which update are you trying to install ??

Shuffle does not show up on desktop or in iTunes

Older iPod Shuffle (2nd version) does not appear on desktop or in iTunes. It does play with earbuds attached so I know it is functioning.Have tried all the suggestions to no avail.
Thanks,
Pete

Are you using the USB cable that came with the shuffle? The 2nd gen shuffle uses the USB cable with a mini-dock at the shuffle end. The USB cable for the 3rd and 4th (current) gen shuffle does not work, because the connector is different.
If you are using the correct USB cable... The shuffle will not continously appear on the Mac's desktop unless it is set to Enable disk use. So "does not appear on desktop" may be OK.
It should appear in iTunes. The latest version of iTunes may hide the sidebar. To show the sidebar, from the iTunes menu bar, under View, select Show Sidebar. With the sidebar visible, the shuffle does not appear under DEVICES in the sidebar when connected?

When I use Firefox to monitor changes I do to HTML files locally, it does not show changes to images unless I restart the browser. Is this a bug?

I have the local and the remote versions of a page open in two tabs. I change one of the images (keeping the same name in the HTML) and upload the changed image. The tab that shows the remote page only takes a refresh to show the change. The tab showing the local page not. I have tried opening it in a new window but it still does not change. Only if I restart Firefox does it show the change. Why? Is this a bug?

grantheaslip's suggestion doesn't work for me; no change at all. (Thanks anyway.) Any other ideas? Is there another way to "hard" refresh? I don't see anything in the menu.
Also, it seems like this is a very recent problem. I thought in the past that a regular refresh did the job.

Hard drive does not show up as back up for my computer

hi had a few things replaced by apple (lcd display, logic board) along with my hard drive. I had been using time machine to back up on this machine. now that it is back it is not recognizing that hard drive as housing my back ups. the back up hard drive shows up on the desktop and disk utility, but when i try to restore from my dvd it searches but does not find it. If i control click on the dock icon and say browse back up disks it does not come up there either. have looked on boards but cannot figure out what i am doing wrong.

The first question to answer: Is the problem with my router or with my MacBook?
Test your MacBook on other wireless networks in other locations and/or try connecting to a wireless network created by another router or two in the same location.

2nd Generation Nano does not play all the songs with Album Art.

Hey My 4G 2nd Gen. Ipod Nano will not play none of the songs that have Album art. It was fine for a long time but recently it just skips right over all of the songs that have a picture, and all of the songs that it skips are from the itunes store. I need help really bed, because it is bugging me. I reset it and everything, and it still will not play thoes songs. PLEASE HELP!!!!!

See this.
iPod does not play content purchased from the iTMS.

HT204053 2nd SD Card does not show up on desktop with out Restarting computer.

Similar Messages

Maybe you are looking for